luci/po: spelling and grammar fixes by Alex Henrie

8 files changed, 68 insertions, 31 deletions

diff --git a/po/ro/ahcp.po b/po/ro/ahcp.po
index 263c060ed..2882b31fd 100644
--- a/po/ro/ahcp.po
+++ b/po/ro/ahcp.po
@@ -15,9 +15,10 @@ msgstr ""
 msgid "AHCP Server"
 msgstr "Server AHCP"
 
+#, fuzzy
 msgid ""
 "AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
+"networks designed to be used in place of router discovery or DHCP on "
 "networks where it is difficult or impossible to configure a server within "
 "every link-layer broadcast domain, for example mobile ad-hoc networks."
 msgstr ""
diff --git a/po/ro/base.po b/po/ro/base.po
index 2a9bd31e0..36a9b1ff4 100644
--- a/po/ro/base.po
+++ b/po/ro/base.po
@@ -807,7 +807,7 @@ msgid "Expires"
 msgstr "Expira"
 
 msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
+"Expiry time of leased addresses, minimum is 2 minutes (<code>2m</code>)."
 msgstr ""
 
 msgid "External"
@@ -1218,9 +1218,10 @@ msgstr ""
 msgid "Invalid username and/or password! Please try again."
 msgstr "Utilizator si/sau parola invalide! Incearcati din nou."
 
+#, fuzzy
 msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
+"It appears that you are trying to flash an image that does not fit into the "
+"flash memory, please verify the image file!"
 msgstr ""
 "Se pare ca ai incercat sa rescrii o imagine care nu are loc in memoria "
 "flash, verifica fisierul din nou!"
@@ -1357,8 +1358,8 @@ msgid "Local domain"
 msgstr "Domeniu local"
 
 msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
+"Local domain specification. Names matching this domain are never forwarded "
+"and are resolved from DHCP or hosts files only"
 msgstr ""
 
 msgid "Local domain suffix appended to DHCP names and hosts file entries"
@@ -1903,13 +1904,13 @@ msgid "Really reset all changes?"
 msgstr ""
 
 msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
+"Really shut down network?\\nYou might lose access to this device if you are "
+"connected via this interface."
 msgstr ""
 
 msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
+"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
+"you are connected via this interface."
 msgstr ""
 
 msgid "Really switch protocol?"
@@ -2111,12 +2112,13 @@ msgstr "Tip de serviciu"
 msgid "Services"
 msgstr "Servicii"
 
+#, fuzzy
+msgid "Set up Time Synchronization"
+msgstr "Configurare sincronizare timp"
+
 msgid "Setup DHCP Server"
 msgstr "Seteaza serverul DHCP"
 
-msgid "Setup Time Synchronization"
-msgstr "Configurare sincronizare timp"
-
 msgid "Show current backup file list"
 msgstr ""
 
@@ -2160,7 +2162,7 @@ msgid "Sorry, the server encountered an unexpected error."
 msgstr ""
 
 msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
+"Sorry, there is no sysupgrade support present; a new firmware image must be "
 "flashed manually. Please refer to the OpenWrt wiki for device specific "
 "install instructions."
 msgstr ""
@@ -2300,10 +2302,10 @@ msgstr "Termina"
 
 msgid ""
 "The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
+"radio hardware such as channel, transmit power or antenna selection which "
+"are shared among all defined wireless networks (if the radio hardware is "
+"multi-SSID capable). Per network settings like encryption or operation mode "
+"are grouped in the <em>Interface Configuration</em>."
 msgstr ""
 
 msgid ""
@@ -2355,8 +2357,8 @@ msgid "The given network name is not unique"
 msgstr ""
 
 msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
+"The hardware is not multi-SSID capable and the existing configuration will "
+"be replaced if you proceed."
 msgstr ""
 
 msgid ""
@@ -2386,7 +2388,7 @@ msgstr ""
 
 msgid ""
 "The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
+"few minutes before you try to reconnect. It might be necessary to renew the "
 "address of your computer to reach the device again, depending on your "
 "settings."
 msgstr ""
diff --git a/po/ro/firewall.po b/po/ro/firewall.po
index 759f77d45..391b949dc 100644
--- a/po/ro/firewall.po
+++ b/po/ro/firewall.po
@@ -358,7 +358,7 @@ msgid ""
 "<em>output</em> options set the default policies for traffic entering and "
 "leaving this zone while the <em>forward</em> option describes the policy for "
 "forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
+"networks</em> specifies which available networks are members of this zone."
 msgstr ""
 
