luci/po: spelling and grammar fixes by Alex Henrie

8 files changed, 73 insertions, 32 deletions

diff --git a/po/en/ahcp.po b/po/en/ahcp.po
index d5d58959e..4ad2ab278 100644
--- a/po/en/ahcp.po
+++ b/po/en/ahcp.po
@@ -14,9 +14,10 @@ msgstr ""
 msgid "AHCP Server"
 msgstr "AHCP Server"
 
+#, fuzzy
 msgid ""
 "AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
+"networks designed to be used in place of router discovery or DHCP on "
 "networks where it is difficult or impossible to configure a server within "
 "every link-layer broadcast domain, for example mobile ad-hoc networks."
 msgstr ""
diff --git a/po/en/base.po b/po/en/base.po
index 2f44f8ec7..f2708181b 100644
--- a/po/en/base.po
+++ b/po/en/base.po
@@ -828,7 +828,7 @@ msgid "Expires"
 msgstr ""
 
 msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
+"Expiry time of leased addresses, minimum is 2 minutes (<code>2m</code>)."
 msgstr ""
 
 msgid "External"
@@ -1243,9 +1243,10 @@ msgstr ""
 msgid "Invalid username and/or password! Please try again."
 msgstr "Invalid username and/or password! Please try again."
 
+#, fuzzy
 msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
+"It appears that you are trying to flash an image that does not fit into the "
+"flash memory, please verify the image file!"
 msgstr ""
 "It appears that you try to flash an image that does not fit into the flash "
 "memory, please verify the image file!"
@@ -1382,8 +1383,8 @@ msgid "Local domain"
 msgstr ""
 
 msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
+"Local domain specification. Names matching this domain are never forwarded "
+"and are resolved from DHCP or hosts files only"
 msgstr ""
 
 msgid "Local domain suffix appended to DHCP names and hosts file entries"
@@ -1936,13 +1937,13 @@ msgid "Really reset all changes?"
 msgstr ""
 
 msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
+"Really shut down network?\\nYou might lose access to this device if you are "
+"connected via this interface."
 msgstr ""
 
 msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
+"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
+"you are connected via this interface."
 msgstr ""
 
 msgid "Really switch protocol?"
@@ -2146,10 +2147,10 @@ msgstr ""
 msgid "Services"
 msgstr "Services"
 
-msgid "Setup DHCP Server"
+msgid "Set up Time Synchronization"
 msgstr ""
 
-msgid "Setup Time Synchronization"
+msgid "Setup DHCP Server"
 msgstr ""
 
 msgid "Show current backup file list"
@@ -2195,7 +2196,7 @@ msgid "Sorry, the server encountered an unexpected error."
 msgstr ""
 
 msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
+"Sorry, there is no sysupgrade support present; a new firmware image must be "
 "flashed manually. Please refer to the OpenWrt wiki for device specific "
 "install instructions."
 msgstr ""
@@ -2335,10 +2336,10 @@ msgstr "Terminate"
 
 msgid ""
 "The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
+"radio hardware such as channel, transmit power or antenna selection which "
+"are shared among all defined wireless networks (if the radio hardware is "
+"multi-SSID capable). Per network settings like encryption or operation mode "
+"are grouped in the <em>Interface Configuration</em>."
 msgstr ""
 
 msgid ""
@@ -2395,8 +2396,8 @@ msgid "The given network name is not unique"
 msgstr ""
 
 msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
+"The hardware is not multi-SSID capable and the existing configuration will "
+"be replaced if you proceed."
 msgstr ""
 
 msgid ""
@@ -2424,9 +2425,10 @@ msgid ""
 "when finished."
 msgstr ""
 
+#, fuzzy
 msgid ""
 "The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
+"few minutes before you try to reconnect. It might be necessary to renew the "
 "address of your computer to reach the device again, depending on your "
 "settings."
 msgstr ""
diff --git a/po/en/firewall.po b/po/en/firewall.po
index 9f3f26294..2684067e2 100644
--- a/po/en/firewall.po
+++ b/po/en/firewall.po
@@ -396,7 +396,7 @@ msgid ""
 "<em>output</em> options set the default policies for traffic entering and "
 "leaving this zone while the <em>forward</em> option describes the policy for "
 "forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
+"networks</em> specifies which available networks are members of this zone."
 msgstr ""
 
 msgid "To %s at %s on <var>this device</var>"
diff --git a/po/en/meshwizard.po b/po/en/meshwizard.po
index 180d771c8..a67c71f5c 100644
--- a/po/en/meshwizard.po
+++ b/po/en/meshwizard.po
@@ -51,8 +51,8 @@ msgid "Mesh Wizard"
 msgstr ""
 
 msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
+"Note: this will set up this interface for mesh operation, i.e. add it to "
+"zone 'freifunk' and enable olsr."
 msgstr ""
 
 msgid "Protect LAN"
diff --git a/po/en/olsr.po b/po/en/olsr.po
index 563fbddc5..131005e1e 100644
--- a/po/en/olsr.po
+++ b/po/en/olsr.po
@@ -52,6 +52,9 @@ msgstr ""
 msgid "Can only be a valid IPv4 or IPv6 address or 'default'"
 msgstr ""
 
