summaryrefslogtreecommitdiffhomepage
path: root/po
diff options
context:
space:
mode:
Diffstat (limited to 'po')
-rw-r--r--po/ca/olsr.po54
-rw-r--r--po/de/olsr.po73
-rw-r--r--po/el/olsr.po54
-rw-r--r--po/en/olsr.po54
-rw-r--r--po/es/olsr.po54
-rw-r--r--po/fr/olsr.po54
-rw-r--r--po/it/olsr.po54
-rw-r--r--po/ja/olsr.po54
-rw-r--r--po/pt/olsr.po54
-rw-r--r--po/pt_BR/olsr.po54
-rw-r--r--po/ru/olsr.po54
-rw-r--r--po/templates/olsr.pot54
-rw-r--r--po/vi/olsr.po54
13 files changed, 655 insertions, 66 deletions
diff --git a/po/ca/olsr.po b/po/ca/olsr.po
index 9a4b7a84a0..d09eeb9b34 100644
--- a/po/ca/olsr.po
+++ b/po/ca/olsr.po
@@ -26,6 +26,15 @@ msgstr "Anuncis de xarxa de màquines actives"
msgid "Advanced Settings"
msgstr ""
+msgid "Allow gateways with NAT"
+msgstr ""
+
+msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgstr ""
+
+msgid "Announce uplink"
+msgstr ""
+
msgid "Announced network"
msgstr "Xarxa anunciada"
@@ -53,6 +62,11 @@ msgstr ""
msgid "Enable"
msgstr ""
+msgid ""
+"Enable SmartGateway. If it is disabled, then all other SmartGateway "
+"parameters are ignored. Default is \"no\"."
+msgstr ""
+
msgid "Enable this interface."
msgstr ""
@@ -167,6 +181,9 @@ msgid ""
"of a not-linklocal interface IP."
msgstr ""
+msgid "IPv6-Prefix of the uplink"
+msgstr ""
+
msgid ""
"If the route to the current gateway is to be changed, the ETX value of this "
"gateway is multiplied with this value before it is compared to the new one. "
@@ -175,6 +192,10 @@ msgid ""
"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
msgstr ""
+msgid ""
+"If this Node uses NAT for connections to the internet. Default is \"yes\"."
+msgstr ""
+
msgid "Interface"
msgstr ""
@@ -398,9 +419,6 @@ msgid ""
"really slow. In this case disable it here."
msgstr ""
-msgid "Routen"
-msgstr ""
-
msgid "Routes"
msgstr ""
@@ -425,6 +443,14 @@ msgstr ""
msgid "Source address"
msgstr ""
+msgid ""
+"Specifies the speed of the uplink in kilobits/s. First parameter is "
+"upstream, second parameter is downstream. Default is \"128 1024\"."
+msgstr ""
+
+msgid "Speed of the uplink"
+msgstr ""
+
msgid "State"
msgstr ""
@@ -470,10 +496,14 @@ msgid ""
"It can have a value between 1 and 65535."
msgstr ""
-msgid "Timing and Validity"
+msgid ""
+"This can be used to signal the external IPv6 prefix of the uplink to the "
+"clients. This might allow a client to change it's local IPv6 address to use "
+"the IPv6 gateway without any kind of address translation. The maximum prefix "
+"length is 64 bits. Default is \"::/0\" (no prefix)."
msgstr ""
-msgid "Topologie"
+msgid "Timing and Validity"
msgstr ""
msgid "Topology"
@@ -490,6 +520,9 @@ msgstr "No s'ha pogut connectar al dimoni OLSR"
msgid "Uplink"
msgstr ""
+msgid "Uplink uses NAT"
+msgstr ""
+
msgid "Use hysteresis"
msgstr "Utilitza histèresi"
@@ -499,6 +532,11 @@ msgstr ""
msgid "WLAN"
msgstr ""
+msgid ""
+"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
+"work, please install it."
+msgstr ""
+
msgid "Weight"
msgstr ""
@@ -512,5 +550,11 @@ msgid ""
"instead."
msgstr ""
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
+"Default setting is \"both\"."
+msgstr ""
+
msgid "Willingness"
msgstr "Voluntat"
diff --git a/po/de/olsr.po b/po/de/olsr.po
index 27575d3f0d..19920e0cb5 100644
--- a/po/de/olsr.po
+++ b/po/de/olsr.po
@@ -3,7 +3,7 @@ msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: \n"
-"PO-Revision-Date: 2011-02-12 14:23+0100\n"
+"PO-Revision-Date: 2011-05-09 00:52+0100\n"
"Last-Translator: Manuel Munz <freifunk@somakoma.de>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
@@ -24,6 +24,15 @@ msgstr "Aktive HNA-Ankündigungen"
msgid "Advanced Settings"
msgstr ""
+msgid "Allow gateways with NAT"
+msgstr "Gateways mit NAT erlauben"
+
+msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgstr "Auswahl von IPv4-Gateways erlauben, die zum Internet hin NAT verwenden"
+
+msgid "Announce uplink"
+msgstr "Uplink ankündigen"
+
msgid "Announced network"
msgstr "Angekündigtes Netzwerk"
@@ -51,6 +60,13 @@ msgstr ""
msgid "Enable"
msgstr ""
+msgid ""
+"Enable SmartGateway. If it is disabled, then all other SmartGateway "
+"parameters are ignored. Default is \"no\"."
+msgstr ""
+"SmartGateway aktivieren. Ist diese Option deaktiviert, dann werden alle "
+"folgenden SmartGateway Einstellungen ignoriert. Der Defaultwert ist \"no\"."
+
msgid "Enable this interface."
msgstr "Dieses Interface benutzen."
