summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2016-11-08luci-app-statistics: add support for CPU frequency scaling statsHannu Nyman
Add support for 'cpufreq' plugin in collectd, which monitors the CPU cores' frequencies. Some platforms enable dynamic frequency scaling according to CPU load. 'cpufreq' plugin can currently be built for x86 and mvebu. (and it should likely be enabled also for ipq806x) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-11-08time zone data: Update to 2016iHannu Nyman
Note that several of the time zones now use a numeric name that is quoted with < > (e.g. "<+03>-3") musl 1.1.15 and earlier have a bug with < > quoted time zone names. Fix for the bug * has already been patched in musl upstream with http://git.musl-libc.org/cgit/musl/commit/?id=8ca27ac4bfe73bff785d0c26c1de0da92b55e5c6 * has been committed in LEDE with https://github.com/lede-project/source/commit/671cb35880308404a17c430c4b3b13dd506a5671 * has been submitted to Openwrt as pull request https://github.com/openwrt/openwrt/pull/163 Key changes in 2016d-2016i: --------------------------- 2016d: America/Caracas switches from -0430 to -04 on 2016-05-01. Asia/Magadan switches from +10 to +11 on 2016-04-24. New zone Asia/Tomsk, split off from Asia/Novosibirsk. 2016f: Asia/Novosibirsk switches from +06 to +07 on 2016-07-24. Asia/Novokuznetsk and Asia/Novosibirsk now use numeric time zone abbreviations instead of invented ones. 2016g: Turkey switched from EET/EEST (+02/+03) to permanent +03, effective 2016-09-07. Use "+03" rather than an invented abbreviation for the new time. Several zones in Antarctica and the former Soviet Union, along with zones intended for ships at sea that cannot use POSIX TZ strings, now use numeric time zone abbreviations instead of invented or obsolete alphanumeric abbreviations. 2016h: Asia/Gaza and Asia/Hebron end DST on 2016-10-29, not 2016-10-21. Predict that future fall transitions will be on the last Saturday of October. Asia/Colombo now uses numeric time zone abbreviations like "+0530" instead of alphabetic ones like "IST" and "LKT". 2016i: Pacific/Tongatapu begins DST on 2016-11-06, ending on 2017-01-15. Assume future observances in Tonga will be from the first Sunday in November through the third Sunday in January, like Fiji. Switch to numeric time zone abbreviations for this zone. Northern Cyprus is now +03 year round, causing a split in Cyprus time zones starting 2016-10-30 at 04:00. This creates a zone Asia/Famagusta. Antarctica/Casey switched from +08 to +11 on 2016-10-22. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-11-01luci.mk: add simple cache busterJo-Philipp Wich
Append a ?v=version string to any media or resource URL that has a .js or .css extension. Also substitute placeholders in the form <%# xxxPKG_VERSION %> where xxx is replaced verbatim and PKG_VERSION with the actual version, e.g. <%# ?x=PKG_VERSION %> will result in "?x=git-16.237.30043-f885853". Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-30documentation: Update i18n adviceHannu Nyman
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-10-30i18n: sync translationsHannu Nyman
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-10-30luci-app-travelmate: user interface for Travelmate packageHannu Nyman
Create user interface for Travelmate, a new package that helps in creating travel router functionality. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-10-28Merge pull request #793 from remakeelectric/rme-master-tweaksJo-Philipp Wich
wifi_add minor usability tweaks
2016-10-24Merge pull request #776 from cshore/pull-request-statistics-nutJo-Philipp Wich
luci-app-statistics: nut: Add additional stats some UPSes report
2016-10-23i18n: sync translationsHannu Nyman
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-10-23Merge pull request #831 from danrl/patch-1Hannu Nyman
Typo
2016-10-21TypoDan Lüdtke
2016-10-14Merge pull request #682 from cshore/pull-request-pppoe-serverHannu Nyman
luci-app-pppoe-server: Add PPPoE server configuration
2016-10-10Merge pull request #822 from NeoRaider/staging-dir-hostHannu Nyman
luci-base: use default install paths for host utils (again)
2016-10-09luci-base: use default install paths for host utilsMatthias Schiffer
This reverts commit d4c33720208346ee7983213fe764df3102b8a771. PATH inconsistencies and Host/Install arguments have been fixed in both LEDE and OpenWrt, so we can revert the revert. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-06luci-base: remove default diag host from /etc/config/luciJo-Philipp Wich
Now that luci-mod-admin-full figures out the proper diagnostics host during postinstall we can remove the UCI section from the default configuration file. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-06luci-mod-admin-full: figure out diagnostics host in postinstallJo-Philipp Wich
Attempt to infer the default diagnostics host for nslookup / ping / traceroute from the various URLs in /etc/os-release. Fall back to "openwrt.org" if no host is found to preserve backwards compatibility. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-05Revert "luci-base: use default install paths for host utils"Jo-Philipp Wich
This reverts commit 87a7570690f7aeffb1aff01f320973c9acb668d3. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-05Revert "luci-base: fix luci-base host tool install on OpenWrt"Jo-Philipp Wich
This reverts commit f7639bcd6a2caf7cc0f03e85744906c577eefeab. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-04Merge pull request #813 from NeoRaider/staging-dir-hostHannu Nyman
luci-base: fix luci-base host tool install on OpenWrt
2016-10-04luci-base: fix luci-base host tool install on OpenWrtMatthias Schiffer
OpenWrt doesn't provide an argument to Host/Install like LEDE does; use HOST_BUILD_PREFIX instead, which is available on both. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-03Merge pull request #807 from hnyman/ssl-opensslHannu Nyman
luci-ssl-openssl: Provide OpenSSL-based LuCI collection
2016-10-03luci-ssl-openssl: Provide OpenSSL-based LuCI collectionHannu Nyman
Add a new OpenSSL-based collection that uses libustream-openssl instead of the default libustream-polarssl. (Note: px5g still needs libpolarssl, so both libs will be included) Mention PolarSSL in the title of luci-ssl. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-10-03luci-base: use default install paths for host utilsMatthias Schiffer
Also, don't make any assumptions about the staging dir lua and LuaSrcDiet were installed to. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-30i18n: sync translationsHannu Nyman
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-09-29Merge pull request #770 from arturdm/patch-1Hannu Nyman
luci-app-statistics: Fix missing title in df graphs
2016-09-27Merge pull request #805 from chris5560/masterChristian Schoenebeck
luci-app-ddns: no longer check for name lookup progs to support force ip version
2016-09-25luci-app-ddns: correct required ddns-script versionChristian Schoenebeck
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
2016-09-25luci-app-ddns: ignore if name lookup progs not supporting force ip versionChristian Schoenebeck
- no longer verify installed name lookup programs to set has_forceip flag inside tools/ddns.lua - adapt messages inside hints.lua Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
2016-09-23wifi_add: allow multi SSID by default if supported.Karl Palsson
Instead of defaulting to replace, even on hardware that supports multi SSID, make the default to add. This reduces the chance of locking oneself out when adding a second network. If you intended to replace, ending up with two networks then deleting one is easier than recovering when the old network configuration is gone. Signed-off-by: Karl Palsson <karlp@etactica.com>
2016-09-23wifi_add: help text should match realityKarl Palsson
An additonal network is created if the box _is_ checked.
