luci-proto-pppossh: move pppossh to own package

This is a special proto which should go into a separate package.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

2 files changed, 1 insertions, 129 deletions

diff --git a/protocols/luci-proto-ppp/luasrc/model/cbi/admin_network/proto_pppossh.lua b/protocols/luci-proto-ppp/luasrc/model/cbi/admin_network/proto_pppossh.lua
deleted file mode 100644
index e53262b5dc..0000000000
--- a/protocols/luci-proto-ppp/luasrc/model/cbi/admin_network/proto_pppossh.lua
+++ /dev/null
@@ -1,122 +0,0 @@
--- Copyright (C) 2015 Yousong Zhou <yszhou4tech@gmail.com>
--- Licensed to the public under the Apache License 2.0.
-
-local map, section, net = ...
-
-local sshuser, server, port, ssh_options, identity, ipaddr, peeraddr
-
-sshuser = section:taboption("general", Value, "sshuser", translate("SSH username"))
-
-server = section:taboption("general", Value, "server", translate("SSH server address"))
-server.datatype = "host(0)"
-
-port = section:taboption("general", Value, "port", translate("SSH server port"))
-port.datatype = "port"
-port.optional = true
-port.default = 22
-
-ssh_options = section:taboption("general", Value, "ssh_options", translate("Extra SSH command options"))
-ssh_options.optional = true
-
-identity = section:taboption("general", DynamicList, "identity", translate("List of SSH key files for auth"))
-identity.optional = true
-identity.datatype = "file"
-
-ipaddr = section:taboption("general", Value, "ipaddr", translate("Local IP address to assign"))
-ipaddr.datatype = "ipaddr"
-
-peeraddr = section:taboption("general", Value, "peeraddr", translate("Peer IP address to assign"))
-peeraddr.datatype = "ipaddr"
-
-
-local ipv6, defaultroute, metric, peerdns, dns,
-      keepalive_failure, keepalive_interval, demand
-
-if luci.model.network:has_ipv6() then
-        ipv6 = section:taboption("advanced", Flag, "ipv6",
-                translate("Enable IPv6 negotiation on the PPP link"))
-        ipv6.default = ipv6.disabled
-end
-
-
-defaultroute = section:taboption("advanced", Flag, "defaultroute",
-	translate("Use default gateway"),
-	translate("If unchecked, no default route is configured"))
-
-defaultroute.default = defaultroute.enabled
-
-
-metric = section:taboption("advanced", Value, "metric",
-	translate("Use gateway metric"))
-
-metric.placeholder = "0"
-metric.datatype    = "uinteger"
-metric:depends("defaultroute", defaultroute.enabled)
-
-
-peerdns = section:taboption("advanced", Flag, "peerdns",
-	translate("Use DNS servers advertised by peer"),
-	translate("If unchecked, the advertised DNS server addresses are ignored"))
-
-peerdns.default = peerdns.enabled
-
-
-dns = section:taboption("advanced", DynamicList, "dns",
-	translate("Use custom DNS servers"))
-
-dns:depends("peerdns", "")
-dns.datatype = "ipaddr"
-dns.cast     = "string"
-
-
-keepalive_failure = section:taboption("advanced", Value, "_keepalive_failure",
-	translate("LCP echo failure threshold"),
-	translate("Presume peer to be dead after given amount of LCP echo failures, use 0 to ignore failures"))
-
-function keepalive_failure.cfgvalue(self, section)
-	local v = m:get(section, "keepalive")
-	if v and #v > 0 then
-		return tonumber(v:match("^(%d+)[ ,]+%d+") or v)
-	end
-end
-
-function keepalive_failure.write() end
-function keepalive_failure.remove() end
-
-keepalive_failure.placeholder = "0"
-keepalive_failure.datatype    = "uinteger"
-
-
-keepalive_interval = section:taboption("advanced", Value, "_keepalive_interval",
-	translate("LCP echo interval"),
-	translate("Send LCP echo requests at the given interval in seconds, only effective in conjunction with failure threshold"))
-
-function keepalive_interval.cfgvalue(self, section)
-	local v = m:get(section, "keepalive")
-	if v and #v > 0 then
-		return tonumber(v:match("^%d+[ ,]+(%d+)"))
-	end
-end
-
-function keepalive_interval.write(self, section, value)
-	local f = tonumber(keepalive_failure:formvalue(section)) or 0
-	local i = tonumber(value) or 5
-	if i < 1 then i = 1 end
-	if f > 0 then
-		m:set(section, "keepalive", "%d %d" %{ f, i })
-	else
-		m:set(section, "keepalive", "0")
-	end
-end
-
-keepalive_interval.remove      = keepalive_interval.write
-keepalive_interval.placeholder = "5"
-keepalive_interval.datatype    = "min(1)"
-
-
-demand = section:taboption("advanced", Value, "demand",
-	translate("Inactivity timeout"),
-	translate("Close inactive connection after the given amount of seconds, use 0 to persist connection"))
-
-demand.placeholder = "0"
-demand.datatype    = "uinteger"
diff --git a/protocols/luci-proto-ppp/luasrc/model/network/proto_ppp.lua b/protocols/luci-proto-ppp/luasrc/model/network/proto_ppp.lua
index 3afb7de4f5..f87b30fcc1 100644
--- a/protocols/luci-proto-ppp/luasrc/model/network/proto_ppp.lua
+++ b/protocols/luci-proto-ppp/luasrc/model/network/proto_ppp.lua
@@ -4,7 +4,7 @@
 local netmod = luci.model.network
 
 local _, p
-for _, p in ipairs({"ppp", "pptp", "pppoe", "pppoa", "l2tp", "pppossh"}) do
+for _, p in ipairs({"ppp", "pptp", "pppoe", "pppoa", "l2tp"}) do
 
 	local proto = netmod:register_protocol(p)
 
@@ -19,8 +19,6 @@ for _, p in ipairs({"ppp", "pptp", "pppoe", "pppoa", "l2tp", "pppossh"}) do
 			return luci.i18n.translate("PPPoATM")
 		elseif p == "l2tp" then
 			return luci.i18n.translate("L2TP")
-		elseif p == "pppossh" then
-			return luci.i18n.translate("PPPoSSH")
 		end
 	end
 
@@ -39,8 +37,6 @@ for _, p in ipairs({"ppp", "pptp", "pppoe", "pppoa", "l2tp", "pppossh"}) do
 			return "ppp-mod-pppoa"
 		elseif p == "l2tp" then
 			return "xl2tpd"
-		elseif p == "pppossh" then
-			return "pppossh"
 		end
 	end
 
@@ -53,8 +49,6 @@ for _, p in ipairs({"ppp", "pptp", "pppoe", "pppoa", "l2tp", "pppossh"}) do
 			return (nixio.fs.glob("/usr/lib/pppd/*/pptp.so")() ~= nil)
 		elseif p == "l2tp" then
 			return nixio.fs.access("/lib/netifd/proto/l2tp.sh")
-		elseif p == "pppossh" then
-			return nixio.fs.access("/lib/netifd/proto/pppossh.sh")
 		else
 			return nixio.fs.access("/lib/netifd/proto/ppp.sh")
 		end