protocols: add client side protocol handler implementations

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

7 files changed, 540 insertions, 0 deletions

diff --git a/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/464xlat.js b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/464xlat.js
new file mode 100644
index 0000000000..a74708fd01
--- /dev/null
+++ b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/464xlat.js
@@ -0,0 +1,60 @@
+'use strict';
+'require form';
+'require network';
+'require tools.widgets as widgets';
+
+network.registerPatternVirtual(/^464-.+$/);
+network.registerErrorCode('CLAT_CONFIG_FAILED', _('CLAT configuration failed'));
+
+return network.registerProtocol('464xlat', {
+	getI18n: function() {
+		return _('464XLAT (CLAT)');
+	},
+
+	getIfname: function() {
+		return this._ubus('l3_device') || '464-%s'.format(this.sid);
+	},
+
+	getOpkgPackage: function() {
+		return '464xlat';
+	},
+
+	isFloating: function() {
+		return true;
+	},
+
+	isVirtual: function() {
+		return true;
+	},
+
+	getDevices: function() {
+		return null;
+	},
+
+	containsDevice: function(ifname) {
+		return (network.getIfnameOf(ifname) == this.getIfname());
+	},
+
+	renderFormOptions: function(s) {
+		var o;
+
+		o = s.taboption('general', form.Value, 'ip6prefix', _('NAT64 Prefix'), _('Leave empty to autodetect'));
+		o.datatype = 'cidr6';
+
+		o = s.taboption('advanced', widgets.NetworkSelect, 'tunlink', _('Tunnel Link'));
+		o.nocreate = true;
+		o.exclude  = s.section;
+
+		o = s.taboption('advanced', form.Flag, 'defaultroute', _('Default gateway'), _('If unchecked, no default route is configured'));
+		o.default = o.enabled;
+
+		o = s.taboption('advanced', form.Value, 'metric', _('Use gateway metric'));
+		o.placeholder = '0';
+		o.datatype    = 'uinteger';
+		o.depends('defaultroute', '1');
+
+		o = s.taboption('advanced', form.Value, 'mtu', _('Use MTU on tunnel interface'));
+		o.placeholder = '1280';
+		o.datatype    = 'max(9200)';
+	}
+});
diff --git a/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/6in4.js b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/6in4.js
new file mode 100644
index 0000000000..536dd5222b
--- /dev/null
+++ b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/6in4.js
@@ -0,0 +1,101 @@
+'use strict';
+'require uci';
+'require form';
+'require network';
+
+network.registerPatternVirtual(/^6in4-.+$/);
+
+return network.registerProtocol('6in4', {
+	getI18n: function() {
+		return _('IPv6-in-IPv4 (RFC4213)');
+	},
+
+	getIfname: function() {
+		return this._ubus('l3_device') || '6in4-%s'.format(this.sid);
+	},
+
+	getOpkgPackage: function() {
+		return '6in4';
+	},
+
+	isFloating: function() {
+		return true;
+	},
+
+	isVirtual: function() {
+		return true;
+	},
+
+	getDevices: function() {
+		return null;
+	},
+
+	containsDevice: function(ifname) {
+		return (network.getIfnameOf(ifname) == this.getIfname());
+	},
+
+	renderFormOptions: function(s) {
+		var o;
+
+		o = s.taboption('general', form.Value, 'ipaddr', _('Local IPv4 address'), _('Leave empty to use the current WAN address'));
+		o.datatype = 'ip4addr("nomask")';
+		o.load = function(section_id) {
+			return network.getWANNetworks().then(L.bind(function(nets) {
+				if (nets.length)
+					this.placeholder = nets[0].getIPAddr();
+				return form.Value.prototype.load.apply(this, [section_id]);
+			}, this));
+		};
+
+		o = s.taboption('general', form.Value, 'peeraddr', _('Remote IPv4 address'), _('This is usually the address of the nearest PoP operated by the tunnel broker'));
+		o.rmempty  = false;
+		o.datatype = 'ip4addr("nomask")';
+
+		o = s.taboption('general', form.Value, 'ip6addr', _('Local IPv6 address'), _('This is the local endpoint address assigned by the tunnel broker, it usually ends with <code>...:2/64</code>'));
