po: resync with source code

10 files changed, 333 insertions, 94 deletions

diff --git a/po/en/base.po b/po/en/base.po
index a268751dba..f75e26ef8f 100644
--- a/po/en/base.po
+++ b/po/en/base.po
@@ -40,12 +40,6 @@ msgstr "1 Minute Load:"
 msgid "15 Minute Load:"
 msgstr "15 Minute Load:"
 
-msgid "40MHz 2nd channel above"
-msgstr "40MHz 2nd channel above"
-
-msgid "40MHz 2nd channel below"
-msgstr "40MHz 2nd channel below"
-
 msgid "5 Minute Load:"
 msgstr "5 Minute Load:"
 
@@ -87,6 +81,9 @@ msgstr ""
 msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
 msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
 
+msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Suffix (hex)"
+msgstr ""
+
 msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
 msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
 
@@ -116,6 +113,12 @@ msgstr "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
 msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
 msgstr ""
 
+msgid "ADSL"
+msgstr ""
+
+msgid "ADSL Status"
+msgstr ""
+
 msgid "APN"
 msgstr "APN"
 
@@ -146,9 +149,6 @@ msgstr ""
 msgid "ATM device number"
 msgstr "ATM device number"
 
-msgid "Accept router advertisements"
-msgstr "Accept router advertisements"
-
 msgid "Access Concentrator"
 msgstr "Access Concentrator"
 
@@ -182,6 +182,9 @@ msgstr ""
 msgid "Ad-Hoc"
 msgstr "Ad-Hoc"
 
+msgid "Ad-hoc mode"
+msgstr ""
+
 msgid "Add"
 msgstr "Add"
 
@@ -206,12 +209,6 @@ msgstr "Administration"
 msgid "Advanced Settings"
 msgstr "Advanced Settings"
 
-msgid "Advertise IPv6 on network"
-msgstr "Advertise IPv6 on network"
-
-msgid "Advertised network ID"
-msgstr "Advertised network ID"
-
 msgid "Alert"
 msgstr "Alert"
 
@@ -241,8 +238,8 @@ msgid ""
 msgstr ""
 "Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
 
-msgid "Allowed range is 1 to 65535"
-msgstr "Allowed range is 1 to 65535"
+msgid "Always announce default router"
+msgstr ""
 
 msgid ""
 "Always use 40MHz channels even if the secondary channel overlaps. Using this "
@@ -252,6 +249,15 @@ msgstr ""
 msgid "An additional network will be created if you leave this unchecked."
 msgstr "An additional network will be created if you leave this unchecked."
 
+msgid "Announce as default router even if no public prefix is available."
+msgstr ""
+
+msgid "Announced DNS domains"
+msgstr ""
+
+msgid "Announced DNS servers"
+msgstr ""
+
 msgid "Antenna 1"
 msgstr "Antenna 1"
 
@@ -270,9 +276,17 @@ msgstr "Apply"
 msgid "Applying changes"
 msgstr "Applying changes"
 
+msgid ""
+"Assign a part of given length of every public IPv6-prefix to this interface"
+msgstr ""
+
 msgid "Assign interfaces..."
 msgstr "Assign interfaces..."
 
+msgid ""
+"Assign prefix parts using this hexadecimal subprefix ID for this interface."
+msgstr ""
+
 msgid "Associated Stations"
 msgstr "Associated Stations"
 
@@ -291,6 +305,9 @@ msgstr "Authorization Required"
 msgid "Auto Refresh"
 msgstr "Auto Refresh"
 
+msgid "Automatic Homenet (HNCP)"
+msgstr ""
+
 msgid "Available"
 msgstr "Available"
 
@@ -333,6 +350,9 @@ msgstr "Backup file list"
 msgid "Bad address specified!"
 msgstr "Bad address specified!"
 
