diff options
Diffstat (limited to 'applications/luci-openvpn')
| -rw-r--r-- | applications/luci-openvpn/luasrc/i18n/openvpn.en.lua | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/applications/luci-openvpn/luasrc/i18n/openvpn.en.lua b/applications/luci-openvpn/luasrc/i18n/openvpn.en.lua deleted file mode 100644 index 0e48944cd..000000000 --- a/applications/luci-openvpn/luasrc/i18n/openvpn.en.lua +++ /dev/null @@ -1,196 +0,0 @@ -openvpn="OpenVPN" - -openvpn_switch_basic="« Switch to basic configuration" -openvpn_switch_advanced="Switch to advanced configuration »" - -openvpn_enable="Enabled" -openvpn_active="Started" -openvpn_active_no="no" -openvpn_active_yes="yes (%i)" -openvpn_port="Port" -openvpn_proto="Protocol" - -openvpn_instance="Instance \"%s\"" - -openvpn_overview="OpenVPN instances" -openvpn_overview_desc="Below is a list of configured OpenVPN instances and their current state" - -openvpn_service="Daemon configuration" -openvpn_networking="Networking options" -openvpn_vpn="VPN options" -openvpn_cryptography="Cryptography settings" - -openvpn_param_config="Read configuration options from file" -openvpn_param_local="Local host name or ip address" -openvpn_param_remote="Remote host name or ip address" -openvpn_param_remote_random="Randomly choose remote server" -openvpn_param_mode="Major mode" -openvpn_param_proto="Use protocol" -openvpn_param_connect_retry="Connection retry interval" -openvpn_param_connect_timeout="Connection timeout" -openvpn_param_connect_retry_max="Maximum connection attempt retries" -openvpn_param_auto_proxy="Try to sense proxy settings automatically" -openvpn_param_http_proxy="Connect to remote host" -openvpn_param_http_proxy_retry="Retry indefinitely on HTTP proxy errors" -openvpn_param_http_proxy_timeout="Proxy timeout in seconds" -openvpn_param_http_proxy_option="Set extended HTTP proxy options" -openvpn_param_socks_proxy="Connect through Socks5 proxy" -openvpn_param_socks_proxy_retry="Retry indefinitely on Socks proxy errors" -openvpn_param_resolv_retry="If hostname resolve fails, retry" -openvpn_param_float="Allow remote to change its IP or port" -openvpn_param_ipchange="Execute shell command on remote ip change" -openvpn_param_port="TCP/UDP port # for both local and remote" -openvpn_param_lport="TCP/UDP port # for local (default=1194)" -openvpn_param_rport="TCP/UDP port # for remote (default=1194)" -openvpn_param_bind="Bind to local address and port" -openvpn_param_nobind="Do not bind to local address and port" -openvpn_param_dev="tun/tap device" -openvpn_param_dev_type="Type of used device" -openvpn_param_dev_node="Use tun/tap device node" -openvpn_param_lladdr="Set the link layer address of the tap device" -openvpn_param_topology="'net30', 'p2p', or 'subnet'" -openvpn_param_tun_ipv6="Make tun device IPv6 capable" -openvpn_param_ifconfig="Configure device to use IP address" -openvpn_param_ifconfig_noexec="Don't actually execute ifconfig" -openvpn_param_ifconfig_nowarn="Don't warn on ifconfig inconsistencies" -openvpn_param_route="Add route after establishing connection" -openvpn_param_route_gateway="Specify a default gateway for routes" -openvpn_param_route_metric="Specify a default metric for routes" -openvpn_param_route_delay="Delay n seconds after connection " -openvpn_param_route_up="Execute shell cmd after routes are added" -openvpn_param_route_noexec="Don't add routes automatically" -openvpn_param_route_nopull="Don't pull options from server" -openvpn_param_redirect_gateway="Automatically redirect default route" -openvpn_param_setenv="Pass environment variables to script" -openvpn_param_shaper="Shaping for peer bandwidth" -openvpn_param_keepalive="Set timeouts in server mode" -openvpn_param_inactive="tun/tap inactivity timeout" -openvpn_param_ping_exit="Remote ping timeout" -openvpn_param_ping_restart="Restart after remote ping timeout" -openvpn_param_ping_timer_rem="Only process