2016-09-23wifi_add: show the SSID of the network being joined.Karl Palsson
After clicking the "join" button on the scan list, the SSID is no longer visible, though it's kept in the form to pass to the server. Show the chosen SSID on the top of the page, to help people confirm that they're joining the right network. Signed-off-by: Karl Palsson <karlp@etactica.com>
2016-09-22freifunk-p2pblock / luci-app-p2pblock: mark BROKENHannu Nyman
Mark freifunk-p2pblock and luci-app-p2pblock BROKEN as p2pblock needs layer7 support in iptables, which was removed in early 2015 from iptables-mod-filter: https://dev.openwrt.org/changeset/45423 https://dev.openwrt.org/changeset/45424 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-09-20Merge pull request #800 from kuoruan/aria2Hannu Nyman
luci-app-aria2: fix template name
2016-09-20luci-app-aria2: fix template nameHsing-Wang Liao
Signed-off-by: Hsing-Wang Liao <kuoruan@gmail.com>
2016-09-19Merge pull request #799 from kuoruan/aria2Hannu Nyman
luci-app-aria2: fix and update
2016-09-19luci-app-aria2: fix bugs and add log optionHsing-Wang Liao
* Fix unable save authentication method; * Use luci.dispatcher.build_url(...) to support Chaos Calmer; * Add log file and log level options; * Rename files. Signed-off-by: Hsing-Wang Liao <kuoruan@gmail.com>
2016-09-19luci-app-aria2: add maintainer infoHsing-Wang Liao
Signed-off-by: Hsing-Wang Liao <kuoruan@gmail.com>
2016-09-07Merge pull request #794 from remakeelectric/wiki-linksJo-Philipp Wich
docs: link to the developer wiki documentation
2016-09-07docs: link to the developer wiki documentationKarl Palsson
Signed-off-by: Karl Palsson <karlp@etactica.com>
2016-09-04luci-app-statistics: Add cpu and memory plugins to the default setHannu Nyman
Add cpu and memory statistics plugins to the default set included in Luci statistics and enable them in the default config. They are useful small collectd plugins for resource usage monitoring. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-08-25Merge pull request #782 from Ansuel/masterHannu Nyman
Fix some capital and add some translation
2016-08-24luci-app-pbx(-voicemail): mark BROKENHannu Nyman
Mark the luci-app-pbx(-voicemail) packages BROKEN as trying to install them now produces dependency errors. The pbx packages depend on asterisk 1.8 that is EOL upstream and has been moved from the telephony feed to the abandoned feed. If LuCI pbx packages are still needed, they should be refreshed to depend on a current asterisk version from the telephony feed. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-08-24Fix some capital and add some translationBuildTools
Hope this time I have done a good work
2016-08-24i18n: sync translationsHannu Nyman
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-08-24luci-mod-admin-full: tweak checksum item presentationHannu Nyman
Simplify the sysupgrade image checksum strings in order to avoid translating "Checksum xxx" items both for MD5 and SHA256. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-08-24Revert "Fix and update italian translation"Jo-Philipp Wich
This reverts commit 66d5023891ee948480042e7e0af81b5fc3e3b53e since the original change was apparently untested. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-23Merge pull request #781 from Ansuel/patch-1Jo-Philipp Wich
Fix and update italian translation
2016-08-23Fix and update italian translationAnsuel
I have fixed some capital letter and add some translation
2016-08-19luci-mod-admin-full: show also sha256 checksum for sysupgrade imagesHannu Nyman
Show also the sha256 checksum in addition to MD5 checksum to enable image verification also for builds with only sha256 checksums. If the 'sha256sum' command is not present in the system, the value remains empty. Note: The easiest way to get the 'sha256sum' command is to compile it into busybox. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-08-18luci-mod-admin-full: properly skip over unused switch portsJo-Philipp Wich
Fix incomplete port status display on vlan setup page when ports in the middle are not used, e.g. some Lantiq boards use ports 0, 1, 2 and 4 for LAN ports so JS code should not attempt to reference an undefined status element for port 3. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 01:40:52 +0000