@@ -189,6 +205,9 @@ msgstr ""
"angegebenen Prefix liegt. Der Defaultwert ist \"0::/0\", damit wird eine "
"IPv6-Adresse des Interfaces verwendet die nicht linklocal ist."
+msgid "IPv6-Prefix of the uplink"
+msgstr "IPv6-Präfix des Uplinks"
+
msgid ""
"If the route to the current gateway is to be changed, the ETX value of this "
"gateway is multiplied with this value before it is compared to the new one. "
@@ -203,6 +222,12 @@ msgstr ""
"><b>ACHTUNG:</b> Diese Einstellung darf nicht zusammen mit der etx_ffeth "
"Metrik verwendet werden!<br />Der Defaultwert ist \"1.0\"."
+msgid ""
+"If this Node uses NAT for connections to the internet. Default is \"yes\"."
+msgstr ""
+"Benutzt dieser Knoten NAT für die Verbindung zum Internet? Der Defaultwert "
+"ist \"yes\"."
+
msgid "Interface"
msgstr ""
@@ -453,9 +478,6 @@ msgstr ""
"dann werden die OLSR-Statusseiten nur sehr langsam laden. In diesem Fall "
"sollte man diese Option deaktivieren."
-msgid "Routen"
-msgstr ""
-
msgid "Routes"
msgstr "Routen"
@@ -483,6 +505,17 @@ msgstr "SmartGateway ist auf diesem System nicht konfiguriert."
msgid "Source address"
msgstr ""
+msgid ""
+"Specifies the speed of the uplink in kilobits/s. First parameter is "
+"upstream, second parameter is downstream. Default is \"128 1024\"."
+msgstr ""
+"Hiermit kann man die Geschwindigkeit des Uplinks dieses Knotens ankündigen. "
+"Der erste Wert ist die Upload-, der zweite Wert die Downloadgeschwindigkeit. "
+"Der Defaultwert ist \"128 1024\"."
+
+msgid "Speed of the uplink"
+msgstr "Geschwindigkeit des Uplinks"
+
msgid "State"
msgstr ""
@@ -536,10 +569,18 @@ msgstr ""
"Port, den OLSRd benutzt. Dieser sollte in der Regel auf dem Defaultwert 698 "
"bleiben, was dem von IANA zugewiesenen Port für OLSRd entspricht."
-msgid "Timing and Validity"
+msgid ""
+"This can be used to signal the external IPv6 prefix of the uplink to the "
+"clients. This might allow a client to change it's local IPv6 address to use "
+"the IPv6 gateway without any kind of address translation. The maximum prefix "
+"length is 64 bits. Default is \"::/0\" (no prefix)."
msgstr ""
+"Hiermit kann der externe IPv6-Präfix an Clients signalisiert werden. Dadurch "
+"können Clients ihre lokale IP-Adresse ändern, um diesen IPv6-Gateway ohne "
+"Übersetzung der IPv6-Adresse zu benutzen. Die maximale erlaubte Länge des "
+"Präfix ist 64 bit. Der Defaultwert ist \"::/0\" (kein Präfix)."
-msgid "Topologie"
+msgid "Timing and Validity"
msgstr ""
msgid "Topology"
@@ -557,6 +598,9 @@ msgstr "Es konnte keine Verbindung zum OLSR-Daemon hergestellt werden!"
msgid "Uplink"
msgstr ""
+msgid "Uplink uses NAT"
+msgstr "Der Uplink benutzt NAT."
+
msgid "Use hysteresis"
msgstr "Hysterese aktivieren"
@@ -566,6 +610,13 @@ msgstr ""
msgid "WLAN"
msgstr ""
+msgid ""
+"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
+"work, please install it."
+msgstr ""
+"WARNUNG: kmod-ipip ist nicht installiert. Ohne kmod-ipip wird SmartGateway "
+"nicht funktionieren!"
+
msgid "Weight"
msgstr ""
@@ -586,5 +637,15 @@ msgstr ""
"LinkQualityLevel= 0 ist. Für alle anderen Werte von LinkQualityLevel wird "
"stattdessen der ETX-Wert verwendet."
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
+"Default setting is \"both\"."
+msgstr ""
+"Welche Art von Uplink im Mesh angekündigt wird. Ein Uplink wird automatisch "
+"anhand der lokal angekündigten HNA erkannt (0.0.0.0/0, ::ffff:0:0/96 oder "
+"2000::/3). Der Defaultwert ist \"both\" (sowohl IPv4 als auch IPv6 Uplink "
+"ankündigen sofern verfügbar)."
+
msgid "Willingness"
msgstr "Bereitschaft"
diff --git a/po/el/olsr.po b/po/el/olsr.po
index 1f6da597cc..421cef3162 100644
--- a/po/el/olsr.po
+++ b/po/el/olsr.po
@@ -25,6 +25,15 @@ msgstr ""
msgid "Advanced Settings"
msgstr ""
+msgid "Allow gateways with NAT"
+msgstr ""
+
+msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgstr ""
+
+msgid "Announce uplink"
+msgstr ""
+
msgid "Announced network"
msgstr ""
@@ -52,6 +61,11 @@ msgstr ""
msgid "Enable"
msgstr ""
+msgid ""
+"Enable SmartGateway. If it is disabled, then all other SmartGateway "
+"parameters are ignored. Default is \"no\"."
+msgstr ""
+
msgid "Enable this interface."
msgstr ""
@@ -166,6 +180,9 @@ msgid ""
"of a not-linklocal interface IP."
msgstr ""
+msgid "IPv6-Prefix of the uplink"
+msgstr ""
+
msgid ""
"If the route to the current gateway is to be changed, the ETX value of this "
"gateway is multiplied with this value before it is compared to the new one. "
@@ -174,6 +191,10 @@ msgid ""
"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
msgstr ""
+msgid ""
+"If this Node uses NAT for connections to the internet. Default is \"yes\"."
