Rework LuCI build system

 * Rename subdirectories to their repective OpenWrt package names
 * Make each LuCI module its own standalone package
 * Deploy a shared luci.mk which is used by each module Makefile

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

1 files changed, 634 insertions, 0 deletions

diff --git a/libs/luci-lib-nixio/axTLS/samples/perl/axssl.pl b/libs/luci-lib-nixio/axTLS/samples/perl/axssl.pl
new file mode 100755
index 000000000..e49d52270
--- /dev/null
+++ b/libs/luci-lib-nixio/axTLS/samples/perl/axssl.pl
@@ -0,0 +1,634 @@
+#!/usr/bin/perl -w
+#
+# Copyright (c) 2007, Cameron Rich
+#
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# * Redistributions of source code must retain the above copyright notice,
+#   this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+#   notice, this list of conditions and the following disclaimer in the
+#   documentation and/or other materials provided with the distribution.
+# * Neither the name of the axTLS project nor the names of its
+#   contributors may be used to endorse or promote products derived
+#   from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY 
+# OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#
+# Demonstrate the use of the axTLS library in Perl with a set of 
+# command-line parameters similar to openssl. In fact, openssl clients 
+# should be able to communicate with axTLS servers and visa-versa.
+#
+# This code has various bits enabled depending on the configuration. To enable
+# the most interesting version, compile with the 'full mode' enabled.
+#
+# To see what options you have, run the following:
+# > [perl] axssl s_server -?
+# > [perl] axssl s_client -?
+#
+# The axtls/axtlsp shared libraries must be in the same directory or be found 
+# by the OS. axtlsp.pm must be in this directory or be in @INC.
+#
+# Under Win32, ActivePerl was used (see
+# http://www.activestate.com/Products/ActivePerl/?mp=1)
+#
+use axtlsp;
+use IO::Socket;
+
+# To get access to Win32 file descriptor stuff
+my $is_win32 = 0;
+
+if ($^O eq "MSWin32")
+{
+    eval("use Win32API::File 0.08 qw( :ALL )");
+    $is_win32 = 1;
+}
+
+use strict;
+
+#
+# Win32 has some problems with socket handles
+#
+sub get_native_sock
+{
+    my ($sock) = @_;
+    return $is_win32 ? FdGetOsFHandle($sock) : $sock;
+}
+
+# print version?
+if ($#ARGV == 0 && $ARGV[0] eq "version")
+{
+    printf("axssl.pl ".axtlsp::ssl_version()."\n");
+    exit 0;
+}
+
+#
+# Main entry point. Doesn't do much except works out whether we are a client
+# or a server.
+#
+print_options($#ARGV > -1 ? $ARGV[0] : "")
+        if ($#ARGV < 0 || ($ARGV[0] ne "s_server" && $ARGV[0] ne "s_client"));
+
+
+# Cygwin/Win32 issue - flush our output continuously
+select STDOUT;
+local $|=1;
+
+my $build_mode = axtlsp::ssl_get_config($axtlsp::SSL_BUILD_MODE);
+$ARGV[0] eq "s_server" ? do_server($build_mode) : do_client($build_mode);
+
+#
+# Implement the SSL server logic. 
+#
+sub do_server
+{
+    my ($build_mode) = @_;
+    my $i = 1;
+    my $port = 4433;
+    my $options = $axtlsp::SSL_DISPLAY_CERTS;
+    my $quiet = 0;
+    my $password = undef;
+    my $private_key_file = undef;
+    my $cert_size = axtlsp::ssl_get_config($axtlsp::SSL_MAX_CERT_CFG_OFFSET);
+    my $ca_cert_size = axtlsp::ssl_get_config(
+                        $axtlsp::SSL_MAX_CA_CERT_CFG_OFFSET);
+    my @cert;
+    my @ca_cert;
+
+    while ($i <= $#ARGV)
+    {
+        if ($ARGV[$i] eq  "-accept")
+        {
+            print_server_options($build_mode, $ARGV[$i]) if $i >= $#ARGV;
+            $port = $ARGV[++$i];
+        }
+        elsif ($ARGV[$i] eq "-quiet")
+        {
+            $quiet = 1;
+            $options &= ~$axtlsp::SSL_DISPLAY_CERTS;
+        }
+        elsif ($build_mode >= $axtlsp::SSL_BUILD_SERVER_ONLY)
+        {
+            if ($ARGV[$i] eq "-cert")
+            {
+                print_server_options($build_mode, $ARGV[$i]) 
+                                    if $i >= $#ARGV || $#cert >= $cert_size-1;
+
