diff options
7 files changed, 21 insertions, 58 deletions
diff --git a/applications/luci-app-firewall/luasrc/model/cbi/firewall/zone-details.lua b/applications/luci-app-firewall/luasrc/model/cbi/firewall/zone-details.lua index 46b3744403..6c90476f81 100644 --- a/applications/luci-app-firewall/luasrc/model/cbi/firewall/zone-details.lua +++ b/applications/luci-app-firewall/luasrc/model/cbi/firewall/zone-details.lua @@ -60,7 +60,7 @@ s:tab("advanced", translate("Advanced Settings")) name = s:taboption("general", Value, "name", translate("Name")) name.optional = false name.forcewrite = true -name.datatype = "uciname" +name.datatype = "and(uciname,maxlength(14))" function name.write(self, section, value) if zone:name() ~= value then @@ -76,15 +76,6 @@ function name.write(self, section, value) } end -function name.validate(self, value) - -- fw3 defines 14 as the maximum length of zone name - if #value > 14 then - return nil, translate("Zone name is too long") - else - return value - end -end - p = { s:taboption("general", ListValue, "input", translate("Input")), s:taboption("general", ListValue, "output", translate("Output")), diff --git a/applications/luci-app-firewall/po/pl/firewall.po b/applications/luci-app-firewall/po/pl/firewall.po index 18be74d231..2ccd25ccc1 100644 --- a/applications/luci-app-firewall/po/pl/firewall.po +++ b/applications/luci-app-firewall/po/pl/firewall.po @@ -301,7 +301,7 @@ msgid "Restrict Masquerading to given destination subnets" msgstr "Ogranicz maskaradę do wskazanych sieci docelowych" msgid "Restrict Masquerading to given source subnets" -msgstr "Ogranicz maskaradę do wskazanych sieci żródłowych" +msgstr "Ogranicz maskaradę do wskazanych sieci źródłowych" # Wstawiłem rodzinę gdyż gdzieś wcześniej było tak opisane ale klasa pasuje mi tu bardziej. # Obsy - niestety ale "rodzina". W gui dotyczy to wyboru IPv4/IPv6, więc "rodzina" a nie klasa. @@ -317,7 +317,7 @@ msgid "" "Rewrite matched traffic to the given source port. May be left empty to only " "rewrite the IP address." msgstr "" -"Przepisz dopasowany ruch do danego portu żródłowego. Można zostawić puste " +"Przepisz dopasowany ruch do danego portu źródłowego. Można zostawić puste " "aby przepisać tylko adres IP" msgid "Rewrite to source %s" @@ -339,7 +339,7 @@ msgid "Source MAC address" msgstr "Źródłowy adres MAC" msgid "Source NAT" -msgstr "NAT żródłowy" +msgstr "NAT źródłowy" # http://www.digipedia.pl/def/doc/id/677604507/name/SNAT/ msgid "" @@ -348,7 +348,7 @@ msgid "" "multiple WAN addresses to internal subnets." msgstr "" "SNAT używany jest wtedy, gdy zmieniane są adresy pakietów połączenia " -"wychodzącego, czyli pakiety żródłowe. Wykonywany jest zawsze po routowaniu " +"wychodzącego, czyli pakiety źródłowe. Wykonywany jest zawsze po routowaniu " "(POSTROUTING), a więc w chwili, gdy pakiety są gotowe opuścić host. " "IPmasquerading jest formą SNAT." diff --git a/documentation/SubmitPatchesHowTo:.md b/documentation/SubmitPatchesHowTo:.md deleted file mode 100644 index cdd15524a5..0000000000 --- a/documentation/SubmitPatchesHowTo:.md +++ /dev/null @@ -1,33 +0,0 @@ -# Checkout svn - - svn co http://svn.luci.subsignal.org/luci/trunk - -and change to that directory: - - cd trunk - -# Make your changes - -Edit the files you want to change. If you add some new files you need to add them to the svn tree: - - svn add <dir/files> - -Where <dir/files> are the directories/files you have added. Its possible to specify multiple files/directories here. - -# Use svn diff to generate a patch with your changes - -To check if your changes look ok first do: - - svn diff <dir/files> - -and check the output. Again you can specify multiple dirs/directories here. - -If everything looks like expected save the patch: - - svn diff <dir/files> > ./mypatch.patch - - -# Submit patches - -Use the [Ticket system](http://luci.subsignal.org/trac/newticket) to submit your patch. - diff --git a/modules/luci-base/po/pl/base.po b/modules/luci-base/po/pl/base.po index baa7ab8534..e1ec57ffee 100644 --- a/modules/luci-base/po/pl/base.po +++ b/modules/luci-base/po/pl/base.po @@ -42,13 +42,13 @@ msgid "-- match by label --" msgstr "" msgid "1 Minute Load:" -msgstr "Obciążenie w ciągu 1 minuty:" +msgstr "Obciążenie 1 min.:" msgid "15 Minute Load:" -msgstr "Obciążenie w ciągu 15 minut:" +msgstr "Obciążenie 15 min.:" msgid "5 Minute Load:" -msgstr "Obciążenie w ciągu 5 minut:" +msgstr "Obciążenie 5 min.:" msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>" msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>" @@ -1838,7 +1838,7 @@ msgid "Out" msgstr "Wychodzące" msgid "Outbound:" -msgstr "Wychodzące:" +msgstr "Wychodzący:" msgid "Outdoor Channels" msgstr "Kanały zewnętrzne" diff --git a/modules/luci-mod-admin-full/luasrc/model/cbi/admin_system/ipkg.lua b/modules/luci-mod-admin-full/luasrc/model/cbi/admin_system/ipkg.lua index b01b5dbb3e..7c6d7e1c66 100644 --- a/modules/luci-mod-admin-full/luasrc/model/cbi/admin_system/ipkg.lua +++ b/modules/luci-mod-admin-full/luasrc/model/cbi/admin_system/ipkg.lua @@ -11,6 +11,7 @@ f = SimpleForm("ipkgconf", translate("OPKG-Configuration"), translate("General o f:append(Template("admin_system/ipkg")) t = f:field(TextValue, "lines") +t.wrap = "off" t.rows = 10 function t.cfgvalue() return nixio.fs.readfile(ipkgfile) or "" @@ -28,6 +29,7 @@ g = SimpleForm("distfeedconf", translate("Distribution feeds"), translate("Build/distribution specific feed definitions. This file will NOT be preserved in any sysupgrade.")) d = g:field(TextValue, "lines2") +d.wrap = "off" d.rows = 10 function d.cfgvalue() return nixio.fs.readfile(distfeeds) or "" @@ -45,6 +47,7 @@ h = SimpleForm("customfeedconf", translate("Custom feeds"), translate("Custom feed definitions, e.g. private feeds. This file can be preserved in a sysupgrade.")) c = h:field(TextValue, "lines3") +c.wrap = "off" c.rows = 10 function c.cfgvalue() return nixio.fs.readfile(customfeeds) or "" diff --git a/modules/luci-mod-failsafe/luasrc/controller/failsafe/failsafe.lua b/modules/luci-mod-failsafe/luasrc/controller/failsafe/failsafe.lua index 6f78643018..60caadb4b1 100644 --- a/modules/luci-mod-failsafe/luasrc/controller/failsafe/failsafe.lua +++ b/modules/luci-mod-failsafe/luasrc/controller/failsafe/failsafe.lua @@ -84,11 +84,13 @@ function action_flashops() fp = io.open(image_tmp, "w") end end - if chunk then - fp:write(chunk) - end - if eof then - fp:close() + if fp then + if chunk then + fp:write(chunk) + end + if eof then + fp:close() + end end end ) diff --git a/modules/luci-mod-rpc/luasrc/controller/rpc.lua b/modules/luci-mod-rpc/luasrc/controller/rpc.lua index 129ca43b51..759bb749cf 100644 --- a/modules/luci-mod-rpc/luasrc/controller/rpc.lua +++ b/modules/luci-mod-rpc/luasrc/controller/rpc.lua @@ -49,10 +49,10 @@ function rpc_auth() server.challenge = function(user, pass) local sid, token, secret - require "luci.config" + local config = require "luci.config" if sys.user.checkpasswd(user, pass) then - local sdat = util.ubus("session", "create", { timeout = luci.config.sauth.sessiontime }) + local sdat = util.ubus("session", "create", { timeout = config.sauth.sessiontime }) if sdat then sid = sdat.ubus_rpc_session token = sys.uniqueid(16) |