diff options
Diffstat (limited to 'protocols/luci-proto-ipv6/luasrc')
| -rw-r--r-- | protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_aiccu.lua | 136 | ||||
| -rw-r--r-- | protocols/luci-proto-ipv6/luasrc/model/network/proto_aiccu.lua | 49 |
2 files changed, 185 insertions, 0 deletions
diff --git a/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_aiccu.lua b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_aiccu.lua new file mode 100644 index 0000000000..e3ae020f58 --- /dev/null +++ b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_aiccu.lua @@ -0,0 +1,136 @@ +-- Copyright 2015 Paul Oranje <por@xs4all.nl> +-- Licensed to the public under the Apache License 2.0. + +local map, section, net = ... + +-- config read by /lib/netifd/proto/aiccu.sh +local username, password, protocol, server, tunnelid, ip6prefix, requiretls, nat, heartbeat, + verbose, ntpsynctimeout, ip6addr, sourcerouting, defaultroute + +-- generic parameters +local metric, ttl, mtu + + +username = section:taboption("general", Value, "username", + translate("Server username"), + translate("SIXXS-handle[/Tunnel-ID]")) +username.datatype = "string" + +password = section:taboption("general", Value, "password", + translate("Server password"), + translate("Server password, enter the specific password of the tunnel when the username contains the tunnel ID")) +password.datatype = "string" +password.password = true + + +--[[ SIXXS supports only TIC as tunnel broker protocol, no use setting it. +protocol = section:taboption("general", ListValue, "protocol", + translate("Tunnel broker protocol"), + translate("SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) use 6in4 instead")) + +protocol:value("tic", "TIC") +protocol:value("tsp", "TSP") +protocol:value("l2tp", "L2TP") +protocol.default = "tic" +protocol.optional = true +--]] + + +server = section:taboption("general", Value, "server", + translate("Tunnel setup server"), + translate("Optional, specify to override default server (tic.sixxs.net)")) +server.datatype = "host" +server.optional = true + + +tunnelid = section:taboption("general", Value, "tunnelid", + translate("Tunnel ID"), + translate("Optional, use when the SIXXS account has more than one tunnel")) +tunnelid.datatype = "string" +tunnelid.optional = true + + +local ip6prefix = section:taboption("general", Value, "ip6prefix", + translate("IPv6 prefix"), + translate("Routed IPv6 prefix for downstream interfaces")) +ip6prefix.datatype = "ip6addr" +ip6prefix.optional = true + + +heartbeat = s:taboption("general", ListValue, "heartbeat", + translate("Tunnel type"), + translate("Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison\">Tunneling Comparison</a> on SIXXS")) +heartbeat:value("0", translate("AYIYA")) +heartbeat:value("1", translate("Heartbeat")) +heartbeat.default = "0" + + +nat = section:taboption("general", Flag, "nat", + translate("Behind NAT"), + translate("The tunnel end-point is behind NAT, defaults to disabled and only applies to AYIYA")) +nat.optional = true +nat.default = disabled + + +requiretls = section:taboption("general", Flag, "requiretls", + translate("Require TLS"), + translate("Connection to server fails when TLS cannot be used")) +requiretls.optional = true +requiretls.default = requiretls.enabled + + +verbose = section:taboption("advanced", Flag, "verbose", + translate("Verbose"), + translate("Verbose logging by aiccu daemon")) +verbose.optional = true +verbose.default = disabled + + +ntpsynctimeout = section:taboption("advanced", Value, "ntpsynctimeout", + translate("NTP sync time-out"), + translate("Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)")) +ntpsynctimeout.datatype = "uinteger" +ntpsynctimeout.placeholder = "90" +ntpsynctimeout.optional = true + + +ip6addr = section:taboption("advanced", Value, "ip6addr", + translate("Local IPv6 address"), + translate("IPv6 address delegated to the local tunnel endpoint (optional)")) +ip6addr.datatype = "ip6addr" +ip6addr.optional = true + + +defaultroute = section:taboption("advanced", Flag, "defaultroute", + translate("Default route"), + translate("Whether to create an IPv6 default route over the tunnel")) +defaultroute.default = defaultroute.enabled +defaultroute.optional = true + + +sourcerouting = section:taboption("advanced", Flag, "sourcerouting", + translate("Source routing"), + translate("Whether to route only packets from delegated prefixes")) +sourcerouting.default = sourcerouting.enabled +sourcerouting.optional = true + + +metric = section:taboption("advanced", Value, "metric", + translate("Use gateway metric")) +metric.datatype = "uinteger" +metric.placeholder = "0" +metric:depends("defaultroute", defaultroute.enabled) + + +ttl = section:taboption("advanced", Value, "ttl", + translate("Use TTL on tunnel interface")) +ttl.datatype = "range(1,255)" +ttl.placeholder = "64" + + +mtu = section:taboption("advanced", Value, "mtu", + translate("Use MTU on tunnel interface"), + translate("minimum 1280, maximum 1480")) +mtu.datatype = "range(1280,1480)" +mtu.placeholder = "1280" + diff --git a/protocols/luci-proto-ipv6/luasrc/model/network/proto_aiccu.lua b/protocols/luci-proto-ipv6/luasrc/model/network/proto_aiccu.lua new file mode 100644 index 0000000000..5896a278ce --- /dev/null +++ b/protocols/luci-proto-ipv6/luasrc/model/network/proto_aiccu.lua @@ -0,0 +1,49 @@ +-- Copyright 2015 Paul Oranje <por@xs4all.nl> +-- Licensed to the public under GPLv2 + +local netmod = luci.model.network +local interface = luci.model.network.interface + +local proto = netmod:register_protocol("aiccu") + +function proto.get_i18n(self) + return luci.i18n.translate("AICCU (SIXXS)") +end + +function proto.ifname(self) + return "aiccu-" .. self.sid +end + +function proto.get_interface(self) + return interface(self:ifname(), self) +end + +function proto.is_installed(self) + return nixio.fs.access("/lib/netifd/proto/aiccu.sh") +end + +function proto.opkg_package(self) + return "aiccu" +end + +function proto.is_floating(self) + return true +end + +function proto.is_virtual(self) + return true +end + +function proto.get_interfaces(self) + return nil +end + +function proto.contains_interface(self, ifname) + if self:is_floating() then + return (netmod:ifnameof(ifc) == self:ifname()) + else + return netmod.protocol.contains_interface(self, ifc) + end +end + +netmod:register_pattern_virtual("^aiccu-%%w") |