diff options
65 files changed, 965 insertions, 4019 deletions
diff --git a/applications/luci-app-firewall/luasrc/model/cbi/firewall/zones.lua b/applications/luci-app-firewall/luasrc/model/cbi/firewall/zones.lua index 500e5078f4..2c5083a019 100644 --- a/applications/luci-app-firewall/luasrc/model/cbi/firewall/zones.lua +++ b/applications/luci-app-firewall/luasrc/model/cbi/firewall/zones.lua @@ -3,6 +3,7 @@ local ds = require "luci.dispatcher" local fw = require "luci.model.firewall" +local fs = require "nixio.fs" local m, s, o, p, i, v @@ -32,6 +33,28 @@ for i, v in ipairs(p) do v:value("ACCEPT", translate("accept")) end +-- Netfilter flow offload support + +local offload = fs.access("/sys/module/xt_FLOWOFFLOAD/refcnt") + +if offload then + s:option(DummyValue, "offload_advice", + translate("Routing/NAT Offloading"), + translate("Experimental feature. Not fully compatible with QoS/SQM.")) + + o = s:option(Flag, "flow_offloading", + translate("Software flow offloading"), + translate("Software based offloading for routing/NAT")) + o.optional = true + + o = s:option(Flag, "flow_offloading_hw", + translate("Hardware flow offloading"), + translate("Requires hardware NAT support. Implemented at least for mt7621")) + o.optional = true + o:depends( "flow_offloading", 1) +end + +-- Firewall zones s = m:section(TypedSection, "zone", translate("Zones")) s.template = "cbi/tblsection" diff --git a/applications/luci-app-firewall/po/ca/firewall.po b/applications/luci-app-firewall/po/ca/firewall.po index ff43427eed..2ccffca9a7 100644 --- a/applications/luci-app-firewall/po/ca/firewall.po +++ b/applications/luci-app-firewall/po/ca/firewall.po @@ -130,6 +130,9 @@ msgstr "Habilita protecció contra la inundació SYN" msgid "Enable logging on this zone" msgstr "Habilita el registre d'aquesta zona" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Adreça IP extern" @@ -181,6 +184,9 @@ msgstr "Des de %s en %s amb orígens %s i %s" msgid "General Settings" msgstr "Ajusts generals" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -337,6 +343,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -365,6 +374,9 @@ msgstr "Reescriu a l'origen %s" msgid "Rewrite to source %s, %s" msgstr "Reescriu als orígens %s, %s" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -380,6 +392,12 @@ msgstr "Port SNAT" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "Adreça IP d'origen" diff --git a/applications/luci-app-firewall/po/cs/firewall.po b/applications/luci-app-firewall/po/cs/firewall.po index caa7e19988..4cbf356d0b 100644 --- a/applications/luci-app-firewall/po/cs/firewall.po +++ b/applications/luci-app-firewall/po/cs/firewall.po @@ -125,6 +125,9 @@ msgstr "Povolit ochranu proti SYN-flood" msgid "Enable logging on this zone" msgstr "Povolit logování v této oblasti" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Vnější IP adresa" @@ -176,6 +179,9 @@ msgstr "Z %s v %s se zdrojovou %s a %s" msgid "General Settings" msgstr "Obecné nastavení" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -334,6 +340,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -362,6 +371,9 @@ msgstr "Přepsat na zdrojovou %s" msgid "Rewrite to source %s, %s" msgstr "Přepsat na zdrojovou %s, %s" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -377,6 +389,12 @@ msgstr "Port SNATu" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "Zdrojová IP adresa" diff --git a/applications/luci-app-firewall/po/de/firewall.po b/applications/luci-app-firewall/po/de/firewall.po index fcf8bec679..0ee6007dd6 100644 --- a/applications/luci-app-firewall/po/de/firewall.po +++ b/applications/luci-app-firewall/po/de/firewall.po @@ -128,6 +128,9 @@ msgstr "Schutz vor SYN-flood-Attacken" msgid "Enable logging on this zone" msgstr "Protokollierung innerhalb der Zone aktivieren" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Externe IP-Adresse" @@ -179,6 +182,9 @@ msgstr "Von %s in %s mit Quell-%s und %s" msgid "General Settings" msgstr "Allgemein" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -334,6 +340,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -362,6 +371,9 @@ msgstr "Schreibe um auf Quell-%s" msgid "Rewrite to source %s, %s" msgstr "Schreibe um auf Quell-%s, %s" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -377,6 +389,12 @@ msgstr "SNAT-Port" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "Quell-IP-Adresse" diff --git a/applications/luci-app-firewall/po/el/firewall.po b/applications/luci-app-firewall/po/el/firewall.po index 598927557b..9ddd4c9db1 100644 --- a/applications/luci-app-firewall/po/el/firewall.po +++ b/applications/luci-app-firewall/po/el/firewall.po @@ -126,6 +126,9 @@ msgstr "Προστασία SYN-flood" msgid "Enable logging on this zone" msgstr "" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Εξωτερική διεύθυνση IP" @@ -177,6 +180,9 @@ msgstr "" msgid "General Settings" msgstr "Γενικές Ρυθμίσεις" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -327,6 +333,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -353,6 +362,9 @@ msgstr "" msgid "Rewrite to source %s, %s" msgstr "" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -368,6 +380,12 @@ msgstr "" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + #, fuzzy msgid "Source IP address" msgstr "Διεύθυνση MAC πηγής" diff --git a/applications/luci-app-firewall/po/en/firewall.po b/applications/luci-app-firewall/po/en/firewall.po index df1ed4a088..f0fe0b3782 100644 --- a/applications/luci-app-firewall/po/en/firewall.po +++ b/applications/luci-app-firewall/po/en/firewall.po @@ -122,6 +122,9 @@ msgstr "Enable SYN-flood protection" msgid "Enable logging on this zone" msgstr "" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "" @@ -177,6 +180,9 @@ msgstr "" msgid "General Settings" msgstr "" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -327,6 +333,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -353,6 +362,9 @@ msgstr "" msgid "Rewrite to source %s, %s" msgstr "" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -368,6 +380,12 @@ msgstr "" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # diff --git a/applications/luci-app-firewall/po/es/firewall.po b/applications/luci-app-firewall/po/es/firewall.po index bae8b693da..000853e9bd 100644 --- a/applications/luci-app-firewall/po/es/firewall.po +++ b/applications/luci-app-firewall/po/es/firewall.po @@ -129,6 +129,9 @@ msgstr "Activar protección a inundación-SYN" msgid "Enable logging on this zone" msgstr "Activar registro en esta zona" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Dirección IP externa" @@ -180,6 +183,9 @@ msgstr "Desde %s en %s con origen %s y %s" msgid "General Settings" msgstr "Configuración general" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -336,6 +342,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -364,6 +373,9 @@ msgstr "Reescribir a origen %s" msgid "Rewrite to source %s, %s" msgstr "Reescribir a origen %s, %s" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -379,6 +391,12 @@ msgstr "Puerto SNAT" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "Dirección IP origen" diff --git a/applications/luci-app-firewall/po/fr/firewall.po b/applications/luci-app-firewall/po/fr/firewall.po index 281999b550..74c28b8836 100644 --- a/applications/luci-app-firewall/po/fr/firewall.po +++ b/applications/luci-app-firewall/po/fr/firewall.po @@ -124,6 +124,9 @@ msgstr "Activer la protection contre le SYN-flood" msgid "Enable logging on this zone" msgstr "Activer les traces (logs) sur cette zone" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Adresse IP externe" @@ -179,6 +182,9 @@ msgstr "" msgid "General Settings" msgstr "Paramètres généraux" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -332,6 +338,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -362,6 +371,9 @@ msgstr "" msgid "Rewrite to source %s, %s" msgstr "" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -377,6 +389,12 @@ msgstr "Port SNAT" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # diff --git a/applications/luci-app-firewall/po/he/firewall.po b/applications/luci-app-firewall/po/he/firewall.po index 06952d4901..0416661c26 100644 --- a/applications/luci-app-firewall/po/he/firewall.po +++ b/applications/luci-app-firewall/po/he/firewall.po @@ -119,6 +119,9 @@ msgstr "" msgid "Enable logging on this zone" msgstr "" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "" @@ -170,6 +173,9 @@ msgstr "" msgid "General Settings" msgstr "" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -317,6 +323,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -343,6 +352,9 @@ msgstr "" msgid "Rewrite to source %s, %s" msgstr "" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -358,6 +370,12 @@ msgstr "" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "" diff --git a/applications/luci-app-firewall/po/hu/firewall.po b/applications/luci-app-firewall/po/hu/firewall.po index 29aa324187..33a305ce8e 100644 --- a/applications/luci-app-firewall/po/hu/firewall.po +++ b/applications/luci-app-firewall/po/hu/firewall.po @@ -126,6 +126,9 @@ msgstr "SYN-flood védelem engedélyezése" msgid "Enable logging on this zone" msgstr "Naplózás engeélyezése ezen a zónán" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Külső IP cím" @@ -177,6 +180,9 @@ msgstr "%s felől %s-ben %s és %s forrással" msgid "General Settings" msgstr "Általános beállítások" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -338,6 +344,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -366,6 +375,9 @@ msgstr "Átírás %s forrásra" msgid "Rewrite to source %s, %s" msgstr "Átírás %s, %s forrásra" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -381,6 +393,12 @@ msgstr "SNAT port" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "Forrás IP cím" diff --git a/applications/luci-app-firewall/po/it/firewall.po b/applications/luci-app-firewall/po/it/firewall.po index 43b90a9e9b..4808d12475 100644 --- a/applications/luci-app-firewall/po/it/firewall.po +++ b/applications/luci-app-firewall/po/it/firewall.po @@ -128,6 +128,9 @@ msgstr "Attiva protezione SYN-flood" msgid "Enable logging on this zone" msgstr "Attiva registro su questa zona" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Indirizzo IP Esterno" @@ -179,6 +182,9 @@ msgstr "Da %s a %s con sorgente %s e %s" msgid "General Settings" msgstr "Opzioni Generali" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -334,6 +340,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "Riavvia Firewall" @@ -362,6 +371,9 @@ msgstr "Riscrivi alla sorgente %s" msgid "Rewrite to source %s, %s" msgstr "Riscrivi alla sorgente %s, %s" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -377,6 +389,12 @@ msgstr "Porta SNAT" msgid "Saturday" msgstr "Sabato" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # diff --git a/applications/luci-app-firewall/po/ja/firewall.po b/applications/luci-app-firewall/po/ja/firewall.po index 2d252797ff..27109904ba 100644 --- a/applications/luci-app-firewall/po/ja/firewall.po +++ b/applications/luci-app-firewall/po/ja/firewall.po @@ -3,14 +3,14 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2010-03-30 17:00+0200\n" -"PO-Revision-Date: 2018-01-15 14:56+0900\n" +"PO-Revision-Date: 2018-05-27 21:24+0900\n" "Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n" "Language: ja\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Poedit 2.0.5\n" +"X-Generator: Poedit 2.0.7\n" "Language-Team: \n" msgid "%s in %s" @@ -129,6 +129,9 @@ msgstr "SYN-Floodプロテクションを有効にする" msgid "Enable logging on this zone" msgstr "このゾーンのログ記録を有効にする" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "実験的な機能です。 QoS/SQM との完全な互換性はありません。" + msgid "External IP address" msgstr "外部IPアドレス" @@ -180,6 +183,9 @@ msgstr "送信元 %s (%s) , 送信元 %s, 送信元 %s" msgid "General Settings" msgstr "一般設定" +msgid "Hardware flow offloading" +msgstr "ハードウェア フローオフロード" + msgid "IP" msgstr "IP" @@ -343,6 +349,10 @@ msgstr "転送を拒否" msgid "Refuse input" msgstr "入力を拒否" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" +"ハードウェア NAT サポートが必要です。 mt7621 のみにおいて実装されています。" + msgid "Restart Firewall" msgstr "ファイアウォールの再起動" @@ -372,6 +382,9 @@ msgstr "送信元 %s にリライト" msgid "Rewrite to source %s, %s" msgstr "送信元 %s, %s にリライト" +msgid "Routing/NAT Offloading" +msgstr "ルーティング/NAT オフロード" + msgid "Rule is disabled" msgstr "ルールは無効です" @@ -387,6 +400,12 @@ msgstr "SNAT ポート" msgid "Saturday" msgstr "土曜日" +msgid "Software based offloading for routing/NAT" +msgstr "ルーティング/NAT のための、ソフトウェアベースのオフロードです。" + +msgid "Software flow offloading" +msgstr "ソフトウェア フローオフロード" + # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # diff --git a/applications/luci-app-firewall/po/ko/firewall.po b/applications/luci-app-firewall/po/ko/firewall.po index bfe94d04a8..dd4f96197a 100644 --- a/applications/luci-app-firewall/po/ko/firewall.po +++ b/applications/luci-app-firewall/po/ko/firewall.po @@ -127,6 +127,9 @@ msgstr "SYN-flood protection 활성화" msgid "Enable logging on this zone" msgstr "zone 의 logging 활성화" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "외부 IP 주소" @@ -178,6 +181,9 @@ msgstr "" msgid "General Settings" msgstr "" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -327,6 +333,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -353,6 +362,9 @@ msgstr "" msgid "Rewrite to source %s, %s" msgstr "" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -368,6 +380,12 @@ msgstr "" msgid "Saturday" msgstr "토요일" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "Source IP 주소" diff --git a/applications/luci-app-firewall/po/ms/firewall.po b/applications/luci-app-firewall/po/ms/firewall.po index c6ab19791e..58aea1fd0b 100644 --- a/applications/luci-app-firewall/po/ms/firewall.po +++ b/applications/luci-app-firewall/po/ms/firewall.po @@ -118,6 +118,9 @@ msgstr "" msgid "Enable logging on this zone" msgstr "" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "" @@ -169,6 +172,9 @@ msgstr "" msgid "General Settings" msgstr "" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -316,6 +322,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -342,6 +351,9 @@ msgstr "" msgid "Rewrite to source %s, %s" msgstr "" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -357,6 +369,12 @@ msgstr "" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "" diff --git a/applications/luci-app-firewall/po/no/firewall.po b/applications/luci-app-firewall/po/no/firewall.po index e9ecb2b63c..2a13b6b3cd 100644 --- a/applications/luci-app-firewall/po/no/firewall.po +++ b/applications/luci-app-firewall/po/no/firewall.po @@ -122,6 +122,9 @@ msgstr "Aktiver SYN-flood beskyttelse" msgid "Enable logging on this zone" msgstr "Aktiver logging av denne sonen" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Ekstern IP adressse" @@ -174,6 +177,9 @@ msgstr "Fra %s i %s med kilde %s og %s" msgid "General Settings" msgstr "Generelle Innstillinger" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -333,6 +339,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -361,6 +370,9 @@ msgstr "Omskriv til kilde %s" msgid "Rewrite to source %s, %s" msgstr "Omskriv til kilde %s, %s" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -376,6 +388,12 @@ msgstr "SNAT port" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "Kilde IP adresse" diff --git a/applications/luci-app-firewall/po/pl/firewall.po b/applications/luci-app-firewall/po/pl/firewall.po index fe48060237..a08a1e5606 100644 --- a/applications/luci-app-firewall/po/pl/firewall.po +++ b/applications/luci-app-firewall/po/pl/firewall.po @@ -129,6 +129,9 @@ msgstr "Włącz ochronę przed atakiem SYN-flood" msgid "Enable logging on this zone" msgstr "Włącz logowanie na tej strefy" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Zewnętrzne adresy IP" @@ -183,6 +186,9 @@ msgstr "Z %s w %s ze źródłem %s i %s" msgid "General Settings" msgstr "Ustawienia ogólne" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -342,6 +348,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -374,6 +383,9 @@ msgstr "Przepisz do źródła %s" msgid "Rewrite to source %s, %s" msgstr "Przepisz do źródła %s, %s" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -389,6 +401,12 @@ msgstr "Port SNAT" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "Źródłowy adres IP" diff --git a/applications/luci-app-firewall/po/pt-br/firewall.po b/applications/luci-app-firewall/po/pt-br/firewall.po index b49adccdda..7da028bee4 100644 --- a/applications/luci-app-firewall/po/pt-br/firewall.po +++ b/applications/luci-app-firewall/po/pt-br/firewall.po @@ -127,6 +127,9 @@ msgstr "Habilite proteção contra SYN-flood" msgid "Enable logging on this zone" msgstr "Habilite o registro nesta zona" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Endereço IP externo" @@ -178,6 +181,9 @@ msgstr "Vindo de %s em %s com origem %s e %s" msgid "General Settings" msgstr "Configurações Gerais" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -337,6 +343,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "Reiniciar o Firewall" @@ -365,6 +374,9 @@ msgstr "Reescrever para a origem %s" msgid "Rewrite to source %s, %s" msgstr "Reescrever para a origem %s, %s" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -380,6 +392,12 @@ msgstr "Porta da SNAT" msgid "Saturday" msgstr "Sábado" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "Endereço IP de origem" diff --git a/applications/luci-app-firewall/po/pt/firewall.po b/applications/luci-app-firewall/po/pt/firewall.po index 29a7c7c2c7..543489e1ad 100644 --- a/applications/luci-app-firewall/po/pt/firewall.po +++ b/applications/luci-app-firewall/po/pt/firewall.po @@ -128,6 +128,9 @@ msgstr "Ativar a Proteção SYN-flood" msgid "Enable logging on this zone" msgstr "Ativar registo nesta zona" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Endereço IP externo" @@ -179,6 +182,9 @@ msgstr "De %s em %s com origem %s e %s" msgid "General Settings" msgstr "Definições Gerais" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -339,6 +345,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -365,6 +374,9 @@ msgstr "Re-escrever para a origem %s" msgid "Rewrite to source %s, %s" msgstr "Re-escrever para a origem %s, %s" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -380,6 +392,12 @@ msgstr "Porta SNAT" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "Endereço IP de origem" diff --git a/applications/luci-app-firewall/po/ro/firewall.po b/applications/luci-app-firewall/po/ro/firewall.po index cc4d7a62af..937efe722b 100644 --- a/applications/luci-app-firewall/po/ro/firewall.po +++ b/applications/luci-app-firewall/po/ro/firewall.po @@ -123,6 +123,9 @@ msgstr "Activează protecţia SYN-flood" msgid "Enable logging on this zone" msgstr "Activeaza log in aceasta zona" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Adresă IP externă" @@ -174,6 +177,9 @@ msgstr "" msgid "General Settings" msgstr "Setari generale" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -321,6 +327,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -347,6 +356,9 @@ msgstr "" msgid "Rewrite to source %s, %s" msgstr "" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -362,6 +374,12 @@ msgstr "" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "Sursă adresă IP" diff --git a/applications/luci-app-firewall/po/ru/firewall.po b/applications/luci-app-firewall/po/ru/firewall.po index b8611af780..528756d7e3 100644 --- a/applications/luci-app-firewall/po/ru/firewall.po +++ b/applications/luci-app-firewall/po/ru/firewall.po @@ -130,6 +130,9 @@ msgstr "Включить защиту<br />от SYN-flood атак" msgid "Enable logging on this zone" msgstr "Включить журналирование в этой зоне" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Внешний IP-адрес" @@ -181,6 +184,9 @@ msgstr "Из %s в %s с источниками %s и %s" msgid "General Settings" msgstr "Основные настройки" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "IP-адрес" @@ -346,6 +352,9 @@ msgstr "Сбрасывать перенаправление" msgid "Refuse input" msgstr "Сбрасывать входящий трафик" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "Перезапустить межсетевой экран" @@ -374,6 +383,9 @@ msgstr "Перенаправлять к источнику %s" msgid "Rewrite to source %s, %s" msgstr "Перенаправлять к источнику %s, %s" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "Правило отключено" @@ -389,6 +401,12 @@ msgstr "Порт SNAT" msgid "Saturday" msgstr "Суббота" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "IP-адрес источника" diff --git a/applications/luci-app-firewall/po/sk/firewall.po b/applications/luci-app-firewall/po/sk/firewall.po index a185625a02..a382bde7db 100644 --- a/applications/luci-app-firewall/po/sk/firewall.po +++ b/applications/luci-app-firewall/po/sk/firewall.po @@ -119,6 +119,9 @@ msgstr "" msgid "Enable logging on this zone" msgstr "" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "" @@ -170,6 +173,9 @@ msgstr "" msgid "General Settings" msgstr "" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -317,6 +323,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -343,6 +352,9 @@ msgstr "" msgid "Rewrite to source %s, %s" msgstr "" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -358,6 +370,12 @@ msgstr "" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "" diff --git a/applications/luci-app-firewall/po/sv/firewall.po b/applications/luci-app-firewall/po/sv/firewall.po index c98eafa09a..d5f6a2d8a5 100644 --- a/applications/luci-app-firewall/po/sv/firewall.po +++ b/applications/luci-app-firewall/po/sv/firewall.po @@ -120,6 +120,9 @@ msgstr "" msgid "Enable logging on this zone" msgstr "Aktivera loggning i den här zonen" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Extern IP-adress" @@ -171,6 +174,9 @@ msgstr "Från %s i %s med källa %s och %s" msgid "General Settings" msgstr "Generella inställningar" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -323,6 +329,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "Starta om brandvägg" @@ -349,6 +358,9 @@ msgstr "Skriv om igen till källan %s" msgid "Rewrite to source %s, %s" msgstr "" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -364,6 +376,12 @@ msgstr "SNAT-port" msgid "Saturday" msgstr "Lördag" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "IP-adress för källa" diff --git a/applications/luci-app-firewall/po/templates/firewall.pot b/applications/luci-app-firewall/po/templates/firewall.pot index 62c4a2e84a..6ff4c3ca0f 100644 --- a/applications/luci-app-firewall/po/templates/firewall.pot +++ b/applications/luci-app-firewall/po/templates/firewall.pot @@ -112,6 +112,9 @@ msgstr "" msgid "Enable logging on this zone" msgstr "" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "" @@ -163,6 +166,9 @@ msgstr "" msgid "General Settings" msgstr "" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -310,6 +316,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -336,6 +345,9 @@ msgstr "" msgid "Rewrite to source %s, %s" msgstr "" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -351,6 +363,12 @@ msgstr "" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "" diff --git a/applications/luci-app-firewall/po/tr/firewall.po b/applications/luci-app-firewall/po/tr/firewall.po index f23d10aafc..1dd1e6f9cf 100644 --- a/applications/luci-app-firewall/po/tr/firewall.po +++ b/applications/luci-app-firewall/po/tr/firewall.po @@ -119,6 +119,9 @@ msgstr "" msgid "Enable logging on this zone" msgstr "" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "" @@ -170,6 +173,9 @@ msgstr "" msgid "General Settings" msgstr "" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -317,6 +323,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -343,6 +352,9 @@ msgstr "" msgid "Rewrite to source %s, %s" msgstr "" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -358,6 +370,12 @@ msgstr "" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "" diff --git a/applications/luci-app-firewall/po/uk/firewall.po b/applications/luci-app-firewall/po/uk/firewall.po index de72ec6e0a..86ff65edf1 100644 --- a/applications/luci-app-firewall/po/uk/firewall.po +++ b/applications/luci-app-firewall/po/uk/firewall.po @@ -127,6 +127,9 @@ msgstr "Увімкнути захист від SYN-flood" msgid "Enable logging on this zone" msgstr "Увімкнути реєстрування у цій зоні" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "Зовнішня IP-адреса" @@ -178,6 +181,9 @@ msgstr "%s у %s з вихідним %s та %s" msgid "General Settings" msgstr "Загальні настройки" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -337,6 +343,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -365,6 +374,9 @@ msgstr "перезапис на вихідний %s" msgid "Rewrite to source %s, %s" msgstr "перезапис на вихідний %s, %s" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -380,6 +392,12 @@ msgstr "Порт SNAT" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "IP-адреса джерела" diff --git a/applications/luci-app-firewall/po/vi/firewall.po b/applications/luci-app-firewall/po/vi/firewall.po index 24452ff1c0..bd33afcd09 100644 --- a/applications/luci-app-firewall/po/vi/firewall.po +++ b/applications/luci-app-firewall/po/vi/firewall.po @@ -126,6 +126,9 @@ msgstr "SYN-flood bảo vệ " msgid "Enable logging on this zone" msgstr "" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "" @@ -177,6 +180,9 @@ msgstr "" msgid "General Settings" msgstr "" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -327,6 +333,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "" @@ -353,6 +362,9 @@ msgstr "" msgid "Rewrite to source %s, %s" msgstr "" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -368,6 +380,12 @@ msgstr "" msgid "Saturday" msgstr "" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + #, fuzzy msgid "Source IP address" msgstr "Đỉa chỉ MAC nguồn" diff --git a/applications/luci-app-firewall/po/zh-cn/firewall.po b/applications/luci-app-firewall/po/zh-cn/firewall.po index 9e9c64d670..8816f70f47 100644 --- a/applications/luci-app-firewall/po/zh-cn/firewall.po +++ b/applications/luci-app-firewall/po/zh-cn/firewall.po @@ -124,6 +124,9 @@ msgstr "启用 SYN-flood 防御" msgid "Enable logging on this zone" msgstr "启用此区域的日志记录" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "外部 IP 地址" @@ -175,6 +178,9 @@ msgstr "来自 %s 位于 %s 源端口 %s 源 MAC %s" msgid "General Settings" msgstr "基本设置" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "IP" @@ -323,6 +329,9 @@ msgstr "拒绝转发" msgid "Refuse input" msgstr "拒绝入站" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "重启防火墙" @@ -349,6 +358,9 @@ msgstr "源地址改写成 %s" msgid "Rewrite to source %s, %s" msgstr "源地址改写成 %s, %s" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "规则已禁用" @@ -364,6 +376,12 @@ msgstr "SNAT 端口" msgid "Saturday" msgstr "星期六" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "源 IP 地址" diff --git a/applications/luci-app-firewall/po/zh-tw/firewall.po b/applications/luci-app-firewall/po/zh-tw/firewall.po index afc9c4e33c..1fbe970ddb 100644 --- a/applications/luci-app-firewall/po/zh-tw/firewall.po +++ b/applications/luci-app-firewall/po/zh-tw/firewall.po @@ -124,6 +124,9 @@ msgstr "啟用 SYN-flood 防禦" msgid "Enable logging on this zone" msgstr "啟用此區域的日誌記錄" +msgid "Experimental feature. Not fully compatible with QoS/SQM." +msgstr "" + msgid "External IP address" msgstr "外部 IP 位址" @@ -175,6 +178,9 @@ msgstr "來自 %s 位於 %s 源埠 %s 源 MAC %s" msgid "General Settings" msgstr "基本設定" +msgid "Hardware flow offloading" +msgstr "" + msgid "IP" msgstr "" @@ -322,6 +328,9 @@ msgstr "" msgid "Refuse input" msgstr "" +msgid "Requires hardware NAT support. Implemented at least for mt7621" +msgstr "" + msgid "Restart Firewall" msgstr "重啟防火牆" @@ -348,6 +357,9 @@ msgstr "源位址改寫成 %s" msgid "Rewrite to source %s, %s" msgstr "源位址改寫成 %s, %s" +msgid "Routing/NAT Offloading" +msgstr "" + msgid "Rule is disabled" msgstr "" @@ -363,6 +375,12 @@ msgstr "SNAT 埠" msgid "Saturday" msgstr "星期六" +msgid "Software based offloading for routing/NAT" +msgstr "" + +msgid "Software flow offloading" +msgstr "" + msgid "Source IP address" msgstr "源 IP 位址" diff --git a/applications/luci-app-lxc/Makefile b/applications/luci-app-lxc/Makefile index 85cae5c405..379cccbfc9 100644 --- a/applications/luci-app-lxc/Makefile +++ b/applications/luci-app-lxc/Makefile @@ -7,7 +7,7 @@ include $(TOPDIR)/rules.mk LUCI_TITLE:=LXC management Web UI -LUCI_DEPENDS:=+luci-mod-admin-full +lxc +lxc-attach +lxc-console +lxc-create +liblxc +rpcd-mod-lxc +getopt +LUCI_DEPENDS:=+luci-mod-admin-full +lxc +lxc-attach +lxc-console +lxc-create +liblxc +rpcd-mod-lxc +getopt +!LXC_BUSYBOX_OPTIONS:tar LUCI_PKGARCH:=all PKG_MAINTAINER:=Petar Koretic <petar.koretic@sartura.hr> diff --git a/applications/luci-app-lxc/luasrc/controller/lxc.lua b/applications/luci-app-lxc/luasrc/controller/lxc.lua index cc490f0b81..f14606ee81 100644 --- a/applications/luci-app-lxc/luasrc/controller/lxc.lua +++ b/applications/luci-app-lxc/luasrc/controller/lxc.lua @@ -14,74 +14,43 @@ Author: Petar Koretic <petar.koretic@sartura.hr> ]]-- -local uci = require "luci.model.uci" -local util = require "luci.util" -local nixio = require "nixio" - module("luci.controller.lxc", package.seeall) -function fork_exec(command) - local pid = nixio.fork() - if pid > 0 then - return - elseif pid == 0 then - -- change to root dir - nixio.chdir("/") - - -- patch stdin, out, err to /dev/null - local null = nixio.open("/dev/null", "w+") - if null then - nixio.dup(null, nixio.stderr) - nixio.dup(null, nixio.stdout) - nixio.dup(null, nixio.stdin) - if null:fileno() > 2 then - null:close() - end - end +local uci = require "luci.model.uci".cursor() +local util = require "luci.util" +local fs = require "nixio" - -- replace with target command - nixio.exec("/bin/sh", "-c", command) +function index() + if not nixio.fs.access("/etc/config/lxc") then + return end -end -function index() page = node("admin", "services", "lxc") page.target = cbi("lxc") page.title = _("LXC Containers") page.order = 70 - page = entry({"admin", "services", "lxc_create"}, call("lxc_create"), nil) - page.leaf = true - - page = entry({"admin", "services", "lxc_action"}, call("lxc_action"), nil) - page.leaf = true - - page = entry({"admin", "services", "lxc_get_downloadable"}, call("lxc_get_downloadable"), nil) - page.leaf = true - - page = entry({"admin", "services", "lxc_configuration_get"}, call("lxc_configuration_get"), nil) - page.leaf = true - - page = entry({"admin", "services", "lxc_configuration_set"}, call("lxc_configuration_set"), nil) - page.leaf = true - + entry({"admin", "services", "lxc_create"}, call("lxc_create"), nil).leaf = true + entry({"admin", "services", "lxc_action"}, call("lxc_action"), nil).leaf = true + entry({"admin", "services", "lxc_get_downloadable"}, call("lxc_get_downloadable"), nil).leaf = true + entry({"admin", "services", "lxc_configuration_get"}, call("lxc_configuration_get"), nil).leaf = true + entry({"admin", "services", "lxc_configuration_set"}, call("lxc_configuration_set"), nil).leaf = true end function lxc_get_downloadable() local target = lxc_get_arch_target() local templates = {} + local ssl_status = lxc_get_ssl_status() - local f = io.popen('sh /usr/share/lxc/templates/lxc-download --list --no-validate --server %s' - % util.shellquote(uci.cursor():get("lxc", "lxc", "url")), 'r') - + local f = io.popen('sh /usr/share/lxc/templates/lxc-download --list %s --server %s 2>/dev/null' + %{ ssl_status, util.shellquote(uci:get("lxc", "lxc", "url")) }, 'r') local line for line in f:lines() do local dist, version, dist_target = line:match("^(%S+)%s+(%S+)%s+(%S+)%s+default%s+%S+$") - if dist and version and dist_target == target then + if dist and version and dist_target and dist_target == target then templates[#templates+1] = "%s:%s" %{ dist, version } end end - f:close() luci.http.prepare_content("application/json") @@ -91,23 +60,26 @@ end function lxc_create(lxc_name, lxc_template) luci.http.prepare_content("text/plain") - if not pcall(dofile, "/etc/openwrt_release") then - return luci.http.write("1") + local check = lxc_get_config_path() + if not check then + return end - local lxc_dist, lxc_release = lxc_template:match("^(.+):(.+)$") + local ssl_status = lxc_get_ssl_status() + local src_err + local lxc_dist, lxc_release = lxc_template:match("^(.+):(.+)$") luci.http.write(util.ubus("lxc", "create", { name = lxc_name, template = "download", args = { - "--server", uci.cursor():get("lxc", "lxc", "url"), - "--no-validate", + "--server", uci:get("lxc", "lxc", "url"), "--dist", lxc_dist, "--release", lxc_release, - "--arch", lxc_get_arch_target() + "--arch", lxc_get_arch_target(), + ssl_status } - })) + }), src_err) end function lxc_action(lxc_action, lxc_name) @@ -121,11 +93,28 @@ function lxc_get_config_path() local f = io.open("/etc/lxc/lxc.conf", "r") local content = f:read("*all") f:close() + local ret = content:match('^%s*lxc.lxcpath%s*=%s*([^%s]*)') if ret then - return ret .. "/" + if nixio.fs.access(ret) then + local min_space = tonumber(uci:get("lxc", "lxc", "min_space")) or 100000 + local free_space = tonumber(util.exec("df " ..ret.. " | awk '{if(NR==2)print $4}'")) + if free_space and free_space >= min_space then + local min_temp = tonumber(uci:get("lxc", "lxc", "min_temp")) or 100000 + local free_temp = tonumber(util.exec("df /tmp | awk '{if(NR==2)print $4}'")) + if free_temp and free_temp >= min_temp then + return ret .. "/" + else + util.perror("lxc error: not enough temporary space (< " ..min_temp.. " KB)") + end + else + util.perror("lxc error: not enough space (< " ..min_space.. " KB)") + end + else + util.perror("lxc error: directory not found") + end else - return "/srv/lxc/" + util.perror("lxc error: config path is empty") end end @@ -143,14 +132,15 @@ function lxc_configuration_set(lxc_name) luci.http.prepare_content("text/plain") local lxc_configuration = luci.http.formvalue("lxc_configuration") - if lxc_configuration == nil then - return luci.http.write("1") + util.perror("lxc error: config formvalue is empty") + return end local f, err = io.open(lxc_get_config_path() .. lxc_name .. "/config","w+") if not f then - return luci.http.write("2") + util.perror("lxc error: config file not found") + return end f:write(lxc_configuration) @@ -160,7 +150,7 @@ function lxc_configuration_set(lxc_name) end function lxc_get_arch_target() - local target = nixio.uname().machine + local target = fs.uname().machine local target_map = { armv5 = "armel", armv6 = "armel", @@ -168,13 +158,21 @@ function lxc_get_arch_target() armv8 = "arm64", x86_64 = "amd64" } - local k, v for k, v in pairs(target_map) do - if target:find(k) then + if target:find("^" ..k.. "$") then return v end end - return target end + +function lxc_get_ssl_status() + local ssl_enabled = uci:get("lxc", "lxc", "ssl_enabled") + local ssl_status = "--no-validate" + + if ssl_enabled and ssl_enabled == "1" then + ssl_status = "" + end + return ssl_status +end diff --git a/applications/luci-app-lxc/luasrc/model/cbi/lxc.lua b/applications/luci-app-lxc/luasrc/model/cbi/lxc.lua index ac0fdff332..8a8fc2be0d 100644 --- a/applications/luci-app-lxc/luasrc/model/cbi/lxc.lua +++ b/applications/luci-app-lxc/luasrc/model/cbi/lxc.lua @@ -14,18 +14,35 @@ Author: Petar Koretic <petar.koretic@sartura.hr> ]]-- -local fs = require "nixio.fs" - -m = Map("lxc", translate("LXC Containers")) - -if fs.access("/etc/config/lxc") then - m:section(SimpleSection).template = "lxc" - - s = m:section(TypedSection, "lxc", translate("Options")) - s.anonymous = true - s.addremove = false - - s:option(Value, "url", translate("Containers URL")) -end +m = Map("lxc", translate("LXC Containers"), + translate("<b>Please note:</b> For LXC Containers you need a custom OpenWrt image.<br />") + .. translate("The image should include at least support for 'kernel cgroups', 'kernel namespaces' and 'miscellaneous LXC related options'.")) +m:section(SimpleSection).template = "lxc" + +s = m:section(TypedSection, "lxc", translate("Options")) +s.anonymous = true + +o1 = s:option(Value, "url", translate("Containers URL")) +o1:value("images.linuxcontainers.org") +o1:value("repo.turris.cz/lxc", "repo.turris.cz/lxc (SSL req.)") +o1.default = "images.linuxcontainers.org" +o1.rmempty = false + +o2 = s:option(Flag, "ssl_enabled", translate("Enable SSL"), + translate("Enable optional SSL encryption support. This requires additional packages like 'wget', 'ca-certificates', 'gnupg' and 'gnupg-utils'.")) +o2.default = o2.disabled +o2.rmempty = false + +o3 = s:option(Value, "min_space", translate("Free Space Threshold"), + translate("Minimum required free space for LXC Container creation in KB")) +o3.default = "100000" +o3.datatype = "min(50000)" +o3.rmempty = false + +o4 = s:option(Value, "min_temp", translate("Free Temp Threshold"), + translate("Minimum required free temp space for LXC Container creation in KB")) +o4.default = "100000" +o4.datatype = "min(50000)" +o4.rmempty = false return m diff --git a/applications/luci-app-lxc/luasrc/view/lxc.htm b/applications/luci-app-lxc/luasrc/view/lxc.htm index edfff8e063..e02c3a7888 100644 --- a/applications/luci-app-lxc/luasrc/view/lxc.htm +++ b/applications/luci-app-lxc/luasrc/view/lxc.htm @@ -14,6 +14,32 @@ Author: Petar Koretic <petar.koretic@sartura.hr> -%> +<% +local fs = require "nixio" +local target = fs.uname().machine +%> + +<style type="text/css"> +table.cbi-section-table th, +table.cbi-section-table td, +.cbi-section-table-cell, +.cbi-input-select, +.cbi-input-text +{ + text-align:left; + vertical-align:top; + padding-left:2px; + margin-right:auto; + margin-left:0px; +} + +.cbi-input-select, +.cbi-input-text +{ + width:15em; +} +</style> + <fieldset class="cbi-section"> <legend><%:Available Containers%></legend> <div class="cbi-section-node"> @@ -43,7 +69,7 @@ Author: Petar Koretic <petar.koretic@sartura.hr> </tr> <tr id="tr_holder"> <td> - <input type="text" id="tx_name" placeholder="<%:Enter new name%>" value='' /> + <input class="cbi-input-text" type="text" id="tx_name" placeholder="<%:Enter new name%>" value='' /> </td> <td> <select id="s_template" class="cbi-input-select cbi-button"> @@ -65,23 +91,25 @@ Author: Petar Koretic <petar.koretic@sartura.hr> <hr/> <script type="text/javascript" src="<%=resource%>/cbi.js"></script> -<script type="text/javascript">//<![CDATA[ - - window.img = { "red" : "<%=resource%>/cbi/red.gif", "green" : "<%=resource%>/cbi/green.gif", "purple" : "<%=resource%>/cbi/purple.gif" } - window.states = { "STOPPED" : "red", "RUNNING" : "green", "FROZEN" : "purple"} +<script type="text/javascript"> +//<![CDATA[ + window.img = { "red" : "<%=resource%>/cbi/red.gif", "green" : "<%=resource%>/cbi/green.gif", "purple" : "<%=resource%>/cbi/purple.gif" } + window.states = { "STOPPED" : "red", "RUNNING" : "green", "FROZEN" : "purple" } - var t_lxc_list = document.getElementById('t_lxc_list'); - var loader_html = '<img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" width="16" height="16" style="vertical-align:middle" /> '; + var t_lxc_list = document.getElementById('t_lxc_list'); + var loader_html = '<img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" width="16" height="16" style="vertical-align:middle" />'; var timeout_msg = 0 var output_list = document.getElementById("lxc-list-output") - var output_add = document.getElementById("lxc-add-output") - var loader_add = document.getElementById("lxc-add-loader") + var output_add = document.getElementById("lxc-add-output") + var loader_add = document.getElementById("lxc-add-loader") + + info_message(output_add, "Template download in progress, please be patient!", 10000) function lxc_create(tr) { - var lxc_name = tr.querySelector("#tx_name").value.trim() + var lxc_name = tr.querySelector("#tx_name").value.replace(/[\s!@#$%^&*()+=\[\]{};':"\\|,<>\/?]/g,'') var lxc_template = tr.querySelector("#s_template").value - var bt_create = tr.querySelector("#bt_create") + var bt_create = tr.querySelector("#bt_create") if (t_lxc_list.querySelector("[data-id='" + lxc_name + "']") != null) return info_message(output_add, "Container with that name already exists!", 4000) @@ -92,7 +120,13 @@ Author: Petar Koretic <petar.koretic@sartura.hr> if (!lxc_name || !lxc_name.length) { bt_create.disabled = false - return info_message(output_add, "Name cannot be empty!", 4000) + return info_message(output_add, "The 'Name' field must not be empty!", 4000) + } + + if (!lxc_template) + { + bt_create.disabled = false + return info_message(output_add, "The 'Template' field must not be empty!", 4000) } loading(loader_add) @@ -101,6 +135,7 @@ Author: Petar Koretic <petar.koretic@sartura.hr> function(x) { bt_create.disabled = false + loading(loader_add, 0) if (!x) @@ -116,16 +151,16 @@ Author: Petar Koretic <petar.koretic@sartura.hr> var actions = '' actions += '<input type="button" onclick="action_handler(this)" data-action="start" value="<%:Start%>" class="cbi-button cbi-button-apply" />' - actions+= '<input type="button" onclick="action_handler(this)" data-action="stop" value="<%:Stop%>" class="cbi-button cbi-button-reset" />' - actions+= '<input type="button" onclick="action_handler(this)" data-action="destroy" value="<%:Delete%>" class="cbi-button cbi-button-remove" />' - actions+= ' <select class="cbi-input-select cbi-button" onchange="action_more_handler(this)">\ - <option selected disabled>more</option>\ + actions += ' <input type="button" onclick="action_handler(this)" data-action="stop" value="<%:Stop%>" class="cbi-button cbi-button-reset" />' + actions += ' <input type="button" onclick="action_handler(this)" data-action="destroy" value="<%:Delete%>" class="cbi-button cbi-button-remove" />' + actions += ' <select class="cbi-input-select cbi-button" onchange="action_more_handler(this)">\ + <option selected="selected" disabled="disabled">more</option>\ <option>configure</option>\ <option>freeze</option>\ <option>unfreeze</option>\ <option>reboot</option>\ </select>' - actions+= '<span data-loader style="display:inline-block; width:16px; height:16px; margin:0 5px"></span>' + actions += '<span data-loader="" style="display:inline-block; width:16px; height:16px; margin:0 5px"></span>' var row = t_lxc_list.insertRow(-1) var cell = row.insertCell(-1) @@ -144,12 +179,11 @@ Author: Petar Koretic <petar.koretic@sartura.hr> function action_handler(self) { - var action = self.getAttribute("data-action"); - - var bt_action = self - var lxc_name = self.parentNode.parentNode.children[0].getAttribute('data-id') + var action = self.getAttribute("data-action"); + var bt_action = self + var lxc_name = self.parentNode.parentNode.children[0].getAttribute('data-id') var status_img = self.parentNode.parentNode.querySelector('img') - var loader = self.parentNode.querySelector('[data-loader]') + var loader = self.parentNode.querySelector('[data-loader]') bt_action.disabled = true @@ -181,18 +215,24 @@ Author: Petar Koretic <petar.koretic@sartura.hr> loading(loader, 0) bt_action.disabled = false - //FIXME: uncomment after fixing 'lxc-start' if (!x /*|| ec */) return info_message(output_list,"Action failed!") - //FIXME: uncomment after fixing 'lxc-start' - //set_status(status_img, "green") + set_status(status_img, "green") }); } else if (action == "destroy") { - if (!confirm("This will completely remove LXC container from the disk. Are you sure? (container will be stopped if running)")) + var tr = self.parentNode.parentNode + var img = tr.querySelector('img') + if (img.getAttribute('src') != window.img["red"]) + { + bt_action.disabled = false + return info_message(output_list,"Container is still running!") + } + + if (!confirm("This will completely remove a stopped LXC container from disk. Are you sure?")) return loading(loader) @@ -253,13 +293,12 @@ Author: Petar Koretic <petar.koretic@sartura.hr> function action_more_handler(self) { var lxc_name = self.parentNode.parentNode.querySelector('[data-id]').getAttribute('data-id') - var loader = self.parentNode.parentNode.querySelector('[data-loader]') - - var option = self.options[self.selectedIndex].text + var loader = self.parentNode.parentNode.querySelector('[data-loader]') + var option = self.options[self.selectedIndex].text self.value = "more" - switch (option) + switch(option) { case "configure": var tr = document.createElement('tr') @@ -352,10 +391,22 @@ Author: Petar Koretic <petar.koretic@sartura.hr> var row = t_lxc_list.insertRow(-1); row.id = 'empty' var cell = row.insertCell(0); - cell.colSpan = 4; + cell.colSpan = 3; cell.innerHTML = '<em><br />There are no containers available yet.</em>'; } + function set_empty_template() + { + var row_count = t_lxc_create.rows.length; + while(--row_count) t_lxc_create.deleteRow(row_count); + + var row = t_lxc_create.insertRow(-1); + row.id = 'tr_holder' + var cell = row.insertCell(0); + cell.colSpan = 3; + cell.innerHTML = '<em><br />There are no templates for your architecture (<%=target%>) available, please select another containers URL.</em>'; + } + function lxc_list_update() { XHR.poll(4, '<%=luci.dispatcher.build_url("admin", "services")%>/lxc_action/list', null, @@ -363,8 +414,11 @@ Author: Petar Koretic <petar.koretic@sartura.hr> { if (!x) return; + if (!data) + return set_empty(t_lxc_list) + var lxc_count = Object.keys(data).length - if (!data || !lxc_count) + if (!lxc_count) return set_empty(t_lxc_list) if (document.getElementById('empty') !== null) @@ -443,8 +497,11 @@ Author: Petar Koretic <petar.koretic@sartura.hr> { if (!x) return; - var lxc_count = Object.keys(data).length - if (!data || !lxc_count) return; + if (!data) return set_empty_template(); + + var lxc_count = Object.keys(data).length; + if (!lxc_count) return set_empty_template(); + var select = document.getElementById("s_template"); for(var key in data) { @@ -454,5 +511,5 @@ Author: Petar Koretic <petar.koretic@sartura.hr> select.add(option, -1); } }) - -//]]></script> +//]]> +</script> diff --git a/applications/luci-app-mwan3/po/ja/mwan3.po b/applications/luci-app-mwan3/po/ja/mwan3.po index cfbf5ac464..a5826926dd 100644 --- a/applications/luci-app-mwan3/po/ja/mwan3.po +++ b/applications/luci-app-mwan3/po/ja/mwan3.po @@ -7,7 +7,7 @@ msgstr "" "Language-Team: \n" "MIME-Version: 1.0\n" "Content-Transfer-Encoding: 8bit\n" -"X-Generator: Poedit 2.0.3\n" +"X-Generator: Poedit 2.0.7\n" "Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n" "Plural-Forms: nplurals=1; plural=0;\n" "Language: ja\n" @@ -44,7 +44,7 @@ msgid "Check IP rules" msgstr "IP ルールのチェック" msgid "Check link quality" -msgstr "" +msgstr "リンク品質のチェック" msgid "Check routing table" msgstr "ルーティング テーブルのチェック" @@ -59,7 +59,7 @@ msgid "Destination port" msgstr "宛先ポート" msgid "Detail" -msgstr "" +msgstr "詳細" msgid "Diagnostics" msgstr "診断機能" @@ -80,7 +80,7 @@ msgid "Enter value in hex, starting with <code>0x</code>" msgstr "<code>0x</code> で始まる16進数の値を入力してください。" msgid "Execute" -msgstr "" +msgstr "実行" msgid "Expect interface state on up event" msgstr "Up イベント時に予想されるインターフェースの状態です。" @@ -92,10 +92,12 @@ msgid "Firewall mask" msgstr "ファイアウォール マスク" msgid "Flush conntrack table" -msgstr "" +msgstr "conntrack テーブルのクリア" msgid "Flush global firewall conntrack table on interface events" msgstr "" +"インターフェース イベント時にグローバル ファイアウォール conntrack テーブルを" +"クリアします。" msgid "Globals" msgstr "全般" @@ -107,7 +109,7 @@ msgid "Hotplug ifup" msgstr "ホットプラグ ifup" msgid "INFO: MWAN not running" -msgstr "" +msgstr "情報: MWAN は実行されていません" msgid "IPset" msgstr "IPset" @@ -160,28 +162,28 @@ msgid "Local source interface" msgstr "" msgid "MWAN - Globals" -msgstr "" +msgstr "MWAN - グローバル" msgid "MWAN - Interfaces" -msgstr "" +msgstr "MWAN - インターフェース" msgid "MWAN - Members" -msgstr "" +msgstr "MWAN - メンバー" msgid "MWAN - Notification" -msgstr "" +msgstr "MWAN - 通知" msgid "MWAN - Policies" -msgstr "" +msgstr "MWAN - ポリシー" msgid "MWAN - Rules" -msgstr "" +msgstr "MWAN - ルール" msgid "MWAN Interface Configuration - %s" msgstr "MWAN インターフェース設定 - %s" msgid "MWAN Interfaces" -msgstr "" +msgstr "MWAN インターフェース" msgid "MWAN Member Configuration - %s" msgstr "MWAN メンバー設定 - %s" @@ -193,13 +195,13 @@ msgid "MWAN Rule Configuration - %s" msgstr "MWAN ルール設定 - %s" msgid "MWAN Status - Detail" -msgstr "" +msgstr "MWAN ステータス - 詳細" msgid "MWAN Status - Diagnostics" -msgstr "" +msgstr "MWAN ステータス - 診断" msgid "MWAN Status - Troubleshooting" -msgstr "" +msgstr "MWAN ステータス - トラブルシューティング" msgid "" "MWAN supports up to 252 physical and/or logical interfaces<br />MWAN " @@ -218,10 +220,10 @@ msgstr "" "シー、ルールと同じ名前を使用することはできません。" msgid "Max packet latency [ms]" -msgstr "" +msgstr "最大パケットレイテンシ [ms]" msgid "Max packet loss [%]" -msgstr "" +msgstr "最大パケットロス [%]" msgid "" "May be entered as a single or multiple port(s) (eg \"22\" or \"80,443\") or " @@ -256,10 +258,10 @@ msgid "Metric" msgstr "メトリック" msgid "Min packet latency [ms]" -msgstr "" +msgstr "最小パケットレイテンシ [ms]" msgid "Min packet loss [%]" -msgstr "" +msgstr "最小パケットロス [%]" msgid "" "Name of IPset rule. Requires IPset rule in /etc/dnsmasq.conf (eg \"ipset=/" @@ -275,7 +277,7 @@ msgid "No MWAN interfaces found" msgstr "MWAN インターフェースが見つかりません" msgid "Notification" -msgstr "" +msgstr "通知" msgid "Offline" msgstr "オフライン" @@ -357,6 +359,16 @@ msgid "" "z, 0-9, _ and no spaces<br />Rules may not share the same name as configured " "interfaces, members or policies" msgstr "" +"ルールは、どのトラフィックが特定の MWAN ポリシーを使用するかを指定します<br /" +">ルールは IP アドレスやポート、プロトコルに基づいています<br />ルールは上から" +"下へマッチングが行われます<br />合致したルールより下のルールは無視されます" +"<br />いずれのルールにもマッチしないトラフィックは、メインのルーティングテー" +"ブルを使用してルーティングされます<br />既知（デフォルト以外）のネットワーク" +"へのトラフィックは、メインのルーティングテーブルによって制御されます<br />ト" +"ラフィックがルールに合致しても、全 WAN インターフェースが down の場合は " +"blackhole 状態となります<br />名前は A-Z, a-z, 0-9, _ を含むことができます" +"が、スペースは使用できません<br />ルールは、設定済みのインターフェースやメン" +"バー、ポリシーと同じ名前を使用することはできません。" msgid "Seconds. Acceptable values: 1-1000000. Defaults to 600 if not set" msgstr "秒。