+msgid "Can only be a valid IPv6 address or 'default'"
+msgstr ""
+
 msgid "Configuration"
 msgstr ""
 
@@ -134,6 +137,10 @@ msgstr "HNA interval"
 msgid "HNA validity time"
 msgstr "HNA validity time"
 
+#, fuzzy
+msgid "HNA6 Announcements"
+msgstr "OLSR - HNA-Announcements"
+
 msgid "Hello"
 msgstr ""
 
@@ -167,6 +174,11 @@ msgid ""
 msgstr ""
 
 msgid ""
+"Hosts in a OLSR routed network can announce connecitivity to external "
+"networks using HNA6 messages."
+msgstr ""
+
+msgid ""
 "Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
 "robustness to the link sensing but delays neighbor registration. Defaults is "
 "\"yes\""
@@ -371,6 +383,13 @@ msgid ""
 "nodes on this interface by 20%: default 0.8"
 msgstr ""
 
+msgid ""
+"Multiply routes with the factor given here. Allowed values are between 0.01 "
+"and 1.0. It is only used when LQ-Level is greater than 0. Examples:<br /"
+">reduce LQ to fd91:662e:3c58::1 by half: fd91:662e:3c58::1 0.5<br />reduce "
+"LQ to all nodes on this interface by 20%: default 0.8"
+msgstr ""
+
 msgid "NAT threshold"
 msgstr ""
 
@@ -410,6 +429,10 @@ msgstr ""
 msgid "OLSR - HNA-Announcements"
 msgstr "OLSR - HNA-Announcements"
 
+#, fuzzy
+msgid "OLSR - HNA6-Announcements"
+msgstr "OLSR - HNA-Announcements"
+
 msgid "OLSR - Plugins"
 msgstr "OLSR - Plugins"
 
@@ -497,6 +520,12 @@ msgid ""
 "IP of the first interface."
 msgstr ""
 
+msgid ""
+"Sets the main IP (originator ip) of the router. This IP will NEVER change "
+"during the uptime of olsrd. Default is ::, which triggers usage of the IP of "
+"the first interface."
+msgstr ""
+
 msgid "Show IPv4"
 msgstr ""
 
@@ -646,6 +675,12 @@ msgid ""
 "Default setting is \"both\"."
 msgstr ""
 
+msgid ""
+"Which kind of uplink is exported to the other mesh nodes. An uplink is "
+"detected by looking for a local HNA6 ::ffff:0:0/96 or 2000::/3. Default "
+"setting is \"both\"."
+msgstr ""
+
 msgid "Willingness"
 msgstr "Willingness"
 
@@ -662,5 +697,5 @@ msgstr ""
 #~ "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
 #~ "configured on port 2006 and accepts connections from \"127.0.0.1\"."
 #~ msgstr ""
-#~ "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, configured "
-#~ "on port 2006 and accepts connections from \"127.0.0.1\"."
+#~ "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
+#~ "configured on port 2006 and accepts connections from \"127.0.0.1\"."
diff --git a/po/en/watchcat.po b/po/en/watchcat.po
index 18d19be2a..0f9099c5a 100644
--- a/po/en/watchcat.po
+++ b/po/en/watchcat.po
@@ -47,16 +47,18 @@ msgstr "Ping period"
 msgid "Watchcat"
 msgstr "Watchcat"
 
+#, fuzzy
 msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
+"Watchcat allows configuring a periodic reboot when the Internet connection "
+"has been lost for a certain period of time."
 msgstr ""
 "Watchcat allows to configure a periodic reboot and/or when internet "
 "connection has been lost for a certain period of time."
 
+#, fuzzy
 msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
+"When rebooting the system, the watchcat will trigger a soft reboot. Entering "
+"a non zero value here will trigger a delayed hard reboot if the soft reboot "
 "fails. Enter a number of seconds to enable, use 0 to disable"
 msgstr ""
 "When rebooting the system the watchcat will trigger a soft reboot, Entering "
diff --git a/po/en/wol.po b/po/en/wol.po
index 0df5a643c..48c7302a3 100644
--- a/po/en/wol.po
+++ b/po/en/wol.po
@@ -23,8 +23,9 @@ msgstr "Host to wake up"
 msgid "Network interface to use"
 msgstr "Network interface to use"
 
+#, fuzzy
 msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
+"Sometimes only one of the two tools works. If one fails, try the other one"
 msgstr ""
 "Sometimes only one of both tools work. If one of fails, try the other one"
 
diff --git a/po/en/wshaper.po b/po/en/wshaper.po
index 4eee2b627..d646e764c 100644
--- a/po/en/wshaper.po
+++ b/po/en/wshaper.po
@@ -35,6 +35,6 @@ msgid "Wondershaper settings"
 msgstr ""
 
 msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
+"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
+"even when your internet connection is highly saturated."
 msgstr ""