+		o.datatype = 'cidr6';
+
+		o = s.taboption('general', form.DynamicList, 'ip6prefix', _('IPv6 routed prefix'), _('This is the prefix routed to you by the tunnel broker for use by clients'));
+		o.datatype = 'cidr6';
+
+		o = s.taboption('general', form.Flag, '_update', _('Dynamic tunnel'), _('Enable HE.net dynamic endpoint update'));
+		o.enabled  = '1';
+		o.disabled = '0';
+		o.write = function() {};
+		o.remove = function() {};
+		o.cfgvalue = function(section_id) {
+			return !isNaN(+uci.get('network', section_id, 'tunnelid')) ? this.enabled : this.disabled;
+		};
+
+		o = s.taboption('general', form.Value, 'tunnelid', _('Tunnel ID'));
+		o.datatype = 'uinteger';
+		o.depends('_update', '1');
+
+		o = s.taboption('general', form.Value, 'username', _('HE.net username'), _('This is the plain username for logging into the account'));
+		o.depends('_update', '1');
+		o.validate = function(section_id, value) {
+			if (/^[a-fA-F0-9]{32}$/.test(value))
+				return _('The HE.net endpoint update configuration changed, you must now use the plain username instead of the user ID!');
+			return true;
+		};
+
+		o = s.taboption('general', form.Value, 'password', _('HE.net password'), _('This is either the \'Update Key\' configured for the tunnel or the account password if no update key has been configured'));
+		o.password = true;
+		o.depends('_update', '1');
+
+		o = s.taboption('advanced', form.Flag, 'defaultroute', _('Default gateway'), _('If unchecked, no default route is configured'));
+		o.default = o.enabled;
+
+		o = s.taboption('advanced', form.Value, 'metric', _('Use gateway metric'));
+		o.placeholder = '0';
+		o.datatype    = 'uinteger';
+		o.depends('defaultroute', '1');
+
+		o = s.taboption('advanced', form.Value, 'ttl', _('Use TTL on tunnel interface'));
+		o.placeholder = '64';
+		o.datatype    = 'range(1,255)';
+
+		o = s.taboption('advanced', form.Value, 'mtu', _('Use MTU on tunnel interface'));
+		o.placeholder = '1280';
+		o.datatype    = 'max(9200)';
+	}
+});
diff --git a/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/6rd.js b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/6rd.js
new file mode 100644
index 0000000000..6a8f506bc9
--- /dev/null
+++ b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/6rd.js
@@ -0,0 +1,81 @@
+'use strict';
+'require form';
+'require network';
+
+network.registerPatternVirtual(/^6rd-.+$/);
+
+return network.registerProtocol('6rd', {
+	getI18n: function() {
+		return _('IPv6-over-IPv4 (6rd)');
+	},
+
+	getIfname: function() {
+		return this._ubus('l3_device') || '6rd-%s'.format(this.sid);
+	},
+
+	getOpkgPackage: function() {
+		return '6rd';
+	},
+
+	isFloating: function() {
+		return true;
+	},
+
+	isVirtual: function() {
+		return true;
+	},
+
+	getDevices: function() {
+		return null;
+	},
+
+	containsDevice: function(ifname) {
+		return (network.getIfnameOf(ifname) == this.getIfname());
+	},
+
+	renderFormOptions: function(s) {
+		var o;
+
+		o = s.taboption('general', form.Value, 'ipaddr', _('Local IPv4 address'), _('Leave empty to use the current WAN address'));
+		o.datatype = 'ip4addr("nomask")';
+		o.load = function(section_id) {
+			return network.getWANNetworks().then(L.bind(function(nets) {
+				if (nets.length)
+					this.placeholder = nets[0].getIPAddr();
+				return form.Value.prototype.load.apply(this, [section_id]);
+			}, this));
+		};
+
+		o = s.taboption('general', form.Value, 'peeraddr', _('Remote IPv4 address'), _('This IPv4 address of the relay'));
+		o.rmempty  = false;
+		o.datatype = 'ip4addr("nomask")';
+
+		o = s.taboption('general', form.Value, 'ip6prefix', _('IPv6 prefix'), _('The IPv6 prefix assigned to the provider, usually ends with <code>::</code>'));
