| Age | Commit message (Collapse) | Author |
|---|
|
Some graph definitions rely on data not supported across all APC UPSes.
Due to recent upstream changes in collectd, the daemon no longer creates
a NaN-filled .rrd file corresponding to any missing UPS data. Depending
on the connected UPS, this may result in some "broken" graphs on the Luci
Statistics page since rrdtool cannot find the expected .rrd file.
Include the add_supported() function to determine the UPS data available
at runtime and update any definitions of graphs to include only supported
data. For example, the whole chart stack of AC input and output voltages
will normally be "broken" if the UPS only measures AC input voltage. With
these changes, the output voltage graph definition is stripped out,
allowing the chart to render.
Make consistent use of data types and instances in graph definitions. All
definitions now use the same format with the 'instances' key. Unnecessary
'types' and 'sources' keys are removed.
Fix the definition of 'line frequency' graph, based on upstream collectd
apcups plugin code: type is 'frequency' but instance should be 'input'.
This also includes some code and whitespace cleanup.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
|
|
The Voltage graph combines Battery, Input Voltage and Output Voltage.
The Y-Axis scale masks changes in Input/Output voltages over time.
This patch splits the graphs into 2 graphs.
This makes it possible to see variations in AC Input/Output voltages.
Signed-off-by: Bob Meizlik <bobmseagithub@squakmt.com>
|
|
OpenWRT/LEDE support for APC UPSes is only partial: although the collectd
apcups plugin is included, related lua/luci code is missing. These changes
add the lua side and have been used for ~2 years, both on OpenWRT and LEDE.
Reworked from patches submitted by James Klaas to the luci development list
in 2015.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
|
|
This allows a graph definition to explicitely request LINE1, LINE2 or
LINE3 for a data source.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
Properly render menu items for plugin instances that do not have a
corresponding label defined.
This allows for registering new graph pages solely by dropping files
into /usr/lib/lua/luci/statistics/rrdtool/definitions/
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
A missing or faulty luci_statistics config file may prevent
LuCI access completely already at the login phase as
the statistics config is parsed already then.
The error is like:
.../statistics/datatree.lua:16: attempt to index upvalue 'sections' (a nil value)
User may be completely locked out of LuCI until he figures out
the need to have a proper luci_statistics config file.
Prevent the error by checking for the existence of
the uci config sections before trying to use values from them.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Fix graph visibility on processes page based on plugin
instance. The overview instance is empty, while monitored
processes have their own instances.
Original version of the patch created by @koblack and
discussed in #1021
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Enhance processes statistics page:
* add proper labels to graphs
* correct RSS memory stats title, add VSZ stats
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Signed-off-by: Marc Benoit marcb6218@gmail.com
|
|
The statistics graphs on the pages with multiple data sources
have contained links to the data sources, but those links
have not worked. Remove the links as they are unnecessary.
This commit fixes #1006
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Add advice about the permissions needed for the data directory:
Pages are rendered as user 'nobody', so the *.rrd files,
data directory and all its parent directories need to be
world readable.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
The df plugin wasn't displaying useful lables for the space
used vs free vs reserved due to title override. This patch
fixes that issues by removing the per-instance setting.
Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
|
|
Add support for temperature data from collect-mod-thermal
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
The original data model definition assumed data from a quad-core CPU,
which caused errors with single- and dual-core processors.
Adjust the data model to work with also them.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Adjust number formatting to display >1GHz values better.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Add support for 'cpufreq' plugin in collectd, which monitors
the CPU cores' frequencies. Some platforms enable dynamic
frequency scaling according to CPU load.
'cpufreq' plugin can currently be built for x86 and mvebu.
(and it should likely be enabled also for ipq806x)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
luci-app-statistics: nut: Add additional stats some UPSes report
|
|
Different UPSes report differents stats; here we add graphing
of some additional statistics supports by some models.
Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
|
|
It used data source instance name instead of plugin instance name.
Signed-off-by: Artur Stepniewski <artur.stepniewski+openwrt@gmail.com>
|
|
Introduce option that enables the user to select max values
instead of averages for graphs if the user has disabled RRAsingle.
The option defaults to average values, which have been the default
in Luci statistics.
Remove 'optional' from RRASingle, as it is a key option for statistics.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
With rrdsingle the average values are used for graphing. As the
timescale increases (say over a day or month) the average values
progressively reduce. Using the maximum value over the longer periods
is arguably no less deceptive but it does produce more informative
graphs.
V2 - Invert the default path logic related to rra.single
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
|
|
Disk usage graphing was broken. This fixes it.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
|
|
Remove the usually empty standard deviation graph from the ping page.
The graph is empty for most users as collectd measures standard deviation
of individual pings inside the general interval of statistics collection.
Default setting for both ping interval and general collection interval
is 30s in Luci statistics, meaning just 1 ping per interval, which
leads to empty graph.
(To provide relveant data, the ping interval should be 1/4-1/5 of the
general collection interval. Even then the graph does not look very
informative due to different scaling than the latency graph.)
