Rework LuCI build system

 * Rename subdirectories to their repective OpenWrt package names
 * Make each LuCI module its own standalone package
 * Deploy a shared luci.mk which is used by each module Makefile

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

6 files changed, 410 insertions, 0 deletions

diff --git a/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_6in4.lua b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_6in4.lua
new file mode 100644
index 0000000000..9b668cdda8
--- /dev/null
+++ b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_6in4.lua
@@ -0,0 +1,111 @@
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright 2011 Jo-Philipp Wich <xm@subsignal.org>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+	http://www.apache.org/licenses/LICENSE-2.0
+]]--
+
+local map, section, net = ...
+
+local ipaddr, peeraddr, ip6addr, tunnelid, username, password
+local defaultroute, metric, ttl, mtu
+
+
+ipaddr = s:taboption("general", Value, "ipaddr",
+	translate("Local IPv4 address"),
+	translate("Leave empty to use the current WAN address"))
+
+ipaddr.datatype = "ip4addr"
+
+
+peeraddr = s:taboption("general", Value, "peeraddr",
+	translate("Remote IPv4 address"),
+	translate("This is usually the address of the nearest PoP operated by the tunnel broker"))
+
+peeraddr.rmempty  = false
+peeraddr.datatype = "ip4addr"
+
+
+ip6addr = s:taboption("general", Value, "ip6addr",
+	translate("Local IPv6 address"),
+	translate("This is the local endpoint address assigned by the tunnel broker, it usually ends with <code>:2</code>"))
+
+ip6addr.datatype = "ip6addr"
+
+
+local ip6prefix = s:taboption("general", Value, "ip6prefix",
+	translate("IPv6 routed prefix"),
+	translate("This is the prefix routed to you by the tunnel broker for use by clients"))
+
+ip6prefix.datatype = "ip6addr"
+
+
+local update = section:taboption("general", Flag, "_update",
+	translate("Dynamic tunnel"),
+	translate("Enable HE.net dynamic endpoint update"))
+
+update.enabled  = "1"
+update.disabled = "0"
+
+function update.write() end
+function update.remove() end
+function update.cfgvalue(self, section)
+	return (tonumber(m:get(section, "tunnelid")) ~= nil)
+		and self.enabled or self.disabled
+end
+
+
+tunnelid = section:taboption("general", Value, "tunnelid", translate("Tunnel ID"))
+tunnelid.datatype = "uinteger"
+tunnelid:depends("_update", update.enabled)
+
+
+username = section:taboption("general", Value, "username",
+	translate("HE.net username"),
+	translate("This is the plain username for logging into the account"))
+
+username:depends("_update", update.enabled)
+username.validate = function(self, val, sid)
+	if type(val) == "string" and #val == 32 and val:match("^[a-fA-F0-9]+$") then
+		return nil, translate("The HE.net endpoint update configuration changed, you must now use the plain username instead of the user ID!")
+	end
+	return val
+end
+
+
+password = section:taboption("general", Value, "password",
+	translate("HE.net password"),
+	translate("This is either the \"Update Key\" configured for the tunnel or the account password if no update key has been configured"))
+
+password.password = true
+password:depends("_update", update.enabled)
+
+
+defaultroute = section:taboption("advanced", Flag, "defaultroute",
+	translate("Default gateway"),
+	translate("If unchecked, no default route is configured"))
+
+defaultroute.default = defaultroute.enabled
+
+
+metric = section:taboption("advanced", Value, "metric",
+	translate("Use gateway metric"))
+
+metric.placeholder = "0"
+metric.datatype    = "uinteger"
+metric:depends("defaultroute", defaultroute.enabled)
+
+
+ttl = section:taboption("advanced", Value, "ttl", translate("Use TTL on tunnel interface"))
+ttl.placeholder = "64"
+ttl.datatype    = "range(1,255)"
+
+
+mtu = section:taboption("advanced", Value, "mtu", translate("Use MTU on tunnel interface"))
+mtu.placeholder = "1280"
+mtu.datatype    = "max(9200)"
diff --git a/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_6rd.lua b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_6rd.lua
new file mode 100644
index 0000000000..3835561dd7
--- /dev/null
+++ b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_6rd.lua
@@ -0,0 +1,81 @@
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright 2011-2012 Jo-Philipp Wich <xm@subsignal.org>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+	http://www.apache.org/licenses/LICENSE-2.0
+]]--
+
+local map, section, net = ...