利用可能な値: 1-1000000。空欄の場合のデフォルト値は600です。" @@ -377,7 +389,7 @@ msgid "Supports CIDR notation (eg \"192.168.100.0/24\") without quotes" msgstr "CIDR 表記のサポート（例: \"192.168.100.0/24\"）" msgid "Task" -msgstr "" +msgstr "タスク" msgid "There are currently %d of %d supported interfaces configured" msgstr "現在、%d 個中 %d 個のサポートされたインターフェースが設定済みです。" @@ -412,6 +424,21 @@ msgid "" "Physical device name which interface went up or down (e.g. \"eth0\" or " "\"wwan0\")<br /><br />" msgstr "" +"このセクションでは、 \"/etc/mwan3.user\" の内容を変更することができます。" +"<br />このファイルも sysupgrade の際に保持されます。<br /><br />注意: <br />" +"このファイルはシェルスクリプトとして解釈されます。<br />最初の行は "#!/" +"bin/sh" である必要があります（クォーテーション不要）。<br /># で始まる行" +"はコメントであり、実行されません。<br />mwan3 のカスタム動作をここに入力して" +"ください。<br />これらは、mwan3 で有効なインターフェースの<br /> netifd " +"hotplug インターフェース イベント毎に実行されます。<br /><br />このスクリプト" +"に受け渡される主に３つの環境変数が利用できます。<br /><br />$ACTION<br />* " +"\"ifup\" は netifd と mwan3track により呼び出されます<br />* \"ifdown\" は " +"netifd と mwan3track により呼び出されます<br />* \"connected\" はトラッキング" +"が成功した際に mwan3track にのみにより呼び出されます<br />* \"disconnected\" " +"は トラッキングが失敗した際に mwan3track のみにより呼び出されます<br />" +"$INTERFACE up または down したインターフェース名（例: \"wan\" や \"wwan\"）" +"<br />$DEVICE up または down したインターフェースの物理デバイス名（例: " +"\"eth0\" や \"wwan0\"）<br /><br />" msgid "Tracking hostname or IP address" msgstr "追跡ホスト名または IP アドレス" @@ -441,36 +468,42 @@ msgstr "" "インターフェースの IP アドレスが使用されます。" msgid "View the content of /etc/protocols for protocol description" -msgstr "" +msgstr "プロトコルの説明については、 /etc/protocols の内容を確認してください" msgid "WARNING: %d interfaces are configured exceeding the maximum of %d!" msgstr "" "警告: %d 個のインターフェースが、最大個数の %d 個 を超えて設定されています！" msgid "WARNING: Interface %s are not found in /etc/config/network" -msgstr "" +msgstr "警告: インターフェース %s が /etc/config/network に見つかりません" msgid "WARNING: Interface %s has a duplicate metric %s configured" -msgstr "" +msgstr "警告: インターフェース %s に重複するメトリック %s が設定されています" msgid "" "WARNING: Interface %s has a higher reliability requirement than tracking " "hosts (%d)" msgstr "" +"警告: インターフェース %s は追跡ホスト数 (%d) よりも高い追跡信頼性の値が設定" +"されています" msgid "WARNING: Interface %s has no default route in the main routing table" msgstr "" +"警告: インターフェース %s はメインのルーティング テーブル内でデフォルトルート" +"がありません" msgid "WARNING: Policy %s has exceeding the maximum name of 15 characters" -msgstr "" +msgstr "警告: ポリシー %s の名前は15文字の最大文字数を超えています" msgid "" "WARNING: Rule %s have a port configured with no or improper protocol " "specified!" msgstr "" +"警告: ルール %s はプロトコル指定が不適切、または無いポートが設定されていま" +"す！" msgid "Waiting for command to complete..." -msgstr "" +msgstr "コマンドを実行中です..." msgid "Weight" msgstr "ウエイト" @@ -504,289 +537,3 @@ msgstr "never" msgid "unreachable (reject)" msgstr "unreachable (reject)" - -#~ msgid "Online (tracking active)" -#~ msgstr "オンライン（追跡実行中）" - -#~ msgid "MWAN Interface Live Status" -#~ msgstr "MWAN インターフェース Live ステータス" - -#~ msgid "Online (tracking off)" -#~ msgstr "オンライン（追跡オフ）" - -#~ msgid "" -#~ "This section allows you to modify the content of \"/etc/mwan3.user\".<br /" -#~ ">The file is also preserved during sysupgrade.<br /><br />Notes:<br /" -#~ ">This file is interpreted as a shell script.<br />The first line of the " -#~ "script must be "#!/bin/sh" without quotes.<br />Lines beginning " -#~ "with # are comments and are not executed.<br />Put your custom mwan3 " -#~ "action here, they will<br />be executed with each netifd hotplug " -#~ "interface event<br />on interfaces for which mwan3 is enabled.<br /><br /" -#~ ">There are three main environment variables that are passed to this " -#~ "script.<br /><br />$ACTION Either \"ifup\" or \"ifdown\"<br />$INTERFACE " -#~ "Name of the interface which went up or down (e.g. \"wan\" or \"wwan" -#~ "\")<br />$DEVICE Physical device name which interface went up or down (e." -#~ "g. \"eth0\" or \"wwan0\")<br /><br />" -#~ msgstr "" -#~ "このセクションでは、 \"/etc/mwan3.user\" の内容を変更することができます。" -#~ "<br />このファイルは、 sysupgrade 時に保持されます。<br /><br />注意: " -#~ "<br />このファイルは、シェルスクリプトとして解釈されます。<br />スクリプト" -#~ "の1行目は、"#!bin/sh" である必要があります（クォーテーション不" -#~ "要）。<br /># で始まる行はコメントであり、実行されません。<br />mwan3 のカ" -#~ "スタム動作をここに入力してください。これらは、 mwan3 が有効なインター" -#~ "フェースの<br />netifd ホットプラグ インターフェース イベント毎に実行され" -#~ "ます。<br /><br />主に3つの環境変数が利用可能です。<br /><br />$ACTION - " -#~ "\"ifup\" および \"ifdown\"<br />$INTERFACE - Up または Down が行われたイン" -#~ "ターフェース名（例: \"wan\" や \"wwan\"）<br />$DEVICE - Up または Down が" -#~ "行われた物理デバイス名（例: \"eth0\" や \"wwan0\"）<br /><br />" - -#~ msgid "Currently Configured Interfaces" -#~ msgstr "設定済みインターフェース" - -#~ msgid "Currently Configured Members" -#~ msgstr "設定済みメンバー" - -#~ msgid "Currently Configured Policies" -#~ msgstr "設定済みポリシー" - -#~ msgid "Detailed Status" -#~ msgstr "詳細ステータス" - -#~ msgid "Diagnostic Results" -#~ msgstr "診断結果" - -#~ msgid "Error collecting troubleshooting information" -#~ msgstr "トラブルシューティング情報の収集エラー" - -#~ msgid "Errors" -#~ msgstr "エラー" - -#~ msgid "Globals mwan3 options" -#~ msgstr "MWAN3 全般オプション" - -#~ msgid "Interface Status" -#~ msgstr "インターフェース ステータス" - -#~ msgid "Last 50 MWAN systemlog entries. Newest entries sorted at the top :" -#~ msgstr "直近の MWAN システムログ（50行）です。一番上が最新の行です:" - -#~ msgid "MWAN Detailed Status" -#~ msgstr "MWAN 詳細ステータス" - -#~ msgid "MWAN Interface Configuration" -#~ msgstr "MWAN インターフェース設定" - -#~ msgid "MWAN Interface Diagnostics" -#~ msgstr "MWAN インターフェース診断" - -#~ msgid "MWAN Interface Systemlog" -#~ msgstr "MWAN インターフェース システムログ" - -#~ msgid "MWAN Member Configuration" -#~ msgstr "MWAN メンバー設定" - -#~ msgid "MWAN Policy Configuration" -#~ msgstr "MWAN ポリシー設定" - -#~ msgid "MWAN Rule Configuration" -#~ msgstr "MWAN ルール設定" - -#~ msgid "MWAN Service Control" -#~ msgstr "MWAN サービス コントロール" - -#~ msgid "No MWAN systemlog history found" -#~ msgstr "MWAN システムログの履歴が見つかりません" - -#~ msgid "No detailed status information available" -#~ msgstr "詳細ステータス情報は利用できません" - -#~ msgid "No diagnostic results returned" -#~ msgstr "診断結果がありません" - -#~ msgid "No protocol specified" -#~ msgstr "プロトコルが設定されていません" - -#~ msgid "Restart MWAN" -#~ msgstr "MWAN の再起動" - -#~ msgid "" -#~ "Rules specify which traffic will use a particular MWAN policy based on IP " -#~ "address, port or protocol<br />Rules are matched from top to bottom. " -#~ "Rules below a matching rule are ignored. Traffic not matching any rule is " -#~ "routed using the main routing table<br />Traffic destined for known " -#~ "(other than default) networks is handled by the main routing table. " -#~ "Traffic matching a rule, but all WAN interfaces for that policy are down " -#~ "will be blackholed<br />Names may contain characters A-Z, a-z, 0-9, _ and " -#~ "no spaces<br />Rules may not share the same name as configured " -#~ "interfaces, members or policies" -#~ msgstr "" -#~ "ルールは IP アドレスやポート、プロトコルを基に、トラフィックがどの MWAN ポ" -#~ "リシーを使用するかを設定します。<br />ルールは上から下へマッチングが行わ" -#~ "れ、合致したルールより下のルールは無視されます。全てのルールに合致しないト" -#~ "ラフィックは、メインのルーティング テーブルを使用してルートが決定されま" -#~ "す。<br />既知（デフォルト以外）のネットワークへのトラフィックは、メインの" -#~ "ルーティング テーブルによって制御されます。ルールに合致したトラフィックで" -#~ "も、当該ポリシーの全 WAN インターフェースが Down 状態の場合は blackhole 状" -#~ "態となります。<br />名前は A-Z, a-z, 0-9, _ を含むことができますが、スペー" -#~ "スは使用できません。<br />ルールは、設定済みのインターフェースやメンバー、" -#~ "ポリシーと同じ名前を使用することはできません。" - -#~ msgid "Start MWAN" -#~ msgstr "MWAN の起動" - -#~ msgid "Stop MWAN" -#~ msgstr "MWAN の停止" - -#~ msgid "Tracking IP" -#~ msgstr "追跡 IP" - -#~ msgid "Traffic Rules" -#~ msgstr "トラフィック ルール" - -#~ msgid "Troubleshooting Data" -#~ msgstr "トラブルシューティング データ" - -#~ msgid "View the contents of /etc/protocols for protocol descriptions" -#~ msgstr "" -#~ "プロトコルの説明については、 /etc/protocols の内容を確認してください。" - -#~ msgid "" -#~ "WARNING: Some interfaces are configured incorrectly or not at all in /etc/" -#~ "config/network!" -#~ msgstr "" -#~ "警告: 設定を誤っているか、もしくは完全に設定されていないインターフェースが" -#~ "あります！" - -#~ msgid "" -#~ "WARNING: Some interfaces have a higher reliability requirement than there " -#~ "are tracking IP addresses!" -#~ msgstr "" -#~ "警告: 追跡 IP アドレスの個数より大きい追跡信頼性の値が設定されたインター" -#~ "フェースがあります！" - -#~ msgid "" -#~ "WARNING: Some interfaces have duplicate metrics configured in /etc/config/" -#~ "network!" -#~ msgstr "" -#~ "警告: /etc/config/network で、重複するメトリックを設定されているインター" -#~ "フェースがあります！" - -#~ msgid "" -#~ "WARNING: Some interfaces have no default route in the main routing table!" -#~ msgstr "" -#~ "警告: メインのルーティング テーブルで、デフォルト ルートを設定されていない" -#~ "インターフェースがあります！" - -#~ msgid "" -#~ "WARNING: Some interfaces have no metric configured in /etc/config/network!" -#~ msgstr "" -#~ "警告: /etc/config/network で、メトリックを設定されていないインターフェース" -#~ "があります！" - -#~ msgid "" -#~ "WARNING: Some policies have names exceeding the maximum of 15 characters!" -#~ msgstr "" -#~ "警告: 最大文字数の 15 文字を超える名前が設定されているポリシーがあります！" - -#~ msgid "" -#~ "WARNING: Some rules have a port configured with no or improper protocol " -#~ "specified! Please configure a specific protocol!" -#~ msgstr "" -#~ "警告: 不適切なプロトコルが指定されている、または何も指定されていないポート" -#~ "を設定されたルールがあります！プロトコルを指定し直してください！" - -#~ msgid "" -#~ "WARNING: This and other interfaces have duplicate metrics configured in /" -#~ "etc/config/network!" -#~ msgstr "" -#~ "警告: これと他のインターフェースで重複するメトリックが /etc/config/" -#~ "network に設定されています！" - -#~ msgid "" -#~ "WARNING: This interface has a higher reliability requirement than there " -#~ "are tracking IP addresses!" -#~ msgstr "" -#~ "警告: このインターフェースは、追跡 IP アドレスの個数より大きい追跡信頼性の" -#~ "値を設定されています！" - -#~ msgid "" -#~ "WARNING: This interface has no default route in the main routing table!" -#~ msgstr "" -#~ "警告: このインターフェースは、メインのルーティング テーブルにデフォルト " -#~ "ルートが設定されていません！" - -#~ msgid "" -#~ "WARNING: This interface has no metric configured in /etc/config/network!" -#~ msgstr "" -#~ "警告: このインターフェースは、 /etc/config/network でメトリックが設定され" -#~ "ていません！" - -#~ msgid "" -#~ "WARNING: This interface is configured incorrectly or not at all in /etc/" -#~ "config/network!" -#~ msgstr "" -#~ "警告: このインターフェースは /etc/config/network で設定が誤っているか、も" -#~ "しくは完全に設定されていません！" - -#~ msgid "" -#~ "WARNING: This policy's name is %d characters exceeding the maximum of 15!" -#~ msgstr "" -#~ "警告: このポリシーの名前は、最大文字数 15 文字を超える %d 文字が設定されて" -#~ "います！" - -#~ msgid "" -#~ "WARNING: This rule is incorrectly configured with no or improper protocol " -#~ "specified! Please configure a specific protocol!" -#~ msgstr "" -#~ "警告: このルールは不適切なプロトコルが指定されているか、または何も指定され" -#~ "ていません！プロトコルを指定し直してください！" - -#~ msgid "Waiting for MWAN to %s..." -#~ msgstr "MWAN の %s を待っています..." - -#~ msgid "Waiting for diagnostic results..." -#~ msgstr "診断結果を待っています..." - -#~ msgid "restart" -#~ msgstr "再起動" - -#~ msgid "start" -#~ msgstr "起動" - -#~ msgid "stop" -#~ msgstr "停止" - -#~ msgid "Advanced" -#~ msgstr "詳細設定" - -#~ msgid "Configuration" -#~ msgstr "設定" - -#~ msgid "Hotplug Script" -#~ msgstr "ホットプラグ スクリプト" - -#~ msgid "MWAN Config" -#~ msgstr "MWAN 設定" - -#~ msgid "Network Config" -#~ msgstr "ネットワーク設定" - -#~ msgid "Overview" -#~ msgstr "概要" - -#~ msgid "This section allows you to modify the contents of /etc/config/mwan3" -#~ msgstr "" -#~ "このセクションでは、 /etc/config/mwan3 の内容を変更することができます。" - -#~ msgid "" -#~ "This section allows you to modify the contents of /etc/config/network" -#~ msgstr "" -#~ "このセクションでは、 /etc/config/network の内容を変更することができます。" - -#~ msgid "" -#~ "This section allows you to modify the contents of /etc/config/wireless" -#~ msgstr "" -#~ "このセクションでは、 /etc/config/wireless の内容を変更することができます。" - -#~ msgid "Wireless Config" -#~ msgstr "無線設定" diff --git a/applications/luci-app-openvpn/luasrc/model/cbi/openvpn.lua b/applications/luci-app-openvpn/luasrc/model/cbi/openvpn.lua index d2b5d32c05..a6b0e1dd90 100644 --- a/applications/luci-app-openvpn/luasrc/model/cbi/openvpn.lua +++ b/applications/luci-app-openvpn/luasrc/model/cbi/openvpn.lua @@ -56,7 +56,7 @@ function s.create(self, name) luci.cbi.CREATE_PREFIX .. self.config .. "." .. self.sectiontype .. ".text" ) - if string.len(name)>3 and not name:match("[^a-zA-Z0-9_]") then + if #name > 3 and not name:match("[^a-zA-Z0-9_]") then uci:section( "openvpn", "openvpn", name, uci:get_all( "openvpn_recipes", recipe ) @@ -67,9 +67,11 @@ function s.create(self, name) uci:save("openvpn") luci.http.redirect( self.extedit:format(name) ) - else + elseif #name > 0 then self.invalid_cts = true end + + return 0 end @@ -103,10 +105,7 @@ function updown.cfgvalue(self, section) end function updown.write(self, section, value) if self.option == "stop" then - local pid = s.getPID(section) - if pid ~= nil then - sys.process.signal(pid,15) - end + luci.sys.call("/etc/init.d/openvpn stop %s" % section) else luci.sys.call("/etc/init.d/openvpn start %s" % section) end @@ -126,5 +125,8 @@ function proto.cfgvalue(self, section) return val or "udp" end +function m.on_after_commit(self,map) + require("luci.sys").call('/etc/init.d/openvpn reload') +end return m diff --git a/applications/luci-app-travelmate/luasrc/view/travelmate/stations.htm b/applications/luci-app-travelmate/luasrc/view/travelmate/stations.htm index f76b52e9cc..75e52aeb27 100644 --- a/applications/luci-app-travelmate/luasrc/view/travelmate/stations.htm +++ b/applications/luci-app-travelmate/luasrc/view/travelmate/stations.htm @@ -46,8 +46,8 @@ This is free software, licensed under the Apache License, Version 2.0 <td style="<%=style%>"><%=bssid%></td> <td style="<%=style%>"><%=encryption%></td> <td class="cbi-value-field" style="width:80px"> - <input class="cbi-button cbi-button-up" type="button" value="" onclick="location.href='<%=luci.dispatcher.build_url('admin/services/travelmate/wifiorder')%>?cfg=<%=section%>&dir=up'" alt="<%:Move up%>" title="<%:Move up%>"/> - <input class="cbi-button cbi-button-down" type="button" value="" onclick="location.href='<%=luci.dispatcher.build_url('admin/services/travelmate/wifiorder')%>?cfg=<%=section%>&dir=down'" alt="<%:Move down%>" title="<%:Move down%>"/> + <input class="cbi-button cbi-button-up" type="button" value="" onclick="location.href='<%=luci.dispatcher.build_url('admin/services/travelmate/wifiorder')%>?cfg=<%=section%>&dir=up'" alt="<%:Move up%>" title="<%:Move up%>"/> + <input class="cbi-button cbi-button-down" type="button" value="" onclick="location.href='<%=luci.dispatcher.build_url('admin/services/travelmate/wifiorder')%>?cfg=<%=section%>&dir=down'" alt="<%:Move down%>" title="<%:Move down%>"/> </td> <td class="cbi-value-field" style="width:150px"> <input type="button" class="cbi-button cbi-button-edit" onclick="location.href='<%=luci.dispatcher.build_url('admin/services/travelmate/wifiedit')%>?cfg=<%=section%>'" title="<%:Edit this Uplink%>" value="<%:Edit%>"/> diff --git a/modules/luci-base/po/ca/base.po b/modules/luci-base/po/ca/base.po index 22889f5dbe..f9976f3ebf 100644 --- a/modules/luci-base/po/ca/base.po +++ b/modules/luci-base/po/ca/base.po @@ -174,9 +174,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -213,9 +210,6 @@ msgstr "Número de dispositiu ATM" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Concentrador d'accés" @@ -323,11 +317,6 @@ msgstr "Permet respostes del rang 127.0.0.0/8, p.e. per serveis RBL" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -517,9 +506,6 @@ msgstr "Adreça mal especificada!" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -707,9 +693,6 @@ msgstr "Connectat" msgid "Connection Limit" msgstr "Límit de connexió" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Connexions" @@ -847,9 +830,6 @@ msgstr "Passarel·la per defecte" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "Estat per defecte" @@ -1381,9 +1361,6 @@ msgstr "Penja" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1501,9 +1478,6 @@ msgstr "Estat WAN IPv6" msgid "IPv6 address" msgstr "Adreça IPv6" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2082,9 +2056,6 @@ msgstr "" msgid "NTP server candidates" msgstr "Candidats de servidor NTP" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Nom" @@ -2262,12 +2233,6 @@ msgstr "Opció treta" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2728,9 +2693,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2813,9 +2775,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2841,14 +2800,6 @@ msgstr "" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2902,17 +2853,6 @@ msgstr "Clients separats" msgid "Server Settings" msgstr "Ajusts de servidor" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "Nom de servei" @@ -3006,9 +2946,6 @@ msgstr "Ordena" msgid "Source" msgstr "Origen" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "Especifica el directori a que el dispositiu està adjuntat" @@ -3304,11 +3241,6 @@ msgstr "" "tinguis." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3468,15 +3400,6 @@ msgstr "Interfície del túnel" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "Potència Tx" @@ -3652,12 +3575,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "Classe de venidor per enviar al sol·licitar DHCP" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "Verifica" @@ -3689,10 +3606,6 @@ msgstr "" "La xifratge WPA requereix que sigui instal·lat el wpa_supplicant (pel mode " "client) o el hostapd (pels modes AP i ad hoc)." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "Esperant que s'apliquin els canvis..." @@ -3716,12 +3629,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3865,9 +3772,6 @@ msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "fitxer <abbr title=\"Domain Name System\">DNS</abbr> local" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/cs/base.po b/modules/luci-base/po/cs/base.po index 924d0e6769..daae96c49d 100644 --- a/modules/luci-base/po/cs/base.po +++ b/modules/luci-base/po/cs/base.po @@ -169,9 +169,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -208,9 +205,6 @@ msgstr "číslo ATM zařízení" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Přístupový koncentrátor" @@ -319,11 +313,6 @@ msgstr "Povolit upstream odpovědi na 127.0.0.0/8 rozsah, např. pro RBL služby msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -512,9 +501,6 @@ msgstr "Zadána neplatná adresa!" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -701,9 +687,6 @@ msgstr "Připojeno" msgid "Connection Limit" msgstr "Omezení počtu připojení" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Připojení" @@ -841,9 +824,6 @@ msgstr "Výchozí brána" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "Výchozí stav" @@ -1381,9 +1361,6 @@ msgstr "Zavěsit" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1500,9 +1477,6 @@ msgstr "Stav IPv6 WAN" msgid "IPv6 address" msgstr "IPv6 adresa" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2090,9 +2064,6 @@ msgstr "" msgid "NTP server candidates" msgstr "Kandidáti NTP serveru" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Název" @@ -2269,12 +2240,6 @@ msgstr "Volba odstraněna" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2752,9 +2717,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2838,9 +2800,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2865,14 +2824,6 @@ msgstr "Spustit kontrolu souborového systému" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2928,17 +2879,6 @@ msgstr "Oddělovat klienty" msgid "Server Settings" msgstr "Nastavení serveru" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "Název služby" @@ -3035,9 +2975,6 @@ msgstr "Seřadit" msgid "Source" msgstr "Zdroj" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "" @@ -3347,11 +3284,6 @@ msgstr "" "mohli znovu připojit." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3508,15 +3440,6 @@ msgstr "Rozhraní tunelu" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "Tx-Power" @@ -3695,12 +3618,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "Ověřit" @@ -3732,10 +3649,6 @@ msgstr "" "Šifrování WPA vyžaduje nainstalovaný wpa_supplicant (pro klientský režim) " "nebo hostapd (pro AP a ad-hoc režim)." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "Čekání na realizaci změn..." @@ -3759,12 +3672,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3906,9 +3813,6 @@ msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "místní <abbr title=\"Domain Name System\">DNS</abbr> soubor" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/de/base.po b/modules/luci-base/po/de/base.po index 4271d8e901..a7b003caf3 100644 --- a/modules/luci-base/po/de/base.po +++ b/modules/luci-base/po/de/base.po @@ -172,9 +172,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -211,9 +208,6 @@ msgstr "ATM Geräteindex" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Access Concentrator" @@ -322,13 +316,6 @@ msgstr "" msgid "Allowed IPs" msgstr "Erlaubte IP-Adressen" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" -"Siehe auch <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> bei SIXXS." - msgid "Always announce default router" msgstr "Immer Defaultrouter ankündigen" @@ -523,9 +510,6 @@ msgstr "Ungültige Adresse angegeben!" msgid "Band" msgstr "Frequenztyp" -msgid "Behind NAT" -msgstr "NAT" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -725,9 +709,6 @@ msgstr "Verbunden" msgid "Connection Limit" msgstr "Verbindungslimit" -msgid "Connection to server fails when TLS cannot be used" -msgstr "TLS zwingend vorraussetzen und abbrechen wenn TLS fehlschlägt." - msgid "Connections" msgstr "Verbindungen" @@ -865,9 +846,6 @@ msgstr "Default Gateway" msgid "Default is stateless + stateful" msgstr "Der Standardwert ist zustandslos und zustandsorientiert" -msgid "Default route" -msgstr "Default Route" - msgid "Default state" msgstr "Ausgangszustand" @@ -1420,9 +1398,6 @@ msgstr "Auflegen" msgid "Header Error Code Errors (HEC)" msgstr "Anzahl Header-Error-Code-Fehler (HEC)" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1538,9 +1513,6 @@ msgstr "IPv6 WAN Status" msgid "IPv6 address" msgstr "IPv6 Adresse" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "Zum lokalen Tunnelendpunkt delegierte IPv6-Adresse (optional)" - msgid "IPv6 assignment hint" msgstr "IPv6 Zuweisungshinweis" @@ -2155,9 +2127,6 @@ msgstr "" msgid "NTP server candidates" msgstr "NTP Server Kandidaten" -msgid "NTP sync time-out" -msgstr "NTP Synchronisierungstimeout" - msgid "Name" msgstr "Name" @@ -2336,14 +2305,6 @@ msgstr "Option entfernt" msgid "Optional" msgstr "Optional" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" -"Optional, angeben um den Standardserver (tic.sixxs.net) zu überschreiben" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" -"Optional, angeben wenn das SIXSS Konto mehr als einen Tunnel beinhaltet" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2838,9 +2799,6 @@ msgstr "IPv6-Adresse anfordern" msgid "Request IPv6-prefix of length" msgstr "IPv6-Präfix dieser Länge anfordern" -msgid "Require TLS" -msgstr "TLS erfordern" - msgid "Required" msgstr "Benötigt" @@ -2932,9 +2890,6 @@ msgstr "Erlaubte IP-Addressen routen" msgid "Route type" msgstr "Routen-Typ" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "Geroutetes IPv6-Präfix für nachgelagerte Schnittstellen" - msgid "Router Advertisement-Service" msgstr "Router-Advertisement-Dienst" @@ -2960,14 +2915,6 @@ msgstr "Dateisystemprüfung durchführen" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -3023,19 +2970,6 @@ msgstr "Clients isolieren" msgid "Server Settings" msgstr "Servereinstellungen" -msgid "Server password" -msgstr "Server Passwort" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" -"Server Passwort bzw. das tunnelspezifische Passwort wenn der Benutzername " -"eine Tunnel-ID beinhaltet." - -msgid "Server username" -msgstr "Server Benutzername" - msgid "Service Name" msgstr "Service-Name" @@ -3136,9 +3070,6 @@ msgstr "Sortieren" msgid "Source" msgstr "Quelle" -msgid "Source routing" -msgstr "Quell-Routing" - msgid "Specifies the directory the device is attached to" msgstr "Nennt das Verzeichnis, an welches das Gerät angebunden ist" @@ -3467,13 +3398,6 @@ msgstr "" "Adresse beziehen müssen um auf das Gerät zugreifen zu können." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" -"Der lokale Tunnel-Endpunkt ist hinter einem NAT. Standard ist deaktiviert, " -"nur auf AYIYA anwendbar." - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3645,15 +3569,6 @@ msgstr "Tunnelschnittstelle" msgid "Tunnel Link" msgstr "Basisschnittstelle" -msgid "Tunnel broker protocol" -msgstr "Tunnel-Boker-Protokoll" - -msgid "Tunnel setup server" -msgstr "Tunnel-Setup-Server" - -msgid "Tunnel type" -msgstr "Tunneltyp" - msgid "Tx-Power" msgstr "Sendestärke" @@ -3835,12 +3750,6 @@ msgstr "Hersteller" msgid "Vendor Class to send when requesting DHCP" msgstr "Bei DHCP-Anfragen gesendete Vendor-Klasse" -msgid "Verbose" -msgstr "Umfangreiche Ausgaben" - -msgid "Verbose logging by aiccu daemon" -msgstr "Aktiviert erweiterte Protokollierung durch den AICCU-Prozess" - msgid "Verify" msgstr "Verifizieren" @@ -3872,12 +3781,6 @@ msgstr "" "WPA-Verschlüsselung benötigt wpa_supplicant (für Client-Modus) oder hostapd " "(für AP oder Ad-Hoc Modus)." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" -"Warte die angegebene Anzahl an Sekunden auf NTP-Synchronisierung, der Wert 0 " -"deaktiviert das Warten (optional)" - msgid "Waiting for changes to be applied..." msgstr "Änderungen werden angewandt..." @@ -3905,13 +3808,6 @@ msgstr "" "Wenn PSK in Verwendung ist, können PMK-Schlüssel lokal ohne Inter-Access-" "Point-Kommunikation erzeugt werden." -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" -"Gibt an, ob eine IPv6-Default-Route durch den Tunnel etabliert werden soll" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "Gibt an, ob nur Pakete von delegierten Präfixen geroutet werden sollen" - msgid "Width" msgstr "Breite" @@ -4053,9 +3949,6 @@ msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "Lokale DNS-Datei" -msgid "minimum 1280, maximum 1480" -msgstr "Minimum 1280, Maximum 1480" - msgid "minutes" msgstr "Minuten" @@ -4130,126 +4023,3 @@ msgstr "ja" msgid "« Back" msgstr "« Zurück" - -#~ msgid "Apply" -#~ msgstr "Anwenden" - -#~ msgid "Applying changes" -#~ msgstr "Änderungen werden angewandt" - -#~ msgid "Configuration applied." -#~ msgstr "Konfiguration angewendet." - -#~ msgid "Save & Apply" -#~ msgstr "Speichern & Anwenden" - -#~ msgid "The following changes have been committed" -#~ msgstr "Die folgenden Änderungen wurden angewendet" - -#~ msgid "There are no pending changes to apply!" -#~ msgstr "Es gibt keine ausstehenen Änderungen anzuwenden!" - -#~ msgid "Action" -#~ msgstr "Aktion" - -#~ msgid "Buttons" -#~ msgstr "Knöpfe" - -#~ msgid "Handler" -#~ msgstr "Handler" - -#~ msgid "Maximum hold time" -#~ msgstr "Maximalzeit zum Halten der Verbindung" - -#~ msgid "Minimum hold time" -#~ msgstr "Minimalzeit zum Halten der Verbindung" - -#~ msgid "Path to executable which handles the button event" -#~ msgstr "Ausführbare Datei welche das Schalter-Ereignis verarbeitet" - -#~ msgid "Specifies the button state to handle" -#~ msgstr "Gibt den zu behandelnden Tastenstatus an" - -#~ msgid "This page allows the configuration of custom button actions" -#~ msgstr "" -#~ "Diese Seite ermöglicht die Konfiguration benutzerdefinierter " -#~ "Tastenaktionen" - -#~ msgid "Leasetime" -#~ msgstr "Laufzeit" - -#~ msgid "Optional." -#~ msgstr "Optional" - -#~ msgid "AuthGroup" -#~ msgstr "Berechtigungsgruppe" - -#~ msgid "automatic" -#~ msgstr "automatisch" - -#~ msgid "AR Support" -#~ msgstr "AR-Unterstützung" - -#~ msgid "Atheros 802.11%s Wireless Controller" -#~ msgstr "Atheros 802.11%s W-LAN Adapter" - -#~ msgid "Background Scan" -#~ msgstr "Hintergrundscan" - -#~ msgid "Compression" -#~ msgstr "Kompression" - -#~ msgid "Disable HW-Beacon timer" -#~ msgstr "Deaktiviere Hardware-Beacon Zeitgeber" - -#~ msgid "Do not send probe responses" -#~ msgstr "Scan-Anforderungen nicht beantworten" - -#~ msgid "Fast Frames" -#~ msgstr "Schnelle Frames" - -#~ msgid "Maximum Rate" -#~ msgstr "Höchstübertragungsrate" - -#~ msgid "Minimum Rate" -#~ msgstr "Mindestübertragungsrate" - -#~ msgid "Multicast Rate" -#~ msgstr "Multicastrate" - -#~ msgid "Outdoor Channels" -#~ msgstr "Funkkanal für den Ausseneinsatz" - -#~ msgid "Regulatory Domain" -#~ msgstr "Geltungsbereich (Regulatory Domain)" - -#~ msgid "Separate WDS" -#~ msgstr "Separates WDS" - -#~ msgid "Static WDS" -#~ msgstr "Statisches WDS" - -#~ msgid "Turbo Mode" -#~ msgstr "Turbo Modus" - -#~ msgid "XR Support" -#~ msgstr "XR-Unterstützung" - -#~ msgid "An additional network will be created if you leave this unchecked." -#~ msgstr "" -#~ "Erzeugt ein zusätzliches Netzwerk wenn diese Option nicht ausgewählt ist" - -#~ msgid "Join Network: Settings" -#~ msgstr "Netzwerk beitreten: Einstellungen" - -#~ msgid "CPU" -#~ msgstr "Prozessor" - -#~ msgid "Port %d" -#~ msgstr "Port %d" - -#~ msgid "Port %d is untagged in multiple VLANs!" -#~ msgstr "Port %d ist untagged in mehreren VLANs!" - -#~ msgid "VLAN Interface" -#~ msgstr "VLAN Schnittstelle" diff --git a/modules/luci-base/po/el/base.po b/modules/luci-base/po/el/base.po index 60d62f3dd6..60566b8217 100644 --- a/modules/luci-base/po/el/base.po +++ b/modules/luci-base/po/el/base.po @@ -172,9 +172,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -211,9 +208,6 @@ msgstr "Αριθμός συσκευής ATM" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Συγκεντρωτής Πρόσβασης " @@ -326,11 +320,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -520,9 +509,6 @@ msgstr "Μη έγκυρη διεύθυνση!" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -710,9 +696,6 @@ msgstr "Συνδεδεμένος" msgid "Connection Limit" msgstr "Όριο Συνδέσεων" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Συνδέσεις" @@ -850,9 +833,6 @@ msgstr "Προεπιλεγμένη πύλη" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "Προεπιλεγμένη κατάσταση" @@ -1395,9 +1375,6 @@ msgstr "Κρέμασμα" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1513,9 +1490,6 @@ msgstr "Κατάσταση IPv6 WAN" msgid "IPv6 address" msgstr "Διεύθυνση IPv6" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2098,9 +2072,6 @@ msgstr "" msgid "NTP server candidates" msgstr "" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Όνομα" @@ -2278,12 +2249,6 @@ msgstr "Η επιλογή αφαιρέθηκε" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2745,9 +2710,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2830,9 +2792,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2859,14 +2818,6 @@ msgstr "Εκτέλεση ελέγχου συστήματος αρχείων" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2921,17 +2872,6 @@ msgstr "Απομόνωση Πελατών" msgid "Server Settings" msgstr "Ρυθμίσεις Εξυπηρετητή" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "Όνομα Υπηρεσίας" @@ -3024,9 +2964,6 @@ msgstr "Ταξινόμηση" msgid "Source" msgstr "Πηγή" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "" @@ -3311,11 +3248,6 @@ msgstr "" "να αποκτήσετε ξανά πρόσβαση στη συσκευή." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3467,15 +3399,6 @@ msgstr "Διεπαφή Τούνελ" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "Ισχύς Εκπομπής" @@ -3648,12 +3571,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "" @@ -3683,10 +3600,6 @@ msgid "" "and ad-hoc mode) to be installed." msgstr "" -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "" @@ -3710,12 +3623,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3858,9 +3765,6 @@ msgstr "" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "τοπικό αρχείο <abbr title=\"Domain Name System\">DNS</abbr>" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/en/base.po b/modules/luci-base/po/en/base.po index 5340e83eb4..5ff626f764 100644 --- a/modules/luci-base/po/en/base.po +++ b/modules/luci-base/po/en/base.po @@ -172,9 +172,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -211,9 +208,6 @@ msgstr "ATM device number" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Access Concentrator" @@ -317,11 +311,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -510,9 +499,6 @@ msgstr "Bad address specified!" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -697,9 +683,6 @@ msgstr "Connected" msgid "Connection Limit" msgstr "Connection Limit" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Connections" @@ -837,9 +820,6 @@ msgstr "Default gateway" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "Default state" @@ -1370,9 +1350,6 @@ msgstr "Hang Up" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1487,9 +1464,6 @@ msgstr "" msgid "IPv6 address" msgstr "" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2065,9 +2039,6 @@ msgstr "" msgid "NTP server candidates" msgstr "" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Name" @@ -2245,12 +2216,6 @@ msgstr "" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2711,9 +2676,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2796,9 +2758,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2824,14 +2783,6 @@ msgstr "" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2885,17 +2836,6 @@ msgstr "Separate Clients" msgid "Server Settings" msgstr "" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "" @@ -2988,9 +2928,6 @@ msgstr "" msgid "Source" msgstr "Source" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "" @@ -3271,11 +3208,6 @@ msgstr "" "settings." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3424,15 +3356,6 @@ msgstr "" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "" @@ -3605,12 +3528,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "" @@ -3642,10 +3559,6 @@ msgstr "" "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " "and ad-hoc mode) to be installed." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "" @@ -3669,12 +3582,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3815,9 +3722,6 @@ msgstr "" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "local <abbr title=\"Domain Name System\">DNS</abbr> file" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/es/base.po b/modules/luci-base/po/es/base.po index 66811e74ce..3a408e4c7c 100644 --- a/modules/luci-base/po/es/base.po +++ b/modules/luci-base/po/es/base.po @@ -174,9 +174,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -213,9 +210,6 @@ msgstr "Número de dispositivo ATM" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Concentrador de acceso" @@ -323,11 +317,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -516,9 +505,6 @@ msgstr "¡Dirección no válida!" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -706,9 +692,6 @@ msgstr "Conectado" msgid "Connection Limit" msgstr "Límite de conexión" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Conexiones" @@ -846,9 +829,6 @@ msgstr "Gateway por defecto" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "Estado por defecto" @@ -1391,9 +1371,6 @@ msgstr "Suspender" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1509,9 +1486,6 @@ msgstr "Estado de la WAN IPv6" msgid "IPv6 address" msgstr "Dirección IPv6" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2104,9 +2078,6 @@ msgstr "" msgid "NTP server candidates" msgstr "Servidores NTP a consultar" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Nombre" @@ -2283,12 +2254,6 @@ msgstr "Opción eliminada" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2765,9 +2730,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2850,9 +2812,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2878,14 +2837,6 @@ msgstr "Comprobar el sistema de ficheros" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2941,17 +2892,6 @@ msgstr "Aislar clientes" msgid "Server Settings" msgstr "Configuración del servidor" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "Nombre de servicio" @@ -3048,9 +2988,6 @@ msgstr "Ordenar" msgid "Source" msgstr "Origen" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "Especifica el directorio al que está enlazado el dispositivo" @@ -3367,11 +3304,6 @@ msgstr "" "conexión de su ordenador para poder acceder de nuevo al dispositivo." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3533,15 +3465,6 @@ msgstr "Interfaz de túnel" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "Potencia-TX" @@ -3721,12 +3644,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "Clase de vendedor a enviar cuando solicite DHCP" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "Verificar" @@ -3758,10 +3675,6 @@ msgstr "" "WPA-Encryption necesita que estén instalados wpa_supplicant (para el modo " "cliente o hostapd (para los modos AP y ad-hoc)." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "Esperando a que se realicen los cambios..." @@ -3785,12 +3698,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3933,9 +3840,6 @@ msgstr "Kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "Archvo <abbr title=\"Domain Name System\">DNS</abbr> local" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/fr/base.po b/modules/luci-base/po/fr/base.po index 17d1248518..777117f3e6 100644 --- a/modules/luci-base/po/fr/base.po +++ b/modules/luci-base/po/fr/base.po @@ -173,9 +173,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -216,9 +213,6 @@ msgstr "Numéro de périphérique ATM" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Concentrateur d'accès" @@ -329,11 +323,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -522,9 +511,6 @@ msgstr "Adresse spécifiée incorrecte!" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -713,9 +699,6 @@ msgstr "Connecté" msgid "Connection Limit" msgstr "Limite de connexion" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Connexions" @@ -853,9 +836,6 @@ msgstr "Passerelle par défaut" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "État par défaut" @@ -1402,9 +1382,6 @@ msgstr "Signal (HUP)" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1521,9 +1498,6 @@ msgstr "État IPv6 du WAN" msgid "IPv6 address" msgstr "Adresse IPv6" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2118,9 +2092,6 @@ msgstr "" msgid "NTP server candidates" msgstr "Serveurs NTP candidats" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Nom" @@ -2296,12 +2267,6 @@ msgstr "Option retirée" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2778,9 +2743,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2863,9 +2825,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2892,14 +2851,6 @@ msgstr "Faire une vérification du système de fichiers" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2955,17 +2906,6 @@ msgstr "Isoler les clients" msgid "Server Settings" msgstr "Paramètres du serveur" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "Nom du service" @@ -3063,9 +3003,6 @@ msgstr "Trier" msgid "Source" msgstr "Source" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "Indique le répertoire auquel le périphérique est rattaché" @@ -3380,11 +3317,6 @@ msgstr "" "settings." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3551,15 +3483,6 @@ msgstr "Interface du tunnel" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "Puissance d'émission" @@ -3740,12 +3663,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "Classe de fournisseur à envoyer dans les requêtes DHCP" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "Vérifier" @@ -3777,10 +3694,6 @@ msgstr "" "Le chiffrage WPA nécessite l'installation du paquet wpa_supplicant (en mode " "client) ou hostapd (en mode Point d'accès ou Ad-hoc)." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "En attente de l'application des changements..." @@ -3804,12 +3717,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3951,9 +3858,6 @@ msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "fichier de résolution local" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/he/base.po b/modules/luci-base/po/he/base.po index 793dc80715..5a179a3063 100644 --- a/modules/luci-base/po/he/base.po +++ b/modules/luci-base/po/he/base.po @@ -163,9 +163,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -203,9 +200,6 @@ msgstr "מס' התקן של ATM" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - #, fuzzy msgid "Access Concentrator" msgstr "מרכז גישות" @@ -316,11 +310,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -511,9 +500,6 @@ msgstr "פורטה כתובת לא תקינה" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -690,9 +676,6 @@ msgstr "מחובר" msgid "Connection Limit" msgstr "מגבלת חיבורים" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "חיבורים" @@ -830,9 +813,6 @@ msgstr "" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "" @@ -1355,9 +1335,6 @@ msgstr "" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1470,9 +1447,6 @@ msgstr "" msgid "IPv6 address" msgstr "" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2038,9 +2012,6 @@ msgstr "" msgid "NTP server candidates" msgstr "" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "שם" @@ -2212,12 +2183,6 @@ msgstr "" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2679,9 +2644,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2764,9 +2726,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2790,14 +2749,6 @@ msgstr "הרץ בדיקת מערכת קבצים" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2851,17 +2802,6 @@ msgstr "" msgid "Server Settings" msgstr "" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "" @@ -2957,9 +2897,6 @@ msgstr "מיין" msgid "Source" msgstr "מקור" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "" @@ -3234,11 +3171,6 @@ msgid "" msgstr "" msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3382,15 +3314,6 @@ msgstr "" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "עוצמת שידור" @@ -3563,12 +3486,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "" @@ -3598,10 +3515,6 @@ msgid "" "and ad-hoc mode) to be installed." msgstr "" -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "" @@ -3625,12 +3538,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3766,9 +3673,6 @@ msgstr "" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/hu/base.po b/modules/luci-base/po/hu/base.po index a900733ae7..f8cee36c43 100644 --- a/modules/luci-base/po/hu/base.po +++ b/modules/luci-base/po/hu/base.po @@ -170,9 +170,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -209,9 +206,6 @@ msgstr "ATM eszközszám" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Elérési központ" @@ -322,11 +316,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -515,9 +504,6 @@ msgstr "Hibás címet adott meg!" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -708,9 +694,6 @@ msgstr "Kapcsolódva" msgid "Connection Limit" msgstr "Kapcsolati korlát" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Kapcsolatok" @@ -848,9 +831,6 @@ msgstr "Alapértelmezett átjáró" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "Alapértelmezett állapot" @@ -1391,9 +1371,6 @@ msgstr "Befejezés" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1510,9 +1487,6 @@ msgstr "IPv6 WAN állapot" msgid "IPv6 address" msgstr "IPv6 cím" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2107,9 +2081,6 @@ msgstr "" msgid "NTP server candidates" msgstr "Kijelölt NTP kiszolgálók" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Név" @@ -2286,12 +2257,6 @@ msgstr "Beállítás eltávolítva" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2769,9 +2734,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2855,9 +2817,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2883,14 +2842,6 @@ msgstr "Fájlrendszer ellenőrzés futtatása" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2946,17 +2897,6 @@ msgstr "Kliensek szétválasztása" msgid "Server Settings" msgstr "Kiszolgáló beállításai" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "Szolgáltatás neve" @@ -3053,9 +2993,6 @@ msgstr "Sorbarendezés" msgid "Source" msgstr "Forrás" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "Megadja az eszköz csatlakozási könyvtárát." @@ -3369,11 +3306,6 @@ msgstr "" "megújítása." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3539,15 +3471,6 @@ msgstr "Tunnel interfész" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "Adóteljesítmény" @@ -3727,12 +3650,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "DHCP kérés során küldendő 'Vendor Class'" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "Ellenőrzés" @@ -3764,10 +3681,6 @@ msgstr "" "WPA titkosításhoz kliens módnál 'wpa_supplicant', hozzáférési pont illetve " "ad-hoc módnál 'hostapd' telepítése szükséges." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "Várakozás a változtatások alkalmazására..." @@ -3791,12 +3704,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3940,9 +3847,6 @@ msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "helyi <abbr title=\"Domain Name System\">DNS</abbr> fájl" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/it/base.po b/modules/luci-base/po/it/base.po index 7ea588b971..0bc37e4d0c 100644 --- a/modules/luci-base/po/it/base.po +++ b/modules/luci-base/po/it/base.po @@ -177,9 +177,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -216,9 +213,6 @@ msgstr "Numero dispositivo ATM " msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Accesso Concentratore" @@ -331,11 +325,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -524,9 +513,6 @@ msgstr "E' stato specificato un indirizzo errato!" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -713,9 +699,6 @@ msgstr "Connesso" msgid "Connection Limit" msgstr "Limite connessioni" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Connessioni" @@ -853,9 +836,6 @@ msgstr "Gateway predefinito" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "Stato Predefinito" @@ -1395,9 +1375,6 @@ msgstr "Hangup" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1515,9 +1492,6 @@ msgstr "Stato WAN IPv6" msgid "IPv6 address" msgstr "Indirizzi IPv6" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2107,9 +2081,6 @@ msgstr "" msgid "NTP server candidates" msgstr "Candidati server NTP" -msgid "NTP sync time-out" -msgstr "Sincronizzazione NTP scaduta" - msgid "Name" msgstr "Nome" @@ -2286,12 +2257,6 @@ msgstr "Opzione cancellata" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2759,9 +2724,6 @@ msgstr "Richiede indirizzo-IPv6" msgid "Request IPv6-prefix of length" msgstr "Richiede prefisso-IPv6 di lunghezza" -msgid "Require TLS" -msgstr "Richiede TLS" - msgid "Required" msgstr "Richiesto" @@ -2844,9 +2806,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2872,14 +2831,6 @@ msgstr "Esegui controllo del filesystem" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2933,17 +2884,6 @@ msgstr "Isola utenti" msgid "Server Settings" msgstr "Impostazioni Server" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "" @@ -3040,9 +2980,6 @@ msgstr "Ordina" msgid "Source" msgstr "Origine" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "Specifica la cartella a cui è collegato il dispositivo in" @@ -3341,11 +3278,6 @@ msgstr "" "settings." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3498,15 +3430,6 @@ msgstr "" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "" @@ -3688,12 +3611,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "Classe del Produttore da 'inviare al momento della richiesta DHCP" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "Verifica" @@ -3725,12 +3642,6 @@ msgstr "" "La crittografia WPA richiede wpa_supplicant (per la modalità client) o " "hostapd (per AP e modalità ad hoc) per essere installato." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" -"Attendi sincro NTP quei dati secondi, immetti 0 per disabilitare l'attesa " -"(opzionale)" - msgid "Waiting for changes to be applied..." msgstr "In attesa delle modifiche da applicare ..." @@ -3754,12 +3665,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3904,9 +3809,6 @@ msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "File <abbr title=\"Sistema Nome Dominio\">DNS</abbr> locale" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" @@ -3982,99 +3884,3 @@ msgstr "Sì" msgid "« Back" msgstr "« Indietro" -#~ msgid "Apply" -#~ msgstr "Applica" - -#~ msgid "Applying changes" -#~ msgstr "Applica modifiche" - -#~ msgid "Configuration applied." -#~ msgstr "Configurazione salvata." - -#~ msgid "Save & Apply" -#~ msgstr "Salva & Applica" - -#~ msgid "There are no pending changes to apply!" -#~ msgstr "Non ci sono cambiamenti pendenti da applicare!" - -#~ msgid "Action" -#~ msgstr "Azione" - -#~ msgid "Buttons" -#~ msgstr "Pulsanti" - -#~ msgid "Handler" -#~ msgstr "Gestore" - -#~ msgid "Maximum hold time" -#~ msgstr "Tempo massimo di attesa" - -#~ msgid "Minimum hold time" -#~ msgstr "Velocità minima" - -#~ msgid "Specifies the button state to handle" -#~ msgstr "Specifica lo stato del pulsante da gestire" - -#~ msgid "Leasetime" -#~ msgstr "Tempo di contratto" - -#, fuzzy -#~ msgid "automatic" -#~ msgstr "statico" - -#~ msgid "AR Support" -#~ msgstr "Supporto AR" - -#~ msgid "Atheros 802.11%s Wireless Controller" -#~ msgstr "Dispositivo Wireless Atheros 802.11%s" - -#~ msgid "Background Scan" -#~ msgstr "Scansione in background" - -#~ msgid "Compression" -#~ msgstr "Compressione" - -#~ msgid "Disable HW-Beacon timer" -#~ msgstr "Disabilita Timer Beacon HW" - -#~ msgid "Do not send probe responses" -#~ msgstr "Disabilita Probe-Responses" - -#~ msgid "Fast Frames" -#~ msgstr "Frame veloci" - -#~ msgid "Maximum Rate" -#~ msgstr "Velocità massima" - -#~ msgid "Minimum Rate" -#~ msgstr "Velocità minima" - -#~ msgid "Multicast Rate" -#~ msgstr "Velocità multicast" - -#~ msgid "Separate WDS" -#~ msgstr "WDS separati" - -#~ msgid "Static WDS" -#~ msgstr "WDS statico" - -#~ msgid "Turbo Mode" -#~ msgstr "Modalità turbo" - -#~ msgid "XR Support" -#~ msgstr "Supporto XR" - -#~ msgid "An additional network will be created if you leave this unchecked." -#~ msgstr "Sarà creata una rete aggiuntiva se lasci questo senza spunta." - -#~ msgid "Join Network: Settings" -#~ msgstr "Aggiunta Rete: Impostazioni" - -#~ msgid "CPU" -#~ msgstr "CPU" - -#~ msgid "Port %d" -#~ msgstr "Porta %d" - -#~ msgid "VLAN Interface" -#~ msgstr "Interfaccia VLAN" diff --git a/modules/luci-base/po/ja/base.po b/modules/luci-base/po/ja/base.po index c0cbb6b6d9..ed36969885 100644 --- a/modules/luci-base/po/ja/base.po +++ b/modules/luci-base/po/ja/base.po @@ -175,9 +175,6 @@ msgstr "A43C + J43 + A43 + V43" msgid "ADSL" msgstr "ADSL" -msgid "AICCU (SIXXS)" -msgstr "AICCU (SIXXS)" - msgid "ANSI T1.413" msgstr "ANSI T1.413" @@ -211,9 +208,6 @@ msgstr "ATMデバイス番号" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Access Concentrator" @@ -321,11 +315,6 @@ msgstr "" msgid "Allowed IPs" msgstr "許可されるIP" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "常にデフォルト ルーターとして通知する" @@ -516,9 +505,6 @@ msgstr "無効なアドレスです!" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -716,9 +702,6 @@ msgstr "接続中" msgid "Connection Limit" msgstr "接続制限" -msgid "Connection to server fails when TLS cannot be used" -msgstr "TLSが使用できないとき、サーバーへの接続は失敗します。" - msgid "Connections" msgstr "ネットワーク接続" @@ -727,8 +710,8 @@ msgid "" "changes. You might need to reconnect if you modified network related " "settings such as the IP address or wireless security credentials." msgstr "" -"設定の変更を適用後、デバイスへのアクセスを回復できませんでした。もし IP アドレスや" -"無線のセキュリティ認証情報などのネットワーク関連の設定を変更した場合、" +"設定の変更を適用後、デバイスへのアクセスを回復できませんでした。もし IP アド" +"レスや無線のセキュリティ認証情報などのネットワーク関連の設定を変更した場合、" "再接続が必要かもしれません。" msgid "Country" @@ -863,9 +846,6 @@ msgstr "デフォルト ゲートウェイ" msgid "Default is stateless + stateful" msgstr "デフォルトは ステートレス + ステートフル です。" -msgid "Default route" -msgstr "デフォルト ルート" - msgid "Default state" msgstr "標準状態" @@ -1409,9 +1389,6 @@ msgstr "再起動" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "ハートビート" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1526,9 +1503,6 @@ msgstr "IPv6 WAN ステータス" msgid "IPv6 address" msgstr "IPv6 アドレス" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2123,9 +2097,6 @@ msgstr "NT ドメイン" msgid "NTP server candidates" msgstr "NTPサーバー候補" -msgid "NTP sync time-out" -msgstr "NTP 同期タイムアウト" - msgid "Name" msgstr "名前" @@ -2305,12 +2276,6 @@ msgstr "削除されるオプション" msgid "Optional" msgstr "オプション" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2793,9 +2758,6 @@ msgstr "IPv6-アドレスのリクエスト" msgid "Request IPv6-prefix of length" msgstr "リクエストするIPv6-プレフィクス長" -msgid "Require TLS" -msgstr "TLSが必要" - msgid "Required" msgstr "必須" @@ -2880,9 +2842,6 @@ msgstr "" msgid "Route type" msgstr "ルート タイプ" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "ルーター アドバタイズメント-サービス" @@ -2908,14 +2867,6 @@ msgstr "ファイルシステムチェックを行う" msgid "SHA256" msgstr "SHA256" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "SNR" @@ -2971,17 +2922,6 @@ msgstr "クライアントの分離" msgid "Server Settings" msgstr "サーバー設定" -msgid "Server password" -msgstr "サーバー パスワード" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "サーバー ユーザー名" - msgid "Service Name" msgstr "サービス名" @@ -3077,9 +3017,6 @@ msgstr "ソート" msgid "Source" msgstr "送信元" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "デバイスが接続するディレクトリを設定します" @@ -3295,8 +3232,8 @@ msgstr "" "す。これは、安全上の理由によりロールバックされる設定に起因するものです。それ" "でも設定の変更が正しいと思う場合は、チェックなしの変更の適用を行ってくださ" "い。もしくは、再度適用を試行する前にこの警告を除去して設定内容の編集を行う" -"か、現在動作している設定状況を維持するために未適用の変更を取り消してくだ" -"さい。" +"か、現在動作している設定状況を維持するために未適用の変更を取り消してくださ" +"い。" msgid "" "The device file of the memory or partition (<abbr title=\"for example\">e.g." @@ -3388,11 +3325,6 @@ msgstr "" "ればならない場合があります。" msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3560,15 +3492,6 @@ msgstr "トンネルインターフェース" msgid "Tunnel Link" msgstr "トンネルリンク" -msgid "Tunnel broker protocol" -msgstr "トンネルブローカー プロトコル" - -msgid "Tunnel setup server" -msgstr "トンネルセットアップ サーバー" - -msgid "Tunnel type" -msgstr "トンネルタイプ" - msgid "Tx-Power" msgstr "送信電力" @@ -3749,12 +3672,6 @@ msgstr "ベンダー" msgid "Vendor Class to send when requesting DHCP" msgstr "DHCPリクエスト送信時のベンダークラスを設定" -msgid "Verbose" -msgstr "詳細" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "確認" @@ -3787,10 +3704,6 @@ msgstr "" "hostapd (アクセスポイント及びアドホック) がインストールされている必要がありま" "す。" -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "変更を適用中です..." @@ -3814,12 +3727,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "帯域幅" @@ -3964,9 +3871,6 @@ msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "ローカル <abbr title=\"Domain Name System\">DNS</abbr>ファイル" -msgid "minimum 1280, maximum 1480" -msgstr "最小値 1280、最大値 1480" - msgid "minutes" msgstr "分" diff --git a/modules/luci-base/po/ko/base.po b/modules/luci-base/po/ko/base.po index 7f1bf22e03..50dc84e4d1 100644 --- a/modules/luci-base/po/ko/base.po +++ b/modules/luci-base/po/ko/base.po @@ -168,9 +168,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -204,9 +201,6 @@ msgstr "" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "" @@ -311,11 +305,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -504,9 +493,6 @@ msgstr "" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -693,9 +679,6 @@ msgstr "연결 시간" msgid "Connection Limit" msgstr "" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "연결" @@ -835,9 +818,6 @@ msgstr "" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "기본 상태" @@ -1368,9 +1348,6 @@ msgstr "" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1486,9 +1463,6 @@ msgstr "IPv6 WAN 상태" msgid "IPv6 address" msgstr "" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2056,9 +2030,6 @@ msgstr "" msgid "NTP server candidates" msgstr "NTP 서버 목록" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "이름" @@ -2236,12 +2207,6 @@ msgstr "삭제된 option" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2706,9 +2671,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2791,9 +2753,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2819,14 +2778,6 @@ msgstr "" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2880,17 +2831,6 @@ msgstr "" msgid "Server Settings" msgstr "서버 설정" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "" @@ -2983,9 +2923,6 @@ msgstr "순서" msgid "Source" msgstr "" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "" @@ -3269,11 +3206,6 @@ msgid "" msgstr "" msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3426,15 +3358,6 @@ msgstr "" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "" @@ -3615,12 +3538,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "DHCP 요청시 전송할 Vendor Class" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "" @@ -3650,10 +3567,6 @@ msgid "" "and ad-hoc mode) to be installed." msgstr "" -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "변경 사항이 적용되기를 기다리는 중입니다..." @@ -3677,12 +3590,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3824,9 +3731,6 @@ msgstr "" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "local <abbr title=\"Domain Name System\">DNS</abbr> 파일" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/ms/base.po b/modules/luci-base/po/ms/base.po index cadaf9b3b2..3f73db88f4 100644 --- a/modules/luci-base/po/ms/base.po +++ b/modules/luci-base/po/ms/base.po @@ -165,9 +165,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -201,9 +198,6 @@ msgstr "" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "" @@ -306,11 +300,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -499,9 +488,6 @@ msgstr "" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -675,9 +661,6 @@ msgstr "" msgid "Connection Limit" msgstr "Sambungan Batas" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "" @@ -813,9 +796,6 @@ msgstr "" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "" @@ -1340,9 +1320,6 @@ msgstr "Menutup" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1457,9 +1434,6 @@ msgstr "" msgid "IPv6 address" msgstr "" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2036,9 +2010,6 @@ msgstr "" msgid "NTP server candidates" msgstr "" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Nama" @@ -2215,12 +2186,6 @@ msgstr "" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2680,9 +2645,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2765,9 +2727,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2793,14 +2752,6 @@ msgstr "" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2854,17 +2805,6 @@ msgstr "Pisahkan Pelanggan" msgid "Server Settings" msgstr "" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "" @@ -2957,9 +2897,6 @@ msgstr "" msgid "Source" msgstr "Sumber" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "" @@ -3242,11 +3179,6 @@ msgstr "" "bergantung pada tetapan anda." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3397,15 +3329,6 @@ msgstr "" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "" @@ -3578,12 +3501,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "" @@ -3615,10 +3532,6 @@ msgstr "" "WPA-Enkripsi memerlukan pemohan wpa (untuk mod pelanggan) atau hostapd " "(untuk AP dan mod ad-hoc) yang akan dipasangkan." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "" @@ -3642,12 +3555,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3783,9 +3690,6 @@ msgstr "" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "Fail DNS tempatan" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/no/base.po b/modules/luci-base/po/no/base.po index 600d007247..d938c540fc 100644 --- a/modules/luci-base/po/no/base.po +++ b/modules/luci-base/po/no/base.po @@ -167,9 +167,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -210,9 +207,6 @@ msgstr "<abbr title=\"Asynchronous Transfer Mode\">ATM</abbr> enhetsnummer" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Tilgangskonsentrator" @@ -315,11 +309,6 @@ msgstr "Tillat oppstrøms svar i 127.0.0.0/8 nettet, f.eks for RBL tjenester" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -508,9 +497,6 @@ msgstr "Ugyldig adresse oppgitt!" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -697,9 +683,6 @@ msgstr "Tilkoblet" msgid "Connection Limit" msgstr "Tilkoblingsgrense (antall)" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Tilkoblinger" @@ -837,9 +820,6 @@ msgstr "Standard gateway" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "Standard tilstand" @@ -1377,9 +1357,6 @@ msgstr "Slå av" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1496,9 +1473,6 @@ msgstr "IPv6 WAN Status" msgid "IPv6 address" msgstr "IPv6 adresse" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2081,9 +2055,6 @@ msgstr "" msgid "NTP server candidates" msgstr "NTP server kandidater" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Navn" @@ -2261,12 +2232,6 @@ msgstr "Innstilling fjernet" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2743,9 +2708,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2828,9 +2790,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2856,14 +2815,6 @@ msgstr "Kjør filsystem sjekk" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2919,17 +2870,6 @@ msgstr "Separerte Klienter" msgid "Server Settings" msgstr "Server Innstillinger" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "Tjeneste navn" @@ -3026,9 +2966,6 @@ msgstr "Sortering" msgid "Source" msgstr "Kilde" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "Hvor lagrings enheten blir tilsluttet filsystemet (f.eks. /mnt/sda1)" @@ -3338,11 +3275,6 @@ msgstr "" "datamaskinen din for å nå enheten på nytt. (avhengig av innstillingene dine)" msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3504,15 +3436,6 @@ msgstr "Tunnel grensesnitt" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "Tx-Styrke" @@ -3692,12 +3615,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "Leverandør klasse som sendes ved DHCP spørring" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "Bekreft" @@ -3729,10 +3646,6 @@ msgstr "" "WPA-Kryptering krever at wpa_supplicant (for klient-modus) eller hostapd " "(for AP og ad-hoc-modus) er installert." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "Venter på at endringer utføres..." @@ -3756,12 +3669,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3905,9 +3812,6 @@ msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "lokal <abbr title=\"Domain Navn System\">DNS</abbr>-fil" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/pl/base.po b/modules/luci-base/po/pl/base.po index 390e489e29..bf43720174 100644 --- a/modules/luci-base/po/pl/base.po +++ b/modules/luci-base/po/pl/base.po @@ -162,8 +162,8 @@ msgid "" "<br/>Note: you need to manually restart the cron service if the crontab file " "was empty before editing." msgstr "" -"<br/>Uwaga: musisz ręcznie zrestartować usługę cron, jeśli plik crontab " -"był pusty przed edycją." +"<br/>Uwaga: musisz ręcznie zrestartować usługę cron, jeśli plik crontab był " +"pusty przed edycją." msgid "A43C + J43 + A43" msgstr "" @@ -174,9 +174,6 @@ msgstr "" msgid "ADSL" msgstr "ADSL" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -205,9 +202,9 @@ msgid "" "Linux network interfaces which can be used in conjunction with DHCP or PPP " "to dial into the provider network." msgstr "" -"Mosty ATM eksponują enkapsulowaną sieć Ethernet w połączeniach AAL5 jako wirtualne " -"interfejsy sieciowe systemu Linux, które mogą być używane w połączeniu z protokołem " -"DHCP lub PPP w celu polączenia się z siecią dostawcy." +"Mosty ATM eksponują enkapsulowaną sieć Ethernet w połączeniach AAL5 jako " +"wirtualne interfejsy sieciowe systemu Linux, które mogą być używane w " +"połączeniu z protokołem DHCP lub PPP w celu polączenia się z siecią dostawcy." msgid "ATM device number" msgstr "Numer urządzenia ATM" @@ -215,9 +212,6 @@ msgstr "Numer urządzenia ATM" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - # co to takiego? msgid "Access Concentrator" msgstr "Koncentrator dostępowy ATM" @@ -290,7 +284,8 @@ msgstr "Alarm" msgid "" "Allocate IP addresses sequentially, starting from the lowest available " "address" -msgstr "Przydziel sekwencyjnie adresy IP, zaczynając od najmniejszego dostępnego" +msgstr "" +"Przydziel sekwencyjnie adresy IP, zaczynając od najmniejszego dostępnego" msgid "Allocate IP sequentially" msgstr "Przydzielaj adresy IP po kolei" @@ -311,7 +306,8 @@ msgid "Allow localhost" msgstr "Pozwól tylko sobie (localhost)" msgid "Allow remote hosts to connect to local SSH forwarded ports" -msgstr "Zezwalaj zdalnym hostom na łączenie się z lokalnie przekazywanymi portami SSH" +msgstr "" +"Zezwalaj zdalnym hostom na łączenie się z lokalnie przekazywanymi portami SSH" msgid "Allow root logins with password" msgstr "Zezwól na logowanie roota przy pomocy hasła" @@ -327,11 +323,6 @@ msgstr "" msgid "Allowed IPs" msgstr "Dozwolone adresy IP" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "Zawsze rozgłaszaj domyślny router" @@ -410,11 +401,11 @@ msgstr "Ustawienia anteny" msgid "Any zone" msgstr "Dowolna strefa" -msgid "Apply" -msgstr "Zatwierdź" +msgid "Apply request failed with status <code>%h</code>" +msgstr "" -msgid "Applying changes" -msgstr "Wprowadzam zmiany" +msgid "Apply unchecked" +msgstr "" msgid "" "Assign a part of given length of every public IPv6-prefix to this interface" @@ -521,9 +512,6 @@ msgstr "Wprowadzono zły adres" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -596,12 +584,20 @@ msgstr "Zmiany" msgid "Changes applied." msgstr "Zmiany zostały zastosowane." +msgid "Changes have been reverted." +msgstr "" + msgid "Changes the administrator password for accessing the device" msgstr "Zmienia hasło administratora" msgid "Channel" msgstr "Kanał" +msgid "" +"Channel %d is not available in the %s regulatory domain and has been auto-" +"adjusted to %d." +msgstr "" + msgid "Check" msgstr "Sprawdź" @@ -678,17 +674,24 @@ msgid "" "workaround might cause interoperability issues and reduced robustness of key " "negotiation especially in environments with heavy traffic load." msgstr "" -"Komplikuje atak ponownej instalacji klucza po stronie klienta, wyłączając retransmisję ramek klucza EAPOL, które są używane do instalowania kluczy. To obejście może powodować problemy z interoperacyjnością i zmniejszoną odporność kluczowych negocjacji, szczególnie w środowiskach o dużym natężeniu ruchu." +"Komplikuje atak ponownej instalacji klucza po stronie klienta, wyłączając " +"retransmisję ramek klucza EAPOL, które są używane do instalowania kluczy. To " +"obejście może powodować problemy z interoperacyjnością i zmniejszoną " +"odporność kluczowych negocjacji, szczególnie w środowiskach o dużym " +"natężeniu ruchu." msgid "Configuration" msgstr "Konfiguracja" -msgid "Configuration applied." -msgstr "Konfiguracja została zastosowana." - msgid "Configuration files will be kept." msgstr "Pliki konfiguracyjne zostaną zachowane." +msgid "Configuration has been applied." +msgstr "" + +msgid "Configuration has been rolled back!" +msgstr "" + msgid "Confirmation" msgstr "Potwierdzenie" @@ -701,12 +704,15 @@ msgstr "Połączony" msgid "Connection Limit" msgstr "Limit połączeń" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Połączenia" +msgid "" +"Could not regain access to the device after applying the configuration " +"changes. You might need to reconnect if you modified network related " +"settings such as the IP address or wireless security credentials." +msgstr "" + msgid "Country" msgstr "Kraj" @@ -836,9 +842,6 @@ msgstr "Brama domyślna" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "Stan domyślny" @@ -881,6 +884,9 @@ msgstr "Urządzenie jest uruchamiane ponownie ..." msgid "Device unreachable" msgstr "Urządzenie nieosiągalne" +msgid "Device unreachable!" +msgstr "" + msgid "Diagnostics" msgstr "Diagnostyka" @@ -915,6 +921,9 @@ msgstr "Wyłączone (domyślnie)" msgid "Discard upstream RFC1918 responses" msgstr "Odrzuć wychodzące odpowiedzi RFC1918" +msgid "Dismiss" +msgstr "" + msgid "Displaying only packages containing" msgstr "Pokazuję tylko paczki zawierające" @@ -1037,7 +1046,9 @@ msgstr "Włącz" msgid "" "Enable <abbr title=\"Internet Group Management Protocol\">IGMP</abbr> " "snooping" -msgstr "Włącz nasłuchiwanie <abbr title=\"Internet Group Management Protocol\">IGMP</abbr>" +msgstr "" +"Włącz nasłuchiwanie <abbr title=\"Internet Group Management Protocol\">IGMP</" +"abbr>" msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>" msgstr "Włącz <abbr title=\"Spanning Tree Protocol\">STP</abbr>" @@ -1102,8 +1113,9 @@ msgstr "Włącz nasłuchiwanie IGMP na tym moście" msgid "" "Enables fast roaming among access points that belong to the same Mobility " "Domain" -msgstr "Aktywuje szybki roaming pomiędzy punktami dostępowymi, które należą " -"do tej samej domeny" +msgstr "" +"Aktywuje szybki roaming pomiędzy punktami dostępowymi, które należą do tej " +"samej domeny" msgid "Enables the Spanning Tree Protocol on this bridge" msgstr "" @@ -1182,6 +1194,9 @@ msgstr "" msgid "FT protocol" msgstr "" +msgid "Failed to confirm apply within %ds, waiting for rollback…" +msgstr "" + msgid "File" msgstr "Plik" @@ -1378,9 +1393,6 @@ msgstr "Rozłącz" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1500,9 +1512,6 @@ msgstr "Status WAN IPv6" msgid "IPv6 address" msgstr "Adres IPv6" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -1623,7 +1632,8 @@ msgid "Install" msgstr "Instaluj" msgid "Install iputils-traceroute6 for IPv6 traceroute" -msgstr "Zainstaluj iputils-traceroute6 w celu skorzystania z traceroute dla iPv6" +msgstr "" +"Zainstaluj iputils-traceroute6 w celu skorzystania z traceroute dla iPv6" msgid "Install package %q" msgstr "Instaluj pakiet %q" @@ -1958,8 +1968,8 @@ msgid "" "Make sure to clone the root filesystem using something like the commands " "below:" msgstr "" -"Upewnij się, że klonujesz główny system plików, używając czegoś podobnego " -"do poleceń poniżej:" +"Upewnij się, że klonujesz główny system plików, używając czegoś podobnego do " +"poleceń poniżej:" msgid "Manual" msgstr "" @@ -2096,9 +2106,6 @@ msgstr "" msgid "NTP server candidates" msgstr "Lista serwerów NTP" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Nazwa" @@ -2222,6 +2229,9 @@ msgstr "" msgid "Obfuscated Password" msgstr "" +msgid "Obtain IPv6-Address" +msgstr "" + msgid "Off-State Delay" msgstr "Zwłoka wyłączenia" @@ -2272,12 +2282,6 @@ msgstr "Usunięto wartość" msgid "Optional" msgstr "Opcjonalny" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2755,9 +2759,6 @@ msgstr "Zażądaj adresu IPv6" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "Wymagaj TLS" - msgid "Required" msgstr "Wymagany" @@ -2816,6 +2817,15 @@ msgstr "Odsłoń/Ukryj hasło" msgid "Revert" msgstr "Przywróć" +msgid "Revert changes" +msgstr "" + +msgid "Revert request failed with status <code>%h</code>" +msgstr "" + +msgid "Reverting configuration…" +msgstr "" + msgid "Root" msgstr "Root" @@ -2831,9 +2841,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2860,14 +2867,6 @@ msgstr "Sprawdź czy system plików nie zawiera błędów" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "SNR" @@ -2895,9 +2894,6 @@ msgstr "Zapisz" msgid "Save & Apply" msgstr "Zapisz i zastosuj" -msgid "Save & Apply" -msgstr "Zapisz i zastosuj" - msgid "Scan" msgstr "Skanuj" @@ -2927,17 +2923,6 @@ msgstr "Rozdziel klientów" msgid "Server Settings" msgstr "Ustawienia serwera" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "Nazwa serwisu" @@ -2951,8 +2936,8 @@ msgid "" "Set interface properties regardless of the link carrier (If set, carrier " "sense events do not invoke hotplug handlers)." msgstr "" -"Ustaw właściwości interfejsu, niezależnie od operatora łącza (nie wpływa" -" na programy operatora które ustanawiają połączenie)." +"Ustaw właściwości interfejsu, niezależnie od operatora łącza (nie wpływa na " +"programy operatora które ustanawiają połączenie)." #, fuzzy msgid "Set up Time Synchronization" @@ -3036,9 +3021,6 @@ msgstr "Posortuj" msgid "Source" msgstr "Źródło" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "Podaje katalog do którego jest podłączone urządzenie" @@ -3080,6 +3062,9 @@ msgstr "Uruchomienie" msgid "Start priority" msgstr "Priorytet uruchomienia" +msgid "Starting configuration apply…" +msgstr "" + msgid "Startup" msgstr "Autostart" @@ -3247,6 +3232,16 @@ msgid "The configuration file could not be loaded due to the following error:" msgstr "" msgid "" +"The device could not be reached within %d seconds after applying the pending " +"changes, which caused the configuration to be rolled back for safety " +"reasons. If you believe that the configuration changes are correct " +"nonetheless, perform an unchecked configuration apply. Alternatively, you " +"can dismiss this warning and edit changes before attempting to apply again, " +"or revert all pending changes to keep the currently working configuration " +"state." +msgstr "" + +msgid "" "The device file of the memory or partition (<abbr title=\"for example\">e.g." "</abbr> <code>/dev/sda1</code>)" msgstr "" @@ -3273,9 +3268,6 @@ msgstr "" "upewnić się, że został przesłany poprawnie.