summaryrefslogtreecommitdiffhomepage
path: root/applications/luci-olsr/luasrc
diff options
context:
space:
mode:
Diffstat (limited to 'applications/luci-olsr/luasrc')
-rw-r--r--applications/luci-olsr/luasrc/model/cbi/olsr/olsrd.lua209
-rw-r--r--applications/luci-olsr/luasrc/model/cbi/olsr/olsrdplugins.lua74
2 files changed, 179 insertions, 104 deletions
diff --git a/applications/luci-olsr/luasrc/model/cbi/olsr/olsrd.lua b/applications/luci-olsr/luasrc/model/cbi/olsr/olsrd.lua
index 113ab01e4..4ce891da6 100644
--- a/applications/luci-olsr/luasrc/model/cbi/olsr/olsrd.lua
+++ b/applications/luci-olsr/luasrc/model/cbi/olsr/olsrd.lua
@@ -14,92 +14,149 @@ $Id$
require("luci.tools.webadmin")
-m = Map("olsrd", translate("OLSR Daemon"))
+m = Map("olsrd", translate("OLSR Daemon"),
+ translate("The OLSR daemon is an implementation of the Optimized Link State Routing protocol. "..
+ "As such it allows mesh routing for any network equipment. "..
+ "It runs on any wifi card that supports ad-hoc mode and of course on any ethernet device. "..
+ "Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and documentation."))
s = m:section(TypedSection, "olsrd", translate("General settings"))
s.dynamic = true
s.anonymous = true
-debug = s:option(ListValue, "DebugLevel", translate("Debugmode"))
+ipv = s:option(ListValue, "IpVersion", translate("Internet protocol"),
+ translate("IP-version to use. If 6and4 is selected then one olsrd instance is started for each protocol."))
+ipv:value("4", "IPv4")
+ipv:value("6", "IPv6")
+ipv:value("6and4", "6and4")
+
+debug = s:option(ListValue, "DebugLevel", translate("Debugmode"), translate("Debug level to use. This should usually stay at 0."))
for i=0, 9 do
debug:value(i)
end
debug.optional = true
-ipv = s:option(ListValue, "IpVersion", translate("Internet protocol"))
-ipv:value("4", "IPv4")
-ipv:value("6", "IPv6")
+clrscr = s:option(Flag, "ClearScreen", translate ("Clear screen"),
+ translate("Clear the screen each time the internal state changes. Default is \"yes\"."))
+clrscr.default = "yes"
+clrscr.enabled = "yes"
+clrscr.disabled = "no"
+clrscr.optional = true
-noint = s:option(Flag, "AllowNoInt", translate("Start without network"))
+noint = s:option(Flag, "AllowNoInt", translate("Start without network"),
+ translate("If this is set to \"yes\" then olsrd also starts when no network devices are found."))
+noint.default = "yes"
noint.enabled = "yes"
noint.disabled = "no"
noint.optional = true
-s:option(Value, "Pollrate", translate("Pollrate")).optional = true
+s:option(Value, "Pollrate", translate("Pollrate"),
+ translate("Polling rate for OLSR sockets in seconds. Default is 0.05.")).optional = true
-tcr = s:option(ListValue, "TcRedundancy", translate("TC redundancy"))
-tcr:value("0", translate("MPR selectors"))
-tcr:value("1", translate("MPR selectors and MPR"))
-tcr:value("2", translate("all neighbours"))
-tcr.optional = true
+s:option(Value, "NicChgsPollInt", translate("Nic changes poll interval"),
+ translate("Interval to poll network interfaces for configuration changes (in seconds). Default is \"2.5\".")).optional = true
-s:option(Value, "MprCoverage", translate("MPR coverage")).optional = true
+s:option(Value, "TosValue", translate("TOS value"),
+ translate("Type of service value for the IP header of control traffic. Default is \"16\".")).optional = true
-lql = s:option(ListValue, "LinkQualityLevel", translate("LQ level"))
-lql:value("0", translate("disable"))
-lql:value("1", translate("MPR selection"))
-lql:value("2", translate("MPR selection and routing"))
-lql.optional = true
+fib = s:option(ListValue, "FIBMetric", translate("FIB metric"),
+ translate ("FIBMetric controls the metric value of the host-routes OLSRd sets. "..