+msgstr ""
+
msgid "Interface"
msgstr ""
@@ -395,9 +416,6 @@ msgid ""
"really slow. In this case disable it here."
msgstr ""
-msgid "Routen"
-msgstr ""
-
msgid "Routes"
msgstr ""
@@ -422,6 +440,14 @@ msgstr ""
msgid "Source address"
msgstr ""
+msgid ""
+"Specifies the speed of the uplink in kilobits/s. First parameter is "
+"upstream, second parameter is downstream. Default is \"128 1024\"."
+msgstr ""
+
+msgid "Speed of the uplink"
+msgstr ""
+
msgid "State"
msgstr ""
@@ -467,10 +493,14 @@ msgid ""
"It can have a value between 1 and 65535."
msgstr ""
-msgid "Timing and Validity"
+msgid ""
+"This can be used to signal the external IPv6 prefix of the uplink to the "
+"clients. This might allow a client to change it's local IPv6 address to use "
+"the IPv6 gateway without any kind of address translation. The maximum prefix "
+"length is 64 bits. Default is \"::/0\" (no prefix)."
msgstr ""
-msgid "Topologie"
+msgid "Timing and Validity"
msgstr ""
msgid "Topology"
@@ -487,6 +517,9 @@ msgstr ""
msgid "Uplink"
msgstr ""
+msgid "Uplink uses NAT"
+msgstr ""
+
msgid "Use hysteresis"
msgstr ""
@@ -496,6 +529,11 @@ msgstr ""
msgid "WLAN"
msgstr ""
+msgid ""
+"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
+"work, please install it."
+msgstr ""
+
msgid "Weight"
msgstr ""
@@ -509,5 +547,11 @@ msgid ""
"instead."
msgstr ""
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
+"Default setting is \"both\"."
+msgstr ""
+
msgid "Willingness"
msgstr ""
diff --git a/po/en/olsr.po b/po/en/olsr.po
index 9d4e9aa1d2..1393764799 100644
--- a/po/en/olsr.po
+++ b/po/en/olsr.po
@@ -25,6 +25,15 @@ msgstr "Active host net announcements"
msgid "Advanced Settings"
msgstr ""
+msgid "Allow gateways with NAT"
+msgstr ""
+
+msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgstr ""
+
+msgid "Announce uplink"
+msgstr ""
+
msgid "Announced network"
msgstr "Announced network"
@@ -52,6 +61,11 @@ msgstr ""
msgid "Enable"
msgstr ""
+msgid ""
+"Enable SmartGateway. If it is disabled, then all other SmartGateway "
+"parameters are ignored. Default is \"no\"."
+msgstr ""
+
msgid "Enable this interface."
msgstr ""
@@ -166,6 +180,9 @@ msgid ""
"of a not-linklocal interface IP."
msgstr ""
+msgid "IPv6-Prefix of the uplink"
+msgstr ""
+
msgid ""
"If the route to the current gateway is to be changed, the ETX value of this "
"gateway is multiplied with this value before it is compared to the new one. "
@@ -174,6 +191,10 @@ msgid ""
"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
msgstr ""
+msgid ""
+"If this Node uses NAT for connections to the internet. Default is \"yes\"."
+msgstr ""
+
msgid "Interface"
msgstr ""
@@ -397,9 +418,6 @@ msgid ""
"really slow. In this case disable it here."
msgstr ""
-msgid "Routen"
-msgstr ""
-
msgid "Routes"
msgstr ""
@@ -424,6 +442,14 @@ msgstr ""
msgid "Source address"
msgstr ""
+msgid ""
+"Specifies the speed of the uplink in kilobits/s. First parameter is "
+"upstream, second parameter is downstream. Default is \"128 1024\"."
+msgstr ""
+
+msgid "Speed of the uplink"
+msgstr ""
+
msgid "State"
msgstr ""
@@ -469,10 +495,14 @@ msgid ""
"It can have a value between 1 and 65535."
msgstr ""
-msgid "Timing and Validity"
+msgid ""
+"This can be used to signal the external IPv6 prefix of the uplink to the "
+"clients. This might allow a client to change it's local IPv6 address to use "
+"the IPv6 gateway without any kind of address translation. The maximum prefix "
+"length is 64 bits. Default is \"::/0\" (no prefix)."
msgstr ""
-msgid "Topologie"
+msgid "Timing and Validity"
msgstr ""
msgid "Topology"
@@ -489,6 +519,9 @@ msgstr "Unable to connect to the OLSR daemon!"
msgid "Uplink"
msgstr ""
+msgid "Uplink uses NAT"
+msgstr ""
+
msgid "Use hysteresis"
msgstr "Use hysteresis"
@@ -498,6 +531,11 @@ msgstr ""
msgid "WLAN"
msgstr ""
+msgid ""
+"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
+"work, please install it."
+msgstr ""
+
msgid "Weight"
msgstr ""
@@ -511,5 +549,11 @@ msgid ""
"instead."
msgstr ""
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
+"Default setting is \"both\"."
+msgstr ""
+
msgid "Willingness"
msgstr "Willingness"
diff --git a/po/es/olsr.po b/po/es/olsr.po
index d896edc5fe..baf787f2e7 100644
--- a/po/es/olsr.po
+++ b/po/es/olsr.po
@@ -24,6 +24,15 @@ msgstr "Anuncios activos del host de red"
msgid "Advanced Settings"
msgstr ""
+msgid "Allow gateways with NAT"
+msgstr ""
+
+msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgstr ""
+
+msgid "Announce uplink"
+msgstr ""
+
msgid "Announced network"
msgstr "Red a anunciar"
@@ -51,6 +60,11 @@ msgstr ""
msgid "Enable"
msgstr ""
+msgid ""
+"Enable SmartGateway. If it is disabled, then all other SmartGateway "
+"parameters are ignored. Default is \"no\"."
