remote-update: remove ancient non-maintained package

Remove the ancient 'remote-update' package that has not been
updated for years. It e.g. references two non-existing targets.

Reference to discussion in #995

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

2 files changed, 0 insertions, 349 deletions

diff --git a/contrib/package/remote-update/Makefile b/contrib/package/remote-update/Makefile
deleted file mode 100644
index 4f8b3a596..000000000
--- a/contrib/package/remote-update/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# Copyright (C) 2009 Jo-Philipp Wich <jow@openwrt.org>
-#
-# This is free software, licensed under the Apache 2.0 license.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=remote-update
-PKG_RELEASE:=4
-
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/remote-update
-  SECTION:=luci
-  CATEGORY:=LuCI
-  SUBMENU:=9. Freifunk
-  TITLE:=Freifunk remote update utility.
-  DEPENDS:=@TARGET_atheros||@TARGET_ar71xx||@TARGET_brcm_2_4
-endef
-
-define Package/remote-update/description
-  The freifunk remote-update utility uses sysupgrade to reflash the currently 
-  running firmware while keeping most of the existing configuratio.
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-endef
-
-define Build/Configure
-endef
-
-define Build/Compile
-endef
-
-define Package/remote-update/install
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,remote-update))
diff --git a/contrib/package/remote-update/files/usr/sbin/remote-update b/contrib/package/remote-update/files/usr/sbin/remote-update
deleted file mode 100755
index 6e45e482b..000000000
--- a/contrib/package/remote-update/files/usr/sbin/remote-update
+++ /dev/null
@@ -1,306 +0,0 @@
-#!/bin/sh
-
-local tempfile=/tmp/remote-upgrade.img
-local D2='\([0-9]\{2\}\)'
-local D4='\([0-9]\{4\}\)'
-local NL='
-'
-
-find_architecture()
-{
-	local ifs="$IFS"; IFS="-"
-	set -- $(opkg list_installed kernel)
-	IFS="$ifs"
-
-	echo "$3"
-}
-
-find_image()
-{
-	case "$1" in
-		atheros)
-			echo "openwrt-atheros-combined.squashfs.img"
-		;;
-		ar71xx)
-			echo "openwrt-ar71xx-combined.squashfs.img"
-		;;
-		brcm)
-			echo "openwrt-brcm-2.4-squashfs.trx"
-		;;
-	esac
-}
-
-check_image()
-{
-	local file; for file in /lib/upgrade/*.sh; do . $file; done
-	if platform_check_image "$1" >/dev/null 2>/dev/null; then
-		return 0
-	fi
-	return 1
-}
-
-find_remote_checksum()
-{
-	wget -qO- ${1%/*}/md5sums 2>/dev/null | \
-		sed -ne '/'$2'/ { s/ .*//p }'
-}
-
-find_local_checksum()
-{
-	set -- $(md5sum "$tempfile")
-	echo $1
-}
-
-find_remote_info()
-{
-	wget -qO- "${1%/*}/VERSION.txt" 2>/dev/null
-}
-
-find_remote_version()
-{
-	find_remote_info "$1" | \
-		sed -ne "s!.*$D4/$D2/$D2 $D2:$D2.*!\\1\\2\\3\\4\\5!p;t"
-}
-
-find_local_version()
-{
-	if [ -f /rom/etc/banner ]; then
-		sed -ne "s!.*$D4/$D2/$D2 $D2:$D2.*!\\1\\2\\3\\4\\5!p;t" \
-			/rom/etc/banner
-	else
-		date +"%Y%m%d%H%M" -r /bin/sh
-	fi
-}
-
-stop_service()
-{
-	[ -x /etc/init.d/$1 ] && {
-		echo -n "Stopping service $1 ... "
-		/etc/init.d/$1 stop >/dev/null 2>/dev/null
-		echo "done"
-	}
-}
-
-do_wait()
-{
-	if [ ${1:-0} -gt 0 ]; then
-		echo -n "${2:-Waiting} "
-		for i in $(seq 1 $1); do
-			printf "%-2dseconds" $(($1-$i))
-			sleep 1
-			echo -en "\b\b\b\b\b\b\b\b\b"
-		done
-		echo "${NL}"
-	fi
-}
-
-version_compare()
-{
-	local v1="$1"
-	local v2="$2"
-
-	while [ -n "$v1" -o -n "$v2" ]; do
-		if [ -z "${v2:0:4}" -o "${v1:0:4}" -gt "${v2:0:4}" ]; then
-			return 1
-		elif [ -z "${v1:0:4}" -o "${v1:0:4}" -lt "${v2:0:4}" ]; then
-			return 2
-		fi
-
-		v1="${v1:4}"
-		v2="${v2:4}"
-	done
-
-	return 0
-}
-
-usage()
-{
-	cat <<EOT
-
-Usage:
-  remote-update -h
-  remote-update [-u <update url>] -c
-  remote-update [-v] [-y] [-u <update url>] -w
-  remote-update [-d] [-n] [-v] [-y] [-s <sleep seconds>] [-u <update url>]
-
-Actions:
-  -h    Display this help message and exit.
-  -c    Check for firmware update and exit.
-  -w    Fetch image and exit, do not perform flash write.
-
-Options:
-  -d    Do not detach from terminal.
-  -n    Do not backup configuration.
-  -v    Skip verification of downloaded image.