+ "\"flat\" means that the metric value is always 2. This is the preferred value "..
+ "because it helps the linux kernel routing to clean up older routes. "..
+ "\"correct\" uses the hopcount as the metric value. "..
+ "\"approx\" use the hopcount as the metric value too, but does only update the hopcount if the nexthop changes too. "..
+ "Default is \"flat\"."))
+fib.optional = true
+fib:value("flat")
+fib:value("correct")
+fib:value("approx")
+fib.optional = true
-s:option(Value, "LinkQualityAging", translate("LQ aging")).optional = true
+lql = s:option(ListValue, "LinkQualityLevel", translate("LQ level"),
+ translate("Link quality level switch between hopcount and cost-based (mostly ETX) routing.<br />"..
+ "<b>0</b> = do not use link quality<br />"..
+ "<b>2</b> = use link quality for MPR selection and routing<br />"..
+ "Default is \"2\""))
+lql:value("2")
+lql:value("0")
+lql.optional = true
-lqa = s:option(ListValue, "LinkQualityAlgorithm", translate("LQ algorithm"))
+lqage = s:option(Value, "LinkQualityAging", translate("LQ aging"),
+ translate("Link quality aging factor (only for lq level 2). Tuning parameter for etx_float and etx_fpm, smaller values "..
+ "mean slower changes of ETX value. (allowed values are between 0.01 and 1.0)"))
+lqage.optional = true
+lqage:depends("LinkQualityLevel", "2")
+
+lqa = s:option(ListValue, "LinkQualityAlgorithm", translate("LQ algorithm"),
+ translate("Link quality algorithm (only for lq level 2).<br />"..
+ "<b>etx_float</b>: floating point ETX with exponential aging<br />"..
+ "<b>etx_fpm</b> : same as ext_float, but with integer arithmetic<br />"..
+ "<b>etx_ff</b> : ETX freifunk, an etx variant which use all OLSR traffic (instead of only hellos) for ETX calculation<br />"..
+ "<b>etx_ffeth</b>: incompatible variant of etx_ff that allows ethernet links with ETX 0.1.<br />"..
+ "Defaults to \"etx_ff\""))
lqa.optional = true
-lqa:value("etx_fpm", translate("fixed point math"))
-lqa:value("etx_float", translate("floating point"))
-lqa:value("etx_ff", translate("Freifunk"))
+lqa:value("etx_ff")
+lqa:value("etx_fpm")
+lqa:value("etx_float")
+lqa:value("etx_ffeth")
+lqa:depends("LinkQualityLevel", "2")
lqa.optional = true
-lqfish = s:option(Flag, "LinkQualityFishEye", translate("LQ fisheye"))
+lqfish = s:option(Flag, "LinkQualityFishEye", translate("LQ fisheye"),
+ translate("Fisheye mechanism for TCs (checked means on). Default is \"on\""))
+lqfish.default = "1"
lqfish.optional = true
-s:option(Value, "LinkQualityWinSize", translate("LQ window size")).optional = true
-
-s:option(Value, "LinkQualityDijkstraLimit", translate("LQ Dijkstra limit")).optional = true
-
-hyst = s:option(Flag, "UseHysteresis", translate("Use hysteresis"))
+hyst = s:option(Flag, "UseHysteresis", translate("Use hysteresis"),
+ translate("Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more robustness to the link sensing "..
+ "but delays neighbor registration. Defaults is \"yes\""))
+hyst.default = "yes"
hyst.enabled = "yes"
hyst.disabled = "no"
+hyst:depends("LinkQualityLevel", "0")
hyst.optional = true
-fib = s:option(ListValue, "FIBMetric", translate("FIB metric"))
-fib.optional = true
-fib:value("flat")
-fib:value("correct")
-fib:value("approx")
-fib.optional = true
+port = s:option(Value, "OlsrPort", translate("Port"),
+ translate("The port OLSR uses. This should usually stay at the IANA assigned port 698. It can have a value between 1 and 65535."))