ping timeouts if routes exist" -openvpn_param_ping="Ping remote every n seconds over TCP/UDP port" -openvpn_param_multihome="Configure a multi-homed UDP server" -openvpn_param_fast_io="Optimize TUN/TAP/UDP writes" -openvpn_param_remap_usr1="Remap SIGUSR1 signals" -openvpn_param_persist_tun="Keep tun/tap device open on restart" -openvpn_param_persist_remote_ip="Keep remote IP address on restart" -openvpn_param_persist_local_ip="Keep local IP address on restart" -openvpn_param_persist_key="Don't re-read key on restart" -openvpn_param_passtos="TOS passthrough (applies to IPv4 only)" -openvpn_param_tun_mtu="Set tun/tap device MTU" -openvpn_param_tun_mtu_extra="Set tun/tap device overhead" -openvpn_param_link_mtu="Set TCP/UDP MTU" -openvpn_param_mtu_disc="Enable Path MTU discovery" -openvpn_param_mtu_test="Empirically measure MTU" -openvpn_param_fragment="Enable internal datagram fragmentation" -openvpn_param_mssfix="Set upper bound on TCP MSS" -openvpn_param_sndbuf="Set the TCP/UDP send buffer size" -openvpn_param_rcvbuf="Set the TCP/UDP receive buffer size" -openvpn_param_txqueuelen="Set tun/tap TX queue length" -openvpn_param_mlock="Disable Paging" -openvpn_param_up="Shell cmd to execute after tun device open" -openvpn_param_up_delay="Delay tun/tap open and up script execution" -openvpn_param_down="Shell cmd to run after tun device close" -openvpn_param_down_pre="Call down cmd/script before TUN/TAP close" -openvpn_param_up_restart="Run up/down scripts for all restarts" -openvpn_param_user="Set UID to user" -openvpn_param_group="Set GID to group" -openvpn_param_chroot="Chroot to directory after initialization" -openvpn_param_cd="Change to directory before initialization" -openvpn_param_daemon="Daemonize after initialization" -openvpn_param_syslog="Output to syslog and do not daemonize" -openvpn_param_inetd="Run as an inetd or xinetd server" -openvpn_param_log="Write log to file" -openvpn_param_log_append="Append log to file" -openvpn_param_suppress_timestamps="Don't log timestamps" -openvpn_param_writepid="Write process ID to file" -openvpn_param_nice="Change process priority" -openvpn_param_echo="Echo parameters to log" -openvpn_param_verb="Set output verbosity" -openvpn_param_mute="Limit repeated log messages" -openvpn_param_status="Write status to file every n seconds" -openvpn_param_status_version="Status file format version" -openvpn_param_disable_occ="Disable options consistency check" -openvpn_param_gremlin="Special stress testing mode" -openvpn_param_comp_lzo="Use fast LZO compression" -openvpn_param_comp_noadapt="Don't use adaptive lzo compression" -openvpn_param_management="Enable management interface on <IP> <port>" -openvpn_param_management_client="Management interface will connect as a TCP client" -openvpn_param_management_query_passwords="Query management channel for private key" -openvpn_param_management_hold="Start OpenVPN in a hibernating state" -openvpn_param_management_signal="Issue SIGUSR1 on management disconnect" -openvpn_param_management_forget_disconnect="Forget passwords on management disconnect" -openvpn_param_management_log_cache="Number of lines for log file history" -openvpn_param_plugin="Load plug-in module" -openvpn_param_server="Configure server mode" -openvpn_param_server_bridge="Configure server bridge" -openvpn_param_push="Push options to peer" -openvpn_param_push_reset="Don't inherit global push options" -openvpn_param_ifconfig_pool="Set aside a pool of subnets" -openvpn_param_ifconfig_pool_linear="Use individual addresses rather than /30 subnets" -openvpn_param_ifconfig_pool_persist="Persist/unpersist ifconfig-pool" -openvpn_param_ifconfig_push="Push an ifconfig option to remote" -openvpn_param_iroute="Route subnet to client" -openvpn_param_disable="Client is disabled" -openvpn_param_client_cert_not_required="Don't require client certificate" -openvpn_param_username_as_common_name="Use username