 msgid "To %s at %s on <var>this device</var>"
diff --git a/po/ro/meshwizard.po b/po/ro/meshwizard.po
index 6ad513629..9f1c46656 100644
--- a/po/ro/meshwizard.po
+++ b/po/ro/meshwizard.po
@@ -66,8 +66,8 @@ msgid "Mesh Wizard"
 msgstr ""
 
 msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
+"Note: this will set up this interface for mesh operation, i.e. add it to "
+"zone 'freifunk' and enable olsr."
 msgstr ""
 
 msgid "Protect LAN"
diff --git a/po/ro/olsr.po b/po/ro/olsr.po
index a40232f45..257fab373 100644
--- a/po/ro/olsr.po
+++ b/po/ro/olsr.po
@@ -51,6 +51,9 @@ msgstr ""
 msgid "Can only be a valid IPv4 or IPv6 address or 'default'"
 msgstr ""
 
+msgid "Can only be a valid IPv6 address or 'default'"
+msgstr ""
+
 msgid "Configuration"
 msgstr "Configuraţie"
 
@@ -133,6 +136,9 @@ msgstr ""
 msgid "HNA validity time"
 msgstr ""
 
+msgid "HNA6 Announcements"
+msgstr ""
+
 msgid "Hello"
 msgstr ""
 
@@ -166,6 +172,11 @@ msgid ""
 msgstr ""
 
 msgid ""
+"Hosts in a OLSR routed network can announce connecitivity to external "
+"networks using HNA6 messages."
+msgstr ""
+
+msgid ""
 "Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
 "robustness to the link sensing but delays neighbor registration. Defaults is "
 "\"yes\""
@@ -370,6 +381,13 @@ msgid ""
 "nodes on this interface by 20%: default 0.8"
 msgstr ""
 
+msgid ""
+"Multiply routes with the factor given here. Allowed values are between 0.01 "
+"and 1.0. It is only used when LQ-Level is greater than 0. Examples:<br /"
+">reduce LQ to fd91:662e:3c58::1 by half: fd91:662e:3c58::1 0.5<br />reduce "
+"LQ to all nodes on this interface by 20%: default 0.8"
+msgstr ""
+
 msgid "NAT threshold"
 msgstr ""
 
@@ -409,6 +427,9 @@ msgstr ""
 msgid "OLSR - HNA-Announcements"
 msgstr ""
 
+msgid "OLSR - HNA6-Announcements"
+msgstr ""
+
 msgid "OLSR - Plugins"
 msgstr ""
 
@@ -496,6 +517,12 @@ msgid ""
 "IP of the first interface."
 msgstr ""
 
+msgid ""
+"Sets the main IP (originator ip) of the router. This IP will NEVER change "
+"during the uptime of olsrd. Default is ::, which triggers usage of the IP of "
+"the first interface."
+msgstr ""
+
 msgid "Show IPv4"
 msgstr "Arată IPv4"
 
@@ -645,6 +672,12 @@ msgid ""
 "Default setting is \"both\"."
 msgstr ""
 
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA6 ::ffff:0:0/96 or 2000::/3. Default "
+"setting is \"both\"."
+msgstr ""
+
 msgid "Willingness"
 msgstr ""
 
diff --git a/po/ro/watchcat.po b/po/ro/watchcat.po
index adb42c481..cda0911bb 100644
--- a/po/ro/watchcat.po
+++ b/po/ro/watchcat.po
@@ -46,12 +46,12 @@ msgid "Watchcat"
 msgstr ""
 
 msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
+"Watchcat allows configuring a periodic reboot when the Internet connection "
+"has been lost for a certain period of time."
 msgstr ""
 
 msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
+"When rebooting the system, the watchcat will trigger a soft reboot. Entering "
+"a non zero value here will trigger a delayed hard reboot if the soft reboot "
 "fails. Enter a number of seconds to enable, use 0 to disable"
 msgstr ""
diff --git a/po/ro/wol.po b/po/ro/wol.po
index 26946e361..154a3f9fb 100644
--- a/po/ro/wol.po
+++ b/po/ro/wol.po
@@ -28,8 +28,9 @@ msgstr "Statie pentru \"trezire\""
 msgid "Network interface to use"
 msgstr "Interfata de retea pentru utilizare"
 
+#, fuzzy
 msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
+"Sometimes only one of the two tools works. If one fails, try the other one"
 msgstr ""
 "Uneori doar una dintre metode functioneaza. Daca se intampla, incearc-o pe "
 "cealalta"
diff --git a/po/ro/wshaper.po b/po/ro/wshaper.po
index 0806d09c5..d2569f6d2 100644
--- a/po/ro/wshaper.po
+++ b/po/ro/wshaper.po
@@ -51,6 +51,6 @@ msgid "Wondershaper settings"
 msgstr ""
 
 msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
+"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
+"even when your internet connection is highly saturated."
 msgstr ""