+		o.rmempty  = false;
+		o.datatype = 'ip6addr';
+
+		o = s.taboption('general', form.Value, 'ip6prefixlen', _('IPv6 prefix length'), _('The length of the IPv6 prefix in bits'));
+		o.placeholder = '16';
+		o.datatype    = 'range(0,128)';
+
+		o = s.taboption('general', form.Value, 'ip4prefixlen', _('IPv4 prefix length'), _('The length of the IPv4 prefix in bits, the remainder is used in the IPv6 addresses.'));
+		o.placeholder = '0';
+		o.datatype    = 'range(0,32)';
+
+		o = s.taboption('advanced', form.Flag, 'defaultroute', _('Default gateway'), _('If unchecked, no default route is configured'));
+		o.default = o.enabled;
+
+		o = s.taboption('advanced', form.Value, 'metric', _('Use gateway metric'));
+		o.placeholder = '0';
+		o.datatype    = 'uinteger';
+		o.depends('defaultroute', '1');
+
+		o = s.taboption('advanced', form.Value, 'ttl', _('Use TTL on tunnel interface'));
+		o.placeholder = '64';
+		o.datatype    = 'range(1,255)';
+
+		o = s.taboption('advanced', form.Value, 'mtu', _('Use MTU on tunnel interface'));
+		o.placeholder = '1280';
+		o.datatype    = 'max(9200)';
+	}
+});
diff --git a/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/6to4.js b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/6to4.js
new file mode 100644
index 0000000000..abfe1c8fc4
--- /dev/null
+++ b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/6to4.js
@@ -0,0 +1,65 @@
+'use strict';
+'require form';
+'require network';
+
+network.registerPatternVirtual(/^6to4-.+$/);
+
+return network.registerProtocol('6to4', {
+	getI18n: function() {
+		return _('IPv6-over-IPv4 (6to4)');
+	},
+
+	getIfname: function() {
+		return this._ubus('l3_device') || '6to4-%s'.format(this.sid);
+	},
+
+	getOpkgPackage: function() {
+		return '6rd';
+	},
+
+	isFloating: function() {
+		return true;
+	},
+
+	isVirtual: function() {
+		return true;
+	},
+
+	getDevices: function() {
+		return null;
+	},
+
+	containsDevice: function(ifname) {
+		return (network.getIfnameOf(ifname) == this.getIfname());
+	},
+
+	renderFormOptions: function(s) {
+		var o;
+
+		o = s.taboption('general', form.Value, 'ipaddr', _('Local IPv4 address'), _('Leave empty to use the current WAN address'));
+		o.datatype = 'ip4addr("nomask")';
+		o.load = function(section_id) {
+			return network.getWANNetworks().then(L.bind(function(nets) {
+				if (nets.length)
+					this.placeholder = nets[0].getIPAddr();
+				return form.Value.prototype.load.apply(this, [section_id]);
+			}, this));
+		};
+
+		o = s.taboption('advanced', form.Flag, 'defaultroute', _('Default gateway'), _('If unchecked, no default route is configured'));
+		o.default = o.enabled;
+
+		o = s.taboption('advanced', form.Value, 'metric', _('Use gateway metric'));
+		o.placeholder = '0';
+		o.datatype    = 'uinteger';
+		o.depends('defaultroute', '1');
+
+		o = s.taboption('advanced', form.Value, 'ttl', _('Use TTL on tunnel interface'));
+		o.placeholder = '64';
+		o.datatype    = 'range(1,255)';
+
+		o = s.taboption('advanced', form.Value, 'mtu', _('Use MTU on tunnel interface'));
+		o.placeholder = '1280';
+		o.datatype    = 'max(9200)';
+	}
+});
diff --git a/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/dhcpv6.js b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/dhcpv6.js
new file mode 100644
index 0000000000..eba58f4248
--- /dev/null
+++ b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/dhcpv6.js
@@ -0,0 +1,58 @@
+'use strict';
+'require form';
+'require network';
+
+return network.registerProtocol('dhcpv6', {
+	getI18n: function() {
+		return _('DHCPv6 client');
+	},
+
+	getOpkgPackage: function() {
+		return 'odhcp6c';
+	},
+
+	renderFormOptions: function(s) {
+		var dev = this.getL2Device() || this.getDevice(), o;