as common name" -openvpn_param_auth_user_pass_verify="Script to verify interactive authentication" -openvpn_param_client_to_client="Allow client-to-client traffic" -openvpn_param_duplicate_cn="Allow multiple clients with same certificate" -openvpn_param_client_connect="Run script cmd on client connection" -openvpn_param_client_disconnect="Run script cmd on client disconnection" -openvpn_param_client_config_dir="Directory for custom client config files" -openvpn_param_ccd_exclusive="Refuse connection if no custom client config" -openvpn_param_tmp_dir="Temporary directory for client-connect return file" -openvpn_param_hash_size="Set size of real and virtual address hash tables" -openvpn_param_bcast_buffers="Number of allocated broadcast buffers" -openvpn_param_tcp_queue_limit="Maximum number of queued TCP output packets" -openvpn_param_learn_address="Script to validate client virtual addresses" -openvpn_param_connect_freq="Allowed maximum of new connections" -openvpn_param_max_clients="Allowed maximum of connected clients" -openvpn_param_max_routes_per_client="Allowed maximum of internal" -openvpn_param_port_share="Proxy incoming HTTPS sessions" -openvpn_param_client="Configure client mode" -openvpn_param_auth_user_pass="Authenticate using username/password" -openvpn_param_pull="Accept options pushed from server" -openvpn_param_auth_retry="Handling of authentication failures" -openvpn_param_explicit_exit_notify="Send notification to peer on disconnect" -openvpn_param_secret="Enable Static Key encryption mode (non-TLS)" -openvpn_param_auth="HMAC authentication for packets" -openvpn_param_cipher="Encryption cipher for packets" -openvpn_param_keysize="Size of cipher key" -openvpn_param_engine="Enable OpenSSL hardware crypto engines" -openvpn_param_no_replay="Disable replay protection" -openvpn_param_mute_replay_warnings="Silence the output of replay warnings" -openvpn_param_replay_window="Replay protection sliding window size" -openvpn_param_no_iv="Disable cipher initialisation vector" -openvpn_param_replay_persist="Persist replay-protection state" -openvpn_param_test_crypto="Run a self-test of crypto features" -openvpn_param_tls_server="Enable TLS and assume server role" -openvpn_param_tls_client="Enable TLS and assume client role" -openvpn_param_key_method="Data channel key exchange method" -openvpn_param_ca="Certificate authority" -openvpn_param_capath="Directory of trusted certificates (CAs and CRLs)" -openvpn_param_dh="Diffie Hellman parameters" -openvpn_param_cert="Local certificate" -openvpn_param_key="Local private key" -openvpn_param_pkcs12="PKCS#12 file containing keys" -openvpn_param_tls_cipher="TLS cipher" -openvpn_param_tls_timeout="Retransmit timeout on TLS control channel" -openvpn_param_reneg_bytes="Renegotiate data chan. key after bytes" -openvpn_param_reneg_pkts="Renegotiate data chan. key after packets" -openvpn_param_reneg_sec="Renegotiate data chan. key after seconds" -openvpn_param_hand_window="Timeframe for key exchange" -openvpn_param_tran_window="Key transition window" -openvpn_param_single_session="Allow only one session" -openvpn_param_tls_exit="Exit on TLS negotiation failure" -openvpn_param_tls_auth="Additional authentication over TLS" -openvpn_param_askpass="Get PEM password from controlling tty before we daemonize" -openvpn_param_auth_nocache="Don't cache --askpass or --auth-user-pass passwords" -openvpn_param_crl_verify="Check peer certificate against a CRL" -openvpn_param_tls_verify="Shell command to verify X509 name" -openvpn_param_tls_remote="Only accept connections from given X509 name" -openvpn_param_ns_cert_type="Require explicit designation on certificate" -openvpn_param_remote_cert_ku="Require explicit key usage on certificate" -openvpn_param_remote_cert_eku="Require extended explicit key usage on certificate" -openvpn_param_remote_cert_tls="Require normal and extended key usage on certificate" |