diff options
Diffstat (limited to 'applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua')
| -rw-r--r-- | applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua | 22 |
1 files changed, 14 insertions, 8 deletions
diff --git a/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua b/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua index 7675b97ff..a783c72e2 100644 --- a/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua +++ b/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua @@ -232,11 +232,12 @@ s:tab("remote_usage", translate("Remote Usage"), translatef("You can use your SIP devices/softphones with this system from a remote location \ as well, as long as your Internet Service Provider gives you a public IP. \ You will be able to call other local users for free (e.g. other Analog Telephone Adapters (ATAs)) \ - and use your VoIP providers to make calls as if you were at local to the PBX. \ + and use your VoIP providers to make calls as if you were local to the PBX. \ After configuring this tab, go back to where users are configured and see the new \ - Server and Port setting you need to configure the SIP devices with. Please note that by default \ - %s uses UDP port range %d to %d for RTP traffic (which carries voice), in case you need to configure \ - NAT or QoS on another device.", appname, defaultrtpstart, defaultrtpend)) + Server and Port setting you need to configure the remote SIP devices with. Please note that if this \ + PBX is not running on your router/gateway, you will need to configure port forwarding (NAT) on your \ + router/gateway. Please forward the ports below (SIP port and RTP range) to the IP address of the \ + device running this PBX.")) s:tab("qos", translate("QoS Settings"), translate("If you experience jittery or high latency audio during heavy downloads, you may want \ @@ -246,16 +247,21 @@ s:tab("qos", translate("QoS Settings"), QoS configuration page (Network->QoS) to configure other critical QoS settings like Download \ and Upload speed.")) +ringtime = s:taboption("general", Value, "ringtime", translate("Number of seconds to ring"), + translate("Set the number of seconds to ring users upon incoming calls before hanging up \ + or going to voicemail, if the voicemail is installed and enabled.")) +ringtime.default = 30 + ua = s:taboption("general", Value, "useragent", translate("User Agent String"), translate("This is the name that the VoIP server will use to identify itself when \ registering to VoIP (SIP) providers. Some providers require this to a specific \ string matching a hardware SIP device.")) ua.default = appname -h = s:taboption("remote_usage", Value, "externhost", translate("Domain Name/Dynamic Domain Name"), - translate("You should either have registered a domain name and have a static IP \ - address, or have configured Dynamic DNS on this router. Enter a \ - domain name which resolves to your external IP address.")) +h = s:taboption("remote_usage", Value, "externhost", translate("Domain/IP Address/Dynamic Domain"), + translate("You can enter your domain name, external IP address, or dynamic domain name here \ + Please keep in mind that if your IP address is dynamic and it changes your configuration \ + will become invalid. Hence, it's recommended to set up Dynamic DNS in this case.")) h.datatype = "hostname" p = s:taboption("remote_usage", Value, "bindport", translate("External SIP Port"), |