+
+		o = s.taboption('general', form.ListValue, 'reqaddress', _('Request IPv6-address'));
+		o.value('try');
+		o.value('force');
+		o.value('none', 'disabled');
+		o.default = 'try';
+
+		o = s.taboption('general', form.Value, 'reqprefix', _('Request IPv6-prefix of length'));
+		o.value('auto', _('Automatic'));
+		o.value('no', _('disabled'));
+		o.value('48');
+		o.value('52');
+		o.value('56');
+		o.value('60');
+		o.value('64');
+		o.default = 'auto';
+
+		o = s.taboption('advanced', form.Flag, 'defaultroute', _('Use default gateway'), _('If unchecked, no default route is configured'));
+		o.default = o.enabled;
+
+		o = s.taboption('advanced', form.DynamicList, 'ip6prefix', _('Custom delegated IPv6-prefix'));
+		o.datatype = 'cidr6';
+
+		o = s.taboption('advanced', form.Flag, 'peerdns', _('Use DNS servers advertised by peer'), _('If unchecked, the advertised DNS server addresses are ignored'));
+		o.default = o.enabled;
+
+		o = s.taboption('advanced', form.DynamicList, 'dns', _('Use custom DNS servers'));
+		o.depends('peerdns', '0');
+		o.datatype = 'ipaddr';
+		o.cast     = 'string';
+
+		o = s.taboption('advanced', form.Value, 'clientid', _('Client ID to send when requesting DHCP'));
+		o.datatype  = 'hexstring';
+
+		o = s.taboption('advanced', form.Value, 'macaddr', _('Override MAC address'));
+		o.datatype = 'macaddr';
+		o.placeholder = dev ? (dev.getMAC() || '') : '';
+
+		o = s.taboption('advanced', form.Value, 'mtu', _('Override MTU'));
+		o.placeholder = dev ? (dev.getMTU() || '1500') : '1500';
+		o.datatype    = 'max(9200)';
+	}
+});
diff --git a/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/dslite.js b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/dslite.js
new file mode 100644
index 0000000000..fa0e68ddc3
--- /dev/null
+++ b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/dslite.js
@@ -0,0 +1,79 @@
+'use strict';
+'require form';
+'require network';
+'require tools.widgets as widgets';
+
+network.registerPatternVirtual(/^ds-.+$/);
+network.registerErrorCode('AFTR_DNS_FAIL', _('Unable to resolve AFTR host name'));
+
+return network.registerProtocol('dslite', {
+	getI18n: function() {
+		return _('Dual-Stack Lite (RFC6333)');
+	},
+
+	getIfname: function() {
+		return this._ubus('l3_device') || 'ds-%s'.format(this.sid);
+	},
+
+	getOpkgPackage: function() {
+		return 'ds-lite';
+	},
+
+	isFloating: function() {
+		return true;
+	},
+
+	isVirtual: function() {
+		return true;
+	},
+
+	getDevices: function() {
+		return null;
+	},
+
+	containsDevice: function(ifname) {
+		return (network.getIfnameOf(ifname) == this.getIfname());
+	},
+
+	renderFormOptions: function(s) {
+		var o;
+
+		o = s.taboption('general', form.Value, 'peeraddr', _('DS-Lite AFTR address'));
+		o.rmempty  = false;
+		o.datatype = 'or(hostname,ip6addr("nomask"))';
+
+		o = s.taboption('general', form.Value, 'ip6addr', _('Local IPv6 address'), _('Leave empty to use the current WAN address'));
+		o.datatype = 'ip6addr("nomask")';
+		o.load = function(section_id) {
+			return network.getWAN6Networks().then(L.bind(function(nets) {
+				if (Array.isArray(nets) && nets.length)
+					this.placeholder = nets[0].getIP6Addr();
+				return form.Value.prototype.load.apply(this, [section_id]);
+			}, this));
+		};
+
+		o = s.taboption('advanced', widgets.NetworkSelect, 'tunlink', _('Tunnel Link'));
+		o.nocreate = true;
+		o.exclude  = s.section;
+
+		o = s.taboption('advanced', form.ListValue, 'encaplimit', _('Encapsulation limit'));
+		o.rmempty  = false;
+		o.default  = 'ignore';
+		o.datatype = 'or("ignore",range(0,255))';
+		o.value('ignore', _('ignore'));
+		for (var i = 0; i < 256; i++)
+			o.value(i);
+
+		o = s.taboption('advanced', form.Flag, 'defaultroute', _('Default gateway'), _('If unchecked, no default route is configured'));