+msgid "Band"
+msgstr ""
+
 msgid ""
 "Below is the determined list of files to backup. It consists of changed "
 "configuration files marked by opkg, essential base files and the user "
@@ -518,6 +538,9 @@ msgstr "Cron Log Level"
 msgid "Custom Interface"
 msgstr "Custom Interface"
 
+msgid "Custom delegated IPv6-prefix"
+msgstr ""
+
 msgid ""
 "Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
 "\">LED</abbr>s if possible."
@@ -543,12 +566,27 @@ msgstr "DHCP-Options"
 msgid "DHCPv6 Leases"
 msgstr ""
 
+msgid "DHCPv6 client"
+msgstr ""
+
+msgid "DHCPv6-Mode"
+msgstr ""
+
+msgid "DHCPv6-Service"
+msgstr ""
+
 msgid "DNS"
 msgstr "DNS"
 
 msgid "DNS forwardings"
 msgstr "DNS forwardings"
 
+msgid "DNS-Label / FQDN"
+msgstr ""
+
+msgid "DS-Lite AFTR address"
+msgstr ""
+
 msgid "DUID"
 msgstr ""
 
@@ -690,6 +728,9 @@ msgstr ""
 "Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
 "and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
 
+msgid "Dual-Stack Lite (RFC6333)"
+msgstr ""
+
 msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
 msgstr ""
 "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
@@ -925,22 +966,25 @@ msgstr ""
 msgid "Given password confirmation did not match, password not changed!"
 msgstr ""
 
+msgid "Global network options"
+msgstr ""
+
 msgid "Go to password configuration..."
 msgstr ""
 
 msgid "Go to relevant configuration page"
 msgstr "Go to relevant configuration page"
 
-msgid "HE.net password"
+msgid "Guest mode"
 msgstr ""
 
-msgid "HE.net user ID"
+msgid "HE.net password"
 msgstr ""
 
-msgid "HT capabilities"
+msgid "HE.net user ID"
 msgstr ""
 
-msgid "HT mode"
+msgid "HT mode (802.11n)"
 msgstr ""
 
 msgid "Handler"
@@ -1003,6 +1047,9 @@ msgstr ""
 msgid "IPv4 and IPv6"
 msgstr ""
 
+msgid "IPv4 assignment length"
+msgstr ""
+
 msgid "IPv4 broadcast"
 msgstr ""
 
@@ -1027,12 +1074,24 @@ msgstr "IPv6"
 msgid "IPv6 Firewall"
 msgstr ""
 
+msgid "IPv6 Settings"
+msgstr ""
+
+msgid "IPv6 ULA-Prefix"
+msgstr ""
+
 msgid "IPv6 WAN Status"
 msgstr ""
 
 msgid "IPv6 address"
 msgstr ""
 
+msgid "IPv6 assignment hint"
+msgstr ""
+
+msgid "IPv6 assignment length"
+msgstr ""
+
 msgid "IPv6 gateway"
 msgstr ""
 
@@ -1045,6 +1104,9 @@ msgstr ""
 msgid "IPv6 prefix length"
 msgstr ""
 
+msgid "IPv6 routed prefix"
+msgstr ""
+
 msgid "IPv6-Address"
 msgstr ""
 
@@ -1121,6 +1183,9 @@ msgstr "Initscripts"
 msgid "Install"
 msgstr "Install"
 
+msgid "Install iputils-traceroute6 for IPv6 traceroute"
+msgstr ""
+
 msgid "Install package %q"
 msgstr ""
 
@@ -1257,6 +1322,15 @@ msgstr ""
 msgid "Limit"
 msgstr "Limit"
 
+msgid "Line Attenuation"
+msgstr ""
+
+msgid "Line Speed"
+msgstr ""
+
+msgid "Line State"
+msgstr ""
+
 msgid "Link On"
 msgstr "Link On"
 
@@ -1407,6 +1481,9 @@ msgstr ""
 msgid "Mode"
 msgstr "Mode"
 
+msgid "Model"
+msgstr ""
+
 msgid "Modem device"
 msgstr "Modem device"
 
@@ -1462,6 +1539,9 @@ msgstr ""
 msgid "NAS ID"
 msgstr "NAS ID"
 
+msgid "NDP-Proxy"
+msgstr ""
+
 msgid "NTP server candidates"
 msgstr ""
 
@@ -1531,6 +1611,9 @@ msgstr ""
 msgid "Noise"
 msgstr "Noise"
 
