diff options
Diffstat (limited to 'applications/luci-dump1090')
4 files changed, 192 insertions, 0 deletions
diff --git a/applications/luci-dump1090/Makefile b/applications/luci-dump1090/Makefile new file mode 100644 index 000000000..be4c0ea87 --- /dev/null +++ b/applications/luci-dump1090/Makefile @@ -0,0 +1,4 @@ +PO = dump1090 + +include ../../build/config.mk +include ../../build/module.mk diff --git a/applications/luci-dump1090/luasrc/controller/dump1090.lua b/applications/luci-dump1090/luasrc/controller/dump1090.lua new file mode 100644 index 000000000..c29c22fc6 --- /dev/null +++ b/applications/luci-dump1090/luasrc/controller/dump1090.lua @@ -0,0 +1,25 @@ +--[[ +LuCI - Lua Configuration Interface - dump1090 support + +Copyright 2014 Álvaro Fernández Rojas <noltari@gmail.com> + +Licensed under the Apache License, Version 2.0 (the "License"); +you may not use this file except in compliance with the License. +You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +$Id$ +]]-- + +module("luci.controller.dump1090", package.seeall) + +function index() + if not nixio.fs.access("/etc/config/dump1090") then + return + end + + local page = entry({"admin", "services", "dump1090"}, cbi("dump1090"), _("dump1090")) + page.dependent = true + +end diff --git a/applications/luci-dump1090/luasrc/model/cbi/dump1090.lua b/applications/luci-dump1090/luasrc/model/cbi/dump1090.lua new file mode 100644 index 000000000..d3efe0b06 --- /dev/null +++ b/applications/luci-dump1090/luasrc/model/cbi/dump1090.lua @@ -0,0 +1,151 @@ +--[[ +LuCI - Lua Configuration Interface - dump1090 support + +Copyright 2014 Álvaro Fernández Rojas <noltari@gmail.com> + +Licensed under the Apache License, Version 2.0 (the "License"); +you may not use this file except in compliance with the License. +You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +$Id$ +]]-- + +m = Map("dump1090", "dump1090", translate("dump1090 is a Mode S decoder specifically designed for RTLSDR devices, here you can configure the settings.")) + +s = m:section(TypedSection, "dump1090", "") +s.addremove = true +s.anonymous = false + +enable=s:option(Flag, "disabled", translate("Enabled")) +enable.enabled="0" +enable.disabled="1" +enable.default = "1" +respawn=s:option(Flag, "respawn", translate("Respawn")) +respawn.default = false + +device_index=s:option(Value, "device_index", translate("RTL device index")) +device_index.rmempty = true +device_index.datatype = "uinteger" + +gain=s:option(Value, "gain", translate("Gain (-10 for auto-gain)")) +gain.rmempty = true +gain.datatype = "integer" + +enable_agc=s:option(Flag, "enable_agc", translate("Enable automatic gain control")) +enable_agc.default = false + +freq=s:option(Value, "freq", translate("Frequency")) +freq.rmempty = true +freq.datatype = "uinteger" + +ifile=s:option(Value, "ifile", translate("Data file")) +ifile.rmempty = true +ifile.datatype = "file" + +raw=s:option(Flag, "raw", translate("Show only messages hex values")) +raw.default = false + +net=s:option(Flag, "net", translate("Enable networking")) + +modeac=s:option(Flag, "modeac", translate("Enable decoding of SSR Modes 3/A & 3/C")) +modeac.default = false + +net_beast=s:option(Flag, "net_beast", translate("TCP raw output in Beast binary format")) +net_beast.default = false + +net_only=s:option(Flag, "net_only", translate("Enable just networking, no RTL device or file used")) +net_only.default = false + +net_http_port=s:option(Value, "net_http_port", translate("HTTP server port")) +net_http_port.rmempty = true +net_http_port.datatype = "port" + +net_ri_port=s:option(Value, "net_ri_port", translate("TCP