diff options
Diffstat (limited to 'contrib/package/px5g/src/polarssl/rsa.h')
| -rw-r--r-- | contrib/package/px5g/src/polarssl/rsa.h | 309 |
1 files changed, 309 insertions, 0 deletions
diff --git a/contrib/package/px5g/src/polarssl/rsa.h b/contrib/package/px5g/src/polarssl/rsa.h new file mode 100644 index 0000000000..b31dc2f144 --- /dev/null +++ b/contrib/package/px5g/src/polarssl/rsa.h @@ -0,0 +1,309 @@ +/** + * \file rsa.h + * + * Based on XySSL: Copyright (C) 2006-2008 Christophe Devine + * + * Copyright (C) 2009 Paul Bakker <polarssl_maintainer at polarssl dot org> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the names of PolarSSL or XySSL nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef POLARSSL_RSA_H +#define POLARSSL_RSA_H + +#include "polarssl/bignum.h" + +#define POLARSSL_ERR_RSA_BAD_INPUT_DATA -0x0400 +#define POLARSSL_ERR_RSA_INVALID_PADDING -0x0410 +#define POLARSSL_ERR_RSA_KEY_GEN_FAILED -0x0420 +#define POLARSSL_ERR_RSA_KEY_CHECK_FAILED -0x0430 +#define POLARSSL_ERR_RSA_PUBLIC_FAILED -0x0440 +#define POLARSSL_ERR_RSA_PRIVATE_FAILED -0x0450 +#define POLARSSL_ERR_RSA_VERIFY_FAILED -0x0460 +#define POLARSSL_ERR_RSA_OUTPUT_TO_LARGE -0x0470 + +/* + * PKCS#1 constants + */ +#define RSA_RAW 0 +#define RSA_MD2 2 +#define RSA_MD4 3 +#define RSA_MD5 4 +#define RSA_SHA1 5 +#define RSA_SHA256 6 + +#define RSA_PUBLIC 0 +#define RSA_PRIVATE 1 + +#define RSA_PKCS_V15 0 +#define RSA_PKCS_V21 1 + +#define RSA_SIGN 1 +#define RSA_CRYPT 2 + +/* + * DigestInfo ::= SEQUENCE { + * digestAlgorithm DigestAlgorithmIdentifier, + * digest Digest } + * + * DigestAlgorithmIdentifier ::= AlgorithmIdentifier + * + * Digest ::= OCTET STRING + */ +#define ASN1_HASH_MDX \ + "\x30\x20\x30\x0C\x06\x08\x2A\x86\x48" \ + "\x86\xF7\x0D\x02\x00\x05\x00\x04\x10" + +#define ASN1_HASH_SHA1 \ + "\x30\x21\x30\x09\x06\x05\x2B\x0E\x03" \ + "\x02\x1A\x05\x00\x04\x14" + +/** + * \brief RSA context structure + */ +typedef struct +{ + int ver; /*!< always 0 */ + int len; /*!< size(N) in chars */ + + mpi N; /*!< public modulus */ + mpi E; /*!< public exponent */ + + mpi D; /*!< private exponent */ + mpi P; /*!< 1st prime factor */ + mpi Q; /*!< 2nd prime factor */ + mpi DP; /*!< D % (P - 1) */ + mpi DQ; /*!< D % (Q - 1) */ + mpi QP; /*!< 1 / (Q % P) */ + + mpi RN; /*!< cached R^2 mod N */ + mpi RP; /*!< cached R^2 mod P */ + mpi RQ; /*!< cached R^2 mod Q */ + + int padding; /*!< 1.5 or OAEP/PSS */ + int hash_id; /*!< hash identifier */ + int (*f_rng)(void *); /*!< RNG function */ + void *p_rng; /*!< RNG parameter */ +} +rsa_context; + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Initialize an RSA context + * + * \param ctx RSA context to be initialized + * \param padding RSA_PKCS_V15 or RSA_PKCS_V21 + * \param hash_id RSA_PKCS_V21 hash identifier + * \param f_rng RNG function + * \param p_rng RNG parameter + * + * \note The hash_id parameter is actually ignored + * when using RSA_PKCS_V15 padding. + * + * \note Currently (xyssl-0.8), RSA_PKCS_V21 padding + * is not supported. + */ +void rsa_init( rsa_context *ctx, + int padding, + int hash_id, + int (*f_rng)(void *), + void *p_rng ); + +/** + * \brief Generate an RSA keypair + * + * \param ctx RSA context that will hold the key + * \param nbits size of the public key in bits + * \param exponent public exponent (e.g., 65537) + * + * \note rsa_init() must be called beforehand to setup + * the RSA context (especially f_rng and p_rng). + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + */ +int rsa_gen_key( rsa_context *ctx, int nbits, int exponent ); + +/** + * \brief Check a public RSA key + * + * \param ctx RSA context to be checked + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + */ +int rsa_check_pubkey( rsa_context *ctx ); + +/** + * \brief Check a private RSA key + * + * \param ctx RSA context to