+msgid "Noise Margin"
+msgstr ""
+
 msgid "Noise:"
 msgstr ""
 
@@ -1790,6 +1873,9 @@ msgstr ""
 msgid "Pseudo Ad-Hoc (ahdemo)"
 msgstr "Pseudo Ad-Hoc (ahdemo)"
 
+msgid "Public prefix routed to this device for distribution to clients."
+msgstr ""
+
 msgid "Quality"
 msgstr ""
 
@@ -1928,6 +2014,12 @@ msgstr "Replace entry"
 msgid "Replace wireless configuration"
 msgstr ""
 
+msgid "Request IPv6-address"
+msgstr ""
+
+msgid "Request IPv6-prefix of length"
+msgstr ""
+
 msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
 msgstr ""
 
@@ -1967,10 +2059,7 @@ msgstr ""
 msgid "Root directory for files served via TFTP"
 msgstr ""
 
-msgid "Router Model"
-msgstr ""
-
-msgid "Router Name"
+msgid "Router Advertisement-Service"
 msgstr ""
 
 msgid "Router Password"
@@ -2033,9 +2122,6 @@ msgid ""
 "conjunction with failure threshold"
 msgstr ""
 
-msgid "Send router solicitations"
-msgstr ""
-
 msgid "Separate Clients"
 msgstr "Separate Clients"
 
@@ -2114,12 +2200,6 @@ msgstr ""
 msgid "Source"
 msgstr "Source"
 
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
 msgid "Specifies the button state to handle"
 msgstr "Specifies the button state to handle"
 
@@ -2187,6 +2267,9 @@ msgstr "Strict order"
 msgid "Submit"
 msgstr "Submit"
 
+msgid "Swap"
+msgstr ""
+
 msgid "Swap Entry"
 msgstr ""
 
@@ -2399,6 +2482,10 @@ msgstr ""
 "This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
 "abbr> in the local network"
 
+msgid ""
+"This is the prefix routed to you by the tunnel broker for use by clients"
+msgstr ""
+
 msgid "This is the system crontab in which scheduled tasks can be defined."
 msgstr "This is the system crontab in which scheduled tasks can be defined."
 
@@ -2472,6 +2559,9 @@ msgstr ""
 msgid "Tunnel Interface"
 msgstr ""
 
+msgid "Tunnel Link"
+msgstr ""
+
 msgid "Turbo Mode"
 msgstr "Turbo Mode"
 
@@ -2556,6 +2646,9 @@ msgstr ""
 msgid "Use broadcast flag"
 msgstr ""
 
+msgid "Use builtin IPv6-management"
+msgstr ""
+
 msgid "Use custom DNS servers"
 msgstr ""
 
@@ -2565,9 +2658,6 @@ msgstr ""
 msgid "Use gateway metric"
 msgstr ""
 
-msgid "Use preferred lifetime"
-msgstr ""
-
 msgid "Use routing table"
 msgstr ""
 
@@ -2578,9 +2668,6 @@ msgid ""
 "requesting host."
 msgstr ""
 
-msgid "Use valid lifetime"
-msgstr ""
-
 msgid "Used"
 msgstr "Used"
 
@@ -2712,6 +2799,9 @@ msgstr ""
 msgid "auto"
 msgstr "auto"
 
+msgid "automatic"
+msgstr "automatic"
+
 msgid "baseT"
 msgstr ""
 
@@ -2733,6 +2823,9 @@ msgstr ""
 msgid "disable"
 msgstr "disable"
 
+msgid "disabled"
+msgstr ""
+
 msgid "expired"
 msgstr ""
 
@@ -2758,6 +2851,9 @@ msgstr "help"
 msgid "hidden"
 msgstr ""
 
+msgid "hybrid mode"
+msgstr ""
+
 msgid "if target is a network"
 msgstr "if target is a network"
 
@@ -2794,9 +2890,24 @@ msgstr ""
 msgid "open"
 msgstr ""
 
+msgid "relay mode"
+msgstr ""
+
 msgid "routed"
 msgstr ""
 
