Synchronize translations

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

1 files changed, 224 insertions, 27 deletions

diff --git a/modules/luci-base/po/no/base.po b/modules/luci-base/po/no/base.po
index 8abf60d158..f7429201f0 100644
--- a/modules/luci-base/po/no/base.po
+++ b/modules/luci-base/po/no/base.po
@@ -29,6 +29,12 @@ msgstr "-- Vennligst velg --"
 msgid "-- custom --"
 msgstr "-- egendefinert --"
 
+msgid "-- match by device --"
+msgstr ""
+
+msgid "-- match by label --"
+msgstr ""
+
 msgid "1 Minute Load:"
 msgstr "1 minutts belastning:"
 
@@ -114,6 +120,9 @@ msgstr ""
 msgid "ADSL Status"
 msgstr ""
 
+msgid "AICCU (SIXXS)"
+msgstr ""
+
 msgid "APN"
 msgstr "<abbr title=\"Aksesspunkt Navn\">APN</abbr>"
 
@@ -148,6 +157,9 @@ msgstr ""
 msgid "ATM device number"
 msgstr "<abbr title=\"Asynchronous Transfer Mode\">ATM</abbr> enhetsnummer"
 
+msgid "AYIYA"
+msgstr ""
+
 msgid "Access Concentrator"
 msgstr "Tilgangskonsentrator"
 
@@ -233,15 +245,13 @@ msgid ""
 "Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
 msgstr "Tillat oppstrøms svar i 127.0.0.0/8 nettet, f.eks for RBL tjenester"
 
-msgid "Always announce default router"
+msgid ""
+"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
+"\">Tunneling Comparison</a> on SIXXS"
 msgstr ""
 
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
+msgid "Always announce default router"
 msgstr ""
-"Bruk alltid 40MHz kanaler selv om sekundær kanal overlapper. Dette "
-"alternativet er ikke i samsvar med IEEE 802.11n-2009!"
 
 msgid "An additional network will be created if you leave this unchecked."
 msgstr "Et nytt nettverk vil bli opprettet hvis du tar bort haken."
@@ -290,6 +300,9 @@ msgstr "Tilkoblede Klienter"
 msgid "Atheros 802.11%s Wireless Controller"
 msgstr "Atheros 802.11%s Trådløs Kontroller"
 
+msgid "AuthGroup"
+msgstr ""
+
 msgid "Authentication"
 msgstr "Godkjenning"
 
@@ -353,6 +366,9 @@ msgstr "Ugyldig adresse oppgitt!"
 msgid "Band"
 msgstr ""
 
+msgid "Behind NAT"
+msgstr ""
+
 msgid ""
 "Below is the determined list of files to backup. It consists of changed "
 "configuration files marked by opkg, essential base files and the user "
@@ -392,15 +408,15 @@ msgstr "Bufret"
 msgid "Buttons"
 msgstr "Knapper"
 
+msgid "CA certificate; if empty it will be saved after the first connection."
+msgstr ""
+
 msgid "CPU"
 msgstr "CPU"
 
 msgid "CPU usage (%)"
 msgstr "CPU forbruk (%)"
 
-msgid "Cached"
-msgstr "Hurtigbufret"
-
 msgid "Cancel"
 msgstr "Avbryt"
 
@@ -495,11 +511,6 @@ msgstr "Konfigurasjons endring utført."
 msgid "Configuration files will be kept."
 msgstr "Konfigurasjonsfiler vil bli bevart."
 
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-"Konfigurerer dette monteringspunktet som overlay lagringspunkt for block-"
-"extroot"
-
 msgid "Confirmation"
 msgstr "Bekreftelse"
 
@@ -512,6 +523,9 @@ msgstr "Tilkoblet"
 msgid "Connection Limit"
 msgstr "Tilkoblingsgrense (antall)"
 
+msgid "Connection to server fails when TLS cannot be used"
+msgstr ""
+
 msgid "Connections"
 msgstr "Tilkoblinger"
 
@@ -606,6 +620,9 @@ msgstr "Standard %d"
 msgid "Default gateway"
 msgstr "Standard gateway"
 
+msgid "Default route"
+msgstr ""
+
 msgid "Default state"
 msgstr "Standard tilstand"
 
@@ -797,9 +814,18 @@ msgstr "Aktiver TFTP server"
 msgid "Enable VLAN functionality"
 msgstr "Aktiver VLAN funksjonalitet"
 
+msgid "Enable WPS pushbutton, requires WPA(2)-PSK"
+msgstr ""
+
 msgid "Enable learning and aging"
 msgstr "Aktiver 'læring' og 'aldring'"
 