+                push @cert,  $ARGV[++$i];
+            }
+            elsif ($ARGV[$i] eq "-key")
+            {
+                print_server_options($build_mode, $ARGV[$i]) if $i >= $#ARGV;
+                $private_key_file = $ARGV[++$i];
+                $options |= $axtlsp::SSL_NO_DEFAULT_KEY;
+            }
+            elsif ($ARGV[$i] eq "-pass")
+            {
+                print_server_options($build_mode, $ARGV[$i]) if $i >= $#ARGV;
+                $password = $ARGV[++$i];
+            }
+            elsif ($build_mode >= $axtlsp::SSL_BUILD_ENABLE_VERIFICATION)
+            {
+                if ($ARGV[$i] eq "-verify")
+                {
+                    $options |= $axtlsp::SSL_CLIENT_AUTHENTICATION;
+                }
+                elsif ($ARGV[$i] eq "-CAfile")
+                {
+                    print_server_options($build_mode, $ARGV[$i])  
+                                if $i >= $#ARGV || $#ca_cert >= $ca_cert_size-1;
+                    push @ca_cert, $ARGV[++$i];
+                }
+                elsif ($build_mode == $axtlsp::SSL_BUILD_FULL_MODE)
+                {
+                    if ($ARGV[$i] eq "-debug")
+                    {
+                        $options |= $axtlsp::SSL_DISPLAY_BYTES;
+                    }
+                    elsif ($ARGV[$i] eq "-state")
+                    {
+                        $options |= $axtlsp::SSL_DISPLAY_STATES;
+                    }
+                    elsif ($ARGV[$i] eq "-show-rsa")
+                    {
+                        $options |= $axtlsp::SSL_DISPLAY_RSA;
+                    }
+                    else
+                    {
+                        print_server_options($build_mode, $ARGV[$i]);
+                    }
+                }
+                else
+                {
+                    print_server_options($build_mode, $ARGV[$i]);
+                }
+            }
+            else 
+            {
+                print_server_options($build_mode, $ARGV[$i]);
+            }
+        }
+        else 
+        {
+            print_server_options($build_mode, $ARGV[$i]);
+        }
+
+        $i++;
+    }
+
+    # Create socket for incoming connections
+    my $server_sock = IO::Socket::INET->new(Proto => 'tcp',
+                              LocalPort => $port,
+                              Listen => 1,
+                              Reuse => 1) or die $!;
+
+    ###########################################################################
+    # This is where the interesting stuff happens. Up until now we've
+    # just been setting up sockets etc. Now we do the SSL handshake.
+    ###########################################################################
+    my $ssl_ctx = axtlsp::ssl_ctx_new($options, $axtlsp::SSL_DEFAULT_SVR_SESS);
+    die "Error: Server context is invalid" if not defined $ssl_ctx;
+
+    if (defined $private_key_file)
+    {
+        my $obj_type = $axtlsp::SSL_OBJ_RSA_KEY;
+
+        $obj_type = $axtlsp::SSL_OBJ_PKCS8 if $private_key_file =~ /.p8$/;
+        $obj_type = $axtlsp::SSL_OBJ_PKCS12 if $private_key_file =~ /.p12$/;
+
+        die "Private key '$private_key_file' is undefined." if 
+                axtlsp::ssl_obj_load($ssl_ctx, $obj_type,
+                        $private_key_file, $password);
+    }
+
+    foreach (@cert)
+    {
+        die "Certificate '$_' is undefined." 
+            if axtlsp::ssl_obj_load($ssl_ctx, $axtlsp::SSL_OBJ_X509_CERT, 
+                    $_, undef) != $axtlsp::SSL_OK;
+    }
+
+    foreach (@ca_cert)
+    {
+        die "Certificate '$_' is undefined." 
+            if axtlsp::ssl_obj_load($ssl_ctx, $axtlsp::SSL_OBJ_X509_CACERT, 
+                    $_, undef) != $axtlsp::SSL_OK;
+    }
+
+    for (;;)
+    {
+        printf("ACCEPT\n") if not $quiet;
+        my $client_sock = $server_sock->accept;
+        my $native_sock = get_native_sock($client_sock->fileno);
+
+        # This doesn't work in Win32 - need to get file descriptor from socket.
