diff options
Diffstat (limited to 'contrib/package')
| -rw-r--r-- | contrib/package/remote-update/Makefile | 43 | ||||
| -rwxr-xr-x | contrib/package/remote-update/files/usr/sbin/remote-update | 306 |
2 files changed, 0 insertions, 349 deletions
diff --git a/contrib/package/remote-update/Makefile b/contrib/package/remote-update/Makefile deleted file mode 100644 index 4f8b3a596..000000000 --- a/contrib/package/remote-update/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# -# Copyright (C) 2009 Jo-Philipp Wich <jow@openwrt.org> -# -# This is free software, licensed under the Apache 2.0 license. -# - -include $(TOPDIR)/rules.mk - -PKG_NAME:=remote-update -PKG_RELEASE:=4 - -PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME) - -include $(INCLUDE_DIR)/package.mk - -define Package/remote-update - SECTION:=luci - CATEGORY:=LuCI - SUBMENU:=9. Freifunk - TITLE:=Freifunk remote update utility. - DEPENDS:=@TARGET_atheros||@TARGET_ar71xx||@TARGET_brcm_2_4 -endef - -define Package/remote-update/description - The freifunk remote-update utility uses sysupgrade to reflash the currently - running firmware while keeping most of the existing configuratio. -endef - -define Build/Prepare - mkdir -p $(PKG_BUILD_DIR) -endef - -define Build/Configure -endef - -define Build/Compile -endef - -define Package/remote-update/install - $(CP) ./files/* $(1)/ -endef - -$(eval $(call BuildPackage,remote-update)) diff --git a/contrib/package/remote-update/files/usr/sbin/remote-update b/contrib/package/remote-update/files/usr/sbin/remote-update deleted file mode 100755 index 6e45e482b..000000000 --- a/contrib/package/remote-update/files/usr/sbin/remote-update +++ /dev/null @@ -1,306 +0,0 @@ -#!/bin/sh - -local tempfile=/tmp/remote-upgrade.img -local D2='\([0-9]\{2\}\)' -local D4='\([0-9]\{4\}\)' -local NL=' -' - -find_architecture() -{ - local ifs="$IFS"; IFS="-" - set -- $(opkg list_installed kernel) - IFS="$ifs" - - echo "$3" -} - -find_image() -{ - case "$1" in - atheros) - echo "openwrt-atheros-combined.squashfs.img" - ;; - ar71xx) - echo "openwrt-ar71xx-combined.squashfs.img" - ;; - brcm) - echo "openwrt-brcm-2.4-squashfs.trx" - ;; - esac -} - -check_image() -{ - local file; for file in /lib/upgrade/*.sh; do . $file; done - if platform_check_image "$1" >/dev/null 2>/dev/null; then - return 0 - fi - return 1 -} - -find_remote_checksum() -{ - wget -qO- ${1%/*}/md5sums 2>/dev/null | \ - sed -ne '/'$2'/ { s/ .*//p }' -} - -find_local_checksum() -{ - set -- $(md5sum "$tempfile") - echo $1 -} - -find_remote_info() -{ - wget -qO- "${1%/*}/VERSION.txt" 2>/dev/null -} - -find_remote_version() -{ - find_remote_info "$1" | \ - sed -ne "s!.*$D4/$D2/$D2 $D2:$D2.*!\\1\\2\\3\\4\\5!p;t" -} - -find_local_version() -{ - if [ -f /rom/etc/banner ]; then - sed -ne "s!.*$D4/$D2/$D2 $D2:$D2.*!\\1\\2\\3\\4\\5!p;t" \ - /rom/etc/banner - else - date +"%Y%m%d%H%M" -r /bin/sh - fi -} - -stop_service() -{ - [ -x /etc/init.d/$1 ] && { - echo -n "Stopping service $1 ... " - /etc/init.d/$1 stop >/dev/null 2>/dev/null - echo "done" - } -} - -do_wait() -{ - if [ ${1:-0} -gt 0 ]; then - echo -n "${2:-Waiting} " - for i in $(seq 1 $1); do - printf "%-2dseconds" $(($1-$i)) - sleep 1 - echo -en "\b\b\b\b\b\b\b\b\b" - done - echo "${NL}" - fi -} - -version_compare() -{ - local v1="$1" - local v2="$2" - - while [ -n "$v1" -o -n "$v2" ]; do - if [ -z "${v2:0:4}" -o "${v1:0:4}" -gt "${v2:0:4}" ]; then - return 1 - elif [ -z "${v1:0:4}" -o "${v1:0:4}" -lt "${v2:0:4}" ]; then - return 2 - fi - - v1="${v1:4}" - v2="${v2:4}" - done - - return 0 -} - -usage() -{ - cat <<EOT - -Usage: - remote-update -h - remote-update [-u <update url>] -c - remote-update [-v] [-y] [-u <update url>] -w - remote-update [-d] [-n] [-v] [-y] [-s <sleep seconds>] [-u <update url>] - -Actions: - -h Display this help message and exit. - -c Check for firmware update and exit. - -w Fetch image and exit, do not perform flash write. - -Options: - -d Do not detach from terminal. - -n