+msgid "Enable mirroring of incoming packets"
+msgstr ""
+
+msgid "Enable mirroring of outgoing packets"
+msgstr ""
+
 msgid "Enable this mount"
 msgstr "Aktiver dette monteringspunktet"
 
@@ -919,9 +945,6 @@ msgstr "Flasher..."
 msgid "Force"
 msgstr "Bruk"
 
-msgid "Force 40MHz mode"
-msgstr "Bruk 40MHz modus"
-
 msgid "Force CCMP (AES)"
 msgstr "Bruk CCMP (AES)"
 
@@ -956,9 +979,6 @@ msgstr "Ledig"
 msgid "Free space"
 msgstr "Ledig plass"
 
-msgid "Frequency Hopping"
-msgstr "Frekvens Hopping"
-
 msgid "GHz"
 msgstr "GHz"
 
@@ -1004,15 +1024,15 @@ msgstr "HE.net passord"
 msgid "HE.net username"
 msgstr ""
 
-msgid "HT mode (802.11n)"
-msgstr ""
-
 msgid "Handler"
 msgstr "Behandler"
 
 msgid "Hang Up"
 msgstr "Slå av"
 
+msgid "Heartbeat"
+msgstr ""
+
 msgid ""
 "Here you can configure the basic aspects of your device like its hostname or "
 "the timezone."
@@ -1051,6 +1071,9 @@ msgstr "Vertsnavn som sendes ved DHCP forespørsel"
 msgid "Hostnames"
 msgstr "Vertsnavn"
 
+msgid "Hybrid"
+msgstr ""
+
 msgid "IP address"
 msgstr "IP adresse"
 
@@ -1096,6 +1119,9 @@ msgstr "IPv6"
 msgid "IPv6 Firewall"
 msgstr "IPv6 Brannmur"
 
+msgid "IPv6 Neighbours"
+msgstr ""
+
 msgid "IPv6 Settings"
 msgstr ""
 
@@ -1108,6 +1134,9 @@ msgstr "IPv6 WAN Status"
 msgid "IPv6 address"
 msgstr "IPv6 adresse"
 
+msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
+msgstr ""
+
 msgid "IPv6 assignment hint"
 msgstr ""
 
@@ -1243,6 +1272,9 @@ msgstr "Grensesnittet er slått av"
 msgid "Interfaces"
 msgstr "Grensesnitt"
 
+msgid "Internal"
+msgstr ""
+
 msgid "Internal Server Error"
 msgstr "Intern server feil"
 
@@ -1320,6 +1352,9 @@ msgstr "Språk"
 msgid "Language and Style"
 msgstr "Språk og Utseende"
 
+msgid "Leaf"
+msgstr ""
+
 msgid "Lease validity time"
 msgstr "Gyldig leietid"
 
@@ -1424,8 +1459,8 @@ msgstr ""
 msgid "Localise queries"
 msgstr "Lokalisere søk"
 
-msgid "Locked to channel %d used by %s"
-msgstr "Låst til kanal %d brukt av %s"
+msgid "Locked to channel %d used by: %s"
+msgstr ""
 
 msgid "Log output level"
 msgstr "Logg nivå"
@@ -1466,6 +1501,11 @@ msgstr "MHz"
 msgid "MTU"
 msgstr "MTU"
 
+msgid ""
+"Make sure to clone the root filesystem using something like the commands "
+"below:"
+msgstr ""
+
 msgid "Maximum Rate"
 msgstr "Maksimal hastighet"
 
@@ -1505,6 +1545,12 @@ msgstr "Minimum hastighet"
 msgid "Minimum hold time"
 msgstr "Minimum holde tid"
 
+msgid "Mirror monitor port"
+msgstr ""
+
+msgid "Mirror source port"
+msgstr ""
+
 msgid "Missing protocol extension for proto %q"
 msgstr "Mangler protokoll utvidelse for proto %q"
 
@@ -1575,6 +1621,9 @@ msgstr ""
 msgid "NTP server candidates"
 msgstr "NTP server kandidater"
 
+msgid "NTP sync time-out"
+msgstr ""
+
 msgid "Name"
 msgstr "Navn"
 
@@ -1710,12 +1759,24 @@ msgstr "Ett eller flere obligatoriske felter har ingen verdi!"
 msgid "Open list..."
 msgstr "Åpne liste..."
 