+port.optional = true
+port.default = "698"
+port.rmempty = true
-clrscr = s:option(Flag, "ClearScreen", translate ("Clear screen"))
-clrscr.enabled = "yes"
-clrscr.disabled = "no"
-clrscr.optional = true
+mainip = s:option(Value, "MainIp", translate("Main IP"),
+ translate("Sets the main IP (originator ip) of the router. This IP will NEVER change during the uptime of olsrd. "..
+ "Default is 0.0.0.0, which triggers usage of the IP of the first interface."))
+mainip.optional = true
+mainip.rmempty = true
-willingness = s:option(ListValue, "Willingness", translate("Willingness"))
+willingness = s:option(ListValue, "Willingness", translate("Willingness"),
+ translate("The fixed willingness to use. If not set willingness will be calculated dynamically based on battery/power status. Default is \"3\"."))
for i=0,7 do
willingness:value(i)
end
willingness.optional = true
-natthr = s:option(Value, "NatThreshold", translate("NAT threshold"))
+natthr = s:option(Value, "NatThreshold", translate("NAT threshold"),
+ translate("If the route to the current gateway is to be changed, the ETX value of this gateway is "..
+ "multiplied with this value before it is compared to the new one. "..
+ "The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 if changed.<br />"..
+ "<b>WARNING:</b> This parameter should not be used together with the etx_ffeth metric!<br />"..
+ "Defaults to \"1.0\"."))
+for i=1,0.1,-0.1 do
+ natthr:value(i)
+end
+natthr:depends("LinkQualityAlgorithm", "etx_ff")
+natthr:depends("LinkQualityAlgorithm", "etx_float")
+natthr:depends("LinkQualityAlgorithm", "etx_fpm")
+natthr.default = 1
natthr.optional = true
-
i = m:section(TypedSection, "Interface", translate("Interfaces"))
i.anonymous = true
i.addremove = true
i.dynamic = true
-ign = i:option(Flag, "ignore", translate("Enable"))
+ign = i:option(Flag, "ignore", translate("Enable"),
+ translate("Enable this interface."))
ign.enabled = "0"
ign.disabled = "1"
ign.rmempty = false
@@ -107,18 +164,33 @@ function ign.cfgvalue(self, section)
return Flag.cfgvalue(self, section) or "0"
end
-network = i:option(ListValue, "interface", translate("Network"))
+network = i:option(ListValue, "interface", translate("Network"),
+ translate("The interface where OLSRd should run. If \"Default\" is selected then the settings made "..
+ "here are used for all other interfaces unless overwritten."))
luci.tools.webadmin.cbi_add_networks(network)
+network:value("Default")
-i:option(Value, "Ip4Broadcast", translate("IPv4 broadcast")).optional = true
+mode = i:option(ListValue, "Mode", translate("Mode"),
+ translate("Interface Mode is used to prevent unnecessary packet forwarding on switched ethernet interfaces. "..
+ "valid Modes are \"mesh\" and \"ether\". Default is \"mesh\"."))
+mode:value("mesh")
+mode:value("ether")
+mode.optional = true
+mode.rmempty = true
-ip6t = i:option(ListValue, "Ip6AddrType", translate("IPv6 address type"))
-ip6t:value("", translate("-- Please choose --"))
-ip6t:value("auto")
-ip6t:value("site-local")
-ip6t:value("unique-local")
-ip6t:value("global")
-ip6t.optional = true
+i:option(Value, "Ip4Broadcast", translate("IPv4 broadcast"),
+ translate("IPv4 broadcast address for outgoing OLSR packets. One useful example would be 255.255.255.255. "..
+ "Default is \"0.0.0.0\", which triggers the usage of the interface broadcast IP.")).optional = true
+
+i:option(Value, "IPv6Multicast", translate("IPv6 multicast"),
+ translate("IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal multicast.")).optional = true
+
+i:option(Value, "IPv4Src", translate("IPv4 source"),
+ translate("IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which triggers usage of the interface IP.")).optional = true
+
+i:option(Value, "IPv6Src", translate("IPv6 source"),
+ translate("IPv6 src prefix. OLSRd will choose one of the interface IPs which matches the prefix of this parameter. "..