+        my $ssl = axtlsp::ssl_server_new($ssl_ctx, $native_sock);
+
+        # do the actual SSL handshake
+        my $res;
+        my $buf;
+        my $connected = 0;
+
+        while (1)
+        {
+            ($res, $buf) = axtlsp::ssl_read($ssl, undef);
+            last if $res < $axtlsp::SSL_OK;
+
+            if ($res == $axtlsp::SSL_OK) # connection established and ok
+            {
+                if (axtlsp::ssl_handshake_status($ssl) == $axtlsp::SSL_OK)
+                {
+                    if (!$quiet && !$connected)
+                    {
+                        display_session_id($ssl);
+                        display_cipher($ssl);
+                    }
+
+                    $connected = 1;
+                }
+            }
+
+            if ($res > $axtlsp::SSL_OK)
+            {
+                printf($$buf);
+            }
+            elsif ($res < $axtlsp::SSL_OK)
+            {
+                axtlsp::ssl_display_error($res) if not $quiet;
+                last;
+            } 
+        }
+
+        # client was disconnected or the handshake failed.
+        printf("CONNECTION CLOSED\n") if not $quiet;
+        axtlsp::ssl_free($ssl);
+        $client_sock->close;
+    }
+
+    axtlsp::ssl_ctx_free($ssl_ctx);
+}
+
+#
+# Implement the SSL client logic.
+#
+sub do_client
+{
+    my ($build_mode) = @_;
+    my $i = 1;
+    my $port = 4433;
+    my $options = $axtlsp::SSL_SERVER_VERIFY_LATER|$axtlsp::SSL_DISPLAY_CERTS;
+    my $private_key_file = undef;
+    my $reconnect = 0;
+    my $quiet = 0;
+    my $password = undef;
+    my @session_id;
+    my $host = "127.0.0.1";
+    my @cert;
+    my @ca_cert;
+    my $cert_size = axtlsp::ssl_get_config(
+            $axtlsp::SSL_MAX_CERT_CFG_OFFSET);
+    my $ca_cert_size = axtlsp::ssl_get_config(
+            $axtlsp::SSL_MAX_CA_CERT_CFG_OFFSET);
+
+    while ($i <= $#ARGV)
+    {
+        if ($ARGV[$i] eq "-connect")
+        {
+            print_client_options($build_mode, $ARGV[$i]) if $i >= $#ARGV;
+            ($host, $port) = split(':', $ARGV[++$i]);
+        }
+        elsif ($ARGV[$i] eq "-cert")
+        {
+            print_client_options($build_mode, $ARGV[$i]) 
+                if $i >= $#ARGV || $#cert >= $cert_size-1;
+
+            push @cert, $ARGV[++$i];
+        }
+        elsif ($ARGV[$i] eq "-key")
+        {
+            print_client_options($build_mode, $ARGV[$i]) if $i >= $#ARGV;
+            $private_key_file = $ARGV[++$i];
+            $options |= $axtlsp::SSL_NO_DEFAULT_KEY;
+        }
+        elsif ($ARGV[$i] eq "-CAfile")
+        {
+            print_client_options($build_mode, $ARGV[$i]) 
+                if $i >= $#ARGV || $#ca_cert >= $ca_cert_size-1;
+
+            push @ca_cert, $ARGV[++$i];
+        }
+        elsif ($ARGV[$i] eq "-verify")
+        {
+            $options &= ~$axtlsp::SSL_SERVER_VERIFY_LATER;
+        }
+        elsif ($ARGV[$i] eq "-reconnect")
+        {
+            $reconnect = 4;
+        }
+        elsif ($ARGV[$i] eq "-quiet")
+        {
+            $quiet = 1;
+            $options &= ~$axtlsp::SSL_DISPLAY_CERTS;
+        }
+        elsif ($ARGV[$i] eq "-pass")
+        {
+            print_server_options($build_mode, $ARGV[$i]) if $i >= $#ARGV;
+            $password = $ARGV[++$i];
+        }
+        elsif ($build_mode == $axtlsp::SSL_BUILD_FULL_MODE)
+        {
+            if ($ARGV[$i] eq "-debug")
+            {
+                $options |= $axtlsp::SSL_DISPLAY_BYTES;
+            }
+            elsif ($ARGV[$i] eq "-state")
+            {
+                $options |= $axtlsp::SSL_DISPLAY_STATES;
+            }
+            elsif ($ARGV[$i] eq "-show-rsa")
+            {
+                $options |= $axtlsp::SSL_DISPLAY_RSA;
+            }
+            else    # don't know what this is
+            {
+                print_client_options($build_mode, $ARGV[$i]);
+            }
+        }
+        else    # don't know what this is
+        {
+            print_client_options($build_mode, $ARGV[$i]);
+        }
+
+        $i++;
+    }
+
+    my $client_sock = new IO::Socket::INET (
+                        PeerAddr => $host, PeerPort => $port, Proto => 'tcp')
+                    || die ("no socket: $!");
+    my $ssl;
+    my $res;
+    my $native_sock = get_native_sock($client_sock->fileno);
+
+    printf("CONNECTED\n") if not $quiet;
+
+    ###########################################################################
+    # This is where the interesting stuff happens. Up until now we've
+    # just been setting up sockets etc. Now we do the SSL handshake.
