diff options
Diffstat (limited to 'applications/luci-meshwizard')
5 files changed, 0 insertions, 234 deletions
diff --git a/applications/luci-meshwizard/Makefile b/applications/luci-meshwizard/Makefile deleted file mode 100644 index 6d60a5201..000000000 --- a/applications/luci-meshwizard/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -PO = meshwizard - -include ../../build/config.mk -include ../../build/module.mk diff --git a/applications/luci-meshwizard/ipkg/postinst b/applications/luci-meshwizard/ipkg/postinst deleted file mode 100644 index 0599082ef..000000000 --- a/applications/luci-meshwizard/ipkg/postinst +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/sh -[ -n "${IPKG_INSTROOT}" ] || { - ( . /etc/uci-defaults/meshwizard ) && rm -f /etc/uci-defaults/meshwizard -} diff --git a/applications/luci-meshwizard/luasrc/controller/meshwizard.lua b/applications/luci-meshwizard/luasrc/controller/meshwizard.lua deleted file mode 100644 index 942987db5..000000000 --- a/applications/luci-meshwizard/luasrc/controller/meshwizard.lua +++ /dev/null @@ -1,19 +0,0 @@ ---[[ -LuCI - Lua Configuration Interface - -Copyright 2011 Manuel Munz <freifunk somakoma de> - -Licensed under the Apache License, Version 2.0 (the "License"); -you may not use this file except in compliance with the License. -You may obtain a copy of the License at - -http://www.apache.org/licenses/LICENSE-2.0 - -]]-- - -module "luci.controller.meshwizard" - -function index() - entry({"admin", "freifunk", "meshwizard"}, cbi("freifunk/meshwizard"), _("Mesh Wizard"), 40) -end - diff --git a/applications/luci-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua b/applications/luci-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua deleted file mode 100644 index 68f7a5a25..000000000 --- a/applications/luci-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua +++ /dev/null @@ -1,199 +0,0 @@ --- wizard rewrite wip - -local uci = require "luci.model.uci".cursor() -local sys = require "luci.sys" -local util = require "luci.util" -local ip = require "luci.ip" - -local community = "profile_" .. (uci:get("freifunk", "community", "name") or "Freifunk") -local mesh_network = ip.IPv4(uci:get_first(community, "community", "mesh_network") or "10.0.0.0/8") -local community_ipv6 = uci:get_first(community, "community", "ipv6") or 0 -local community_ipv6mode = uci:get_first(community, "community", "ipv6_config") or "static" -local meshkit_ipv6 = uci:get("meshwizard", "ipv6", "enabled") or 0 -local community_vap = uci:get_first(community, "community", "vap") or 0 - -m = Map("meshwizard", translate("Wizard"), translate("This wizard will assist you in setting up your router for Freifunk " .. - "or another similar wireless community network.")) - -n = m:section(NamedSection, "netconfig", nil, translate("Interfaces")) -n.anonymous = true - --- common functions - -function cbi_configure(device) - local configure = n:taboption(device, Flag, device .. "_config", translate("Configure this interface"), - translate("Note: this will set up this interface for mesh operation, i.e. add it to zone 'freifunk' and enable olsr.")) -end - -function cbi_ip4addr(device) - local ip4addr = n:taboption(device, Value, device .. "_ip4addr", translate("Mesh IP address"), - translate("This is a unique address in the mesh (e.g. 10.1.1.1) and has to be registered at your local community.")) - ip4addr:depends(device .. "_config", 1) - ip4addr.datatype = "ip4addr" - function ip4addr.validate(self, value) - local x = ip.IPv4(value) - if mesh_network:contains(x) then - return value - else - return nil, translate("The given IP address is not inside the mesh network range ") .. - "(" .. mesh_network:string() .. ")." - end - end -end - -function cbi_ip6addr(device) - local ip6addr = n:taboption(device, Value, device .. "_ip6addr", translate("Mesh IPv6 address"), - translate("This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and has to be registered at your local community.")) - ip6addr:depends(device .. "_config", 1) - ip6addr.datatype = "ip6addr" -end - - -function cbi_dhcp(device) - local dhcp = n:taboption(device, Flag, device .. "_dhcp", translate("Enable DHCP"), - translate("DHCP will automatically assign ip addresses to clients")) - dhcp:depends(device .. "_config", 1) - dhcp.rmempty = true -end - -function cbi_ra(device) - local ra = n:taboption(device, Flag, device .. "_ipv6ra", translate("Enable RA"), - translate("Send router advertisements on this device.")) - ra:depends(device .. "_config", 1) - ra.rmempty = true -end - -function cbi_dhcprange(device) - local dhcprange = n:taboption(device, Value, device .. "_dhcprange", translate("DHCP IP range"), - translate("The