+msgid "server mode"
+msgstr ""
+
+msgid "stateful-only"
+msgstr ""
+
+msgid "stateless"
+msgstr ""
+
+msgid "stateless + stateful"
+msgstr ""
+
 msgid "tagged"
 msgstr ""
 
@@ -2821,6 +2932,24 @@ msgstr ""
 msgid "« Back"
 msgstr "« Back"
 
+#~ msgid "40MHz 2nd channel above"
+#~ msgstr "40MHz 2nd channel above"
+
+#~ msgid "40MHz 2nd channel below"
+#~ msgstr "40MHz 2nd channel below"
+
+#~ msgid "Accept router advertisements"
+#~ msgstr "Accept router advertisements"
+
+#~ msgid "Advertise IPv6 on network"
+#~ msgstr "Advertise IPv6 on network"
+
+#~ msgid "Advertised network ID"
+#~ msgstr "Advertised network ID"
+
+#~ msgid "Allowed range is 1 to 65535"
+#~ msgstr "Allowed range is 1 to 65535"
+
 #~ msgid "Active Leases"
 #~ msgstr "Active Leases"
 
@@ -3587,9 +3716,6 @@ msgstr "« Back"
 #~ msgid "adds domain names to hostentries in the resolv file"
 #~ msgstr "adds domain names to hostentries in the resolv file"
 
-#~ msgid "automatic"
-#~ msgstr "automatic"
-
 #~ msgid "automatically reconnect"
 #~ msgstr "automatically reconnect"
 
diff --git a/po/en/ddns.po b/po/en/ddns.po
index 13d9560ea5..66f199ff81 100644
--- a/po/en/ddns.po
+++ b/po/en/ddns.po
@@ -34,9 +34,6 @@ msgstr ""
 msgid "Enable"
 msgstr "Enable"
 
-msgid "Event interface"
-msgstr "Event interface"
-
 msgid "Force update every"
 msgstr "Force update every"
 
@@ -52,9 +49,6 @@ msgstr "Interface"
 msgid "Network"
 msgstr "Network"
 
-msgid "On which interface up should start the ddns script process."
-msgstr "On which interface up should start the ddns script process."
-
 msgid "Password"
 msgstr "Password"
 
@@ -86,3 +80,9 @@ msgstr "min"
 
 msgid "network"
 msgstr "network"
+
+#~ msgid "Event interface"
+#~ msgstr "Event interface"
+
+#~ msgid "On which interface up should start the ddns script process."
+#~ msgstr "On which interface up should start the ddns script process."
diff --git a/po/en/firewall.po b/po/en/firewall.po
index ecdbb080ec..9f3f262945 100644
--- a/po/en/firewall.po
+++ b/po/en/firewall.po
@@ -470,6 +470,9 @@ msgstr "drop"
 msgid "reject"
 msgstr "reject"
 
+msgid "traffic"
+msgstr ""
+
 #~ msgid "Destination"
 #~ msgstr "Destination"
 
diff --git a/po/en/freifunk.po b/po/en/freifunk.po
index 6532da15b0..1a0b425e90 100644
--- a/po/en/freifunk.po
+++ b/po/en/freifunk.po
@@ -87,6 +87,9 @@ msgstr ""
 msgid "Enable IPv6"
 msgstr ""
 
+msgid "Enable a virtual access point (VAP) by default if possible."
+msgstr ""
+
 msgid "Error"
 msgstr ""
 
@@ -331,6 +334,9 @@ msgstr "Update available!"
 msgid "Uptime"
 msgstr ""
 
+msgid "VAP"
+msgstr ""
+
 msgid "Verify downloaded images"
 msgstr "Verify downloaded images"
 
diff --git a/po/en/olsr.po b/po/en/olsr.po
index b634214020..3364b0e439 100644
--- a/po/en/olsr.po
+++ b/po/en/olsr.po
@@ -37,16 +37,27 @@ msgstr ""
 msgid "Announced network"
 msgstr "Announced network"
 