+msgstr ""
+
msgid "Enable this interface."
msgstr ""
@@ -165,6 +179,9 @@ msgid ""
"of a not-linklocal interface IP."
msgstr ""
+msgid "IPv6-Prefix of the uplink"
+msgstr ""
+
msgid ""
"If the route to the current gateway is to be changed, the ETX value of this "
"gateway is multiplied with this value before it is compared to the new one. "
@@ -173,6 +190,10 @@ msgid ""
"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
msgstr ""
+msgid ""
+"If this Node uses NAT for connections to the internet. Default is \"yes\"."
+msgstr ""
+
msgid "Interface"
msgstr ""
@@ -397,9 +418,6 @@ msgid ""
"really slow. In this case disable it here."
msgstr ""
-msgid "Routen"
-msgstr ""
-
msgid "Routes"
msgstr ""
@@ -424,6 +442,14 @@ msgstr ""
msgid "Source address"
msgstr ""
+msgid ""
+"Specifies the speed of the uplink in kilobits/s. First parameter is "
+"upstream, second parameter is downstream. Default is \"128 1024\"."
+msgstr ""
+
+msgid "Speed of the uplink"
+msgstr ""
+
msgid "State"
msgstr ""
@@ -469,10 +495,14 @@ msgid ""
"It can have a value between 1 and 65535."
msgstr ""
-msgid "Timing and Validity"
+msgid ""
+"This can be used to signal the external IPv6 prefix of the uplink to the "
+"clients. This might allow a client to change it's local IPv6 address to use "
+"the IPv6 gateway without any kind of address translation. The maximum prefix "
+"length is 64 bits. Default is \"::/0\" (no prefix)."
msgstr ""
-msgid "Topologie"
+msgid "Timing and Validity"
msgstr ""
msgid "Topology"
@@ -489,6 +519,9 @@ msgstr "No es posible conectar con el demonio de OLSR! "
msgid "Uplink"
msgstr ""
+msgid "Uplink uses NAT"
+msgstr ""
+
msgid "Use hysteresis"
msgstr "Uso de histéresis"
@@ -498,6 +531,11 @@ msgstr ""
msgid "WLAN"
msgstr ""
+msgid ""
+"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
+"work, please install it."
+msgstr ""
+
msgid "Weight"
msgstr ""
@@ -511,5 +549,11 @@ msgid ""
"instead."
msgstr ""
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
+"Default setting is \"both\"."
+msgstr ""
+
msgid "Willingness"
msgstr "<abbr title=\"Willingness\">Voluntad</abbr>"
diff --git a/po/fr/olsr.po b/po/fr/olsr.po
index 88d6144529..88d808e7e8 100644
--- a/po/fr/olsr.po
+++ b/po/fr/olsr.po
@@ -25,6 +25,15 @@ msgstr ""
msgid "Advanced Settings"
msgstr ""
+msgid "Allow gateways with NAT"
+msgstr ""
+
+msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgstr ""
+
+msgid "Announce uplink"
+msgstr ""
+
msgid "Announced network"
msgstr ""
@@ -52,6 +61,11 @@ msgstr ""
msgid "Enable"
msgstr ""
+msgid ""
+"Enable SmartGateway. If it is disabled, then all other SmartGateway "
+"parameters are ignored. Default is \"no\"."
+msgstr ""
+
msgid "Enable this interface."
msgstr ""
@@ -166,6 +180,9 @@ msgid ""
"of a not-linklocal interface IP."
msgstr ""
+msgid "IPv6-Prefix of the uplink"
+msgstr ""
+
msgid ""
"If the route to the current gateway is to be changed, the ETX value of this "
"gateway is multiplied with this value before it is compared to the new one. "
@@ -174,6 +191,10 @@ msgid ""
"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
msgstr ""
+msgid ""
+"If this Node uses NAT for connections to the internet. Default is \"yes\"."
+msgstr ""
+
msgid "Interface"
msgstr ""
@@ -395,9 +416,6 @@ msgid ""
"really slow. In this case disable it here."
msgstr ""
-msgid "Routen"
-msgstr ""
-
msgid "Routes"
msgstr ""
@@ -422,6 +440,14 @@ msgstr ""
msgid "Source address"
msgstr ""
+msgid ""
+"Specifies the speed of the uplink in kilobits/s. First parameter is "
+"upstream, second parameter is downstream. Default is \"128 1024\"."
+msgstr ""
+
+msgid "Speed of the uplink"
+msgstr ""
+
msgid "State"
msgstr ""
@@ -467,10 +493,14 @@ msgid ""
"It can have a value between 1 and 65535."
msgstr ""
-msgid "Timing and Validity"
+msgid ""
+"This can be used to signal the external IPv6 prefix of the uplink to the "
+"clients. This might allow a client to change it's local IPv6 address to use "
+"the IPv6 gateway without any kind of address translation. The maximum prefix "
+"length is 64 bits. Default is \"::/0\" (no prefix)."
msgstr ""
-msgid "Topologie"
+msgid "Timing and Validity"
msgstr ""
msgid "Topology"
@@ -487,6 +517,9 @@ msgstr ""
msgid "Uplink"
msgstr ""
+msgid "Uplink uses NAT"
+msgstr ""
+
msgid "Use hysteresis"
msgstr ""
@@ -496,6 +529,11 @@ msgstr ""
msgid "WLAN"
msgstr ""
+msgid ""
+"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
+"work, please install it."