raw input listen port")) +net_ri_port.rmempty = true +net_ri_port.datatype = "port" + +net_ro_port=s:option(Value, "net_ro_port", translate("TCP raw output listen port")) +net_ro_port.rmempty = true +net_ro_port.datatype = "port" + +net_sbs_port=s:option(Value, "net_sbs_port", translate("TCP BaseStation output listen port")) +net_sbs_port.rmempty = true +net_sbs_port.datatype = "port" + +net_bi_port=s:option(Value, "net_bi_port", translate("TCP Beast input listen port")) +net_bi_port.rmempty = true +net_bi_port.datatype = "port" + +net_bo_port=s:option(Value, "net_bo_port", translate("TCP Beast output listen port")) +net_bo_port.rmempty = true +net_bo_port.datatype = "port" + +net_ro_size=s:option(Value, "net_ro_size", translate("TCP raw output minimum size")) +net_ro_size.rmempty = true +net_ro_size.datatype = "uinteger" + +net_ro_rate=s:option(Value, "net_ro_rate", translate("TCP raw output memory flush rate")) +net_ro_rate.rmempty = true +net_ro_rate.datatype = "uinteger" + +net_heartbeat=s:option(Value, "net_heartbeat", translate("TCP heartbeat rate in seconds")) +net_heartbeat.rmempty = true +net_heartbeat.datatype = "uinteger" + +net_buffer=s:option(Value, "net_buffer", translate("TCP buffer size 64Kb * (2^n)")) +net_buffer.rmempty = true +net_buffer.datatype = "uinteger" + +lat=s:option(Value, "lat", translate("Reference/receiver latitude for surface posn")) +lat.rmempty = true +lat.datatype = "integer" + +lon=s:option(Value, "lon", translate("Reference/receiver longitude for surface posn")) +lon.rmempty = true +lon.datatype = "integer" + +fix=s:option(Flag, "fix", translate("Enable single-bits error correction using CRC")) +fix.default = false + +no_fix=s:option(Flag, "no_fix", translate("Disable single-bits error correction using CRC")) +no_fix.default = false + +no_crc_check=s:option(Flag, "no_crc_check", translate("Disable messages with broken CRC")) +no_crc_check.default = false + +phase_enhance=s:option(Flag, "phase_enhance", translate("Enable phase enhancement")) +phase_enhance.default = false + +agressive=s:option(Flag, "agressive", translate("More CPU for more messages")) +agressive.default = false + +mlat=s:option(Flag, "mlat", translate("Display raw messages in Beast ascii mode")) +mlat.default = false + +stats=s:option(Flag, "stats", translate("Print stats at exit")) +stats.default = false + +stats_every=s:option(Value, "stats_every", translate("Show and reset stats every seconds")) +stats_every.rmempty = true +stats_every.datatype = "uinteger" + +onlyaddr=s:option(Flag, "onlyaddr", translate("Show only ICAO addresses")) +onlyaddr.default = false + +metric=s:option(Flag, "metric", translate("Use metric units")) +metric.default = false + +snip=s:option(Flag, "snip", translate("Strip IQ file removing samples")) +snip.rmempty = true +snip.datatype = "uinteger" + +debug_mode=s:option(Flag, "debug", translate("Debug mode flags")) +debug_mode.rmempty = true + +ppm=s:option(Flag, "ppm", translate("Set receiver error in parts per million")) +ppm.rmempty = true +ppm.datatype = "uinteger" + +return m diff --git a/applications/luci-dump1090/root/etc/uci-defaults/luci-dump1090 b/applications/luci-dump1090/root/etc/uci-defaults/luci-dump1090 new file mode 100644 index 000000000..4475d2fb9 --- /dev/null +++ b/applications/luci-dump1090/root/etc/uci-defaults/luci-dump1090 @@ -0,0 +1,12 @@ +#!/bin/sh + +# needed for "Save and Apply" to restart dump1090 +uci -q batch <<-EOF >/dev/null + delete ucitrack.@dump1090[-1] + add ucitrack dump1090 + set ucitrack.@dump1090[-1].init="dump1090" + commit ucitrack +EOF + +rm -f /tmp/luci-indexcache +exit 0 |