+
+local ipaddr, peeraddr, ip6addr, tunnelid, username, password
+local defaultroute, metric, ttl, mtu
+
+
+ipaddr = s:taboption("general", Value, "ipaddr",
+	translate("Local IPv4 address"),
+	translate("Leave empty to use the current WAN address"))
+
+ipaddr.datatype = "ip4addr"
+
+
+peeraddr = s:taboption("general", Value, "peeraddr",
+	translate("Remote IPv4 address"),
+	translate("This IPv4 address of the relay"))
+
+peeraddr.rmempty  = false
+peeraddr.datatype = "ip4addr"
+
+
+ip6addr = s:taboption("general", Value, "ip6prefix",
+	translate("IPv6 prefix"),
+	translate("The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"))
+
+ip6addr.rmempty  = false
+ip6addr.datatype = "ip6addr"
+
+
+ip6prefixlen = s:taboption("general", Value, "ip6prefixlen",
+	translate("IPv6 prefix length"),
+	translate("The length of the IPv6 prefix in bits"))
+
+ip6prefixlen.placeholder = "16"
+ip6prefixlen.datatype    = "range(0,128)"
+
+
+ip6prefixlen = s:taboption("general", Value, "ip4prefixlen",
+	translate("IPv4 prefix length"),
+	translate("The length of the IPv4 prefix in bits, the remainder is used in the IPv6 addresses."))
+
+ip6prefixlen.placeholder = "0"
+ip6prefixlen.datatype    = "range(0,32)"
+
+
+
+defaultroute = section:taboption("advanced", Flag, "defaultroute",
+	translate("Default gateway"),
+	translate("If unchecked, no default route is configured"))
+
+defaultroute.default = defaultroute.enabled
+
+
+metric = section:taboption("advanced", Value, "metric",
+	translate("Use gateway metric"))
+
+metric.placeholder = "0"
+metric.datatype    = "uinteger"
+metric:depends("defaultroute", defaultroute.enabled)
+
+
+ttl = section:taboption("advanced", Value, "ttl", translate("Use TTL on tunnel interface"))
+ttl.placeholder = "64"
+ttl.datatype    = "range(1,255)"
+
+
+mtu = section:taboption("advanced", Value, "mtu", translate("Use MTU on tunnel interface"))
+mtu.placeholder = "1280"
+mtu.datatype    = "max(9200)"
diff --git a/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_6to4.lua b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_6to4.lua
new file mode 100644
index 0000000000..c0cb95b2ba
--- /dev/null
+++ b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_6to4.lua
@@ -0,0 +1,46 @@
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright 2011 Jo-Philipp Wich <xm@subsignal.org>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+	http://www.apache.org/licenses/LICENSE-2.0
+]]--
+
+local map, section, net = ...
+
+local ipaddr, defaultroute, metric, ttl, mtu
+
+
+ipaddr = section:taboption("general", Value, "ipaddr",
+	translate("Local IPv4 address"),
+	translate("Leave empty to use the current WAN address"))
+
+ipaddr.datatype = "ip4addr"
+
+defaultroute = section:taboption("advanced", Flag, "defaultroute",
+	translate("Use default gateway"),
+	translate("If unchecked, no default route is configured"))
+
+defaultroute.default = defaultroute.enabled
+
+
+metric = section:taboption("advanced", Value, "metric",
+	translate("Use gateway metric"))
+
+metric.placeholder = "0"
+metric.datatype    = "uinteger"
+metric:depends("defaultroute", defaultroute.enabled)
+
+
+ttl = section:taboption("advanced", Value, "ttl", translate("Use TTL on tunnel interface"))
+ttl.placeholder = "64"
+ttl.datatype    = "range(1,255)"
+
+
+mtu = section:taboption("advanced", Value, "mtu", translate("Use MTU on tunnel interface"))
+mtu.placeholder = "1280"
+mtu.datatype    = "max(9200)"
diff --git a/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_dhcpv6.lua b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_dhcpv6.lua
new file mode 100644
index 0000000000..51f17878d7
--- /dev/null
+++ b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_dhcpv6.lua
@@ -0,0 +1,67 @@
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright 2013 Steven Barth <steven@midlink.org>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+	http://www.apache.org/licenses/LICENSE-2.0
+]]--
+
+local map, section, net = ...
