po: Update olsr, again

13 files changed, 133 insertions, 23 deletions

diff --git a/po/ca/olsr.po b/po/ca/olsr.po
index 0e8ada904..1068e43f9 100644
--- a/po/ca/olsr.po
+++ b/po/ca/olsr.po
@@ -389,6 +389,9 @@ msgstr ""
 msgid "SmartGW announcements"
 msgstr ""
 
+msgid "SmartGateway is not configured on this system."
+msgstr ""
+
 msgid "Source address"
 msgstr ""
 
diff --git a/po/de/olsr.po b/po/de/olsr.po
index ce7a550c3..80fc4a731 100644
--- a/po/de/olsr.po
+++ b/po/de/olsr.po
@@ -60,7 +60,13 @@ msgstr "Zu erwartende Sendeversuche pro Paket"
 msgid "FIB metric"
 msgstr "FIB-Metrik"
 
-msgid "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" means that the metric value is always 2. This is the preferred value because it helps the linux kernel routing to clean up older routes. \"correct\" uses the hopcount as the metric value. \"approx\" use the hopcount as the metric value too, but does only update the hopcount if the nexthop changes too. Default is \"flat\"."
+msgid ""
+"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
+"means that the metric value is always 2. This is the preferred value because "
+"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"value too, but does only update the hopcount if the nexthop changes too. "
+"Default is \"flat\"."
 msgstr ""
 
 msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
@@ -99,13 +105,18 @@ msgstr ""
 msgid "Hostname"
 msgstr ""
 
-msgid "Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more robustness to the link sensing but delays neighbor registration. Defaults is \"yes\""
+msgid ""
+"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
+"robustness to the link sensing but delays neighbor registration. Defaults is "
+"\"yes\""
 msgstr ""
 
 msgid "IP Addresses"
 msgstr ""
 
-msgid "IP-version to use. If 6and4 is selected then one olsrd instance is started for each protocol."
+msgid ""
+"IP-version to use. If 6and4 is selected then one olsrd instance is started "
+"for each protocol."
 msgstr ""
 
 msgid "IPv4"
@@ -114,13 +125,18 @@ msgstr ""
 msgid "IPv4 broadcast"
 msgstr "IPv4 Broadcast"
 
-msgid "IPv4 broadcast address for outgoing OLSR packets. One useful example would be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the interface broadcast IP."
+msgid ""
+"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
+"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
+"interface broadcast IP."
 msgstr ""
 
 msgid "IPv4 source"
 msgstr ""
 
-msgid "IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which triggers usage of the interface IP."
+msgid ""
+"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
+"triggers usage of the interface IP."
 msgstr ""
 
 msgid "IPv6"
@@ -129,22 +145,35 @@ msgstr ""
 msgid "IPv6 multicast"
 msgstr ""
 
-msgid "IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal multicast."
+msgid ""
+"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
+"multicast."
 msgstr ""
 
 msgid "IPv6 source"
 msgstr ""
 
-msgid "IPv6 src prefix. OLSRd will choose one of the interface IPs which matches the prefix of this parameter. Default is \"0::/0\", which triggers the usage of a not-linklocal interface IP."
+msgid ""
+"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
+"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
+"of a not-linklocal interface IP."
 msgstr ""
 
-msgid "If the route to the current gateway is to be changed, the ETX value of this gateway is multiplied with this value before it is compared to the new one. The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 if changed.<br /><b>WARNING:</b> This parameter should not be used together with the etx_ffeth metric!<br />Defaults to \"1.0\"."
+msgid ""
+"If the route to the current gateway is to be changed, the ETX value of this "
+"gateway is multiplied with this value before it is compared to the new one. "
+"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
+"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
+"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
 msgstr ""
 
 msgid "Interface"
 msgstr ""
 
-msgid "Interface Mode is used to prevent unnecessary packet forwarding on switched ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is \"mesh\"."
+msgid ""
+"Interface Mode is used to prevent unnecessary packet forwarding on switched "
+"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
+"\"mesh\"."
 msgstr ""
 
 msgid "Interfaces"
@@ -156,7 +185,9 @@ msgstr ""
 msgid "Internet protocol"
 msgstr "Internet Protokoll"
 
-msgid "Interval to poll network interfaces for configuration changes (in seconds). Default is \"2.5\"."
+msgid ""
+"Interval to poll network interfaces for configuration changes (in seconds). "
+"Default is \"2.5\"."
 msgstr ""
 
 msgid "Known OLSR routes"
@@ -186,13 +217,25 @@ msgstr "Bibliothek"
 msgid "Link Quality Settings"
 msgstr ""
 
-msgid "Link quality aging factor (only for lq level 2). Tuning parameter for etx_float and etx_fpm, smaller values mean slower changes of ETX value. (allowed values are between 0.01 and 1.0)"
+msgid ""
+"Link quality aging factor (only for lq level 2). Tuning parameter for "
+"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
+"(allowed values are between 0.01 and 1.0)"
 msgstr ""
 