+msgstr ""
+
msgid "Weight"
msgstr ""
@@ -509,5 +547,11 @@ msgid ""
"instead."
msgstr ""
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
+"Default setting is \"both\"."
+msgstr ""
+
msgid "Willingness"
msgstr ""
diff --git a/po/it/olsr.po b/po/it/olsr.po
index 88d6144529..88d808e7e8 100644
--- a/po/it/olsr.po
+++ b/po/it/olsr.po
@@ -25,6 +25,15 @@ msgstr ""
msgid "Advanced Settings"
msgstr ""
+msgid "Allow gateways with NAT"
+msgstr ""
+
+msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgstr ""
+
+msgid "Announce uplink"
+msgstr ""
+
msgid "Announced network"
msgstr ""
@@ -52,6 +61,11 @@ msgstr ""
msgid "Enable"
msgstr ""
+msgid ""
+"Enable SmartGateway. If it is disabled, then all other SmartGateway "
+"parameters are ignored. Default is \"no\"."
+msgstr ""
+
msgid "Enable this interface."
msgstr ""
@@ -166,6 +180,9 @@ msgid ""
"of a not-linklocal interface IP."
msgstr ""
+msgid "IPv6-Prefix of the uplink"
+msgstr ""
+
msgid ""
"If the route to the current gateway is to be changed, the ETX value of this "
"gateway is multiplied with this value before it is compared to the new one. "
@@ -174,6 +191,10 @@ msgid ""
"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
msgstr ""
+msgid ""
+"If this Node uses NAT for connections to the internet. Default is \"yes\"."
+msgstr ""
+
msgid "Interface"
msgstr ""
@@ -395,9 +416,6 @@ msgid ""
"really slow. In this case disable it here."
msgstr ""
-msgid "Routen"
-msgstr ""
-
msgid "Routes"
msgstr ""
@@ -422,6 +440,14 @@ msgstr ""
msgid "Source address"
msgstr ""
+msgid ""
+"Specifies the speed of the uplink in kilobits/s. First parameter is "
+"upstream, second parameter is downstream. Default is \"128 1024\"."
+msgstr ""
+
+msgid "Speed of the uplink"
+msgstr ""
+
msgid "State"
msgstr ""
@@ -467,10 +493,14 @@ msgid ""
"It can have a value between 1 and 65535."
msgstr ""
-msgid "Timing and Validity"
+msgid ""
+"This can be used to signal the external IPv6 prefix of the uplink to the "
+"clients. This might allow a client to change it's local IPv6 address to use "
+"the IPv6 gateway without any kind of address translation. The maximum prefix "
+"length is 64 bits. Default is \"::/0\" (no prefix)."
msgstr ""
-msgid "Topologie"
+msgid "Timing and Validity"
msgstr ""
msgid "Topology"
@@ -487,6 +517,9 @@ msgstr ""
msgid "Uplink"
msgstr ""
+msgid "Uplink uses NAT"
+msgstr ""
+
msgid "Use hysteresis"
msgstr ""
@@ -496,6 +529,11 @@ msgstr ""
msgid "WLAN"
msgstr ""
+msgid ""
+"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
+"work, please install it."
+msgstr ""
+
msgid "Weight"
msgstr ""
@@ -509,5 +547,11 @@ msgid ""
"instead."
msgstr ""
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
+"Default setting is \"both\"."
+msgstr ""
+
msgid "Willingness"
msgstr ""
diff --git a/po/ja/olsr.po b/po/ja/olsr.po
index 88d6144529..88d808e7e8 100644
--- a/po/ja/olsr.po
+++ b/po/ja/olsr.po
@@ -25,6 +25,15 @@ msgstr ""
msgid "Advanced Settings"
msgstr ""
+msgid "Allow gateways with NAT"
+msgstr ""
+
+msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgstr ""
+
+msgid "Announce uplink"
+msgstr ""
+
msgid "Announced network"
msgstr ""
@@ -52,6 +61,11 @@ msgstr ""
msgid "Enable"
msgstr ""
+msgid ""
+"Enable SmartGateway. If it is disabled, then all other SmartGateway "
+"parameters are ignored. Default is \"no\"."
+msgstr ""
+
msgid "Enable this interface."
msgstr ""
@@ -166,6 +180,9 @@ msgid ""
"of a not-linklocal interface IP."
msgstr ""
+msgid "IPv6-Prefix of the uplink"
+msgstr ""
+
msgid ""
"If the route to the current gateway is to be changed, the ETX value of this "
"gateway is multiplied with this value before it is compared to the new one. "
@@ -174,6 +191,10 @@ msgid ""
"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
msgstr ""
+msgid ""
+"If this Node uses NAT for connections to the internet. Default is \"yes\"."
+msgstr ""
+
msgid "Interface"
msgstr ""
@@ -395,9 +416,6 @@ msgid ""
"really slow. In this case disable it here."
msgstr ""
-msgid "Routen"
-msgstr ""
-
msgid "Routes"
msgstr ""
@@ -422,6 +440,14 @@ msgstr ""
msgid "Source address"
msgstr ""
+msgid ""
+"Specifies the speed of the uplink in kilobits/s. First parameter is "
+"upstream, second parameter is downstream. Default is \"128 1024\"."