<br /> Wciśnij \"Wykonaj\" aby " "kontynuować aktualizację." -msgid "The following changes have been committed" -msgstr "Następujące zmiany zostały zatwierdzone" - msgid "The following changes have been reverted" msgstr "Następujące zmiany zostały odrzucone" @@ -3346,11 +3338,6 @@ msgstr "" "się do urządzenia." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3360,8 +3347,8 @@ msgstr "" msgid "There are no active leases." msgstr "Brak aktywnych dzierżaw." -msgid "There are no pending changes to apply!" -msgstr "Brak oczekujących zmian do zastosowania!" +msgid "There are no changes to apply." +msgstr "" msgid "There are no pending changes to revert!" msgstr "Brak oczekujących zmian do przywrócenia!" @@ -3471,8 +3458,8 @@ msgid "" "To restore configuration files, you can upload a previously generated backup " "archive here." msgstr "" -"Aby przywrócić pliki konfiguracyjne, możesz tutaj przesłać wcześniej utworzoną " -"kopię zapasową." +"Aby przywrócić pliki konfiguracyjne, możesz tutaj przesłać wcześniej " +"utworzoną kopię zapasową." msgid "Tone" msgstr "" @@ -3516,15 +3503,6 @@ msgstr "Interfejs tunelu" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "Typ tunelu" - msgid "Tx-Power" msgstr "Moc nadawania" @@ -3582,8 +3560,9 @@ msgid "" "compatible firmware image)." msgstr "" "Prześlij tutaj obraz zgodny z funkcją sysupgrade, aby zastąpić aktualnie " -"działające opragramowanie. Zaznacz opcję \"Zachowaj ustawienia\", aby zachować " -"bieżącą konfigurację (wymagany obraz zgodny z bieżącym opragramowaniem)." +"działające opragramowanie. Zaznacz opcję \"Zachowaj ustawienia\", aby " +"zachować bieżącą konfigurację (wymagany obraz zgodny z bieżącym " +"opragramowaniem)." msgid "Upload archive..." msgstr "Załaduj archiwum..." @@ -3705,12 +3684,6 @@ msgstr "Producent" msgid "Vendor Class to send when requesting DHCP" msgstr "Klasa producenta do wysłania podczas żądania DHCP" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "Zweryfikuj" @@ -3739,12 +3712,8 @@ msgid "" "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " "and ad-hoc mode) to be installed." msgstr "" -"Kodowanie WPA wymaga zainstalowanych modułów wpa_supplicant (tryb " -"klienta) lub hostapd (tryb AP lub ad-hoc)" - -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" +"Kodowanie WPA wymaga zainstalowanych modułów wpa_supplicant (tryb klienta) " +"lub hostapd (tryb AP lub ad-hoc)" msgid "Waiting for changes to be applied..." msgstr "Trwa wprowadzenie zmian..." @@ -3752,6 +3721,9 @@ msgstr "Trwa wprowadzenie zmian..." msgid "Waiting for command to complete..." msgstr "Trwa wykonanie polecenia..." +msgid "Waiting for configuration to get applied… %ds" +msgstr "" + msgid "Waiting for device..." msgstr "Oczekiwanie na urządzenie..." @@ -3759,20 +3731,15 @@ msgid "Warning" msgstr "Ostrzeżenie" msgid "Warning: There are unsaved changes that will get lost on reboot!" -msgstr "Ostrzeżenie: Istnieją niezapisane zmiany, które zostaną utracone " -"po ponownym uruchomieniu urządzenia!" +msgstr "" +"Ostrzeżenie: Istnieją niezapisane zmiany, które zostaną utracone po ponownym " +"uruchomieniu urządzenia!" msgid "" "When using a PSK, the PMK can be generated locally without inter AP " "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "Szerokość" @@ -3839,9 +3806,9 @@ msgid "" "upgrade it to at least version 7 or use another browser like Firefox, Opera " "or Safari." msgstr "" -"Twój Internet Explorer jest za stary, aby poprawnie wyświetlić tę stronę" -"zaktualizuj go do wersji co najmniej 7 lub użyj innej przeglądarki, takiej " -"jak Firefox, Opera czy Safari". +"Twój Internet Explorer jest za stary, aby poprawnie wyświetlić tę " +"stronę zaktualizuj go do wersji co najmniej 7 lub użyj innej przeglądarki, " +"takiej jak Firefox, Opera czy Safari." msgid "any" msgstr "dowolny" @@ -3919,9 +3886,6 @@ msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "lokalny plik <abbr title=\"Domain Name System\">DNS</abbr>" -msgid "minimum 1280, maximum 1480" -msgstr "minimum 1280, maksimum 1480" - msgid "minutes" msgstr "minuty" @@ -3998,101 +3962,3 @@ msgstr "tak" msgid "« Back" msgstr "« Wróć" -#~ msgid "Action" -#~ msgstr "Akcja" - -#~ msgid "Buttons" -#~ msgstr "Przyciski" - -#~ msgid "Handler" -#~ msgstr "Uchwyt" - -#~ msgid "Maximum hold time" -#~ msgstr "Maksymalny czas podtrzymania" - -#~ msgid "Minimum hold time" -#~ msgstr "Minimalny czas podtrzymania" - -#~ msgid "Path to executable which handles the button event" -#~ msgstr "" -#~ "Ścieżka do pliku wykonywalnego, który obsługuje zdarzenie dla danego " -#~ "przycisku" - -#~ msgid "Specifies the button state to handle" -#~ msgstr "Określa zachowanie w zależności od stanu przycisku" - -#~ msgid "This page allows the configuration of custom button actions" -#~ msgstr "" -#~ "Poniższa strona umożliwia konfigurację działania niestandardowych " -#~ "przycisków" - -#~ msgid "Leasetime" -#~ msgstr "Czas dzierżawy" - -# Wydaje mi się że brakuje litery R... -#~ msgid "AR Support" -#~ msgstr "Wsparcie dla ARP" - -#~ msgid "Atheros 802.11%s Wireless Controller" -#~ msgstr "Bezprzewodowy kontroler Atheros 802.11%s" - -#~ msgid "Background Scan" -#~ msgstr "Skanowanie w tle" - -#~ msgid "Compression" -#~ msgstr "Kompresja" - -#~ msgid "Disable HW-Beacon timer" -#~ msgstr "Wyłącz zegar HW-Beacon" - -#~ msgid "Do not send probe responses" -#~ msgstr "Nie wysyłaj ramek probe response" - -#~ msgid "Fast Frames" -#~ msgstr "Szybkie ramki (Fast Frames)" - -#~ msgid "Maximum Rate" -#~ msgstr "Maksymalna Szybkość" - -#~ msgid "Minimum Rate" -#~ msgstr "Minimalna Szybkość" - -#~ msgid "Multicast Rate" -#~ msgstr "Szybkość Multicast`u" - -#~ msgid "Outdoor Channels" -#~ msgstr "Kanały zewnętrzne" - -#~ msgid "Regulatory Domain" -#~ msgstr "Domena regulacji" - -#~ msgid "Separate WDS" -#~ msgstr "Rozdziel WDS" - -#~ msgid "Static WDS" -#~ msgstr "Statyczny WDS" - -#~ msgid "Turbo Mode" -#~ msgstr "Tryb Turbo" - -#~ msgid "XR Support" -#~ msgstr "Wsparcie XR" - -#~ msgid "An additional network will be created if you leave this unchecked." -#~ msgstr "" -#~ "Zostanie utworzona dodatkowa sieć jeśli zostawisz tą opcję niezaznaczoną." - -#~ msgid "Join Network: Settings" -#~ msgstr "Przyłącz do sieci: Ustawienia" - -#~ msgid "CPU" -#~ msgstr "CPU" - -#~ msgid "Port %d" -#~ msgstr "Port %d" - -#~ msgid "Port %d is untagged in multiple VLANs!" -#~ msgstr "Port %d jest nietagowany w wielu VLAN`ach!" - -#~ msgid "VLAN Interface" -#~ msgstr "Interfejs VLAN" diff --git a/modules/luci-base/po/pt-br/base.po b/modules/luci-base/po/pt-br/base.po index bbfb8cf8d9..49b1494326 100644 --- a/modules/luci-base/po/pt-br/base.po +++ b/modules/luci-base/po/pt-br/base.po @@ -185,11 +185,6 @@ msgstr "" "<abbr title=\"Assymetrical Digital Subscriber Line/Linha Digital Assimétrica " "para Assinante\">ADSL</abbr>" -msgid "AICCU (SIXXS)" -msgstr "" -"<abbr title=\"Automatic IPv6 Connectivity Client Utility/Utilitário Cliente " -"de Conectividade IPv6 Automática\">AICCU (SIXXS)</abbr>" - msgid "ANSI T1.413" msgstr "ANSI T1.413" @@ -232,9 +227,6 @@ msgstr "Número do dispositivo ATM" msgid "ATU-C System Vendor ID" msgstr "Identificador de" -msgid "AYIYA" -msgstr "AYIYA" - msgid "Access Concentrator" msgstr "Concentrador de Acesso" @@ -348,13 +340,6 @@ msgstr "" msgid "Allowed IPs" msgstr "Endereços IP autorizados" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" -"Veja também a <a href=\"https://www.sixxs.net/faq/connectivity/?" -"faq=comparison\">Comparação de Tunelamentos</a> em SIXXS" - msgid "Always announce default router" msgstr "Sempre anuncie o roteador padrão" @@ -552,9 +537,6 @@ msgstr "Endereço especificado está incorreto!" msgid "Band" msgstr "Banda" -msgid "Behind NAT" -msgstr "Atrás da NAT" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -748,9 +730,6 @@ msgstr "Conectado" msgid "Connection Limit" msgstr "Limite de conexão" -msgid "Connection to server fails when TLS cannot be used" -msgstr "A conexão para este servidor falhará quando o TLS não puder ser usado" - msgid "Connections" msgstr "Conexões" @@ -890,9 +869,6 @@ msgstr "Roteador Padrão" msgid "Default is stateless + stateful" msgstr "O padrão é sem estado + com estado" -msgid "Default route" -msgstr "Rota padrão" - msgid "Default state" msgstr "Estado padrão" @@ -1452,9 +1428,6 @@ msgstr "" "Erros de Código de Erro de Cabeçalho (<abbr title=\"Header Error Code\">HEC</" "abbr>)" -msgid "Heartbeat" -msgstr "Pulso de vida" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1579,9 +1552,6 @@ msgstr "Estado IPv6 da WAN" msgid "IPv6 address" msgstr "Endereço IPv6" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "Endereços IPv6 delegados para o ponta local do túnel (opcional)" - msgid "IPv6 assignment hint" msgstr "Sugestão de atribuição IPv6" @@ -2205,9 +2175,6 @@ msgstr "Domínio NT" msgid "NTP server candidates" msgstr "Candidatos a servidor NTP" -msgid "NTP sync time-out" -msgstr "Tempo limite da sincronia do NTP" - msgid "Name" msgstr "Nome" @@ -2388,13 +2355,6 @@ msgstr "Opção removida" msgid "Optional" msgstr "Opcional" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" -"Opcional, especifique para sobrescrever o servidor padrão (tic.sixxs.net)" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "Opcional, para usar quando a conta SIXXS tem mais de um túnel" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2885,9 +2845,6 @@ msgstr "Solicita endereço IPv6" msgid "Request IPv6-prefix of length" msgstr "Solicita prefixo IPv6 de tamanho" -msgid "Require TLS" -msgstr "Requer TLS" - msgid "Required" msgstr "Necessário" @@ -2976,9 +2933,6 @@ msgstr "Roteie Andereços IP Autorizados" msgid "Route type" msgstr "Tipo de rota" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "Prefixo roteável IPv6 para interfaces internas" - msgid "Router Advertisement-Service" msgstr "Serviço de Anúncio de Roteador" @@ -3005,16 +2959,6 @@ msgstr "Execute a verificação do sistema de arquivos " msgid "SHA256" msgstr "SHA256" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" -"O SIXXS suporta somente TIC. Use o 6in4 para túneis estáticos usando o " -"protocolo IP 41 (RFC4213)" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "Identificador do SIXXS[/Identificador do Túnel]" - msgid "SNR" msgstr "SNR" @@ -3070,19 +3014,6 @@ msgstr "Isolar Clientes" msgid "Server Settings" msgstr "Configurações do Servidor" -msgid "Server password" -msgstr "Senha do servidor" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" -"Senha do servidor. Informe a senha para este túnel quando o nome do usuário " -"contiver o identificador do túnel" - -msgid "Server username" -msgstr "Usuário do servidor" - msgid "Service Name" msgstr "Nome do Serviço" @@ -3180,9 +3111,6 @@ msgstr "Ordenar" msgid "Source" msgstr "Origem" -msgid "Source routing" -msgstr "Roteamento pela origem" - msgid "Specifies the directory the device is attached to" msgstr "Especifica o diretório que o dispositivo está conectado" @@ -3506,13 +3434,6 @@ msgstr "" "computador para poder conectar novamente ao roteador." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" -"O final do túnel está atrás de um NAT. Por padrão será desabilitado e " -"somente se aplica a AYIYA" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3683,15 +3604,6 @@ msgstr "Interface de Tunelamento" msgid "Tunnel Link" msgstr "Enlace do túnel" -msgid "Tunnel broker protocol" -msgstr "Protocolo do agente do túnel" - -msgid "Tunnel setup server" -msgstr "Servidor de configuração do túnel" - -msgid "Tunnel type" -msgstr "Tipo de túnel" - msgid "Tx-Power" msgstr "Potência de transmissão" @@ -3878,12 +3790,6 @@ msgstr "Fabricante" msgid "Vendor Class to send when requesting DHCP" msgstr "Classe do fabricante para enviar quando requisitar o DHCP" -msgid "Verbose" -msgstr "Detalhado" - -msgid "Verbose logging by aiccu daemon" -msgstr "Habilite registros detalhados do serviço AICCU" - msgid "Verify" msgstr "Verificar" @@ -3915,12 +3821,6 @@ msgstr "" "A cifragem WPA requer a instalação do wpa_supplicant (para modo cliente) ou " "do hostapd (para modo AP ou ad-hoc)." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" -"Espere esta quantidade de segundos pela sincronia do NTP. Definindo como 0 " -"desabilita a espera (opcional)" - msgid "Waiting for changes to be applied..." msgstr "Esperando a aplicação das mudanças..." @@ -3944,12 +3844,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "Se deve criar uma rota padrão IPv6 sobre o túnel" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "Se deve rotear somente pacotes de prefixos delegados" - msgid "Width" msgstr "Largura" @@ -4098,9 +3992,6 @@ msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "" "Arquivo local de <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>" -msgid "minimum 1280, maximum 1480" -msgstr "mínimo 1280, máximo 1480" - msgid "minutes" msgstr "minutos" @@ -4176,135 +4067,3 @@ msgstr "sim" msgid "« Back" msgstr "« Voltar" - -#~ msgid "Apply" -#~ msgstr "Aplicar" - -#~ msgid "Applying changes" -#~ msgstr "Aplicar as alterações" - -#~ msgid "Configuration applied." -#~ msgstr "Configuração aplicada." - -#~ msgid "Save & Apply" -#~ msgstr "Save & Aplicar" - -#~ msgid "The following changes have been committed" -#~ msgstr "As seguintes mudanças foram aplicadas" - -#~ msgid "There are no pending changes to apply!" -#~ msgstr "Não existem modificações pendentes para aplicar!" - -#~ msgid "Action" -#~ msgstr "Ação" - -#~ msgid "Buttons" -#~ msgstr "Botões" - -# Não sei que contexto isto está sendo usado -#~ msgid "Handler" -#~ msgstr "Responsável" - -# Desconheço o uso -#~ msgid "Maximum hold time" -#~ msgstr "Tempo máximo de espera" - -#~ msgid "Minimum hold time" -#~ msgstr "Tempo mínimo de espera" - -#~ msgid "Path to executable which handles the button event" -#~ msgstr "Caminho para o executável que trata o evento do botão" - -#~ msgid "Specifies the button state to handle" -#~ msgstr "Especifica o estado do botão para ser tratado" - -#~ msgid "This page allows the configuration of custom button actions" -#~ msgstr "" -#~ "Esta página permite a configuração de ações personalizadas para os botões" - -#~ msgid "Leasetime" -#~ msgstr "Tempo de atribuição do DHCP" - -#~ msgid "Optional." -#~ msgstr "Opcional." - -#~ msgid "navigation Navigation" -#~ msgstr "navegação Navegação" - -#~ msgid "skiplink1 Skip to navigation" -#~ msgstr "skiplink1 Pular para a navegação" - -#~ msgid "skiplink2 Skip to content" -#~ msgstr "skiplink2 Pular para o conteúdo" - -#~ msgid "AuthGroup" -#~ msgstr "Grupo de Autenticação" - -#~ msgid "automatic" -#~ msgstr "automático" - -#~ msgid "AR Support" -#~ msgstr "Suporte AR" - -#~ msgid "Atheros 802.11%s Wireless Controller" -#~ msgstr "Controlador Wireless Atheros 802.11%s" - -#~ msgid "Background Scan" -#~ msgstr "Busca em Segundo Plano" - -#~ msgid "Compression" -#~ msgstr "Compressão" - -#~ msgid "Disable HW-Beacon timer" -#~ msgstr "Desativar temporizador de Beacon de Hardware" - -#~ msgid "Do not send probe responses" -#~ msgstr "Não enviar respostas de exames" - -#~ msgid "Fast Frames" -#~ msgstr "Quadros Rápidos" - -#~ msgid "Maximum Rate" -#~ msgstr "Taxa Máxima" - -#~ msgid "Minimum Rate" -#~ msgstr "Taxa Mínima" - -#~ msgid "Multicast Rate" -#~ msgstr "Taxa de Multicast" - -#~ msgid "Outdoor Channels" -#~ msgstr "Canais para externo" - -#~ msgid "Regulatory Domain" -#~ msgstr "Domínio Regulatório" - -#~ msgid "Separate WDS" -#~ msgstr "Separar WDS" - -#~ msgid "Static WDS" -#~ msgstr "WDS Estático" - -#~ msgid "Turbo Mode" -#~ msgstr "Modo Turbo" - -#~ msgid "XR Support" -#~ msgstr "Suporte a XR" - -#~ msgid "An additional network will be created if you leave this unchecked." -#~ msgstr "Uma rede adicional será criada se você deixar isto desmarcado." - -#~ msgid "Join Network: Settings" -#~ msgstr "Conectar à Rede: Configurações" - -#~ msgid "CPU" -#~ msgstr "CPU" - -#~ msgid "Port %d" -#~ msgstr "Porta %d" - -#~ msgid "Port %d is untagged in multiple VLANs!" -#~ msgstr "Porta %d está sem etiqueta para mútliplas VLANs!" - -#~ msgid "VLAN Interface" -#~ msgstr "Interface VLAN" diff --git a/modules/luci-base/po/pt/base.po b/modules/luci-base/po/pt/base.po index 7e191809b8..a05bfc1cfc 100644 --- a/modules/luci-base/po/pt/base.po +++ b/modules/luci-base/po/pt/base.po @@ -177,9 +177,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -216,9 +213,6 @@ msgstr "Número de Dispositivo ATM" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Concentrador de Acesso" @@ -328,11 +322,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -521,9 +510,6 @@ msgstr "Endereço mal especificado!" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -710,9 +696,6 @@ msgstr "Ligado" msgid "Connection Limit" msgstr "Limite de Ligações" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Ligações" @@ -850,9 +833,6 @@ msgstr "Gateway predefinido" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "Estado predefinido" @@ -1395,9 +1375,6 @@ msgstr "Suspender" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1517,9 +1494,6 @@ msgstr "Estado WAN IPv6" msgid "IPv6 address" msgstr "Endereço IPv6" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2105,9 +2079,6 @@ msgstr "" msgid "NTP server candidates" msgstr "Candidatos a servidor NTP" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Nome" @@ -2285,12 +2256,6 @@ msgstr "Opção removida" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2762,9 +2727,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2847,9 +2809,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2876,14 +2835,6 @@ msgstr "Correr uma verificação do sistema de ficheiros" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2937,17 +2888,6 @@ msgstr "Isolar Clientes" msgid "Server Settings" msgstr "" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "Nome do Serviço" @@ -3041,9 +2981,6 @@ msgstr "Ordenar" msgid "Source" msgstr "Origem" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "" @@ -3345,11 +3282,6 @@ msgstr "" "para poder ligar novamente ao router." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3505,15 +3437,6 @@ msgstr "Interface de Túnel" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "Potência de Tx" @@ -3686,12 +3609,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "Verificar" @@ -3723,10 +3640,6 @@ msgstr "" "A encriptação-WPA necessita do wpa_supplicant (para modo cliente) ou do " "hostapd (para modo AP ou ah-hoc) esteja instalado." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "A aguardar que as mudanças sejam aplicadas..." @@ -3750,12 +3663,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3901,9 +3808,6 @@ msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "" "Ficheiro local de <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/ro/base.po b/modules/luci-base/po/ro/base.po index a7d45e6f6d..1b7c612b22 100644 --- a/modules/luci-base/po/ro/base.po +++ b/modules/luci-base/po/ro/base.po @@ -168,9 +168,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -207,9 +204,6 @@ msgstr "ATM numar echipament" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Concentrator de Access " @@ -314,11 +308,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -507,9 +496,6 @@ msgstr "Adresa specificata gresit !" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -685,9 +671,6 @@ msgstr "Conectat" msgid "Connection Limit" msgstr "Limita de conexiune" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Conexiuni" @@ -823,9 +806,6 @@ msgstr "" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "Stare implicita" @@ -1347,9 +1327,6 @@ msgstr "" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1464,9 +1441,6 @@ msgstr "Statusul IPv6 pe WAN" msgid "IPv6 address" msgstr "Adresa IPv6" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2035,9 +2009,6 @@ msgstr "" msgid "NTP server candidates" msgstr "" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Nume" @@ -2209,12 +2180,6 @@ msgstr "Optiunea eliminata" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2675,9 +2640,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2760,9 +2722,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2786,14 +2745,6 @@ msgstr "" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2847,17 +2798,6 @@ msgstr "" msgid "Server Settings" msgstr "Setarile serverului" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "Nume serviciu" @@ -2951,9 +2891,6 @@ msgstr "" msgid "Source" msgstr "Sursa" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "" @@ -3224,11 +3161,6 @@ msgid "" msgstr "" msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3373,15 +3305,6 @@ msgstr "Interfata de tunel" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "Puterea TX" @@ -3554,12 +3477,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "" @@ -3591,10 +3508,6 @@ msgstr "" "Criptarea WPA necesita wpa_supplicant (pentru modul client) sau hostapd " "(pentru modul AP sau ad-hoc) instalate." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "" @@ -3618,12 +3531,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3759,9 +3666,6 @@ msgstr "" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/ru/base.po b/modules/luci-base/po/ru/base.po index 91aacdeb49..2514084b76 100644 --- a/modules/luci-base/po/ru/base.po +++ b/modules/luci-base/po/ru/base.po @@ -177,9 +177,6 @@ msgstr "A43C + J43 + A43 + V43" msgid "ADSL" msgstr "ADSL" -msgid "AICCU (SIXXS)" -msgstr "AICCU (SIXXS)" - msgid "ANSI T1.413" msgstr "ANSI T1.413" @@ -216,9 +213,6 @@ msgstr "ATM номер устройства" msgid "ATU-C System Vendor ID" msgstr "ATU-C System Vendor ID" -msgid "AYIYA" -msgstr "AYIYA" - msgid "Access Concentrator" msgstr "Концентратор доступа" @@ -330,13 +324,6 @@ msgstr "" msgid "Allowed IPs" msgstr "Разрешенные IP-адреса" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" -"Также смотрите <a href=\"https://www.sixxs.net/faq/connectivity/?" -"faq=comparison\">Tunneling Comparison</a> on SIXXS" - msgid "Always announce default router" msgstr "Объявлять всегда, как дефолтный маршрутизатор" @@ -537,9 +524,6 @@ msgstr "Указан неправильный адрес!" msgid "Band" msgstr "Диапазон" -msgid "Behind NAT" -msgstr "За NAT-ом" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -739,9 +723,6 @@ msgstr "Подключен" msgid "Connection Limit" msgstr "Ограничение соединений" -msgid "Connection to server fails when TLS cannot be used" -msgstr "Связь с сервером прерывается, когда TLS не может быть использован" - msgid "Connections" msgstr "Соединения" @@ -881,9 +862,6 @@ msgstr "Шлюз по умолчанию" msgid "Default is stateless + stateful" msgstr "Значение по умолчанию - 'stateless + stateful'." -msgid "Default route" -msgstr "Маршрут по умолчанию" - msgid "Default state" msgstr "Начальное состояние" @@ -1431,9 +1409,6 @@ msgstr "Перезапустить" msgid "Header Error Code Errors (HEC)" msgstr "Ошибки кода ошибки заголовка (HEC)" -msgid "Heartbeat" -msgstr "Heartbeat" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1550,10 +1525,6 @@ msgstr "Состояние IPv6 WAN" msgid "IPv6 address" msgstr "IPv6-адрес" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" -"IPv6-адрес, делегированный локальной конечной точке туннеля (необязательно)." - msgid "IPv6 assignment hint" msgstr "IPv6 подсказка присвоения" @@ -2163,9 +2134,6 @@ msgstr "NT домен" msgid "NTP server candidates" msgstr "Список NTP-серверов" -msgid "NTP sync time-out" -msgstr "NTP синхронизация времени ожидания" - msgid "Name" msgstr "Имя" @@ -2343,16 +2311,6 @@ msgstr "Опция удалена" msgid "Optional" msgstr "Необязательно" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" -"Необязательно. Укажите, чтобы переопределить дефолтный сервер (tic.sixxs." -"net)." - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" -"Необязательно. Используется, когда учетная запись SIXXS имеет более одного " -"туннеля." - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2844,9 +2802,6 @@ msgstr "Запрос IPv6 адреса" msgid "Request IPv6-prefix of length" msgstr "Запрос IPv6 префикс длины" -msgid "Require TLS" -msgstr "Требовать TLS" - msgid "Required" msgstr "Требовать" @@ -2937,9 +2892,6 @@ msgstr "Маршрут разрешенный для IP адресов" msgid "Route type" msgstr "Тип маршрута" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "Префикс маршрутизации IPv6 для интерфейсов внутренней сети" - msgid "Router Advertisement-Service" msgstr "Доступные<br />режимы работы" @@ -2965,16 +2917,6 @@ msgstr "Проверить" msgid "SHA256" msgstr "SHA256" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" -"SIXXS поддерживает только TIC, для статических туннелей с использованием IP-" -"протокола 41 (RFC4213) используется вместо 6in4." - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "SIXXS-управление[/Туннель-ID]" - msgid "SNR" msgstr "SNR" @@ -3030,19 +2972,6 @@ msgstr "Разделять клиентов" msgid "Server Settings" msgstr "Настройки сервера" -msgid "Server password" -msgstr "Пароль доступа к серверу" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" -"Пароль сервера. Введите пароль из тоннеля, когда имя пользователя содержит " -"ID туннеля." - -msgid "Server username" -msgstr "Логин доступа к серверу" - msgid "Service Name" msgstr "Имя службы" @@ -3139,9 +3068,6 @@ msgstr "Сортировка" msgid "Source" msgstr "Источник" -msgid "Source routing" -msgstr "маршрутизация от источника" - msgid "Specifies the directory the device is attached to" msgstr "Папка, к которой монтируется раздел устройства." @@ -3458,13 +3384,6 @@ msgstr "" "в зависимости от настроек." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" -"Конечная точка туннеля находится за NAT, по умолчанию отключена и " -"применяется только к AYIYA." - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3634,15 +3553,6 @@ msgstr "Интерфейс туннеля" msgid "Tunnel Link" msgstr "Ссылка на туннель" -msgid "Tunnel broker protocol" -msgstr "Протокол посредника туннеля" - -msgid "Tunnel setup server" -msgstr "Сервер настройки туннеля" - -msgid "Tunnel type" -msgstr "Тип туннеля" - msgid "Tx-Power" msgstr "Мощность передатчика" @@ -3828,12 +3738,6 @@ msgid "Vendor Class to send when requesting DHCP" msgstr "" "Класс производителя (Vendor class), который отправлять при DHCP-запросах" -msgid "Verbose" -msgstr "Verbose" - -msgid "Verbose logging by aiccu daemon" -msgstr "Verbose ведение журнала демоном aiccu" - msgid "Verify" msgstr "Проверить" @@ -3865,12 +3769,6 @@ msgstr "" "Необходимо установить wpa_supplicant (режим клиента) или hostapd (режим " "точки доступа или ad-hoc) для поддержки шифрования WPA." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" -"Задать время ожидания синхронизации NTP, установка значения - '0', отключает " -"ожидание (необязательно)." - msgid "Waiting for changes to be applied..." msgstr "Ожидание применения изменений..." @@ -3896,12 +3794,6 @@ msgid "" "communications" msgstr "При использовании PSK, PMK может быть создан локально, без AP в связи." -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "Создание маршрута по умолчанию IPv6 через туннель." - -msgid "Whether to route only packets from delegated prefixes" -msgstr "Маршрутизация только пакетов из делегированных префиксов." - msgid "Width" msgstr "Ширина" @@ -4048,9 +3940,6 @@ msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "Локальный <abbr title=\"Служба доменных имён\">DNS</abbr>-файл." -msgid "minimum 1280, maximum 1480" -msgstr "минимум 1280, максимум 1480" - msgid "minutes" msgstr "минут(ы)" @@ -4125,21 +4014,3 @@ msgstr "да" msgid "« Back" msgstr "« Назад" - -#~ msgid "Apply" -#~ msgstr "Принять" - -#~ msgid "Applying changes" -#~ msgstr "Применение изменений" - -#~ msgid "Configuration applied." -#~ msgstr "Изменение настроек config файлов." - -#~ msgid "Save & Apply" -#~ msgstr "Сохранить и применить" - -#~ msgid "The following changes have been committed" -#~ msgstr "Ваши настройки были применены." - -#~ msgid "There are no pending changes to apply!" -#~ msgstr "Нет изменений, которые можно применить!" diff --git a/modules/luci-base/po/sk/base.po b/modules/luci-base/po/sk/base.po index 7f3d249e15..e7e302b1b0 100644 --- a/modules/luci-base/po/sk/base.po +++ b/modules/luci-base/po/sk/base.po @@ -159,9 +159,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -195,9 +192,6 @@ msgstr "" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "" @@ -300,11 +294,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -493,9 +482,6 @@ msgstr "" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -668,9 +654,6 @@ msgstr "" msgid "Connection Limit" msgstr "" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "" @@ -806,9 +789,6 @@ msgstr "" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "" @@ -1327,9 +1307,6 @@ msgstr "" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1442,9 +1419,6 @@ msgstr "" msgid "IPv6 address" msgstr "" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2010,9 +1984,6 @@ msgstr "" msgid "NTP server candidates" msgstr "" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "" @@ -2184,12 +2155,6 @@ msgstr "" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2648,9 +2613,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2733,9 +2695,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2759,14 +2718,6 @@ msgstr "" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2820,17 +2771,6 @@ msgstr "" msgid "Server Settings" msgstr "" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "" @@ -2923,9 +2863,6 @@ msgstr "" msgid "Source" msgstr "" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "" @@ -3196,11 +3133,6 @@ msgid "" msgstr "" msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3343,15 +3275,6 @@ msgstr "" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "" @@ -3524,12 +3447,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "" @@ -3559,10 +3476,6 @@ msgid "" "and ad-hoc mode) to be installed." msgstr "" -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "" @@ -3586,12 +3499,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3727,9 +3634,6 @@ msgstr "" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/sv/base.po b/modules/luci-base/po/sv/base.po index 770fca2e53..dc68fdc368 100644 --- a/modules/luci-base/po/sv/base.po +++ b/modules/luci-base/po/sv/base.po @@ -167,9 +167,6 @@ msgstr "A43C + J43 + A43 + V43" msgid "ADSL" msgstr "ADSL" -msgid "AICCU (SIXXS)" -msgstr "AICCU (SIXXS)" - msgid "ANSI T1.413" msgstr "ANSI T1.413" @@ -203,9 +200,6 @@ msgstr "" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "AYIYA" - msgid "Access Concentrator" msgstr "" @@ -311,11 +305,6 @@ msgstr "" msgid "Allowed IPs" msgstr "Tillåtna IP-adresser" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -504,9 +493,6 @@ msgstr "Fel adress angiven!" msgid "Band" msgstr "Band" -msgid "Behind NAT" -msgstr "Bakom NAT" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -682,9 +668,6 @@ msgstr "Ansluten" msgid "Connection Limit" msgstr "Anslutningsgräns" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Anslutningar" @@ -820,9 +803,6 @@ msgstr "Standard gateway" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "Standardrutt" - msgid "Default state" msgstr "" @@ -1347,9 +1327,6 @@ msgstr "Lägg på" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "Hjärtslag" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1462,9 +1439,6 @@ msgstr "" msgid "IPv6 address" msgstr "IPv6-adress" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2031,9 +2005,6 @@ msgstr "NT-domän" msgid "NTP server candidates" msgstr "NTP-serverkandidater" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Namn" @@ -2205,12 +2176,6 @@ msgstr "Alternativet togs bort" msgid "Optional" msgstr "Valfri" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2671,9 +2636,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "Kräv TLS" - msgid "Required" msgstr "Krävs!" @@ -2756,9 +2718,6 @@ msgstr "" msgid "Route type" msgstr "Typ av rutt" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2782,14 +2741,6 @@ msgstr "Kör filsystemskontrollen" msgid "SHA256" msgstr "SHA256" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "SNR" @@ -2843,17 +2794,6 @@ msgstr "Separera klienter" msgid "Server Settings" msgstr "Inställningar för server" -msgid "Server password" -msgstr "Lösenordet för servern" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "Användarnamnet för servern" - msgid "Service Name" msgstr "Namn på tjänst" @@ -2946,9 +2886,6 @@ msgstr "Sortera" msgid "Source" msgstr "Källa" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "" @@ -3219,11 +3156,6 @@ msgid "" msgstr "" msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3370,15 +3302,6 @@ msgstr "Tunnelgränssnitt" msgid "Tunnel Link" msgstr "Tunnel-länk" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "Tunnel-typ" - msgid "Tx-Power" msgstr "" @@ -3551,12 +3474,6 @@ msgstr "Tillverkare" msgid "Vendor Class to send when requesting DHCP" msgstr "" -msgid "Verbose" -msgstr "Utförlig" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "Verkställ" @@ -3586,10 +3503,6 @@ msgid "" "and ad-hoc mode) to be installed." msgstr "" -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "Väntar på att ändringarna ska tillämpas..." @@ -3614,12 +3527,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "Bredd" @@ -3760,9 +3667,6 @@ msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "lokal <abbr title=\"Domain Name System\">DNS</abbr>-fil" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "minuter" @@ -3838,26 +3742,3 @@ msgstr "ja" msgid "« Back" msgstr "« Bakåt" -#~ msgid "Apply" -#~ msgstr "Verkställ" - -#~ msgid "Applying changes" -#~ msgstr "Verkställer ändringar" - -#~ msgid "Configuration applied." -#~ msgstr "Konfigurationen tillämpades" - -#~ msgid "Save & Apply" -#~ msgstr "Spara & Verkställ" - -#~ msgid "The following changes have been committed" -#~ msgstr "Följande ändringar har skickats in" - -#~ msgid "There are no pending changes to apply!" -#~ msgstr "Det finns inga pendlande ändringar att verkställa!" - -#~ msgid "Action" -#~ msgstr "Åtgärd" - -#~ msgid "Buttons" -#~ msgstr "Knappar" diff --git a/modules/luci-base/po/templates/base.pot b/modules/luci-base/po/templates/base.pot index ebbe6c6dcf..b944566c09 100644 --- a/modules/luci-base/po/templates/base.pot +++ b/modules/luci-base/po/templates/base.pot @@ -152,9 +152,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -188,9 +185,6 @@ msgstr "" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "" @@ -293,11 +287,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -486,9 +475,6 @@ msgstr "" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -661,9 +647,6 @@ msgstr "" msgid "Connection Limit" msgstr "" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "" @@ -799,9 +782,6 @@ msgstr "" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "" @@ -1320,9 +1300,6 @@ msgstr "" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1435,9 +1412,6 @@ msgstr "" msgid "IPv6 address" msgstr "" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2003,9 +1977,6 @@ msgstr "" msgid "NTP server candidates" msgstr "" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "" @@ -2177,12 +2148,6 @@ msgstr "" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2641,9 +2606,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2726,9 +2688,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2752,14 +2711,6 @@ msgstr "" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2813,17 +2764,6 @@ msgstr "" msgid "Server Settings" msgstr "" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "" @@ -2916,9 +2856,6 @@ msgstr "" msgid "Source" msgstr "" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "" @@ -3189,11 +3126,6 @@ msgid "" msgstr "" msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3336,15 +3268,6 @@ msgstr "" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "" @@ -3517,12 +3440,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "" @@ -3552,10 +3469,6 @@ msgid "" "and ad-hoc mode) to be installed." msgstr "" -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "" @@ -3579,12 +3492,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3720,9 +3627,6 @@ msgstr "" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/tr/base.po b/modules/luci-base/po/tr/base.po index aba91126d6..cfa7cd3c48 100644 --- a/modules/luci-base/po/tr/base.po +++ b/modules/luci-base/po/tr/base.po @@ -39,13 +39,13 @@ msgid "-- custom --" msgstr "-- özel --" msgid "-- match by device --" -msgstr "" +msgstr "-- cihaza göre eşleştir --" msgid "-- match by label --" -msgstr "" +msgstr "-- etikete göre eşleştir --" msgid "-- match by uuid --" -msgstr "" +msgstr "-- uuid'e göre eşleştir --" msgid "1 Minute Load:" msgstr "1 Dakikalık Yük:" @@ -54,7 +54,7 @@ msgid "15 Minute Load:" msgstr "15 Dakikalık Yük:" msgid "4-character hexadecimal ID" -msgstr "" +msgstr "4 karakterli HEX ID" msgid "464XLAT (CLAT)" msgstr "" @@ -168,9 +168,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -204,9 +201,6 @@ msgstr "" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "" @@ -313,11 +307,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -435,7 +424,7 @@ msgid "Auto Refresh" msgstr "Otomatik Yenileme" msgid "Automatic" -msgstr "" +msgstr "Otomatik" msgid "Automatic Homenet (HNCP)" msgstr "" @@ -474,7 +463,7 @@ msgid "BR / DMR / AFTR" msgstr "" msgid "BSSID" -msgstr "" +msgstr "BSSID" msgid "Back" msgstr "Geri" @@ -506,9 +495,6 @@ msgstr "" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -560,19 +546,19 @@ msgid "CA certificate; if empty it will be saved after the first connection." msgstr "" msgid "CPU usage (%)" -msgstr "" +msgstr "CPU kullanımı (%)" msgid "Cancel" -msgstr "" +msgstr "Vazgeç" msgid "Category" -msgstr "" +msgstr "Kategori" msgid "Chain" -msgstr "" +msgstr "Zincir" msgid "Changes" -msgstr "" +msgstr "Değişiklikler" msgid "Changes applied." msgstr "" @@ -584,7 +570,7 @@ msgid "Changes the administrator password for accessing the device" msgstr "" msgid "Channel" -msgstr "" +msgstr "Kanal" msgid "" "Channel %d is not available in the %s regulatory domain and has been auto-" @@ -681,9 +667,6 @@ msgstr "" msgid "Connection Limit" msgstr "" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "" @@ -819,9 +802,6 @@ msgstr "" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "" @@ -1340,9 +1320,6 @@ msgstr "" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1455,9 +1432,6 @@ msgstr "" msgid "IPv6 address" msgstr "" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -1847,10 +1821,10 @@ msgid "Logging" msgstr "" msgid "Login" -msgstr "" +msgstr "Oturum Aç" msgid "Logout" -msgstr "" +msgstr "Oturumu Kapat" msgid "Loss of Signal Seconds (LOSS)" msgstr "" @@ -2023,9 +1997,6 @@ msgstr "" msgid "NTP server candidates" msgstr "" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "" @@ -2197,12 +2168,6 @@ msgstr "" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2661,9 +2626,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2693,13 +2655,13 @@ msgid "" msgstr "" msgid "Reset" -msgstr "" +msgstr "Sıfırla" msgid "Reset Counters" -msgstr "" +msgstr "Sayaçları Sıfırla" msgid "Reset to defaults" -msgstr "" +msgstr "Varsayılanlara dön" msgid "Resolv and Hosts Files" msgstr "" @@ -2708,22 +2670,22 @@ msgid "Resolve file" msgstr "" msgid "Restart" -msgstr "" +msgstr "Tekrar başlat" msgid "Restart Firewall" msgstr "" msgid "Restore backup" -msgstr "" +msgstr "Yedeklemeyi geri yükle" msgid "Reveal/hide password" msgstr "" msgid "Revert" -msgstr "" +msgstr "Dönmek" msgid "Revert changes" -msgstr "" +msgstr "Değişiklikleri geri al" msgid "Revert request failed with status <code>%h</code>" msgstr "" @@ -2732,7 +2694,7 @@ msgid "Reverting configuration…" msgstr "" msgid "Root" -msgstr "" +msgstr "Kök" msgid "Root directory for files served via TFTP" msgstr "" @@ -2744,19 +2706,16 @@ msgid "Route Allowed IPs" msgstr "" msgid "Route type" -msgstr "" - -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" +msgstr "Yönlendirme Tipi" msgid "Router Advertisement-Service" msgstr "" msgid "Router Password" -msgstr "" +msgstr "Yönlendirici Parolası" msgid "Routes" -msgstr "" +msgstr "Yönlendirmeler" msgid "" "Routes specify over which interface and gateway a certain host or network " @@ -2764,60 +2723,52 @@ msgid "" msgstr "" msgid "Run a filesystem check before mounting the device" -msgstr "" +msgstr "Cihazı bağlamadan önce bir dosya sistemi kontrolü yapın" msgid "Run filesystem check" -msgstr "" +msgstr "Dosya sistemi kontrolünü çalıştır" msgid "SHA256" -msgstr "" - -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" +msgstr "SHA256" msgid "SNR" -msgstr "" +msgstr "SNR" msgid "SSH Access" -msgstr "" +msgstr "SSH Erişimi" msgid "SSH server address" -msgstr "" +msgstr "SSH sunucu adresi" msgid "SSH server port" -msgstr "" +msgstr "SSH sunucu portu" msgid "SSH username" -msgstr "" +msgstr "SSH kullanıcı adı" msgid "SSH-Keys" msgstr "" msgid "SSID" -msgstr "" +msgstr "SSID" msgid "Save" -msgstr "" +msgstr "Kaydet" msgid "Save & Apply" -msgstr "" +msgstr "Kaydet & Uygula" msgid "Scan" -msgstr "" +msgstr "Tara" msgid "Scheduled Tasks" -msgstr "" +msgstr "Zamanlanmış Görevler" msgid "Section added" -msgstr "" +msgstr "Bölüm eklendi" msgid "Section removed" -msgstr "" +msgstr "Bölüm kaldırıldı" msgid "See \"mount\" manpage for details" msgstr "" @@ -2833,17 +2784,6 @@ msgstr "" msgid "Server Settings" msgstr "" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "" @@ -2851,7 +2791,7 @@ msgid "Service Type" msgstr "" msgid "Services" -msgstr "" +msgstr "Servisler" msgid "" "Set interface properties regardless of the link carrier (If set, carrier " @@ -2880,25 +2820,25 @@ msgid "Shutdown this network" msgstr "" msgid "Signal" -msgstr "" +msgstr "Sinyal" msgid "Signal Attenuation (SATN)" -msgstr "" +msgstr "Sinyal Zayıflama (SATN)" msgid "Signal:" -msgstr "" +msgstr "Sinyal:" msgid "Size" -msgstr "" +msgstr "Boyut" msgid "Size (.ipk)" -msgstr "" +msgstr "Boyut (.ipk)" msgid "Size of DNS query cache" msgstr "" msgid "Skip" -msgstr "" +msgstr "Atla" msgid "Skip to content" msgstr "" @@ -2910,7 +2850,7 @@ msgid "Slot time" msgstr "" msgid "Software" -msgstr "" +msgstr "Yazılım" msgid "Software VLAN" msgstr "" @@ -2931,13 +2871,10 @@ msgid "" msgstr "" msgid "Sort" -msgstr "" +msgstr "Sıralama" msgid "Source" -msgstr "" - -msgid "Source routing" -msgstr "" +msgstr "Kaynak" msgid "Specifies the directory the device is attached to" msgstr "" @@ -2972,7 +2909,7 @@ msgid "Specify the secret encryption key here." msgstr "" msgid "Start" -msgstr "" +msgstr "Başlat" msgid "Start priority" msgstr "" @@ -3005,16 +2942,16 @@ msgid "" msgstr "" msgid "Status" -msgstr "" +msgstr "Durum" msgid "Stop" -msgstr "" +msgstr "Durdur" msgid "Strict order" msgstr "" msgid "Submit" -msgstr "" +msgstr "Gönder" msgid "Suppress logging" msgstr "" @@ -3057,7 +2994,7 @@ msgid "Synchronizing..." msgstr "" msgid "System" -msgstr "" +msgstr "Sistem" msgid "System Log" msgstr "" @@ -3209,11 +3146,6 @@ msgid "" msgstr "" msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3356,15 +3288,6 @@ msgstr "" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "" @@ -3426,10 +3349,10 @@ msgid "Upload archive..." msgstr "" msgid "Uploaded File" -msgstr "" +msgstr "Yüklenen Dosya" msgid "Uptime" -msgstr "" +msgstr "Açılma süresi" msgid "Use <code>/etc/ethers</code>" msgstr "" @@ -3462,16 +3385,16 @@ msgid "Use builtin IPv6-management" msgstr "" msgid "Use custom DNS servers" -msgstr "" +msgstr "Özel DNS sunucularını kullan" msgid "Use default gateway" -msgstr "" +msgstr "Varsayılan ağ geçidini kullan" msgid "Use gateway metric" -msgstr "" +msgstr "Ağ geçidi metriğini kullan" msgid "Use routing table" -msgstr "" +msgstr "Yönlendirme tablosunu kullan" msgid "" "Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</" @@ -3482,7 +3405,7 @@ msgid "" msgstr "" msgid "Used" -msgstr "" +msgstr "Kullanılmış" msgid "Used Key Slot" msgstr "" @@ -3499,7 +3422,7 @@ msgid "User key (PEM encoded)" msgstr "" msgid "Username" -msgstr "" +msgstr "Kullanıcı adı" msgid "VC-Mux" msgstr "" @@ -3532,22 +3455,16 @@ msgid "VPNC (CISCO 3000 (and others) VPN)" msgstr "" msgid "Vendor" -msgstr "" +msgstr "Satıcı" msgid "Vendor Class to send when requesting DHCP" msgstr "" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" -msgstr "" +msgstr "Kontrol" msgid "Version" -msgstr "" +msgstr "Versiyon" msgid "WDS" msgstr "" @@ -3572,10 +3489,6 @@ msgid "" "and ad-hoc mode) to be installed." msgstr "" -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "" @@ -3589,7 +3502,7 @@ msgid "Waiting for device..." msgstr "" msgid "Warning" -msgstr "" +msgstr "Uyarı" msgid "Warning: There are unsaved changes that will get lost on reboot!" msgstr "" @@ -3599,20 +3512,14 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" -msgstr "" +msgstr "Genişlik" msgid "WireGuard VPN" msgstr "" msgid "Wireless" -msgstr "" +msgstr "Kablosuz" msgid "Wireless Adapter" msgstr "" @@ -3675,28 +3582,28 @@ msgid "auto" msgstr "otomatik" msgid "baseT" -msgstr "" +msgstr "baseT" msgid "bridged" msgstr "köprülü" msgid "create:" -msgstr "" +msgstr "oluşturma:" msgid "creates a bridge over specified interface(s)" msgstr "" msgid "dB" -msgstr "" +msgstr "dB" msgid "dBm" -msgstr "" +msgstr "dBm" msgid "disable" msgstr "etkin değil" msgid "disabled" -msgstr "" +msgstr "devre dışı" msgid "expired" msgstr "sona ermiş" @@ -3710,19 +3617,19 @@ msgid "forward" msgstr "ileri" msgid "full-duplex" -msgstr "" +msgstr "tam çift yönlü" msgid "half-duplex" -msgstr "" +msgstr "yarı çift yönlü" msgid "help" msgstr "yardım" msgid "hidden" -msgstr "" +msgstr "gizli" msgid "hybrid mode" -msgstr "" +msgstr "hibrit mod" msgid "if target is a network" msgstr "eğer hedef ağsa" @@ -3731,34 +3638,31 @@ msgid "input" msgstr "giriş" msgid "kB" -msgstr "" +msgstr "kB" msgid "kB/s" -msgstr "" +msgstr "kB/s" msgid "kbit/s" -msgstr "" +msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "yerel <abbr title=\"Domain Name System\">DNS</abbr> dosyası" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" -msgstr "" +msgstr "dakika" msgid "no" msgstr "hayır" msgid "no link" -msgstr "" +msgstr "bağlantı yok" msgid "none" msgstr "hiçbiri" msgid "not present" -msgstr "" +msgstr "mevcut değil" msgid "off" msgstr "kapalı" @@ -3767,31 +3671,31 @@ msgid "on" msgstr "açık" msgid "open" -msgstr "" +msgstr "açık" msgid "overlay" -msgstr "" +msgstr "bindirilmiş" msgid "random" -msgstr "" +msgstr "rastgele" msgid "relay mode" -msgstr "" +msgstr "anahtarlama modu" msgid "routed" msgstr "yönlendirildi" msgid "server mode" -msgstr "" +msgstr "sunucu modu" msgid "stateful-only" msgstr "" msgid "stateless" -msgstr "" +msgstr "durumsuz" msgid "stateless + stateful" -msgstr "" +msgstr "durumsuz + durumlu" msgid "tagged" msgstr "etiketlendi" @@ -3800,7 +3704,7 @@ msgid "time units (TUs / 1.024 ms) [1000-65535]" msgstr "" msgid "unknown" -msgstr "" +msgstr "bilinmeyen" msgid "unlimited" msgstr "sınırsız" diff --git a/modules/luci-base/po/uk/base.po b/modules/luci-base/po/uk/base.po index e86bd81a8e..d053200496 100644 --- a/modules/luci-base/po/uk/base.po +++ b/modules/luci-base/po/uk/base.po @@ -183,9 +183,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -227,9 +224,6 @@ msgstr "Номер ATM-пристрою" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "Концентратор доступу" @@ -337,11 +331,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -530,9 +519,6 @@ msgstr "Вказана неправильна адреса!" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -719,9 +705,6 @@ msgstr "Підключений" msgid "Connection Limit" msgstr "Гранична кількість підключень" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "Підключення" @@ -859,9 +842,6 @@ msgstr "Типовий шлюз" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "Типовий стан" @@ -1403,9 +1383,6 @@ msgstr "Призупинити" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1524,9 +1501,6 @@ msgstr "Статус IPv6 WAN" msgid "IPv6 address" msgstr "Адреса IPv6" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2119,9 +2093,6 @@ msgstr "" msgid "NTP server candidates" msgstr "Кандидати для синхронізації NTP-сервера" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Ім'я" @@ -2299,12 +2270,6 @@ msgstr "Опція видалена" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2786,9 +2751,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2871,9 +2833,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2899,14 +2858,6 @@ msgstr "Виконати перевірку файлової системи" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2962,17 +2913,6 @@ msgstr "Розділяти клієнтів" msgid "Server Settings" msgstr "Настройки сервера" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "Назва (ім'я) сервісу" @@ -3069,9 +3009,6 @@ msgstr "Сортування" msgid "Source" msgstr "Джерело" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "Визначає каталог, до якого приєднаний пристрій" @@ -3386,11 +3323,6 @@ msgstr "" "адресу вашого комп'ютера, щоб знову отримати доступ до пристрою." msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3556,15 +3488,6 @@ msgstr "Інтерфейс тунелю" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "Потужність передавача" @@ -3744,12 +3667,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "Клас постачальника для відправки при запиті DHCP" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "Перевірте" @@ -3781,10 +3698,6 @@ msgstr "" "WPA-шифрування потребує інсталяції <em>wpa_supplicant</em> (для режиму " "клієнта) або <em>hostapd</em> (для Точки доступу та режиму ad-hoc)." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "Очікуємо, доки зміни наберуть чинності..." @@ -3808,12 +3721,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3959,9 +3866,6 @@ msgstr "" "Локальний <abbr title=\"Domain Name System — система доменних імен\">DNS</" "abbr>-файл" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/vi/base.po b/modules/luci-base/po/vi/base.po index 8dacc12e65..b5e712ca36 100644 --- a/modules/luci-base/po/vi/base.po +++ b/modules/luci-base/po/vi/base.po @@ -166,9 +166,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -202,9 +199,6 @@ msgstr "" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "" @@ -307,11 +301,6 @@ msgstr "" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -500,9 +489,6 @@ msgstr "" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -675,9 +661,6 @@ msgstr "" msgid "Connection Limit" msgstr "Giới hạn kết nối" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "" @@ -815,9 +798,6 @@ msgstr "" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "" @@ -1345,9 +1325,6 @@ msgstr "Hang Up" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1462,9 +1439,6 @@ msgstr "" msgid "IPv6 address" msgstr "" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2040,9 +2014,6 @@ msgstr "" msgid "NTP server candidates" msgstr "" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "Tên" @@ -2220,12 +2191,6 @@ msgstr "" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2686,9 +2651,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2771,9 +2733,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2799,14 +2758,6 @@ msgstr "" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2860,17 +2811,6 @@ msgstr "Cô lập đối tượng" msgid "Server Settings" msgstr "" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "" @@ -2963,9 +2903,6 @@ msgstr "" msgid "Source" msgstr "Nguồn" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "" @@ -3244,11 +3181,6 @@ msgstr "" "máy tính để tiếp cận thiết bị một lần nữa, phụ thuộc vào cài đặt của bạn. " msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3398,15 +3330,6 @@ msgstr "" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "" @@ -3579,12 +3502,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "" @@ -3614,10 +3531,6 @@ msgid "" "and ad-hoc mode) to be installed." msgstr "" -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "" @@ -3641,12 +3554,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3788,9 +3695,6 @@ msgstr "" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "Tập tin <abbr title=\"Domain Name System\">DNS</abbr> địa phương" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/modules/luci-base/po/zh-cn/base.po b/modules/luci-base/po/zh-cn/base.po index 8399e947b8..e0ef2eec71 100644 --- a/modules/luci-base/po/zh-cn/base.po +++ b/modules/luci-base/po/zh-cn/base.po @@ -162,9 +162,6 @@ msgstr "A43C + J43 + A43 + V43" msgid "ADSL" msgstr "ADSL" -msgid "AICCU (SIXXS)" -msgstr "AICCU (SIXXS)" - msgid "ANSI T1.413" msgstr "ANSI T1.413" @@ -200,9 +197,6 @@ msgstr "ATM 设备号码" msgid "ATU-C System Vendor ID" msgstr "ATU-C 系统供应商 ID" -msgid "AYIYA" -msgstr "AYIYA" - msgid "Access Concentrator" msgstr "接入集中器" @@ -305,13 +299,6 @@ msgstr "允许 127.0.0.0/8 回环范围内的上行响应，例如：RBL 服务" msgid "Allowed IPs" msgstr "允许的 IP" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" -"也请查看 SIXXS 上的<a href=\"https://www.sixxs.net/faq/connectivity/?" -"faq=comparison\">隧道对比</a>" - msgid "Always announce default router" msgstr "总是通告默认路由" @@ -500,9 +487,6 @@ msgstr "指定了错误的地址！" msgid "Band" msgstr "频宽" -msgid "Behind NAT" -msgstr "在 NAT 网络内" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -684,9 +668,6 @@ msgstr "已连接" msgid "Connection Limit" msgstr "连接数限制" -msgid "Connection to server fails when TLS cannot be used" -msgstr "当 TLS 不可用时，与服务器连接失败" - msgid "Connections" msgstr "连接" @@ -823,9 +804,6 @@ msgstr "默认网关" msgid "Default is stateless + stateful" msgstr "默认是无状态的 + 有状态的" -msgid "Default route" -msgstr "默认路由" - msgid "Default state" msgstr "默认状态" @@ -1357,9 +1335,6 @@ msgstr "挂起" msgid "Header Error Code Errors (HEC)" msgstr "请求头错误代码错误（HEC）" -msgid "Heartbeat" -msgstr "心跳" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1472,9 +1447,6 @@ msgstr "IPv6 WAN 状态" msgid "IPv6 address" msgstr "IPv6 地址" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "绑定到隧道本端的 IPv6 地址（可选）" - msgid "IPv6 assignment hint" msgstr "IPv6 分配提示" @@ -2056,9 +2028,6 @@ msgstr "NT 域" msgid "NTP server candidates" msgstr "候选 NTP 服务器" -msgid "NTP sync time-out" -msgstr "NTP 同步超时" - msgid "Name" msgstr "名称" @@ -2234,12 +2203,6 @@ msgstr "移除的选项" msgid "Optional" msgstr "可选" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "可选，设置这个选项会覆盖默认服务器（tic.sixxs.net）" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "可选，如果您的 SIXXS 账号拥有一个以上的隧道请设置此项" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2713,9 +2676,6 @@ msgstr "请求 IPv6 地址" msgid "Request IPv6-prefix of length" msgstr "请求指定长度的 IPv6 前缀" -msgid "Require TLS" -msgstr "必须使用 TLS" - msgid "Required" msgstr "必须" @@ -2802,9 +2762,6 @@ msgstr "路由允许的 IP" msgid "Route type" msgstr "路由类型" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "下行接口的路由 IPv6 前缀" - msgid "Router Advertisement-Service" msgstr "路由通告服务" @@ -2828,14 +2785,6 @@ msgstr "文件系统检查" msgid "SHA256" msgstr "SHA256" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "SIXXS 仅支持 TIC，对于使用 IP 协议 41（RFC4213）的静态隧道，使用 6in4" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "SIXXS-handle[/Tunnel-ID]" - msgid "SNR" msgstr "SNR" @@ -2889,17 +2838,6 @@ msgstr "隔离客户端" msgid "Server Settings" msgstr "服务器设置" -msgid "Server password" -msgstr "服务器密码" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "服务器密码，如果用户名包含隧道 ID 则在此填写隧道自己的密码" - -msgid "Server username" -msgstr "服务器用户名" - msgid "Service Name" msgstr "服务名" @@ -2996,9 +2934,6 @@ msgstr "排序" msgid "Source" msgstr "源地址" -msgid "Source routing" -msgstr "源路由" - msgid "Specifies the directory the device is attached to" msgstr "指定设备的挂载目录" @@ -3286,11 +3221,6 @@ msgstr "" "钟后即可尝试重新连接到路由。您可能需要更改计算机的 IP 地址以重新连接。" msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "隧道端点在 NAT 之后，默认为禁用，仅适用于 AYIYA" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "不支持所上传的映像文件格式，请选择适合当前平台的通用映像文件。" @@ -3439,15 +3369,6 @@ msgstr "隧道接口" msgid "Tunnel Link" msgstr "隧道链接" -msgid "Tunnel broker protocol" -msgstr "隧道协议" - -msgid "Tunnel setup server" -msgstr "隧道配置服务器" - -msgid "Tunnel type" -msgstr "隧道类型" - msgid "Tx-Power" msgstr "传输功率" @@ -3627,12 +3548,6 @@ msgstr "Vendor" msgid "Vendor Class to send when requesting DHCP" msgstr "请求 DHCP 时发送的 Vendor Class 选项" -msgid "Verbose" -msgstr "详细" - -msgid "Verbose logging by aiccu daemon" -msgstr "Aiccu 守护程序详细日志" - msgid "Verify" msgstr "验证" @@ -3664,10 +3579,6 @@ msgstr "" "WPA 加密需要安装 wpa_supplicant（客户端模式）或安装 hostapd（接入点 AP、点对" "点 Ad-Hoc 模式）。" -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "NTP 同步前的等待时间，设置为 0 表示不等待（可选）" - msgid "Waiting for changes to be applied..." msgstr "正在应用更改..." @@ -3691,12 +3602,6 @@ msgid "" "communications" msgstr "当使用 PSK 时，PMK 可以在没有 AP 间通信的情况下在本地生成" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "是否添加一条通向隧道的 IPv6 默认路由" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "是否仅路由来自分发前缀的数据包" - msgid "Width" msgstr "频宽" @@ -3838,9 +3743,6 @@ msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "本地 <abbr title=\"Domain Name Syste\">DNS</abbr> 解析文件" -msgid "minimum 1280, maximum 1480" -msgstr "最小值 1280，最大值 1480" - msgid "minutes" msgstr "分钟" @@ -3915,138 +3817,3 @@ msgstr "是" msgid "« Back" msgstr "« 后退" - -#~ msgid "Apply" -#~ msgstr "应用" - -#~ msgid "Applying changes" -#~ msgstr "正在应用更改" - -#~ msgid "Configuration applied." -#~ msgstr "配置已应用。" - -#~ msgid "Save & Apply" -#~ msgstr "保存&应用" - -#~ msgid "The following changes have been committed" -#~ msgstr "以下更改已提交" - -#~ msgid "There are no pending changes to apply!" -#~ msgstr "没有待生效的更改！" - -#~ msgid "Action" -#~ msgstr "动作" - -#~ msgid "Buttons" -#~ msgstr "按键" - -#~ msgid "Handler" -#~ msgstr "处理程序" - -#~ msgid "Maximum hold time" -#~ msgstr "最大持续时间" - -#~ msgid "Minimum hold time" -#~ msgstr "最低持续时间" - -#~ msgid "Path to executable which handles the button event" -#~ msgstr "处理按键动作的可执行文件路径" - -#~ msgid "Specifies the button state to handle" -#~ msgstr "指定要处理的按键状态" - -#~ msgid "This page allows the configuration of custom button actions" -#~ msgstr "自定义按键动作。" - -#~ msgid "Leasetime" -#~ msgstr "租用时间" - -#~ msgid "Optional." -#~ msgstr "可选。" - -#~ msgid "navigation Navigation" -#~ msgstr "导航" - -#~ msgid "skiplink1 Skip to navigation" -#~ msgstr "skiplink1 跳转到导航" - -#~ msgid "skiplink2 Skip to content" -#~ msgstr "skiplink2 跳到内容" - -#~ msgid "AuthGroup" -#~ msgstr "认证组" - -#~ msgid "automatic" -#~ msgstr "自动" - -#~ msgid "AR Support" -#~ msgstr "AR 支持" - -#~ msgid "Atheros 802.11%s Wireless Controller" -#~ msgstr "Qualcomm/Atheros 802.11%s 无线控制器" - -#~ msgid "Background Scan" -#~ msgstr "后台搜索" - -#~ msgid "Compression" -#~ msgstr "压缩" - -#~ msgid "Disable HW-Beacon timer" -#~ msgstr "停用 HW-Beacon 计时器" - -#~ msgid "Do not send probe responses" -#~ msgstr "不回送探测响应" - -#~ msgid "Fast Frames" -#~ msgstr "快速帧" - -#~ msgid "Maximum Rate" -#~ msgstr "最高速率" - -#~ msgid "Minimum Rate" -#~ msgstr "最低速率" - -#~ msgid "Multicast Rate" -#~ msgstr "多播速率" - -#~ msgid "Outdoor Channels" -#~ msgstr "户外频道" - -#~ msgid "Regulatory Domain" -#~ msgstr "无线网络国家区域" - -#~ msgid "Separate WDS" -#~ msgstr "隔离 WDS" - -#~ msgid "Static WDS" -#~ msgstr "静态 WDS" - -#~ msgid "Turbo Mode" -#~ msgstr "Turbo 模式" - -#~ msgid "XR Support" -#~ msgstr "XR 支持" - -#~ msgid "Required. Public key of peer." -#~ msgstr "必须，Peer 的公钥。" - -#~ msgid "An additional network will be created if you leave this checked." -#~ msgstr "如果选中此复选框，则会创建一个附加网络。" - -#~ msgid "An additional network will be created if you leave this unchecked." -#~ msgstr "取消选中将会另外创建一个新网络，而不会覆盖当前网络设置" - -#~ msgid "Join Network: Settings" -#~ msgstr "加入网络：设置" - -#~ msgid "CPU" -#~ msgstr "CPU" - -#~ msgid "Port %d" -#~ msgstr "端口 %d" - -#~ msgid "Port %d is untagged in multiple VLANs!" -#~ msgstr "端口 %d 在多个 VLAN 中均未标记！" - -#~ msgid "VLAN Interface" -#~ msgstr "VLAN 接口" diff --git a/modules/luci-base/po/zh-tw/base.po b/modules/luci-base/po/zh-tw/base.po index c62fd0d9b9..82415865a5 100644 --- a/modules/luci-base/po/zh-tw/base.po +++ b/modules/luci-base/po/zh-tw/base.po @@ -167,9 +167,6 @@ msgstr "" msgid "ADSL" msgstr "" -msgid "AICCU (SIXXS)" -msgstr "" - msgid "ANSI T1.413" msgstr "" @@ -205,9 +202,6 @@ msgstr "ATM裝置號碼" msgid "ATU-C System Vendor ID" msgstr "" -msgid "AYIYA" -msgstr "" - msgid "Access Concentrator" msgstr "接入集線器" @@ -310,11 +304,6 @@ msgstr "允許127.0.0.0/8範圍內的上游回應，例如：RBL服務" msgid "Allowed IPs" msgstr "" -msgid "" -"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison" -"\">Tunneling Comparison</a> on SIXXS" -msgstr "" - msgid "Always announce default router" msgstr "" @@ -503,9 +492,6 @@ msgstr "指定了錯誤的位置！" msgid "Band" msgstr "" -msgid "Behind NAT" -msgstr "" - msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " @@ -686,9 +672,6 @@ msgstr "已連線" msgid "Connection Limit" msgstr "連線限制" -msgid "Connection to server fails when TLS cannot be used" -msgstr "" - msgid "Connections" msgstr "連線數" @@ -826,9 +809,6 @@ msgstr "預設匝道器" msgid "Default is stateless + stateful" msgstr "" -msgid "Default route" -msgstr "" - msgid "Default state" msgstr "預設狀態" @@ -1358,9 +1338,6 @@ msgstr "斷線" msgid "Header Error Code Errors (HEC)" msgstr "" -msgid "Heartbeat" -msgstr "" - msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." @@ -1473,9 +1450,6 @@ msgstr "IPv6寬頻連線狀態" msgid "IPv6 address" msgstr "IPv6位址" -msgid "IPv6 address delegated to the local tunnel endpoint (optional)" -msgstr "" - msgid "IPv6 assignment hint" msgstr "" @@ -2047,9 +2021,6 @@ msgstr "" msgid "NTP server candidates" msgstr "NTP伺服器備選" -msgid "NTP sync time-out" -msgstr "" - msgid "Name" msgstr "名稱" @@ -2225,12 +2196,6 @@ msgstr "選項已移除" msgid "Optional" msgstr "" -msgid "Optional, specify to override default server (tic.sixxs.net)" -msgstr "" - -msgid "Optional, use when the SIXXS account has more than one tunnel" -msgstr "" - msgid "" "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " "starting with <code>0x</code>." @@ -2700,9 +2665,6 @@ msgstr "" msgid "Request IPv6-prefix of length" msgstr "" -msgid "Require TLS" -msgstr "" - msgid "Required" msgstr "" @@ -2785,9 +2747,6 @@ msgstr "" msgid "Route type" msgstr "" -msgid "Routed IPv6 prefix for downstream interfaces" -msgstr "" - msgid "Router Advertisement-Service" msgstr "" @@ -2811,14 +2770,6 @@ msgstr "執行系統檢查" msgid "SHA256" msgstr "" -msgid "" -"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " -"use 6in4 instead" -msgstr "" - -msgid "SIXXS-handle[/Tunnel-ID]" -msgstr "" - msgid "SNR" msgstr "" @@ -2872,17 +2823,6 @@ msgstr "分隔用戶端" msgid "Server Settings" msgstr "伺服器設定值" -msgid "Server password" -msgstr "" - -msgid "" -"Server password, enter the specific password of the tunnel when the username " -"contains the tunnel ID" -msgstr "" - -msgid "Server username" -msgstr "" - msgid "Service Name" msgstr "服務名稱" @@ -2978,9 +2918,6 @@ msgstr "分類" msgid "Source" msgstr "來源" -msgid "Source routing" -msgstr "" - msgid "Specifies the directory the device is attached to" msgstr "指定這個設備被附掛到那個目錄" @@ -3276,11 +3213,6 @@ msgstr "" "要更新您電腦的位址以便再連設備, 端看您的設定. " msgid "" -"The tunnel end-point is behind NAT, defaults to disabled and only applies to " -"AYIYA" -msgstr "" - -msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" @@ -3430,15 +3362,6 @@ msgstr "通道介面" msgid "Tunnel Link" msgstr "" -msgid "Tunnel broker protocol" -msgstr "" - -msgid "Tunnel setup server" -msgstr "" - -msgid "Tunnel type" -msgstr "" - msgid "Tx-Power" msgstr "傳送-功率" @@ -3616,12 +3539,6 @@ msgstr "" msgid "Vendor Class to send when requesting DHCP" msgstr "當請求DHCP封包時要傳送的製造商類別碼" -msgid "Verbose" -msgstr "" - -msgid "Verbose logging by aiccu daemon" -msgstr "" - msgid "Verify" msgstr "確認" @@ -3653,10 +3570,6 @@ msgstr "" "WPA-加密需要 wpa_supplican(終端模式)或者hostapd熱點(對AP或者是 ad-hoc模式)已" "被安裝." -msgid "" -"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)" -msgstr "" - msgid "Waiting for changes to be applied..." msgstr "等待修改被啟用..." @@ -3680,12 +3593,6 @@ msgid "" "communications" msgstr "" -msgid "Whether to create an IPv6 default route over the tunnel" -msgstr "" - -msgid "Whether to route only packets from delegated prefixes" -msgstr "" - msgid "Width" msgstr "" @@ -3825,9 +3732,6 @@ msgstr "kbit/s" msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file" msgstr "本地<abbr title=\"Domain Name System\">DNS</abbr> 檔案" -msgid "minimum 1280, maximum 1480" -msgstr "" - msgid "minutes" msgstr "" diff --git a/protocols/luci-proto-ipv6/Makefile b/protocols/luci-proto-ipv6/Makefile index 761ee2f9f5..b28c8d5895 100644 --- a/protocols/luci-proto-ipv6/Makefile +++ b/protocols/luci-proto-ipv6/Makefile @@ -6,7 +6,7 @@ include $(TOPDIR)/rules.mk -LUCI_TITLE:=Support for DHCPv6/6in4/6to4/6rd/DS-Lite/aiccu +LUCI_TITLE:=Support for DHCPv6/6in4/6to4/6rd/DS-Lite LUCI_DEPENDS:= PKG_LICENSE:=Apache-2.0 diff --git a/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_aiccu.lua b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_aiccu.lua deleted file mode 100644 index 7b5e6043cc..0000000000 --- a/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_aiccu.lua +++ /dev/null @@ -1,136 +0,0 @@ --- Copyright 2015 Paul Oranje <por@xs4all.nl> --- Licensed to the public under the Apache License 2.0. - -local map, section, net = ... - --- config read by /lib/netifd/proto/aiccu.sh -local username, password, protocol, server, tunnelid, ip6prefix, requiretls, nat, heartbeat, - verbose, ntpsynctimeout, ip6addr, sourcerouting, defaultroute - --- generic parameters -local metric, ttl, mtu - - -username = section:taboption("general", Value, "username", - translate("Server username"), - translate("SIXXS-handle[/Tunnel-ID]")) -username.datatype = "string" - -password = section:taboption("general", Value, "password", - translate("Server password"), - translate("Server password, enter the specific password of the tunnel when the username contains the tunnel ID")) -password.datatype = "string" -password.password = true - - ---[[ SIXXS supports only TIC as tunnel broker protocol, no use setting it. -protocol = section:taboption("general", ListValue, "protocol", - translate("Tunnel broker protocol"), - translate("SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) use 6in4 instead")) - -protocol:value("tic", "TIC") -protocol:value("tsp", "TSP") -protocol:value("l2tp", "L2TP") -protocol.default = "tic" -protocol.optional = true ---]] - - -server = section:taboption("general", Value, "server", - translate("Tunnel setup server"), - translate("Optional, specify to override default server (tic.sixxs.net)")) -server.datatype = "host(0)" -server.optional = true - - -tunnelid = section:taboption("general", Value, "tunnelid", - translate("Tunnel ID"), - translate("Optional, use when the SIXXS account has more than one tunnel")) -tunnelid.datatype = "string" -tunnelid.optional = true - - -local ip6prefix = section:taboption("general", Value, "ip6prefix", - translate("IPv6 prefix"), - translate("Routed IPv6 prefix for downstream interfaces")) -ip6prefix.datatype = "ip6addr" -ip6prefix.optional = true - - -heartbeat = s:taboption("general", ListValue, "heartbeat", - translate("Tunnel type"), - translate("Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison\">Tunneling Comparison</a> on SIXXS")) -heartbeat:value("0", translate("AYIYA")) -heartbeat:value("1", translate("Heartbeat")) -heartbeat.default = "0" - - -nat = section:taboption("general", Flag, "nat", - translate("Behind NAT"), - translate("The tunnel end-point is behind NAT, defaults to disabled and only applies to AYIYA")) -nat.optional = true -nat.default = nat.disabled - - -requiretls = section:taboption("general", Flag, "requiretls", - translate("Require TLS"), - translate("Connection to server fails when TLS cannot be used")) -requiretls.optional = true -requiretls.default = requiretls.disabled - - -verbose = section:taboption("advanced", Flag, "verbose", - translate("Verbose"), - translate("Verbose logging by aiccu daemon")) -verbose.optional = true -verbose.default = verbose.disabled - - -ntpsynctimeout = section:taboption("advanced", Value, "ntpsynctimeout", - translate("NTP sync time-out"), - translate("Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)")) -ntpsynctimeout.datatype = "uinteger" -ntpsynctimeout.placeholder = "90" -ntpsynctimeout.optional = true - - -ip6addr = section:taboption("advanced", Value, "ip6addr", - translate("Local IPv6 address"), - translate("IPv6 address delegated to the local tunnel endpoint (optional)")) -ip6addr.datatype = "ip6addr" -ip6addr.optional = true - - -defaultroute = section:taboption("advanced", Flag, "defaultroute", - translate("Default route"), - translate("Whether to create an IPv6 default route over the tunnel")) -defaultroute.default = defaultroute.enabled -defaultroute.optional = true - - -sourcerouting = section:taboption("advanced", Flag, "sourcerouting", - translate("Source routing"), - translate("Whether to route only packets from delegated prefixes")) -sourcerouting.default = sourcerouting.enabled -sourcerouting.optional = true - - -metric = section:taboption("advanced", Value, "metric", - translate("Use gateway metric")) -metric.datatype = "uinteger" -metric.placeholder = "0" -metric:depends("defaultroute", defaultroute.enabled) - - -ttl = section:taboption("advanced", Value, "ttl", - translate("Use TTL on tunnel interface")) -ttl.datatype = "range(1,255)" -ttl.placeholder = "64" - - -mtu = section:taboption("advanced", Value, "mtu", - translate("Use MTU on tunnel interface"), - translate("minimum 1280, maximum 1480")) -mtu.datatype = "range(1280,1480)" -mtu.placeholder = "1280" - diff --git a/protocols/luci-proto-ipv6/luasrc/model/network/proto_aiccu.lua b/protocols/luci-proto-ipv6/luasrc/model/network/proto_aiccu.lua deleted file mode 100644 index e0d7fd3e21..0000000000 --- a/protocols/luci-proto-ipv6/luasrc/model/network/proto_aiccu.lua +++ /dev/null @@ -1,49 +0,0 @@ --- Copyright 2015 Paul Oranje <por@xs4all.nl> --- Licensed to the public under GPLv2 - -local netmod = luci.model.network -local interface = luci.model.network.interface - -local proto = netmod:register_protocol("aiccu") - -function proto.get_i18n(self) - return luci.i18n.translate("AICCU (SIXXS)") -end - -function proto.ifname(self) - return "aiccu-" .. self.sid -end - -function proto.get_interface(self) - return interface(self:ifname(), self) -end - -function proto.is_installed(self) - return nixio.fs.access("/lib/netifd/proto/aiccu.sh") -end - -function proto.opkg_package(self) - return "aiccu" -end - -function proto.is_floating(self) - return true -end - -function proto.is_virtual(self) - return true -end - -function proto.get_interfaces(self) - return nil -end - -function proto.contains_interface(self, ifname) - if self:is_floating() then - return (netmod:ifnameof(ifc) == self:ifname()) - else - return netmod.protocol.contains_interface(self, ifc) - end -end - -netmod:register_pattern_virtual("^aiccu%-%w") |