+ "Default is \"0::/0\", which triggers the usage of a not-linklocal interface IP.")).optional = true
i:option(Value, "HelloInterval", translate("Hello interval")).optional = true
i:option(Value, "HelloValidityTime", translate("Hello validity time")).optional = true
@@ -129,23 +201,20 @@ i:option(Value, "MidValidityTime", translate("MID validity time")).optional = tr
i:option(Value, "HnaInterval", translate("HNA interval")).optional = true
i:option(Value, "HnaValidityTime", translate("HNA validity time")).optional = true
-adc = i:option(Flag, "AutoDetectChanges", translate("Autodetect changes"))
-adc.enabled = "yes"
-adc.disabled = "no"
-adc.optional = true
-
---[[
-ipc = m:section(TypedSection, "IpcConnect")
-ipc.anonymous = true
-
-conns = ipc:option(Value, "MaxConnections")
-conns.isInteger = true
-
-nets = ipc:option(Value, "Net")
-nets.optional = true
-
-hosts = ipc:option(Value, "Host")
-hosts.optional = true
-]]
+i:option(Value, "Weight", translate("Weight"),
+ translate("When multiple links exist between hosts the weight of interface is used to determine the link to use. "..
+ "Normally the weight is automatically calculated by olsrd based on the characteristics of the interface, "..
+ "but here you can specify a fixed value. Olsrd will choose links with the lowest value.<br />"..
+ "<b>Note:</b> Interface weight is used only when LinkQualityLevel is set to 0. "..
+ "For any other value of LinkQualityLevel, the interface ETX value is used instead.")).optional = true
+
+lqmult = i:option(DynamicList, "LinkQualityMult", translate("LinkQuality Multiplicator"),
+ translate("Multiply routes with the factor given here. Allowed values are between 0.01 and 1. "..
+ "It is only used when LQ-Level is greater than 0. Examples:<br />"..
+ "reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />"..
+ "reduce LQ to all nodes on this interface by 20%: default 0.8"))
+lqmult.optional = true
+lqmult.rmempty = true
+lqmult.cast = "table"
return m
diff --git a/applications/luci-olsr/luasrc/model/cbi/olsr/olsrdplugins.lua b/applications/luci-olsr/luasrc/model/cbi/olsr/olsrdplugins.lua
index 044032c64..2cfccdd36 100644
--- a/applications/luci-olsr/luasrc/model/cbi/olsr/olsrdplugins.lua
+++ b/applications/luci-olsr/luasrc/model/cbi/olsr/olsrdplugins.lua
@@ -74,45 +74,51 @@ if arg[1] then
local knownPlParams = {
["olsrd_bmf.so.1.5.3"] = {
- { Value, "BmfInterface", "bmf0" },
- { Value, "BmfInterfaceIp", "10.10.10.234/24" },
- { Flag, "DoLocalBroadcast", "no" },
- { Flag, "CapturePacketsOnOlsrInterfaces", "yes" },
+ { Value, "BmfInterface", "bmf0" },
+ { Value, "BmfInterfaceIp", "10.10.10.234/24" },
+ { Flag, "DoLocalBroadcast", "no" },
+ { Flag, "CapturePacketsOnOlsrInterfaces", "yes" },
{ ListValue, "BmfMechanism", { "UnicastPromiscuous", "Broadcast" } },
- { Value, "BroadcastRetransmitCount", "2" },
- { Value, "FanOutLimit", "4" },
+ { Value, "BroadcastRetransmitCount", "2" },
+ { Value, "FanOutLimit", "4" },
{ DynamicList, "NonOlsrIf", "br-lan" }
},
["olsrd_dyn_gw.so.0.4"] = {
- { Value, "Interval", "40" },
- { DynamicList, "Ping", "141.1.1.1" },
- { DynamicList, "HNA", "192.168.80.0/24", IpMask2Cidr, Cidr2IpMask }