+msgstr ""
+
+msgid "Speed of the uplink"
+msgstr ""
+
msgid "State"
msgstr ""
@@ -467,10 +493,14 @@ msgid ""
"It can have a value between 1 and 65535."
msgstr ""
-msgid "Timing and Validity"
+msgid ""
+"This can be used to signal the external IPv6 prefix of the uplink to the "
+"clients. This might allow a client to change it's local IPv6 address to use "
+"the IPv6 gateway without any kind of address translation. The maximum prefix "
+"length is 64 bits. Default is \"::/0\" (no prefix)."
msgstr ""
-msgid "Topologie"
+msgid "Timing and Validity"
msgstr ""
msgid "Topology"
@@ -487,6 +517,9 @@ msgstr ""
msgid "Uplink"
msgstr ""
+msgid "Uplink uses NAT"
+msgstr ""
+
msgid "Use hysteresis"
msgstr ""
@@ -496,6 +529,11 @@ msgstr ""
msgid "WLAN"
msgstr ""
+msgid ""
+"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
+"work, please install it."
+msgstr ""
+
msgid "Weight"
msgstr ""
@@ -509,5 +547,11 @@ msgid ""
"instead."
msgstr ""
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
+"Default setting is \"both\"."
+msgstr ""
+
msgid "Willingness"
msgstr ""
diff --git a/po/pt/olsr.po b/po/pt/olsr.po
index 9d9d5d661c..da78b89651 100644
--- a/po/pt/olsr.po
+++ b/po/pt/olsr.po
@@ -26,6 +26,15 @@ msgstr "Anuncios activos de hosts"
msgid "Advanced Settings"
msgstr ""
+msgid "Allow gateways with NAT"
+msgstr ""
+
+msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgstr ""
+
+msgid "Announce uplink"
+msgstr ""
+
msgid "Announced network"
msgstr "Rede anunciada"
@@ -53,6 +62,11 @@ msgstr ""
msgid "Enable"
msgstr ""
+msgid ""
+"Enable SmartGateway. If it is disabled, then all other SmartGateway "
+"parameters are ignored. Default is \"no\"."
+msgstr ""
+
msgid "Enable this interface."
msgstr ""
@@ -167,6 +181,9 @@ msgid ""
"of a not-linklocal interface IP."
msgstr ""
+msgid "IPv6-Prefix of the uplink"
+msgstr ""
+
msgid ""
"If the route to the current gateway is to be changed, the ETX value of this "
"gateway is multiplied with this value before it is compared to the new one. "
@@ -175,6 +192,10 @@ msgid ""
"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
msgstr ""
+msgid ""
+"If this Node uses NAT for connections to the internet. Default is \"yes\"."
+msgstr ""
+
msgid "Interface"
msgstr ""
@@ -401,9 +422,6 @@ msgid ""
"really slow. In this case disable it here."
msgstr ""
-msgid "Routen"
-msgstr ""
-
msgid "Routes"
msgstr ""
@@ -428,6 +446,14 @@ msgstr ""
msgid "Source address"
msgstr ""
+msgid ""
+"Specifies the speed of the uplink in kilobits/s. First parameter is "
+"upstream, second parameter is downstream. Default is \"128 1024\"."
+msgstr ""
+
+msgid "Speed of the uplink"
+msgstr ""
+
msgid "State"
msgstr ""
@@ -473,10 +499,14 @@ msgid ""
"It can have a value between 1 and 65535."
msgstr ""
-msgid "Timing and Validity"
+msgid ""
+"This can be used to signal the external IPv6 prefix of the uplink to the "
+"clients. This might allow a client to change it's local IPv6 address to use "
+"the IPv6 gateway without any kind of address translation. The maximum prefix "
+"length is 64 bits. Default is \"::/0\" (no prefix)."
msgstr ""
-msgid "Topologie"
+msgid "Timing and Validity"
msgstr ""
msgid "Topology"
@@ -493,6 +523,9 @@ msgstr "Não foi possivel ligar ao servidor OLSR!"
msgid "Uplink"
msgstr ""
+msgid "Uplink uses NAT"
+msgstr ""
+
msgid "Use hysteresis"
msgstr "Usar histerese"
@@ -502,6 +535,11 @@ msgstr ""
msgid "WLAN"
msgstr ""
+msgid ""
+"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
+"work, please install it."
+msgstr ""
+
msgid "Weight"
msgstr ""
@@ -515,5 +553,11 @@ msgid ""
"instead."
msgstr ""
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
+"Default setting is \"both\"."
+msgstr ""
+
msgid "Willingness"
msgstr "Disponibilidade"
diff --git a/po/pt_BR/olsr.po b/po/pt_BR/olsr.po
index 7fb2396da1..a965756750 100644
--- a/po/pt_BR/olsr.po
+++ b/po/pt_BR/olsr.po
@@ -26,6 +26,15 @@ msgstr "Anuncios activos de hosts"
msgid "Advanced Settings"
msgstr ""
+msgid "Allow gateways with NAT"
+msgstr ""
+
+msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgstr ""
+
+msgid "Announce uplink"
+msgstr ""
+
msgid "Announced network"
msgstr "Rede anunciada"
@@ -53,6 +62,11 @@ msgstr ""
msgid "Enable"
msgstr ""
+msgid ""
+"Enable SmartGateway. If it is disabled, then all other SmartGateway "
+"parameters are ignored. Default is \"no\"."
+msgstr ""
+
msgid "Enable this interface."
msgstr ""
@@ -167,6 +181,9 @@ msgid ""
"of a not-linklocal interface IP."
msgstr ""
+msgid "IPv6-Prefix of the uplink"
+msgstr ""
+
msgid ""
"If the route to the current gateway is to be changed, the ETX value of this "
"gateway is multiplied with this value before it is compared to the new one. "
@@ -175,6 +192,10 @@ msgid ""
"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
msgstr ""
+msgid ""
+"If this Node uses NAT for connections to the internet. Default is \"yes\"."