-msgid "Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as ext_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an etx variant which use all OLSR traffic (instead of only hellos) for ETX calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
+msgid ""
+"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
+"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
+"ext_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
+"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
+"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
+"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
 msgstr ""
 
-msgid "Link quality level switch between hopcount and cost-based (mostly ETX) routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link quality for MPR selection and routing<br />Default is \"2\""
+msgid ""
+"Link quality level switch between hopcount and cost-based (mostly ETX) "
+"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
+"quality for MPR selection and routing<br />Default is \"2\""
 msgstr ""
 
 msgid "LinkQuality Multiplicator"
@@ -222,8 +265,12 @@ msgstr ""
 msgid "Main IP"
 msgstr ""
 
-msgid "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr "Stellen Sie sicher das OLSRd läuft und das \"txtinfo\" Plugin auf Port 2006 geladen und \"127.0.0.1\" als Accept-Host gesetzt ist."
+msgid ""
+"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
+"configured on port 2006 and accepts connections from \"127.0.0.1\"."
+msgstr ""
+"Stellen Sie sicher das OLSRd läuft und das \"txtinfo\" Plugin auf Port 2006 "
+"geladen und \"127.0.0.1\" als Accept-Host gesetzt ist."
 
 msgid "Metric"
 msgstr ""
@@ -231,7 +278,11 @@ msgstr ""
 msgid "Mode"
 msgstr ""
 
-msgid "Multiply routes with the factor given here. Allowed values are between 0.01 and 1. It is only used when LQ-Level is greater than 0. Examples:<br />reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all nodes on this interface by 20%: default 0.8"
+msgid ""
+"Multiply routes with the factor given here. Allowed values are between 0.01 "
+"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
+">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
+"nodes on this interface by 20%: default 0.8"
 msgstr ""
 
 msgid "NAT threshold"
@@ -327,12 +378,18 @@ msgstr ""
 msgid "Secondary OLSR interfaces"
 msgstr "Sekundäre OLSR Schnittstellen"
 
-msgid "Sets the main IP (originator ip) of the router. This IP will NEVER change during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the IP of the first interface."
+msgid ""
+"Sets the main IP (originator ip) of the router. This IP will NEVER change "
+"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
+"IP of the first interface."
 msgstr ""
 
 msgid "SmartGW announcements"
 msgstr "Smart Gateway Ankündigungen"
 
+msgid "SmartGateway is not configured on this system."
+msgstr ""
+
 msgid "Source address"
 msgstr ""
 
@@ -360,16 +417,25 @@ msgstr "TC-Gültigkeit"
 msgid "TOS value"
 msgstr ""
 
-msgid "The OLSR daemon is an implementation of the Optimized Link State Routing protocol. As such it allows mesh routing for any network equipment. It runs on any wifi card that supports ad-hoc mode and of course on any ethernet device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and documentation."
+msgid ""
+"The OLSR daemon is an implementation of the Optimized Link State Routing "
+"protocol. As such it allows mesh routing for any network equipment. It runs "
+"on any wifi card that supports ad-hoc mode and of course on any ethernet "
+"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
+"documentation."
 msgstr ""
 
-msgid "The fixed willingness to use. If not set willingness will be calculated dynamically based on battery/power status. Default is \"3\"."
+msgid ""
+"The fixed willingness to use. If not set willingness will be calculated "
+"dynamically based on battery/power status. Default is \"3\"."
 msgstr ""
 
 msgid "The interface OLSRd should serve."
 msgstr ""
 
-msgid "The port OLSR uses. This should usually stay at the IANA assigned port 698. It can have a value between 1 and 65535."
+msgid ""
+"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
+"It can have a value between 1 and 65535."
 msgstr ""
 
 msgid "Timing and Validity"
@@ -378,7 +444,9 @@ msgstr ""
 msgid "Topologie"
 msgstr ""
 
-msgid "Type of service value for the IP header of control traffic. Default is \"16\"."
+msgid ""
+"Type of service value for the IP header of control traffic. Default is "
+"\"16\"."
 msgstr ""
 
 msgid "Unable to connect to the OLSR daemon!"
@@ -399,9 +467,15 @@ msgstr ""
 msgid "Weight"
 msgstr ""
 
-msgid "When multiple links exist between hosts the weight of interface is used to determine the link to use. Normally the weight is automatically calculated by olsrd based on the characteristics of the interface, but here you can specify a fixed value. Olsrd will choose links with the lowest value.<br /><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to 0. For any other value of LinkQualityLevel, the interface ETX value is used instead."
+msgid ""
+"When multiple links exist between hosts the weight of interface is used to "
+"determine the link to use. Normally the weight is automatically calculated "
+"by olsrd based on the characteristics of the interface, but here you can "
+"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
+"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
+"0. For any other value of LinkQualityLevel, the interface ETX value is used "
+"instead."
 msgstr ""
 
 msgid "Willingness"
 msgstr "Bereitschaft"
-
diff --git a/po/el/olsr.po b/po/el/olsr.po
index 020475cac..800907549 100644
--- a/po/el/olsr.po
+++ b/po/el/olsr.po
@@ -386,6 +386,9 @@ msgstr ""
 msgid "SmartGW announcements"
 msgstr ""
 