+msgid "OpenConnect (CISCO AnyConnect)"
+msgstr ""
+
+msgid "Operating frequency"
+msgstr ""
+
 msgid "Option changed"
 msgstr "Innstilling endret"
 
 msgid "Option removed"
 msgstr "Innstilling fjernet"
 
+msgid "Optional, specify to override default server (tic.sixxs.net)"
+msgstr ""
+
+msgid "Optional, use when the SIXXS account has more than one tunnel"
+msgstr ""
+
 msgid "Options"
 msgstr "Alternativer"
 
@@ -1731,6 +1792,9 @@ msgstr "Ugående:"
 msgid "Outdoor Channels"
 msgstr "Utendørs Kanaler"
 
+msgid "Output Interface"
+msgstr ""
+
 msgid "Override MAC address"
 msgstr "Overstyr MAC adresse"
 
@@ -1810,6 +1874,9 @@ msgstr "Passord for privatnøkkel"
 msgid "Password successfully changed!"
 msgstr "Passordet er endret!"
 
+msgid "Path"
+msgstr ""
+
 msgid "Path to CA-Certificate"
 msgstr "Sti til CA-sertifikat"
 
@@ -2066,6 +2133,9 @@ msgstr ""
 msgid "Request IPv6-prefix of length"
 msgstr ""
 
+msgid "Require TLS"
+msgstr ""
+
 msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
 msgstr "Er nødvendig for noen nettleverandører, f.eks Charter med DOCSIS 3"
 
@@ -2105,6 +2175,12 @@ msgstr "Rot"
 msgid "Root directory for files served via TFTP"
 msgstr "Rot katalog for filer gitt fra TFTP"
 
+msgid "Root preparation"
+msgstr ""
+
+msgid "Routed IPv6 prefix for downstream interfaces"
+msgstr ""
+
 msgid "Router Advertisement-Service"
 msgstr ""
 
@@ -2130,6 +2206,14 @@ msgstr "Kjør filsystem sjekk før montering av enheten"
 msgid "Run filesystem check"
 msgstr "Kjør filsystem sjekk"
 
+msgid ""
+"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
+"use 6in4 instead"
+msgstr ""
+
+msgid "SIXXS-handle[/Tunnel-ID]"
+msgstr ""
+
 msgid "SSH Access"
 msgstr "SSH Tilgang"
 
@@ -2179,6 +2263,17 @@ msgstr "Separert WDS"
 msgid "Server Settings"
 msgstr "Server Innstillinger"
 
+msgid "Server password"
+msgstr ""
+
+msgid ""
+"Server password, enter the specific password of the tunnel when the username "
+"contains the tunnel ID"
+msgstr ""
+
+msgid "Server username"
+msgstr ""
+
 msgid "Service Name"
 msgstr "Tjeneste navn"
 
@@ -2253,6 +2348,9 @@ msgstr "Sortering"
 msgid "Source"
 msgstr "Kilde"
 
+msgid "Source routing"
+msgstr ""
+
 msgid "Specifies the button state to handle"
 msgstr "Spesifiserer knappens handlemønster"
 
@@ -2513,6 +2611,11 @@ msgstr ""
 "datamaskinen din for å nå enheten på nytt. (avhengig av innstillingene dine)"
 
 msgid ""
+"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
+"AYIYA"
+msgstr ""
+
+msgid ""
 "The uploaded image file does not contain a supported format. Make sure that "
 "you choose the generic image format for your platform."
 msgstr ""
@@ -2669,6 +2772,15 @@ msgstr "Tunnel grensesnitt"
 msgid "Tunnel Link"
 msgstr ""
 
+msgid "Tunnel broker protocol"
+msgstr ""
+
+msgid "Tunnel setup server"
+msgstr ""
+
+msgid "Tunnel type"
+msgstr ""
+
 msgid "Turbo Mode"
 msgstr "Turbo Modus"
 
@@ -2750,8 +2862,11 @@ msgstr "Bruk MTU på tunnel grensesnitt"
 msgid "Use TTL on tunnel interface"
 msgstr "Bruk TTL på tunnel grensesnitt"
 
-msgid "Use as root filesystem"
-msgstr "Bruk som rot filsystem"
+msgid "Use as external overlay (/overlay)"
+msgstr ""
+
+msgid "Use as root filesystem (/)"
+msgstr ""
 
 msgid "Use broadcast flag"
 msgstr "Bruk kringkasting flagg"
@@ -2788,6 +2903,12 @@ msgstr "Brukt"
 msgid "Used Key Slot"
 msgstr "Brukte Nøkler"
 
+msgid "User certificate (PEM encoded)"
+msgstr ""
+
+msgid "User key (PEM encoded)"
+msgstr ""
+
 msgid "Username"
 msgstr "Brukernavn"
 