+msgstr ""
+
msgid "Interface"
msgstr ""
@@ -401,9 +422,6 @@ msgid ""
"really slow. In this case disable it here."
msgstr ""
-msgid "Routen"
-msgstr ""
-
msgid "Routes"
msgstr ""
@@ -428,6 +446,14 @@ msgstr ""
msgid "Source address"
msgstr ""
+msgid ""
+"Specifies the speed of the uplink in kilobits/s. First parameter is "
+"upstream, second parameter is downstream. Default is \"128 1024\"."
+msgstr ""
+
+msgid "Speed of the uplink"
+msgstr ""
+
msgid "State"
msgstr ""
@@ -473,10 +499,14 @@ msgid ""
"It can have a value between 1 and 65535."
msgstr ""
-msgid "Timing and Validity"
+msgid ""
+"This can be used to signal the external IPv6 prefix of the uplink to the "
+"clients. This might allow a client to change it's local IPv6 address to use "
+"the IPv6 gateway without any kind of address translation. The maximum prefix "
+"length is 64 bits. Default is \"::/0\" (no prefix)."
msgstr ""
-msgid "Topologie"
+msgid "Timing and Validity"
msgstr ""
msgid "Topology"
@@ -493,6 +523,9 @@ msgstr "Não foi possivel ligar ao servidor OLSR!"
msgid "Uplink"
msgstr ""
+msgid "Uplink uses NAT"
+msgstr ""
+
msgid "Use hysteresis"
msgstr "Usar histerese"
@@ -502,6 +535,11 @@ msgstr ""
msgid "WLAN"
msgstr ""
+msgid ""
+"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
+"work, please install it."
+msgstr ""
+
msgid "Weight"
msgstr ""
@@ -515,5 +553,11 @@ msgid ""
"instead."
msgstr ""
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
+"Default setting is \"both\"."
+msgstr ""
+
msgid "Willingness"
msgstr "Disponibilidade"
diff --git a/po/ru/olsr.po b/po/ru/olsr.po
index 88d6144529..88d808e7e8 100644
--- a/po/ru/olsr.po
+++ b/po/ru/olsr.po
@@ -25,6 +25,15 @@ msgstr ""
msgid "Advanced Settings"
msgstr ""
+msgid "Allow gateways with NAT"
+msgstr ""
+
+msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgstr ""
+
+msgid "Announce uplink"
+msgstr ""
+
msgid "Announced network"
msgstr ""
@@ -52,6 +61,11 @@ msgstr ""
msgid "Enable"
msgstr ""
+msgid ""
+"Enable SmartGateway. If it is disabled, then all other SmartGateway "
+"parameters are ignored. Default is \"no\"."
+msgstr ""
+
msgid "Enable this interface."
msgstr ""
@@ -166,6 +180,9 @@ msgid ""
"of a not-linklocal interface IP."
msgstr ""
+msgid "IPv6-Prefix of the uplink"
+msgstr ""
+
msgid ""
"If the route to the current gateway is to be changed, the ETX value of this "
"gateway is multiplied with this value before it is compared to the new one. "
@@ -174,6 +191,10 @@ msgid ""
"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
msgstr ""
+msgid ""
+"If this Node uses NAT for connections to the internet. Default is \"yes\"."
+msgstr ""
+
msgid "Interface"
msgstr ""
@@ -395,9 +416,6 @@ msgid ""
"really slow. In this case disable it here."
msgstr ""
-msgid "Routen"
-msgstr ""
-
msgid "Routes"
msgstr ""
@@ -422,6 +440,14 @@ msgstr ""
msgid "Source address"
msgstr ""
+msgid ""
+"Specifies the speed of the uplink in kilobits/s. First parameter is "
+"upstream, second parameter is downstream. Default is \"128 1024\"."
+msgstr ""
+
+msgid "Speed of the uplink"
+msgstr ""
+
msgid "State"
msgstr ""
@@ -467,10 +493,14 @@ msgid ""
"It can have a value between 1 and 65535."
msgstr ""
-msgid "Timing and Validity"
+msgid ""
+"This can be used to signal the external IPv6 prefix of the uplink to the "
+"clients. This might allow a client to change it's local IPv6 address to use "
+"the IPv6 gateway without any kind of address translation. The maximum prefix "
+"length is 64 bits. Default is \"::/0\" (no prefix)."
msgstr ""
-msgid "Topologie"
+msgid "Timing and Validity"
msgstr ""
msgid "Topology"
@@ -487,6 +517,9 @@ msgstr ""
msgid "Uplink"
msgstr ""
+msgid "Uplink uses NAT"
+msgstr ""
+
msgid "Use hysteresis"
msgstr ""
@@ -496,6 +529,11 @@ msgstr ""
msgid "WLAN"
msgstr ""
+msgid ""
+"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
+"work, please install it."
+msgstr ""
+
msgid "Weight"
msgstr ""
@@ -509,5 +547,11 @@ msgid ""
"instead."
msgstr ""
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
+"Default setting is \"both\"."
+msgstr ""
+
msgid "Willingness"
msgstr ""
diff --git a/po/templates/olsr.pot b/po/templates/olsr.pot
index f8b7ffe946..941972e8d7 100644
--- a/po/templates/olsr.pot
+++ b/po/templates/olsr.pot
@@ -13,6 +13,15 @@ msgstr ""
msgid "Advanced Settings"
msgstr ""
+msgid "Allow gateways with NAT"
+msgstr ""
+
+msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgstr ""
+
+msgid "Announce uplink"
+msgstr ""
+
msgid "Announced network"
msgstr ""
@@ -40,6 +49,11 @@ msgstr ""
msgid "Enable"
msgstr ""
+msgid ""
+"Enable SmartGateway. If it is disabled, then all other SmartGateway "
+"parameters are ignored. Default is \"no\"."