be checked + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + */ +int rsa_check_privkey( rsa_context *ctx ); + +/** + * \brief Do an RSA public key operation + * + * \param ctx RSA context + * \param input input buffer + * \param output output buffer + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + * + * \note This function does NOT take care of message + * padding. Also, be sure to set input[0] = 0. + * + * \note The input and output buffers must be large + * enough (eg. 128 bytes if RSA-1024 is used). + */ +int rsa_public( rsa_context *ctx, + unsigned char *input, + unsigned char *output ); + +/** + * \brief Do an RSA private key operation + * + * \param ctx RSA context + * \param input input buffer + * \param output output buffer + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + * + * \note The input and output buffers must be large + * enough (eg. 128 bytes if RSA-1024 is used). + */ +int rsa_private( rsa_context *ctx, + unsigned char *input, + unsigned char *output ); + +/** + * \brief Add the message padding, then do an RSA operation + * + * \param ctx RSA context + * \param mode RSA_PUBLIC or RSA_PRIVATE + * \param ilen contains the the plaintext length + * \param input buffer holding the data to be encrypted + * \param output buffer that will hold the ciphertext + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + * + * \note The output buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + */ +int rsa_pkcs1_encrypt( rsa_context *ctx, + int mode, int ilen, + unsigned char *input, + unsigned char *output ); + +/** + * \brief Do an RSA operation, then remove the message padding + * + * \param ctx RSA context + * \param mode RSA_PUBLIC or RSA_PRIVATE + * \param input buffer holding the encrypted data + * \param output buffer that will hold the plaintext + * \param olen will contain the plaintext length + * \param output_max_len maximum length of the output buffer + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + * + * \note The output buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise + * an error is thrown. + */ +int rsa_pkcs1_decrypt( rsa_context *ctx, + int mode, int *olen, + unsigned char *input, + unsigned char *output, + int output_max_len); + +/** + * \brief Do a private RSA to sign a message digest + * + * \param ctx RSA context + * \param mode RSA_PUBLIC or RSA_PRIVATE + * \param hash_id RSA_RAW, RSA_MD{2,4,5} or RSA_SHA{1,256} + * \param hashlen message digest length (for RSA_RAW only) + * \param hash buffer holding the message digest + * \param sig buffer that will hold the ciphertext + * + * \return 0 if the signing operation was successful, + * or an POLARSSL_ERR_RSA_XXX error code + * + * \note The "sig" buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + */ +int rsa_pkcs1_sign( rsa_context *ctx, + int mode, + int hash_id, + int hashlen, + unsigned char *hash, + unsigned char *sig ); + +/** + * \brief Do a public RSA and check the message digest + * + * \param ctx points to an RSA public key + * \param mode RSA_PUBLIC or RSA_PRIVATE + * \param hash_id RSA_RAW, RSA_MD{2,4,5} or RSA_SHA{1,256} + * \param hashlen message digest length (for RSA_RAW only) + * \param hash buffer holding the message digest + * \param sig buffer holding the ciphertext + * + * \return 0 if the verify operation was successful, + * or an POLARSSL_ERR_RSA_XXX error code + * + * \note The "sig" buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + */ +int rsa_pkcs1_verify( rsa_context *ctx, + int mode, + int hash_id, + int hashlen, + unsigned char *hash, + unsigned char *sig ); + +/** + * \brief Free the components of an RSA key + */ +void rsa_free( rsa_context *ctx ); + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int rsa_self_test( int verbose ); + +#ifdef __cplusplus +} +#endif + +#endif /* rsa.h */ |