Rework LuCI build system

 * Rename subdirectories to their repective OpenWrt package names
 * Make each LuCI module its own standalone package
 * Deploy a shared luci.mk which is used by each module Makefile

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

2 files changed, 167 insertions, 0 deletions

diff --git a/protocols/luci-proto-3g/Makefile b/protocols/luci-proto-3g/Makefile
new file mode 100644
index 000000000..d1d5455dc
--- /dev/null
+++ b/protocols/luci-proto-3g/Makefile
@@ -0,0 +1,14 @@
+#
+# Copyright (C) 2008-2014 The LuCI Team <luci@lists.subsignal.org>
+#
+# This is free software, licensed under the Apache License, Version 2.0 .
+#
+
+include $(TOPDIR)/rules.mk
+
+LUCI_TITLE:=Support for 3G
+LUCI_DEPENDS:=+comgt
+
+include ../../luci.mk
+
+# call BuildPackage - OpenWrt buildroot signature
diff --git a/protocols/luci-proto-3g/luasrc/model/cbi/admin_network/proto_3g.lua b/protocols/luci-proto-3g/luasrc/model/cbi/admin_network/proto_3g.lua
new file mode 100644
index 000000000..9c1a76282
--- /dev/null
+++ b/protocols/luci-proto-3g/luasrc/model/cbi/admin_network/proto_3g.lua
@@ -0,0 +1,153 @@
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright 2011 Jo-Philipp Wich <xm@subsignal.org>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+	http://www.apache.org/licenses/LICENSE-2.0
+]]--
+
+local map, section, net = ...
+
+local device, apn, service, pincode, username, password
+local ipv6, maxwait, defaultroute, metric, peerdns, dns,
+      keepalive_failure, keepalive_interval, demand
+
+
+device = section:taboption("general", Value, "device", translate("Modem device"))
+device.rmempty = false
+
+local device_suggestions = nixio.fs.glob("/dev/tty[A-Z]*")
+	or nixio.fs.glob("/dev/tts/*")
+
+if device_suggestions then
+	local node
+	for node in device_suggestions do
+		device:value(node)
+	end
+end
+
+
+service = section:taboption("general", Value, "service", translate("Service Type"))
+service:value("", translate("-- Please choose --"))
+service:value("umts", "UMTS/GPRS")
+service:value("umts_only", translate("UMTS only"))
+service:value("gprs_only", translate("GPRS only"))
+service:value("evdo", "CDMA/EV-DO")
+
+
+apn = section:taboption("general", Value, "apn", translate("APN"))
+
+
+pincode = section:taboption("general", Value, "pincode", translate("PIN"))
+
+
+username = section:taboption("general", Value, "username", translate("PAP/CHAP username"))
+
+
+password = section:taboption("general", Value, "password", translate("PAP/CHAP password"))
+password.password = true
+
+
+if luci.model.network:has_ipv6() then
+
+	ipv6 = section:taboption("advanced", Flag, "ipv6",
+		translate("Enable IPv6 negotiation on the PPP link"))
+
+	ipv6.default = ipv6.disabled
+
+end
+
+
+maxwait = section:taboption("advanced", Value, "maxwait",
+	translate("Modem init timeout"),
+	translate("Maximum amount of seconds to wait for the modem to become ready"))
+
+maxwait.placeholder = "20"
+maxwait.datatype    = "min(1)"
+
+
+defaultroute = section:taboption("advanced", Flag, "defaultroute",
+	translate("Use default gateway"),
+	translate("If unchecked, no default route is configured"))
+
+defaultroute.default = defaultroute.enabled
+
+
+metric = section:taboption("advanced", Value, "metric",
+	translate("Use gateway metric"))
+
+metric.placeholder = "0"
+metric.datatype    = "uinteger"
+metric:depends("defaultroute", defaultroute.enabled)
+
+
+peerdns = section:taboption("advanced", Flag, "peerdns",
+	translate("Use DNS servers advertised by peer"),
+	translate("If unchecked, the advertised DNS server addresses are ignored"))
+
+peerdns.default = peerdns.enabled
+
+
+dns = section:taboption("advanced", DynamicList, "dns",
+	translate("Use custom DNS servers"))
+
+dns:depends("peerdns", "")
+dns.datatype = "ipaddr"
+dns.cast     = "string"
+
+
+keepalive_failure = section:taboption("advanced", Value, "_keepalive_failure",
+	translate("LCP echo failure threshold"),
+	translate("Presume peer to be dead after given amount of LCP echo failures, use 0 to ignore failures"))
+
+function keepalive_failure.cfgvalue(self, section)
+	local v = m:get(section, "keepalive")
+	if v and #v > 0 then
+		return tonumber(v:match("^(%d+)[ ,]+%d+") or v)
+	end
+end
+
+function keepalive_failure.write() end
+function keepalive_failure.remove() end
+
+keepalive_failure.placeholder = "0"
+keepalive_failure.datatype    = "uinteger"
+
+
+keepalive_interval = section:taboption("advanced", Value, "_keepalive_interval",
+	translate("LCP echo interval"),
+	translate("Send LCP echo requests at the given interval in seconds, only effective in conjunction with failure threshold"))
+
+function keepalive_interval.cfgvalue(self, section)
+	local v = m:get(section, "keepalive")
+	if v and #v > 0 then
+		return tonumber(v:match("^%d+[ ,]+(%d+)"))
+	end
+end
+
+function keepalive_interval.write(self, section, value)
+	local f = tonumber(keepalive_failure:formvalue(section)) or 0
+	local i = tonumber(value) or 5
+	if i < 1 then i = 1 end
+	if f > 0 then
+		m:set(section, "keepalive", "%d %d" %{ f, i })
+	else
+		m:del(section, "keepalive")
+	end
+end
+
+keepalive_interval.remove      = keepalive_interval.write
+keepalive_interval.placeholder = "5"
+keepalive_interval.datatype    = "min(1)"
+
+
+demand = section:taboption("advanced", Value, "demand",
+	translate("Inactivity timeout"),
+	translate("Close inactive connection after the given amount of seconds, use 0 to persist connection"))
+
+demand.placeholder = "0"
+demand.datatype    = "uinteger"