+ { Value, "Interval", "40" },
+ { DynamicList, "Ping", "141.1.1.1" },
+ { DynamicList, "HNA", "192.168.80.0/24", IpMask2Cidr, Cidr2IpMask }
},
["olsrd_httpinfo.so.0.1"] = {
- { Value, "port", "80" },
- { DynamicList, "Host", "163.24.87.3" },
- { DynamicList, "Net", "0.0.0.0/0", IpMask2Cidr, Cidr2IpMask }
+ { Value, "port", "80" },
+ { DynamicList, "Host", "163.24.87.3" },
+-- { DynamicList, "Net", "0.0.0.0/0", IpMask2Cidr, Cidr2IpMask }
+ { DynamicList, "Net", "0.0.0.0/0", Cidr2IpMask }
},
["olsrd_nameservice.so.0.3"] = {
- { DynamicList, "name", "my-name.mesh" },
- { DynamicList, "hosts", "1.2.3.4 name-for-other-interface.mesh" },
- { Value, "suffix", ".olsr" },
- { Value, "hosts_file", "/path/to/hosts_file" },
- { Value, "add_hosts", "/path/to/file" },
- { Value, "dns_server", "141.1.1.1" },
- { Value, "resolv_file", "/path/to/resolv.conf" },
- { Value, "interval", "120" },
- { Value, "timeout", "240" },
- { Value, "lat", "12.123" },
- { Value, "lon", "12.123" },
- { Value, "latlon_file", "/var/run/latlon.js" },
- { Value, "latlon_infile", "/var/run/gps.txt" },
- { Value, "sighup_pid_file", "/var/run/dnsmasq.pid" },
- { Value, "name_change_script", "/usr/local/bin/announce_new_hosts.sh" },
- { Value, "services_change_script", "/usr/local/bin/announce_new_services.sh" }
+ { DynamicList, "name", "my-name.mesh" },
+ { DynamicList, "hosts", "1.2.3.4 name-for-other-interface.mesh" },
+ { Value, "suffix", ".olsr" },
+ { Value, "hosts_file", "/path/to/hosts_file" },
+ { Value, "add_hosts", "/path/to/file" },
+ { Value, "dns_server", "141.1.1.1" },
+ { Value, "resolv_file", "/path/to/resolv.conf" },
+ { Value, "interval", "120" },
+ { Value, "timeout", "240" },
+ { Value, "lat", "12.123" },
+ { Value, "lon", "12.123" },
+ { Value, "latlon_file", "/var/run/latlon.js" },
+ { Value, "latlon_infile", "/var/run/gps.txt" },
+ { Value, "sighup_pid_file", "/var/run/dnsmasq.pid" },
+ { Value, "name_change_script", "/usr/local/bin/announce_new_hosts.sh" },
+ { DynamicList, "service", "http://me.olsr:80|tcp|my little homepage" },
+ { Value, "services_file", "/var/run/services_olsr" },
+ { Value, "services_change_script", "/usr/local/bin/announce_new_services.sh" },
+ { DynamicList, "mac", "xx:xx:xx:xx:xx:xx[,0-255]" },
+ { Value, "macs_file", "/path/to/macs_file" },
+ { Value, "macs_change_script", "/path/to/script" }
},
["olsrd_quagga.so.0.2.2"] = {
@@ -121,21 +127,21 @@ if arg[1] then
"ospf6", "isis", "bgp", "hsls"
} },
{ ListValue, "ExportRoutes", { "only", "both" } },
- { Flag, "LocalPref", "true" },
- { Value, "Distance", Range(0,255) }
+ { Flag, "LocalPref", "true" },
+ { Value, "Distance", Range(0,255) }
},
["olsrd_secure.so.0.5"] = {
- { Value, "Keyfile", "/etc/private-olsr.key" }
+ { Value, "Keyfile", "/etc/private-olsr.key" }
},
["olsrd_txtinfo.so.0.1"] = {
- { Value, "accept", "10.247.200.4" }
+ { Value, "accept", "10.247.200.4" }
},
["olsrd_watchdog.so.0.1"] = {
- { Value, "file", "/var/run/olsrd.watchdog" },
- { Value, "interval", "30" }
+ { Value, "file", "/var/run/olsrd.watchdog" },
+ { Value, "interval", "30" }
},
["olsrd_mdns.so.1.0.0"] = {
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 11:29:56 +0000