+		o.default = o.enabled;
+
+		o = s.taboption('advanced', form.Value, 'metric', _('Use gateway metric'));
+		o.placeholder = '0';
+		o.datatype    = 'uinteger';
+		o.depends('defaultroute', '1');
+
+		o = s.taboption('advanced', form.Value, 'mtu', _('Use MTU on tunnel interface'));
+		o.placeholder = '1280';
+		o.datatype    = 'max(9200)';
+	}
+});
diff --git a/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/map.js b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/map.js
new file mode 100644
index 0000000000..006ebfbf08
--- /dev/null
+++ b/protocols/luci-proto-ipv6/htdocs/luci-static/resources/protocol/map.js
@@ -0,0 +1,96 @@
+'use strict';
+'require form';
+'require network';
+'require tools.widgets as widgets';
+
+network.registerPatternVirtual(/^map-.+$/);
+network.registerErrorCode('INVALID_MAP_RULE', _('MAP rule is invalid'));
+network.registerErrorCode('NO_MATCHING_PD',   _('No matching prefix delegation'));
+network.registerErrorCode('UNSUPPORTED_TYPE', _('Unsupported MAP type'));
+
+return network.registerProtocol('map', {
+	getI18n: function() {
+		return _('MAP / LW4over6');
+	},
+
+	getIfname: function() {
+		return this._ubus('l3_device') || 'map-%s'.format(this.sid);
+	},
+
+	getOpkgPackage: function() {
+		return 'map-t';
+	},
+
+	isFloating: function() {
+		return true;
+	},
+
+	isVirtual: function() {
+		return true;
+	},
+
+	getDevices: function() {
+		return null;
+	},
+
+	containsDevice: function(ifname) {
+		return (network.getIfnameOf(ifname) == this.getIfname());
+	},
+
+	renderFormOptions: function(s) {
+		var o;
+
+		o = s.taboption('general', form.ListValue, 'type', _('Type'));
+		o.value('map-e', 'MAP-E');
+		o.value('map-t', 'MAP-T');
+		o.value('lw4o6', 'LW4over6');
+
+		o = s.taboption('general', form.Value, 'peeraddr', _('BR / DMR / AFTR'));
+		o.rmempty  = false;
+		o.datatype = 'ip6addr';
+
+		o = s.taboption('general', form.Value, 'ipaddr', _('IPv4 prefix'));
+		o.datatype = 'ip4addr';
+
+		o = s.taboption('general', form.Value, 'ip4prefixlen', _('IPv4 prefix length'), _('The length of the IPv4 prefix in bits, the remainder is used in the IPv6 addresses.'));
+		o.placeholder = '32';
+		o.datatype    = 'range(0,32)';
+
+		o = s.taboption('general', form.Value, 'ip6prefix', _('IPv6 prefix'), _('The IPv6 prefix assigned to the provider, usually ends with <code>::</code>'));
+		o.rmempty  = false;
+		o.datatype = 'ip6addr';
+
+		o = s.taboption('general', form.Value, 'ip6prefixlen', _('IPv6 prefix length'), _('The length of the IPv6 prefix in bits'));
+		o.placeholder = '16';
+		o.datatype    = 'range(0,64)';
+
+		o = s.taboption('general', form.Value, 'ealen', _('EA-bits length'));
+		o.datatype = 'range(0,48)';
+
+		o = s.taboption('general', form.Value, 'psidlen', _('PSID-bits length'));
+		o.datatype = 'range(0,16)';
+
+		o = s.taboption('general', form.Value, 'offset', _('PSID offset'));
+		o.datatype = 'range(0,16)';
+
+		o = s.taboption('advanced', widgets.NetworkSelect, 'tunlink', _('Tunnel Link'));
+		o.nocreate = true;
+		o.exclude  = s.section;
+
+		o = s.taboption('advanced', form.Flag, 'defaultroute', _('Default gateway'), _('If unchecked, no default route is configured'));
+		o.default = o.enabled;
+
+		o = s.taboption('advanced', form.Value, 'metric', _('Use gateway metric'));
+		o.placeholder = '0';
+		o.datatype    = 'uinteger';
+		o.depends('defaultroute', '1');
+
+		o = s.taboption('advanced', form.Value, 'ttl', _('Use TTL on tunnel interface'));
+		o.placeholder = '64';
+		o.datatype    = 'range(1,255)';
+
+		o = s.taboption('advanced', form.Value, 'mtu', _('Use MTU on tunnel interface'));
+		o.placeholder = '1280';
+		o.datatype    = 'max(9200)';
+	}
+});