+msgid "Bad (ETX > 10)"
+msgstr ""
+
+msgid "Bad (SNR < 5)"
+msgstr ""
+
 msgid "Both values must use the dotted decimal notation."
 msgstr ""
 
 msgid "Broadcast address"
 msgstr ""
 
+msgid "Can only be a valid IPv4 or IPv6 address or 'default'"
+msgstr ""
+
 msgid "Configuration"
 msgstr ""
 
-msgid "Device"
+msgid ""
+"Could not get any data. Make sure the jsoninfo plugin is installed and "
+"allows connections from localhost."
 msgstr ""
 
 msgid "Display"
@@ -102,6 +113,15 @@ msgstr ""
 msgid "General settings"
 msgstr "General settings"
 
+msgid "Good (2 < ETX < 4)"
+msgstr ""
+
+msgid "Good (30 > SNR > 20)"
+msgstr ""
+
+msgid "Green"
+msgstr ""
+
 msgid "HNA"
 msgstr ""
 
@@ -123,6 +143,12 @@ msgstr "Hello interval"
 msgid "Hello validity time"
 msgstr "Hello validity time"
 
+msgid "Hide IPv4"
+msgstr ""
+
+msgid "Hide IPv6"
+msgstr ""
+
 msgid "Hna4"
 msgstr ""
 
@@ -236,6 +262,14 @@ msgid ""
 "Default is \"2.5\"."
 msgstr ""
 
+msgid "Invalid Value for LQMult-Value. Must be between 0.01 and 1.0."
+msgstr ""
+
+msgid ""
+"Invalid Value for LQMult-Value. You must use a decimal number between 0.01 "
+"and 1.0 here."
+msgstr ""
+
 msgid "Known OLSR routes"
 msgstr "Known OLSR routes"
 
@@ -254,6 +288,11 @@ msgstr "LQ fisheye"
 msgid "LQ level"
 msgstr "LQ level"
 
+msgid ""
+"LQMult requires two values (IP address or 'default' and multiplicator) "
+"seperated by space."
+msgstr ""
+
 msgid "Last hop"
 msgstr "Last hop"
 
@@ -315,11 +354,9 @@ msgid "Main IP"
 msgstr ""
 
 msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
+"Make sure that OLSRd is running, the \"jsoninfo\" plugin is loaded, "
+"configured on port 9090 and accepts connections from \"127.0.0.1\"."
 msgstr ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
 
 msgid "Metric"
 msgstr ""
@@ -329,7 +366,7 @@ msgstr ""
 
 msgid ""
 "Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
+"and 1.0. It is only used when LQ-Level is greater than 0. Examples:<br /"
 ">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
 "nodes on this interface by 20%: default 0.8"
 msgstr ""
@@ -391,6 +428,9 @@ msgstr "OLSR gateway"
 msgid "OLSR node"
 msgstr "OLSR node"
 
+msgid "Orange"
+msgstr ""
+
 msgid "Overview"
 msgstr ""
 
@@ -433,6 +473,9 @@ msgstr ""
 msgid "Prefix"
 msgstr "Prefix"
 
+msgid "Red"
+msgstr ""
+
 msgid "Resolve"
 msgstr ""
 
@@ -454,6 +497,15 @@ msgid ""
 "IP of the first interface."
 msgstr ""
 
+msgid "Show IPv4"
+msgstr ""
+
+msgid "Show IPv6"
+msgstr ""
+
+msgid "Signal Noise Ratio in dB"
+msgstr ""
+
 msgid "SmartGW"
 msgstr ""
 
@@ -480,6 +532,12 @@ msgstr ""
 msgid "Status"
 msgstr ""
 
+msgid "Still usable (20 > SNR > 5)"
+msgstr ""
+
+msgid "Still usable (4 < ETX < 10)"
+msgstr ""
+
 msgid "Success rate of packages received from the neighbour"
 msgstr ""
 
@@ -533,8 +591,8 @@ msgid "Topology"
 msgstr ""
 
 msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
+"Type of service value for the IP header of control traffic. Default is "
+"\"16\"."
 msgstr ""
 
 msgid "Unable to connect to the OLSR daemon!"
@@ -549,9 +607,18 @@ msgstr ""
 msgid "Use hysteresis"
 msgstr "Use hysteresis"
 