-  -y    Assume defaults for all questions.
-
-  -s <seconds>
-    Sleep given amount of seconds before starting flash write.
-    If ommitted and '-y' is not used, 5 seconds are assumed.
-
-  -u <url>
-    Fetch firmware image from given url. A file "md5sums" is expected
-    in the same remote directory. If there is no such file, use -v to
-    suppress verification.
-
-EOT
-
-	exit 1
-}
-
-
-while getopts "s:u:cdnvwyh" flag; do
-	case $flag in
-		s) sleeptime="$OPTARG";;
-		u) updateurl="$OPTARG";;
-		c) checkupdate=1;;
-		d) nodetach=1;;
-		n) nobackup=1;;
-		v) noverify=1;;
-		w) noflash=1;;
-		y) noquestions=1;;
-		*) usage;;
-	esac
-done
-
-
-local image_url="$updateurl"
-local image_name="${image_url##*/}"
-
-[ -z "$image_url" ] && {
-	local arch=$(find_architecture)
-	local image=$(find_image "$arch")
-	local repo=$(uci get freifunk.upgrade.repository 2>/dev/null)
-	repo=${repo:-$(uci get system.upgrade.repository 2>/dev/null)}
-
-	[ -z "$arch" ] && {
-		echo "Can not determine the current architecture."
-		exit 1
-	}
-
-	[ -z "$repo" ] && {
-		echo "No repository configured in 'system.upgrade.repository'."
-		echo "Use the '-u' flag to specify an image location."
-		exit 1
-	}
-
-	[ -z "$image" ] && {
-		echo "No suitable image for the '$arch' architecture."
-		echo "Your platform is not supported."
-		exit 1
-	}
-
-	echo "Architecture: $arch"
-	echo "Repository:   $repo"
-
-	image_name="$image"
-	image_url="${repo%/}/$arch/$image"
-}
-
-
-if [ "$checkupdate" = 1 ]; then
-	local v1=$(find_local_version)
-	local v2=$(find_remote_version "$image_url")
-
-	[ -n "$v1" -a -n "$v2" ] && {
-		version_compare "$v1" "$v2"
-		[ $? == 2 ] && {
-			echo "Update available!${NL}Local:  $v1${NL}Remote: $v2${NL}--"
-			find_remote_info "$image_url"
-			exit 0
-		} || {
-			echo "Local version $v1 is up to date"
-			exit 2
-		}
-	} || {
-		echo "No remote time stamp found."
-		exit 1
-	}
-else
-	if [ "$noquestions" != 1 ]; then
-		echo -n "${NL}About to download $image_name. Continue? [y] "
-		read answer
-		case "$answer" in
-			[nN]) exit 1;;
-		esac
-	fi
-
-	echo -n "Downloading $image_name ... "
-	rm -f $tempfile
-	wget -qO $tempfile "$image_url" 2>/dev/null
-	[ $? == 0 ] && echo done || {
-		echo failed
-		rm -f $tempfile
-		exit 1
-	}
-
-	if [ "$noverify" != 1 ]; then
-		echo -n "Verifying $image_name ... "
-
-		local md5_remote=$(find_remote_checksum "$image_url" "$image_name")
-		local md5_local=$(find_local_checksum)
-
-		check_image "$tempfile"
-		local image_ok=$?
-
-		if [ $image_ok = 0 -a -n "$md5_remote" -a -n "$md5_local" -a "$md5_remote" = "$md5_local" ]; then
-			echo "done"
-		else
-			if [ $image_ok != 0 ]; then
-				echo "unsupported image type"
-			else
-				echo "checksum mismatch! (local:${md5_local:-(none)} remote:${md5_remote:-(none)})"
-			fi
-
-			local answer=n
-			if [ "$noquestions" != 1 ]; then
-				echo -n "${NL}Verification failed. Continue anyway? [n] "
-				read answer
-			fi
-
-			case "$answer" in
-				[yYjJ]*) : ;;
-				*)
-					echo "Aborting."
-					rm -f $tempfile
-					exit 1
-				;;
-			esac
-		fi
-	fi
-
-	if [ "$noflash" != 1 ]; then
-		if [ -f "$tempfile" ]; then
-			if [ "$noquestions" == 1 ]; then
-				do_wait ${sleeptime:-5} "${NL}About to start flashing, hit <Ctrl-C> to abort!${NL}${NL}Starting in"
-			else
-				if [ -z "$nobackup" ]; then
-					echo -n "${NL}Keep configuration files? [y] "
-					read answer
-					case "$answer" in
-						[nN]) nobackup=1;;
-					esac
-				fi
-
-				echo -n "${NL}About to start flashing!${NL}Hit <Enter> to continue or <Ctrl-C> to abort.${NL}"
-				read answer
-			fi
-
-			for s in lucid collectd; do stop_service $s; done
-
-			if [ "$nodetach" != 1 ]; then
-				echo -n "Starting sysupgrade in background ... "
-				/bin/busybox start-stop-daemon -S -b -x /sbin/sysupgrade -- ${nobackup:+-n} "$tempfile"
-				echo "done"
-			else
-				echo "Executing sysupgrade ... "
-				exec /sbin/sysupgrade ${nobackup:+-n} "$tempfile"
-			fi
-		else
-			echo "No upgrade image found!"
-			exit 1
-		fi
-	else
-		echo "Image saved in '$tempfile'"
-	fi
-fi