+    ###########################################################################
+    my $ssl_ctx = axtlsp::ssl_ctx_new($options, $axtlsp::SSL_DEFAULT_CLNT_SESS);
+    die "Error: Client context is invalid" if not defined $ssl_ctx;
+
+    if (defined $private_key_file)
+    {
+        my $obj_type = $axtlsp::SSL_OBJ_RSA_KEY;
+
+        $obj_type = $axtlsp::SSL_OBJ_PKCS8 if $private_key_file =~ /.p8$/;
+        $obj_type = $axtlsp::SSL_OBJ_PKCS12 if $private_key_file =~ /.p12$/;
+
+        die "Private key '$private_key_file' is undefined." if 
+                axtlsp::ssl_obj_load($ssl_ctx, $obj_type,
+                        $private_key_file, $password);
+    }
+
+    foreach (@cert)
+    {
+        die "Certificate '$_' is undefined." 
+            if axtlsp::ssl_obj_load($ssl_ctx, $axtlsp::SSL_OBJ_X509_CERT, 
+                    $_, undef) != $axtlsp::SSL_OK;
+    }
+
+    foreach (@ca_cert)
+    {
+        die "Certificate '$_' is undefined." 
+            if axtlsp::ssl_obj_load($ssl_ctx, $axtlsp::SSL_OBJ_X509_CACERT, 
+                    $_, undef) != $axtlsp::SSL_OK;
+    }
+
+    # Try session resumption?
+    if ($reconnect)
+    {
+        my $session_id = undef;
+        my $sess_id_size = 0;
+
+        while ($reconnect--)
+        {
+            $ssl = axtlsp::ssl_client_new($ssl_ctx, $native_sock, 
+                            $session_id, $sess_id_size);
+
+            $res = axtlsp::ssl_handshake_status($ssl);
+            if ($res != $axtlsp::SSL_OK)
+            {
+                axtlsp::ssl_display_error($res) if !$quiet;
+                axtlsp::ssl_free($ssl);
+                exit 1;
+            }
+
+            display_session_id($ssl);
+            $session_id = axtlsp::ssl_get_session_id($ssl);
+
+            if ($reconnect)
+            {
+                axtlsp::ssl_free($ssl);
+                $client_sock->close;
+                $client_sock = new IO::Socket::INET (
+                        PeerAddr => $host, PeerPort => $port, Proto => 'tcp')
+                    || die ("no socket: $!");
+
+            }
+        }
+    }
+    else
+    {
+        $ssl = axtlsp::ssl_client_new($ssl_ctx, $native_sock, undef, 0);
+    }
+
+    # check the return status
+    $res = axtlsp::ssl_handshake_status($ssl);
+    if ($res != $axtlsp::SSL_OK)
+    {
+        axtlsp::ssl_display_error($res) if not $quiet;
+        exit 1;
+    }
+
+    if (!$quiet)
+    {
+        my $common_name = axtlsp::ssl_get_cert_dn($ssl, 
+                    $axtlsp::SSL_X509_CERT_COMMON_NAME);
+
+        printf("Common Name:\t\t\t%s\n", $common_name) if defined $common_name;
+        display_session_id($ssl);
+        display_cipher($ssl);
+    }
+
+    while (<STDIN>)
+    {
+        my $cstring = pack("a*x", $_);   # add null terminator
+        $res = axtlsp::ssl_write($ssl, \$cstring, length($cstring));
+        if ($res < $axtlsp::SSL_OK)
+        {
+            axtlsp::ssl_display_error($res) if not $quiet;
+            last;
+        }
+    }
+
+    axtlsp::ssl_ctx_free($ssl_ctx);
+    $client_sock->close;
+}
+
+#
+# We've had some sort of command-line error. Print out the basic options.
+#
+sub print_options
+{
+    my ($option) = @_;
+    printf("axssl: Error: '%s' is an invalid command.\n", $option);
+    printf("usage: axssl [s_server|s_client|version] [args ...]\n");
+    exit 1;
+}
+
+#
+# We've had some sort of command-line error. Print out the server options.