+msgid "SmartGateway is not configured on this system."
+msgstr ""
+
 msgid "Source address"
 msgstr ""
 
diff --git a/po/en/olsr.po b/po/en/olsr.po
index c06075b61..7afd0f099 100644
--- a/po/en/olsr.po
+++ b/po/en/olsr.po
@@ -388,6 +388,9 @@ msgstr ""
 msgid "SmartGW announcements"
 msgstr ""
 
+msgid "SmartGateway is not configured on this system."
+msgstr ""
+
 msgid "Source address"
 msgstr ""
 
diff --git a/po/es/olsr.po b/po/es/olsr.po
index 9d6611145..1c7bf0ea4 100644
--- a/po/es/olsr.po
+++ b/po/es/olsr.po
@@ -388,6 +388,9 @@ msgstr ""
 msgid "SmartGW announcements"
 msgstr ""
 
+msgid "SmartGateway is not configured on this system."
+msgstr ""
+
 msgid "Source address"
 msgstr ""
 
diff --git a/po/fr/olsr.po b/po/fr/olsr.po
index cf306c1ff..1e7f3fd01 100644
--- a/po/fr/olsr.po
+++ b/po/fr/olsr.po
@@ -386,6 +386,9 @@ msgstr ""
 msgid "SmartGW announcements"
 msgstr ""
 
+msgid "SmartGateway is not configured on this system."
+msgstr ""
+
 msgid "Source address"
 msgstr ""
 
diff --git a/po/it/olsr.po b/po/it/olsr.po
index cf306c1ff..1e7f3fd01 100644
--- a/po/it/olsr.po
+++ b/po/it/olsr.po
@@ -386,6 +386,9 @@ msgstr ""
 msgid "SmartGW announcements"
 msgstr ""
 
+msgid "SmartGateway is not configured on this system."
+msgstr ""
+
 msgid "Source address"
 msgstr ""
 
diff --git a/po/ja/olsr.po b/po/ja/olsr.po
index cf306c1ff..1e7f3fd01 100644
--- a/po/ja/olsr.po
+++ b/po/ja/olsr.po
@@ -386,6 +386,9 @@ msgstr ""
 msgid "SmartGW announcements"
 msgstr ""
 
+msgid "SmartGateway is not configured on this system."
+msgstr ""
+
 msgid "Source address"
 msgstr ""
 
diff --git a/po/pt/olsr.po b/po/pt/olsr.po
index ae06b368d..f730f9b91 100644
--- a/po/pt/olsr.po
+++ b/po/pt/olsr.po
@@ -392,6 +392,9 @@ msgstr ""
 msgid "SmartGW announcements"
 msgstr ""
 
+msgid "SmartGateway is not configured on this system."
+msgstr ""
+
 msgid "Source address"
 msgstr ""
 
diff --git a/po/pt_BR/olsr.po b/po/pt_BR/olsr.po
index 044d5cff2..644d4a2be 100644
--- a/po/pt_BR/olsr.po
+++ b/po/pt_BR/olsr.po
@@ -392,6 +392,9 @@ msgstr ""
 msgid "SmartGW announcements"
 msgstr ""
 
+msgid "SmartGateway is not configured on this system."
+msgstr ""
+
 msgid "Source address"
 msgstr ""
 
diff --git a/po/ru/olsr.po b/po/ru/olsr.po
index cf306c1ff..1e7f3fd01 100644
--- a/po/ru/olsr.po
+++ b/po/ru/olsr.po
@@ -386,6 +386,9 @@ msgstr ""
 msgid "SmartGW announcements"
 msgstr ""
 
+msgid "SmartGateway is not configured on this system."
+msgstr ""
+
 msgid "Source address"
 msgstr ""
 
diff --git a/po/templates/olsr.pot b/po/templates/olsr.pot
index 585be9c59..36698d949 100644
--- a/po/templates/olsr.pot
+++ b/po/templates/olsr.pot
@@ -374,6 +374,9 @@ msgstr ""
 msgid "SmartGW announcements"
 msgstr ""
 
+msgid "SmartGateway is not configured on this system."
+msgstr ""
+
 msgid "Source address"
 msgstr ""
 
diff --git a/po/vi/olsr.po b/po/vi/olsr.po
index f16ef8d1f..669c655eb 100644
--- a/po/vi/olsr.po
+++ b/po/vi/olsr.po
@@ -390,6 +390,9 @@ msgstr ""
 msgid "SmartGW announcements"
 msgstr ""
 
+msgid "SmartGateway is not configured on this system."
+msgstr ""
+
 msgid "Source address"
 msgstr ""