Note that this commit does not change collectd itself, which continues
to collect and calculate also the std.dev. data, which can be fetched
with 'rrdtool' if needed.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Some applications only support ipv4 so add ipv4only option
to host and hostport datatypes so that for thos applications
that when an IP address is specified only and ipv4 ip address
gets accepted.
|
|
Ping statistics plugin allows the user to define multiple ping targets.
The graphs have so far shown multiple hosts in a stacked way.
Adjust graphs to show the target hosts separately (overlay=true).
Clarify the plugin definition with some additional line spacing.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Improve scaling of the associated stations graph on the wireless page.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
This aligns the order and grouping of RX and TX network datasources.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
This changeset covers compression and traffic stats, not every combination has
been tested yet.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Due to a lack of a test environment this support only covers thermal graphs
so far. Please send the output of "rrdtool info /tmp/rrd/*/sensors-*/*.rrd"
if your system happens to support voltage, power or fanspeed sensors.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Remove leftover unused translation code and properly escape colons in line
labels.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
If a plugin produces only one instance, e.g. netlink with just one interface
configured, then the controller will register no detail views which would
normally show all graphs but the index pacage of a given plugin will still
display the collapsed view without any possibility to reach the full listing.
Fix the problem by only rendering a linked index view when more than one
instance is present.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Reorganise the menu items of the Luci statistics module:
* Re-label "Collectd" to "Setup" and place it after the "Graphs" items.
- "Graphs" is used much more frequently so it should be first.
- Change "Collectd" menu item to "Setup" to clarify things.
* Re-label "System plugins" to "General plugins" to change sorting.
"Network / Output / System" changes to "General / Network / Output"
that is more logical order for the items.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
At some point since I last checked, the nut plugin for collectd changed the
names of the timeleft and percent datasets. Update the luci module to match
so that those graphs are generated correctly again.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
sed -i "s/collected date/collected data/"
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Clarify the CPU time consumption graph by removing the "idle" data from it.
Especially with light traffic, removing "idle" enables the graph
to scale better and to properly show the CPU load variations.
If "idle" data needs to be seen, it might be added as a second graph below.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
* Clarify the short explanation on the statistics section's front page.
* Mention the possibility of additional collectd plugins to get more stats.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Move the file entropy.lua to the correct directory.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Add statistics on the available entropy.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
statistics: cpu graph - add label definitions, add softirq and interrupt stats
|
|
Utilise alt_autoscale_max to make the memory chart y-axis to scale better
for devices with e.g. 128 MB RAM.
Also fix the axis min value to 0.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Implement support for alternative scaling of the y-axis.
By default, rrdtool will autoscale to 1,2,5,10,20,50,100,200,... etc.,
which is not always suitable (e.g. memory charts for device with 128 MB).
Rrdtool 1.0.50 already supports alternative autoscaling that creates
a tighter y-axis. Implement graph-level options in Luci statistics to
support those boolean options as "alt_autoscale" and "alt_autoscale_max".
info at http://oss.oetiker.ch/rrdtool/doc/rrdgraph.en.html
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
CPU plugin in the Luci statistics was missing the label definitions,
so the field labels are like "cpu_system" instead of "System".
Add proper label definitions to CPU (like the other plugins already have).
The statistics graph was also missing softirq and interrupt stats, although colors
for them were defined. Softirq consumes massive amount of CPU especially with
any qos in use, so it is important for the user to see also that data. Add both
softirq and interrupt stats to the graph.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Earlier update to collectd 5.4.1 changed the field from "ping" to "value",
which was changed in the graph definition here, but the label definition
was forgotten. Field's label now reads "ping_IPaddr_value".
Correct the label definition to show only IPaddr like the other two graphs.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Collectd 5.5.0 introduced new data to conntrack plugin:
In addition to the number of tracked connections there is also
the static max conntrack value and the calculated use percentage.
Luci's conntrack plugin intrepretes "conntrack-max" as a new data instance
and includes it in the graph in addition to the real "conntrack" number.
Eliminate "max" from graph by specifying empty "" instance as data source.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Fix log spam that uhttpd logging change has brought to surface.
Sun Mar 1 11:10:42 2015 daemon.err uhttpd[2293]: /usr/lib/lua/luci/dispatcher.lua:433: Failed to execute call dispatcher target for entry '/admin/statistics/graph/conntrack'.
Sun Mar 1 11:10:42 2015 daemon.err uhttpd[2293]: The called action terminated with an exception:
Sun Mar 1 11:10:42 2015 daemon.err uhttpd[2293]: .../luci/controller/luci_statistics/luci_statistics.lua:153: attempt to use a closed file
Closing the png file explicitly on line 153 is unnecessary, as
ltn12's source.file method already closes the file after use.
https://github.com/openwrt/luci/blob/master/modules/luci-base/luasrc/ltn12.lua#L119
More info at https://dev.openwrt.org/ticket/19083#comment:2
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
|
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
|