IP range from which clients are assigned ip addresses (e.g. 10.1.2.1/28). " .. - "If this is a range inside your mesh network range, then it will be announced as HNA. Any other range will use NAT. " .. - "If left empty then the defaults from the community profile will be used.")) - dhcprange:depends(device .. "_dhcp", "1") - dhcprange.rmempty = true - dhcprange.datatype = "ip4addr" -end --- create tabs and config for wireless -local nets={} -uci:foreach("wireless", "wifi-device", function(section) - local device = section[".name"] - table.insert(nets, device) -end) - -local wired_nets = {} -uci:foreach("network", "interface", function(section) - local device = section[".name"] - if not util.contains(nets, device) and device ~= "loopback" and not device:find("wireless") then - table.insert(nets, device) - table.insert(wired_nets, device) - end -end) - -for _, net in util.spairs(nets, function(a,b) return (nets[a] < nets[b]) end) do - n:tab(net, net) -end - --- create cbi config for wireless -uci:foreach("wireless", "wifi-device", function(section) - local device = section[".name"] - local hwtype = section.type - local syscc = section.country or uci:get(community, "wifi_device", "country") or - uci:get("freifunk", "wifi_device", "country") - - cbi_configure(device) - - -- Channel selection - - if hwtype == "atheros" then - local cc = util.trim(sys.exec("grep -i '" .. syscc .. "' /lib/wifi/cc_translate.txt |cut -d ' ' -f 2")) or 0 - sys.exec('"echo " .. cc .. " > /proc/sys/dev/" .. device .. "/countrycode"') - elseif hwtype == "mac80211" then - sys.exec("iw reg set " .. syscc) - elseif hwtype == "broadcom" then - sys.exec ("wlc country " .. syscc) - end - - local chan = n:taboption(device, ListValue, device .. "_channel", translate("Channel"), - translate("Your device and neighbouring nodes have to use the same channel.")) - chan:depends(device .. "_config", 1) - chan:value('default') - - local iwinfo = sys.wifi.getiwinfo(device) - if iwinfo and iwinfo.freqlist then - for _, f in ipairs(iwinfo.freqlist) do - if not f.restricted then - chan:value(f.channel) - end - end - end - -- IPv4 address - cbi_ip4addr(device) - - -- DHCP enable - cbi_dhcp(device) - - -- DHCP range - cbi_dhcprange(device) - - -- IPv6 addr and RA - if community_ipv6 == "1" then - if community_ipv6mode == "static" then - cbi_ip6addr(device) - end - cbi_ra(device) - end - - -- Enable VAP - local supports_vap = 0 - if sys.call("/usr/bin/meshwizard/helpers/supports_vap.sh " .. device .. " " .. hwtype) == 0 then - supports_vap = 1 - end - if supports_vap == 1 then - local vap = n:taboption(device, Flag, device .. "_vap", translate("Virtual Access Point (VAP)"), - translate("This will setup a new virtual wireless interface in Access Point mode.")) - vap:depends(device .. "_dhcp", "1") - vap.rmempty = true - if community_vap == "1" then - vap.default = "1" - end - end -end) - -for _, device in pairs(wired_nets) do - cbi_configure(device) - cbi_ip4addr(device) - cbi_dhcp(device) - cbi_dhcprange(device) - -- IPv6 addr and RA - if community_ipv6 == "1" then - if community_ipv6mode == "static" then - cbi_ip6addr(device) - end - cbi_ra(device) - end -end - --- General settings -g = m:section(TypedSection, "general", translate("General Settings")) -g.anonymous = true - -local cleanup = g:option(Flag, "cleanup", translate("Cleanup config"), - translate("If this is selected then config is cleaned before setting new config options.")) -cleanup.default = "1" - -local restrict = g:option(Flag, "local_restrict", translate("Protect LAN"), - translate("Check this to protect your LAN from other nodes or clients") .. " (" .. translate("recommended") .. ").") - -local share = g:option(Flag, "sharenet", translate("Share your internet connection"), - translate("Select this to allow others to use your connection to access the internet.")) - share.rmempty = true - --- IPv6 config -if community_ipv6 == "1" then - v6 = m:section(NamedSection, "ipv6", nil, translate("IPv6 Settings")) - local enabled = v6:option(Flag, "enabled", translate("Enabled"), - translate("Activate or deactivate IPv6 config globally.")) - enabled.default = meshkit_ipv6 - enabled.rmempty = false -end - -return m diff --git a/applications/luci-meshwizard/root/etc/uci-defaults/meshwizard b/applications/luci-meshwizard/root/etc/uci-defaults/meshwizard deleted file mode 100644 index 6ceb1b714..000000000 --- a/applications/luci-meshwizard/root/etc/uci-defaults/meshwizard +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/sh -uci batch <<EOF -set ucitrack.meshwizard="meshwizard" -set ucitrack.meshwizard.exec="/usr/bin/meshwizard/wizard.sh" -commit ucitrack -EOF - -rm -f /tmp/luci-indexcache |