@@ -2806,9 +2927,21 @@ msgstr "VLANs på %q (%s)"
 msgid "VPN Server"
 msgstr "VPN server"
 
+msgid "VPN Server port"
+msgstr ""
+
+msgid "VPN Server's certificate SHA1 hash"
+msgstr ""
+
 msgid "Vendor Class to send when requesting DHCP"
 msgstr "Leverandør klasse som sendes ved DHCP spørring"
 
+msgid "Verbose"
+msgstr ""
+
+msgid "Verbose logging by aiccu daemon"
+msgstr ""
+
 msgid "Verify"
 msgstr "Bekreft"
 
@@ -2840,6 +2973,10 @@ msgstr ""
 "WPA-Kryptering krever at wpa_supplicant (for klient-modus) eller hostapd "
 "(for AP og ad-hoc-modus) er installert."
 
+msgid ""
+"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
+msgstr ""
+
 msgid "Waiting for changes to be applied..."
 msgstr "Venter på at endringer utføres..."
 
@@ -2852,6 +2989,15 @@ msgstr "Advarsel"
 msgid "Warning: There are unsaved changes that will be lost while rebooting!"
 msgstr "Advarsel: Det er ulagrede endringer som vil gå tapt under omstarten!"
 
+msgid "Whether to create an IPv6 default route over the tunnel"
+msgstr ""
+
+msgid "Whether to route only packets from delegated prefixes"
+msgstr ""
+
+msgid "Width"
+msgstr ""
+
 msgid "Wifi"
 msgstr "Trådløs"
 
@@ -2910,6 +3056,12 @@ msgstr ""
 "Du må aktivere Java Script i nettleseren din ellers vil ikke LuCI fungere "
 "skikkelig."
 
+msgid ""
+"Your Internet Explorer is too old to display this page correctly. Please "
+"upgrade it to at least version 7 or use another browser like Firefox, Opera "
+"or Safari."
+msgstr ""
+
 msgid "any"
 msgstr "enhver"
 
@@ -2989,6 +3141,12 @@ msgstr "kbit/s"
 msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
 msgstr "lokal <abbr title=\"Domain Navn System\">DNS</abbr>-fil"
 
+msgid "minimum 1280, maximum 1480"
+msgstr ""
+
+msgid "navigation Navigation"
+msgstr ""
+
 msgid "no"
 msgstr "nei"
 
@@ -2998,6 +3156,9 @@ msgstr "ingen forbindelse"
 msgid "none"
 msgstr "ingen"
 
+msgid "not present"
+msgstr ""
+
 msgid "off"
 msgstr "av"
 
@@ -3007,6 +3168,9 @@ msgstr "på"
 msgid "open"
 msgstr "åpen"
 
+msgid "overlay"
+msgstr ""
+
 msgid "relay mode"
 msgstr ""
 
@@ -3016,6 +3180,12 @@ msgstr "rutet"
 msgid "server mode"
 msgstr ""
 
+msgid "skiplink1 Skip to navigation"
+msgstr ""
+
+msgid "skiplink2 Skip to content"
+msgstr ""
+
 msgid "stateful-only"
 msgstr ""
 
@@ -3049,6 +3219,33 @@ msgstr "ja"
 msgid "« Back"
 msgstr "« Tilbake"
 
+#~ msgid ""
+#~ "Always use 40MHz channels even if the secondary channel overlaps. Using "
+#~ "this option does not comply with IEEE 802.11n-2009!"
+#~ msgstr ""
+#~ "Bruk alltid 40MHz kanaler selv om sekundær kanal overlapper. Dette "
+#~ "alternativet er ikke i samsvar med IEEE 802.11n-2009!"
+
+#~ msgid "Cached"
+#~ msgstr "Hurtigbufret"
+
+#~ msgid "Configures this mount as overlay storage for block-extroot"
+#~ msgstr ""
+#~ "Konfigurerer dette monteringspunktet som overlay lagringspunkt for block-"
+#~ "extroot"
+
+#~ msgid "Force 40MHz mode"
+#~ msgstr "Bruk 40MHz modus"
+
+#~ msgid "Frequency Hopping"
+#~ msgstr "Frekvens Hopping"
+
+#~ msgid "Locked to channel %d used by %s"
+#~ msgstr "Låst til kanal %d brukt av %s"
+
+#~ msgid "Use as root filesystem"
+#~ msgstr "Bruk som rot filsystem"
+
 #~ msgid "HE.net user ID"
 #~ msgstr "HE.net bruker ID"