+msgid "Validity Time"
+msgstr ""
+
 msgid "Version"
 msgstr ""
 
+msgid "Very good (ETX < 2)"
+msgstr ""
+
+msgid "Very good (SNR > 30)"
+msgstr ""
+
 msgid "WLAN"
 msgstr ""
 
@@ -581,3 +648,19 @@ msgstr ""
 
 msgid "Willingness"
 msgstr "Willingness"
+
+msgid "Yellow"
+msgstr ""
+
+msgid "no"
+msgstr ""
+
+msgid "yes"
+msgstr ""
+
+#~ msgid ""
+#~ "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
+#~ "configured on port 2006 and accepts connections from \"127.0.0.1\"."
+#~ msgstr ""
+#~ "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
+#~ "configured on port 2006 and accepts connections from \"127.0.0.1\"."
diff --git a/po/en/p910nd.po b/po/en/p910nd.po
index 797b14d7dc..766673ac73 100644
--- a/po/en/p910nd.po
+++ b/po/en/p910nd.po
@@ -26,12 +26,18 @@ msgstr ""
 "First you have to install the packages to get support for USB (kmod-usb-"
 "printer) or parallel port (kmod-lp)."
 
+msgid "Interface"
+msgstr ""
+
 msgid "Port"
 msgstr ""
 
 msgid "Settings"
 msgstr ""
 
+msgid "Specifies the interface to listen on."
+msgstr ""
+
 msgid "TCP listener port."
 msgstr ""
 
diff --git a/po/en/pbx.po b/po/en/pbx.po
index b467a4d214..8b995e1a39 100644
--- a/po/en/pbx.po
+++ b/po/en/pbx.po
@@ -28,6 +28,12 @@ msgstr "Blacklisted Numbers"
 msgid "Call Routing"
 msgstr "Call Routing"
 
+msgid "Call-back Numbers"
+msgstr ""
+
+msgid "Call-back Provider"
+msgstr ""
+
 msgid "Call-through Numbers"
 msgstr "Call-through Numbers"
 
@@ -36,7 +42,13 @@ msgstr "Copy-paste large lists of numbers here."
 
 msgid ""
 "Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
+"user's privileges they will have."
+msgstr ""
+
+msgid ""
+"Designate numbers to whom the system will hang up and call back, which "
+"provider will be used to call them, and which user's privileges will be "
+"granted to them."
 msgstr ""
 
 msgid "Dials numbers unmatched elsewhere"
@@ -67,6 +79,13 @@ msgid "Enabled"
 msgstr "Enabled"
 
 msgid ""
+"Enter a VoIP provider to use for call-back in the format username@some.host."
+"name, as listed in \"Outgoing Calls\" above. It's easiest to copy and paste "
+"the providers from above. Invalid entries, including providers not enabled "
+"for outgoing calls, will be rejected silently."
+msgstr ""
+
+msgid ""
 "Enter phone numbers that you want to decline calls from automatically. You "
 "should probably omit the country code and any leading zeroes, but please "
 "experiment to make sure you are blocking numbers from your desired area "
@@ -127,6 +146,9 @@ msgstr ""
 msgid "Google Voice/Talk Accounts"
 msgstr "Google Voice/Talk Accounts"
 
+msgid "Hang-up Delay"
+msgstr ""
+
 msgid ""
 "Here you must configure at least one SIP account, that you will use to "
 "register with this service. Use this account either in an Analog Telephony "
@@ -137,6 +159,13 @@ msgid ""
 msgstr ""
 
 msgid ""
+"How long to wait before hanging up. If the provider you use to dial "
+"automatically forwards to voicemail, you can set this value to a delay that "
+"will allow you to hang up before your call gets forwarded and you get billed "
+"for it."
+msgstr ""
+
+msgid ""
 "If setting Server/Registrar to %s or %s does not work for you, try setting "
 "it to %s or %s and entering this port number in a separate field that "
 "specifies the Server/Registrar port number. Beware that some devices have a "
@@ -228,10 +257,9 @@ msgstr "Password"
 msgid ""
 "Pick a random port number between 6500 and 9500 for the service to listen "
 "on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
+"force attacks. When finished, (1) click \"Save and Apply\", and (2) look in "
+"the \"SIP Device/Softphone Accounts\" section for updated Server and Port "
+"settings for your SIP Devices/Softphones."
 msgstr ""
 
 msgid "Port Setting for SIP Devices"
@@ -306,6 +334,12 @@ msgid "Specify numbers individually here. Press enter to add more numbers."
 msgstr "Specify numbers individually here. Press enter to add more numbers."
 