Do not backup configuration. - -v Skip verification of downloaded image. - -y Assume defaults for all questions. - - -s <seconds> - Sleep given amount of seconds before starting flash write. - If ommitted and '-y' is not used, 5 seconds are assumed. - - -u <url> - Fetch firmware image from given url. A file "md5sums" is expected - in the same remote directory. If there is no such file, use -v to - suppress verification. - -EOT - - exit 1 -} - - -while getopts "s:u:cdnvwyh" flag; do - case $flag in - s) sleeptime="$OPTARG";; - u) updateurl="$OPTARG";; - c) checkupdate=1;; - d) nodetach=1;; - n) nobackup=1;; - v) noverify=1;; - w) noflash=1;; - y) noquestions=1;; - *) usage;; - esac -done - - -local image_url="$updateurl" -local image_name="${image_url##*/}" - -[ -z "$image_url" ] && { - local arch=$(find_architecture) - local image=$(find_image "$arch") - local repo=$(uci get freifunk.upgrade.repository 2>/dev/null) - repo=${repo:-$(uci get system.upgrade.repository 2>/dev/null)} - - [ -z "$arch" ] && { - echo "Can not determine the current architecture." - exit 1 - } - - [ -z "$repo" ] && { - echo "No repository configured in 'system.upgrade.repository'." - echo "Use the '-u' flag to specify an image location." - exit 1 - } - - [ -z "$image" ] && { - echo "No suitable image for the '$arch' architecture." - echo "Your platform is not supported." - exit 1 - } - - echo "Architecture: $arch" - echo "Repository: $repo" - - image_name="$image" - image_url="${repo%/}/$arch/$image" -} - - -if [ "$checkupdate" = 1 ]; then - local v1=$(find_local_version) - local v2=$(find_remote_version "$image_url") - - [ -n "$v1" -a -n "$v2" ] && { - version_compare "$v1" "$v2" - [ $? == 2 ] && { - echo "Update available!${NL}Local: $v1${NL}Remote: $v2${NL}--" - find_remote_info "$image_url" - exit 0 - } || { - echo "Local version $v1 is up to date" - exit 2 - } - } || { - echo "No remote time stamp found." - exit 1 - } -else - if [ "$noquestions" != 1 ]; then - echo -n "${NL}About to download $image_name. Continue? [y] " - read answer - case "$answer" in - [nN]) exit 1;; - esac - fi - - echo -n "Downloading $image_name ... " - rm -f $tempfile - wget -qO $tempfile "$image_url" 2>/dev/null - [ $? == 0 ] && echo done || { - echo failed - rm -f $tempfile - exit 1 - } - - if [ "$noverify" != 1 ]; then - echo -n "Verifying $image_name ... " - - local md5_remote=$(find_remote_checksum "$image_url" "$image_name") - local md5_local=$(find_local_checksum) - - check_image "$tempfile" - local image_ok=$? - - if [ $image_ok = 0 -a -n "$md5_remote" -a -n "$md5_local" -a "$md5_remote" = "$md5_local" ]; then - echo "done" - else - if [ $image_ok != 0 ]; then - echo "unsupported image type" - else - echo "checksum mismatch! (local:${md5_local:-(none)} remote:${md5_remote:-(none)})" - fi - - local answer=n - if [ "$noquestions" != 1 ]; then - echo -n "${NL}Verification failed. Continue anyway? [n] " - read answer - fi - - case "$answer" in - [yYjJ]*) : ;; - *) - echo "Aborting." - rm -f $tempfile - exit 1 - ;; - esac - fi - fi - - if [ "$noflash" != 1 ]; then - if [ -f "$tempfile" ]; then - if [ "$noquestions" == 1 ]; then - do_wait ${sleeptime:-5} "${NL}About to start flashing, hit <Ctrl-C> to abort!${NL}${NL}Starting in" - else - if [ -z "$nobackup" ]; then - echo -n "${NL}Keep configuration files? [y] " - read answer - case "$answer" in - [nN]) nobackup=1;; - esac - fi - - echo -n "${NL}About to start flashing!${NL}Hit <Enter> to continue or <Ctrl-C> to abort.${NL}" - read answer - fi - - for s in lucid collectd; do stop_service $s; done - - if [ "$nodetach" != 1 ]; then - echo -n "Starting sysupgrade in background ... " - /bin/busybox start-stop-daemon -S -b -x /sbin/sysupgrade -- ${nobackup:+-n} "$tempfile" - echo "done" - else - echo "Executing sysupgrade ... " - exec /sbin/sysupgrade ${nobackup:+-n} "$tempfile" - fi - else - echo "No upgrade image found!" - exit 1 - fi - else - echo "Image saved in '$tempfile'" - fi -fi |