+#
+sub print_server_options
+{
+    my ($build_mode, $option) = @_;
+    my $cert_size = axtlsp::ssl_get_config($axtlsp::SSL_MAX_CERT_CFG_OFFSET);
+    my $ca_cert_size = axtlsp::ssl_get_config(
+            $axtlsp::SSL_MAX_CA_CERT_CFG_OFFSET);
+
+    printf("unknown option %s\n", $option);
+    printf("usage: s_server [args ...]\n");
+    printf(" -accept arg\t- port to accept on (default is 4433)\n");
+    printf(" -quiet\t\t- No server output\n");
+
+    if ($build_mode >= $axtlsp::SSL_BUILD_SERVER_ONLY)
+    {
+        printf(" -cert arg\t- certificate file to add (in addition to default)".
+                                        " to chain -\n".
+          "\t\t  Can repeat up to %d times\n", $cert_size);
+        printf(" -key arg\t- Private key file to use - default DER format\n");
+        printf(" -pass\t\t- private key file pass phrase source\n");
+    }
+
+    if ($build_mode >= $axtlsp::SSL_BUILD_ENABLE_VERIFICATION)
+    {
+        printf(" -verify\t- turn on peer certificate verification\n");
+        printf(" -CAfile arg\t- Certificate authority - default DER format\n");
+        printf("\t\t  Can repeat up to %d times\n", $ca_cert_size);
+    }
+
+    if ($build_mode == $axtlsp::SSL_BUILD_FULL_MODE)
+    {
+        printf(" -debug\t\t- Print more output\n");
+        printf(" -state\t\t- Show state messages\n");
+        printf(" -show-rsa\t- Show RSA state\n");
+    }
+
+    exit 1;
+}
+
+#
+# We've had some sort of command-line error. Print out the client options.
+#
+sub print_client_options
+{
+    my ($build_mode, $option) = @_;
+    my $cert_size = axtlsp::ssl_get_config($axtlsp::SSL_MAX_CERT_CFG_OFFSET);
+    my $ca_cert_size = axtlsp::ssl_get_config(
+            $axtlsp::SSL_MAX_CA_CERT_CFG_OFFSET);
+
+    printf("unknown option %s\n", $option);
+
+    if ($build_mode >= $axtlsp::SSL_BUILD_ENABLE_CLIENT)
+    {
+        printf("usage: s_client [args ...]\n");
+        printf(" -connect host:port - who to connect to (default ".
+                "is localhost:4433)\n");
+        printf(" -verify\t- turn on peer certificate verification\n");
+        printf(" -cert arg\t- certificate file to use - default DER format\n");
+        printf(" -key arg\t- Private key file to use - default DER format\n");
+        printf("\t\t  Can repeat up to %d times\n", $cert_size);
+        printf(" -CAfile arg\t- Certificate authority - default DER format\n");
+        printf("\t\t  Can repeat up to %d times\n", $ca_cert_size);
+        printf(" -quiet\t\t- No client output\n");
+        printf(" -pass\t\t- private key file pass phrase source\n");
+        printf(" -reconnect\t- Drop and re-make the connection ".
+                "with the same Session-ID\n");
+
+        if ($build_mode == $axtlsp::SSL_BUILD_FULL_MODE)
+        {
+            printf(" -debug\t\t- Print more output\n");
+            printf(" -state\t\t- Show state messages\n");
+            printf(" -show-rsa\t- Show RSA state\n");
+        }
+    }
+    else
+    {
+        printf("Change configuration to allow this feature\n");
+    }
+
+    exit 1;
+}
+
+#
+# Display what cipher we are using 
+#
+sub display_cipher
+{
+    my ($ssl) = @_;
+    printf("CIPHER is ");
+    my $cipher_id = axtlsp::ssl_get_cipher_id($ssl);
+
+    if ($cipher_id == $axtlsp::SSL_AES128_SHA)
+    {
+        printf("AES128-SHA");
+    }
+    elsif ($cipher_id == $axtlsp::SSL_AES256_SHA)
+    {
+        printf("AES256-SHA");
+    }
+    elsif ($axtlsp::SSL_RC4_128_SHA)
+    {
+        printf("RC4-SHA");
+    }
+    elsif ($axtlsp::SSL_RC4_128_MD5)
+    {
+        printf("RC4-MD5");
+    }
+    else 
+    {
+        printf("Unknown - %d", $cipher_id);
+    }
+
+    printf("\n");
+}
+
+#
+# Display what session id we have.
+#
+sub display_session_id
+{    
+    my ($ssl) = @_;
+    my $session_id = axtlsp::ssl_get_session_id($ssl);
+    if (length($$session_id) > 0)
+    {
+        printf("-----BEGIN SSL SESSION PARAMETERS-----\n");
+        printf(unpack("H*", $$session_id));
+        printf("\n-----END SSL SESSION PARAMETERS-----\n");
+    }
+}