+msgstr ""
+
msgid "Enable this interface."
msgstr ""
@@ -154,6 +168,9 @@ msgid ""
"of a not-linklocal interface IP."
msgstr ""
+msgid "IPv6-Prefix of the uplink"
+msgstr ""
+
msgid ""
"If the route to the current gateway is to be changed, the ETX value of this "
"gateway is multiplied with this value before it is compared to the new one. "
@@ -162,6 +179,10 @@ msgid ""
"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
msgstr ""
+msgid ""
+"If this Node uses NAT for connections to the internet. Default is \"yes\"."
+msgstr ""
+
msgid "Interface"
msgstr ""
@@ -383,9 +404,6 @@ msgid ""
"really slow. In this case disable it here."
msgstr ""
-msgid "Routen"
-msgstr ""
-
msgid "Routes"
msgstr ""
@@ -410,6 +428,14 @@ msgstr ""
msgid "Source address"
msgstr ""
+msgid ""
+"Specifies the speed of the uplink in kilobits/s. First parameter is "
+"upstream, second parameter is downstream. Default is \"128 1024\"."
+msgstr ""
+
+msgid "Speed of the uplink"
+msgstr ""
+
msgid "State"
msgstr ""
@@ -455,10 +481,14 @@ msgid ""
"It can have a value between 1 and 65535."
msgstr ""
-msgid "Timing and Validity"
+msgid ""
+"This can be used to signal the external IPv6 prefix of the uplink to the "
+"clients. This might allow a client to change it's local IPv6 address to use "
+"the IPv6 gateway without any kind of address translation. The maximum prefix "
+"length is 64 bits. Default is \"::/0\" (no prefix)."
msgstr ""
-msgid "Topologie"
+msgid "Timing and Validity"
msgstr ""
msgid "Topology"
@@ -475,6 +505,9 @@ msgstr ""
msgid "Uplink"
msgstr ""
+msgid "Uplink uses NAT"
+msgstr ""
+
msgid "Use hysteresis"
msgstr ""
@@ -484,6 +517,11 @@ msgstr ""
msgid "WLAN"
msgstr ""
+msgid ""
+"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
+"work, please install it."
+msgstr ""
+
msgid "Weight"
msgstr ""
@@ -497,5 +535,11 @@ msgid ""
"instead."
msgstr ""
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
+"Default setting is \"both\"."
+msgstr ""
+
msgid "Willingness"
msgstr ""
diff --git a/po/vi/olsr.po b/po/vi/olsr.po
index cec7dba017..fe435c1367 100644
--- a/po/vi/olsr.po
+++ b/po/vi/olsr.po
@@ -26,6 +26,15 @@ msgstr "Thông báo của mạng host đang hoạt động"
msgid "Advanced Settings"
msgstr ""
+msgid "Allow gateways with NAT"
+msgstr ""
+
+msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgstr ""
+
+msgid "Announce uplink"
+msgstr ""
+
msgid "Announced network"
msgstr "Mạng lưới thông báo"
@@ -53,6 +62,11 @@ msgstr ""
msgid "Enable"
msgstr ""
+msgid ""
+"Enable SmartGateway. If it is disabled, then all other SmartGateway "
+"parameters are ignored. Default is \"no\"."
+msgstr ""
+
msgid "Enable this interface."
msgstr ""
@@ -167,6 +181,9 @@ msgid ""
"of a not-linklocal interface IP."
msgstr ""
+msgid "IPv6-Prefix of the uplink"
+msgstr ""
+
msgid ""
"If the route to the current gateway is to be changed, the ETX value of this "
"gateway is multiplied with this value before it is compared to the new one. "
@@ -175,6 +192,10 @@ msgid ""
"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
msgstr ""
+msgid ""
+"If this Node uses NAT for connections to the internet. Default is \"yes\"."
+msgstr ""
+
msgid "Interface"
msgstr ""
@@ -399,9 +420,6 @@ msgid ""
"really slow. In this case disable it here."
msgstr ""
-msgid "Routen"
-msgstr ""
-
msgid "Routes"
msgstr ""
@@ -426,6 +444,14 @@ msgstr ""
msgid "Source address"
msgstr ""
+msgid ""
+"Specifies the speed of the uplink in kilobits/s. First parameter is "
+"upstream, second parameter is downstream. Default is \"128 1024\"."
+msgstr ""
+
+msgid "Speed of the uplink"
+msgstr ""
+
msgid "State"
msgstr ""
@@ -471,10 +497,14 @@ msgid ""
"It can have a value between 1 and 65535."
msgstr ""
-msgid "Timing and Validity"
+msgid ""
+"This can be used to signal the external IPv6 prefix of the uplink to the "
+"clients. This might allow a client to change it's local IPv6 address to use "
+"the IPv6 gateway without any kind of address translation. The maximum prefix "
+"length is 64 bits. Default is \"::/0\" (no prefix)."
msgstr ""
-msgid "Topologie"
+msgid "Timing and Validity"
msgstr ""
msgid "Topology"
@@ -491,6 +521,9 @@ msgstr "Không thể kết nối với OLSR daemon!"
msgid "Uplink"
msgstr ""
+msgid "Uplink uses NAT"
+msgstr ""
+
msgid "Use hysteresis"
msgstr "Dùng hysteresis"
@@ -500,6 +533,11 @@ msgstr ""
msgid "WLAN"
msgstr ""
+msgid ""
+"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
+"work, please install it."
+msgstr ""
+
msgid "Weight"
msgstr ""
@@ -513,5 +551,11 @@ msgid ""
"instead."
msgstr ""
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
+"Default setting is \"both\"."
+msgstr ""
+
msgid "Willingness"
msgstr "Sẵn sàng"
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 19:25:15 +0000