+
+
+local o = section:taboption("general", ListValue, "reqaddress",
+	translate("Request IPv6-address"))
+o:value("try")
+o:value("force")
+o:value("none", "disabled")
+o.default = "try"
+
+
+o = section:taboption("general", Value, "reqprefix",
+	translate("Request IPv6-prefix of length"))
+o:value("auto", translate("automatic"))
+o:value("no", translate("disabled"))
+o:value("48")
+o:value("52")
+o:value("56")
+o:value("60")
+o:value("64")
+o.default = "auto"
+
+
+o = section:taboption("advanced", Flag, "defaultroute",
+	translate("Use default gateway"),
+	translate("If unchecked, no default route is configured"))
+o.default = o.enabled
+
+
+o = section:taboption("advanced", Flag, "peerdns",
+	translate("Use DNS servers advertised by peer"),
+	translate("If unchecked, the advertised DNS server addresses are ignored"))
+o.default = o.enabled
+
+
+o = section:taboption("advanced", Value, "ip6prefix",
+	translate("Custom delegated IPv6-prefix"))
+o.dataype = "ip6addr"
+
+
+o = section:taboption("advanced", DynamicList, "dns",
+	translate("Use custom DNS servers"))
+o:depends("peerdns", "")
+o.datatype = "list(ip6addr)"
+o.cast     = "string"
+
+
+o = section:taboption("advanced", Value, "clientid",
+	translate("Client ID to send when requesting DHCP"))
+
+luci.tools.proto.opt_macaddr(section, ifc, translate("Override MAC address"))
+
+o = section:taboption("advanced", Value, "mtu", translate("Override MTU"))
+o.placeholder = "1500"
+o.datatype    = "max(9200)"
diff --git a/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_dslite.lua b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_dslite.lua
new file mode 100644
index 0000000000..2d9e258c32
--- /dev/null
+++ b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_dslite.lua
@@ -0,0 +1,62 @@
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright 2011 Jo-Philipp Wich <xm@subsignal.org>
+Copyright 2013 Steven Barth <steven@midlink.org>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+	http://www.apache.org/licenses/LICENSE-2.0
+]]--
+
+local map, section, net = ...
+
+local peeraddr, ip6addr
+local tunlink, defaultroute, metric, ttl, mtu
+
+
+
+
+peeraddr = section:taboption("general", Value, "peeraddr",
+	translate("DS-Lite AFTR address"))
+
+peeraddr.rmempty  = false
+peeraddr.datatype = "ip6addr"
+
+ip6addr = section:taboption("general", Value, "ip6addr",
+	translate("Local IPv6 address"),
+	translate("Leave empty to use the current WAN address"))
+
+ip6addr.datatype = "ip6addr"
+
+
+tunlink = section:taboption("advanced", DynamicList, "tunlink", translate("Tunnel Link"))
+tunlink.template = "cbi/network_netlist"
+tunlink.nocreate = true
+
+
+defaultroute = section:taboption("advanced", Flag, "defaultroute",
+	translate("Default gateway"),
+	translate("If unchecked, no default route is configured"))
+
+defaultroute.default = defaultroute.enabled
+
+
+metric = section:taboption("advanced", Value, "metric",
+	translate("Use gateway metric"))
+
+metric.placeholder = "0"
+metric.datatype    = "uinteger"
+metric:depends("defaultroute", defaultroute.enabled)
+
+
+ttl = section:taboption("advanced", Value, "ttl", translate("Use TTL on tunnel interface"))
+ttl.placeholder = "64"
+ttl.datatype    = "range(1,255)"
+
+
+mtu = section:taboption("advanced", Value, "mtu", translate("Use MTU on tunnel interface"))
+mtu.placeholder = "1280"
+mtu.datatype    = "max(9200)"
diff --git a/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_hnet.lua b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_hnet.lua
new file mode 100644
index 0000000000..0cf8c01017
--- /dev/null
+++ b/protocols/luci-proto-ipv6/luasrc/model/cbi/admin_network/proto_hnet.lua
@@ -0,0 +1,43 @@
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright 2013 Steven Barth <steven@midlink.org>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+	http://www.apache.org/licenses/LICENSE-2.0
+]]--
+
+local map, section, net = ...
+
+local mode = section:taboption("general", ListValue, "mode", translate("Category"))
+mode:value("auto", translate("Automatic"))
+mode:value("external", translate("External"))
+mode:value("guest", translate("Guest"))
+mode:value("adhoc", translate("Ad-Hoc"))
+mode.default = "auto"
+
+
+
+local plen = section:taboption("advanced", Value, "ip6assign", translate("IPv6 assignment length"),
+	translate("Assign a part of given length of every public IPv6-prefix to this interface"))
+plen.datatype = "max(128)"
+plen.default = "64"
+
+section:taboption("advanced", Value, "link_id", translate("IPv6 assignment hint"),
+	translate("Assign prefix parts using this hexadecimal subprefix ID for this interface."))
+
+plen = section:taboption("advanced", Value, "ip4assign", translate("IPv4 assignment length"))
+plen.datatype = "max(32)"
+plen.default = "24"
+
+local o = section:taboption("advanced", Value, "dnsname", translate("DNS-Label / FQDN"))
+o.default = map.name
+
+luci.tools.proto.opt_macaddr(section, ifc, translate("Override MAC address"))
+
+o = section:taboption("advanced", Value, "mtu", translate("Override MTU"))
+o.placeholder = "1500"
+o.datatype    = "max(9200)"