| Age | Commit message (Collapse) | Author |
|---|
|
Should prevent the crash mentioned in #1779.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Show the correct wifi chip identification in case iwinfo
recognises the chip.
So far the wifidev.get_i18n function has practically always
returned just "Generic", but use iwinfo.hardware_name to
fetch the name.
In case iwinfo returns the default "Generic MAC80211", there
is a double 80211 in the final string, which is a cosmetic bug.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
* fix wrong private function call to handle
section id as parameter (fix for #1687)
Signed-off-by: Dirk Brenken <dev@brenken.org>
|
|
Use the new luci.ip MAC address facilities to parse and verify MAC addresses
in a common way, instead of relying on various ad-hoc solutions.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
If IPv6 prefix assignment is disabled, the "local-address" structure
might exist, but be empty which causes the adress formatting in the
network model class to bail out.
Verify the completeness of the "local-address" structure before using
it in order to avoid runtime errors.
Fixes #1657.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Keep the ifname and bridge state backup variables in /etc/config/luci to not
pollute /etc/config/network.
Fixes #1655.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
OpenWrt/LEDE introduced the "local-address" field a while back to expose the
effective local host address of the delegated prefix, so use that information
instead of assuming `[prefix]:1`.
Fixes #1484.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
The _wifi_sid_by_ifname() function depends on _wifi_state_by_ifname()
so reorder the private helper functions accordingly to avoid nil value
call attempts.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
- fix mapping of ubus wireless state to uci declared vifs
- fix leaking foreign vif info into per-phy iwinfo stats
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Remove the code related to the deprecated madwifi driver.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
The Overview page and Network>Interfaces page currently do not give much information about IPv6, particularly with Prefix Delegated setups. In these setups, ISP will delegate a prefix to the router. Currently LuCI doesn't display this Prefix Delegation from the ISP anywhere. A number of changes was added to this commit:
1) self:_ubus("ipv6-prefix") was extracted and put into protocol.ip6prefix.
2) Network>Interfaces page, if a .ip6prefix is present, show it under Status. (IPv6-PD).
3) On the Overview page, "Type" and "Prefix Delegated" has been added to the IPv6 Network Overview Status:
- Type will display the .proto, similar to the IPv4 case. If a .ip6prefix is present, it'll display a "-pd" at the end of the Type: i.e. dhcpv6-pd vs. dhcpv6.
- If no .ip6prefix is present, it'll do what it does currently, and just show Address, or :: if no address is present.
- If .ip6prefix is present, it'll show the "Prefix Delegated", it'll also hide "Address" if no address is present, else it'll show ifc6.ip6addr as well.
Signed-off-by: Cody R. Brown <dev@codybrown.ca>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Wireless monitor interfaces usually have no SSID set in their config and
various network model utility functions did not handle this case properly,
mainly while trying to incorperate the SSID string into various description
labels.
Fall back to the internal network id (radioX.networkY) in cases where neither
the SSID nor the BSSID are available.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Fix the underlying _iface_ignore() function to not ignore virtual interfaces,
in order to let ignore_interface() return true for PPP and similar devices.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Fix display of WAN status when WAN is provided by using WWAN device or similar with other similar similar methods.
Explanation:
Before this, protocol was fetched from /etc/config/network for interface which often is wan_4 - but protocol is configured in file as wan, and therefore protocol is always none, since configuration is made for wan and then setup as wan_4 and possibly wan_6 if ipv6 is being used. This commit uses ubus to get used active protocol. For example, in case of qmi, it displays protocol as dhcp since even if I configured wan to use qmi, dhcp was used as a protocol for getting IP address.
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Also implement :ipaddrs() and :ip6addrs() helper for network instances.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Mode of an active network on the same radio.
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Replaces the ubus calls in luci.model.network with the common api
from luci.util.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
* Rename subdirectories to their repective OpenWrt package names
* Make each LuCI module its own standalone package
* Deploy a shared luci.mk which is used by each module Makefile
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