 msgid ""
+"Specify numbers individually here. Press enter to add more numbers. You will "
+"have to experiment with what country and area codes you need to add to the "
+"number."
+msgstr ""
+
+msgid ""
 "The number(s) specified above will be able to dial out with this user's "
 "providers. Invalid usernames, including users not enabled for outgoing "
 "calls, are dropped silently. Please verify that the entry was accepted."
@@ -419,9 +453,10 @@ msgstr "Yes"
 
 msgid ""
 "You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
+"here. The best thing to input is a static IP address. If your IP address is "
+"dynamic and it changes, your configuration will become invalid. Hence, it's "
+"recommended to set up Dynamic DNS in this case. and enter your Dynamic DNS "
+"hostname here. You can configure Dynamic DNS with the luci-app-ddns package."
 msgstr ""
 
 msgid "You can specify a real name to show up in the Caller ID here."
diff --git a/po/en/qos.po b/po/en/qos.po
index ce26fd5ddf..aeb7b27b29 100644
--- a/po/en/qos.po
+++ b/po/en/qos.po
@@ -20,12 +20,12 @@ msgstr "Classification Rules"
 msgid "Classification group"
 msgstr "Classification group"
 
+msgid "Comment"
+msgstr ""
+
 msgid "Destination host"
 msgstr "Destination host"
 
-msgid "Downlink"
-msgstr ""
-
 msgid "Download speed (kbit/s)"
 msgstr "Download speed (kbit/s)"
 
@@ -38,9 +38,6 @@ msgstr "Half-duplex"
 msgid "Interfaces"
 msgstr "Interfaces"
 
-msgid "Internet Connection"
-msgstr ""
-
 msgid "Number of bytes"
 msgstr "Number of bytes"
 
@@ -65,9 +62,6 @@ msgstr "Source host"
 msgid "Target"
 msgstr "Target"
 
-msgid "Uplink"
-msgstr ""
-
 msgid "Upload speed (kbit/s)"
 msgstr "Upload speed (kbit/s)"
 
@@ -81,9 +75,6 @@ msgstr ""
 msgid "all"
 msgstr "all"
 
-msgid "allf"
-msgstr ""
-
 msgid "default"
 msgstr "default"
 
@@ -98,6 +89,3 @@ msgstr "normal"
 
 msgid "priority"
 msgstr "priority"
-
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/en/splash.po b/po/en/splash.po
index 07c6712179..615be16b23 100644
--- a/po/en/splash.po
+++ b/po/en/splash.po
@@ -108,11 +108,6 @@ msgstr ""
 msgid "Hostname"
 msgstr ""
 
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
 msgid "IP Address"
 msgstr ""
 
diff --git a/po/en/upnp.po b/po/en/upnp.po
index 0afabe26a1..72d21bae51 100644
--- a/po/en/upnp.po
+++ b/po/en/upnp.po
@@ -123,13 +123,6 @@ msgid "UPNP"
 msgstr ""
 
 msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-
-msgid ""
 "UPnP allows clients in the local network to automatically configure the "
 "router."
 msgstr ""
@@ -146,8 +139,12 @@ msgstr "Uplink"
 msgid "Value in KByte/s, informational only"
 msgstr ""
 
-msgid "enable"
-msgstr ""
+#~ msgid ""
+#~ "UPNP allows clients in the local network to automatically configure the "
+#~ "router."
+#~ msgstr ""
+#~ "UPNP allows clients in the local network to automatically configure the "
+#~ "router."
 
 #~ msgid "Log output"
 #~ msgstr "Log output"