Merge pull request #3450 from urbalazs/typos-olsr

luci-app-olsr: fix typos

35 files changed, 190 insertions, 190 deletions

diff --git a/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua b/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua
index 90a615699a..79c9d5da61 100644
--- a/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua
+++ b/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua
@@ -71,9 +71,9 @@ tos.placeholder = "16"
 fib = s:taboption("general", ListValue, "FIBMetric", translate("FIB metric"),
 	translate ("FIBMetric controls the metric value of the host-routes OLSRd sets. "..
 	"\"flat\" means that the metric value is always 2. This is the preferred value "..
-	"because it helps the linux kernel routing to clean up older routes. "..
+	"because it helps the Linux kernel routing to clean up older routes. "..
 	"\"correct\" uses the hopcount as the metric value. "..
-	"\"approx\" use the hopcount as the metric value too, but does only update the hopcount if the nexthop changes too. "..
+	"\"approx\" uses the hopcount as the metric value too, but does only update the hopcount if the nexthop changes too. "..
 	"Default is \"flat\"."))
 fib:value("flat")
 fib:value("correct")
@@ -144,7 +144,7 @@ sgw.enabled="yes"
 sgw.disabled="no"
 sgw.rmempty = true
 
-sgwnat = s:taboption("smartgw", Flag, "SmartGatewayAllowNAT", translate("Allow gateways with NAT"), translate("Allow the selection of an outgoing ipv4 gateway with NAT"))
+sgwnat = s:taboption("smartgw", Flag, "SmartGatewayAllowNAT", translate("Allow gateways with NAT"), translate("Allow the selection of an outgoing IPv4 gateway with NAT"))
 sgwnat:depends("SmartGateway", "yes")
 sgwnat.default="yes"
 sgwnat.enabled="yes"
diff --git a/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua b/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua
index 0206b67dc0..bb3567677f 100644
--- a/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua
+++ b/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua
@@ -65,9 +65,9 @@ tos.placeholder = "16"
 fib = s:taboption("general", ListValue, "FIBMetric", translate("FIB metric"),
 	translate ("FIBMetric controls the metric value of the host-routes OLSRd sets. "..
 	"\"flat\" means that the metric value is always 2. This is the preferred value "..
-	"because it helps the linux kernel routing to clean up older routes. "..
+	"because it helps the Linux kernel routing to clean up older routes. "..
 	"\"correct\" uses the hopcount as the metric value. "..
-	"\"approx\" use the hopcount as the metric value too, but does only update the hopcount if the nexthop changes too. "..
+	"\"approx\" uses the hopcount as the metric value too, but does only update the hopcount if the nexthop changes too. "..
 	"Default is \"flat\"."))
 fib:value("flat")
 fib:value("correct")
@@ -138,7 +138,7 @@ sgw.enabled="yes"
 sgw.disabled="no"
 sgw.rmempty = true
 
-sgwnat = s:taboption("smartgw", Flag, "SmartGatewayAllowNAT", translate("Allow gateways with NAT"), translate("Allow the selection of an outgoing ipv4 gateway with NAT"))
+sgwnat = s:taboption("smartgw", Flag, "SmartGatewayAllowNAT", translate("Allow gateways with NAT"), translate("Allow the selection of an outgoing IPv4 gateway with NAT"))
 sgwnat:depends("SmartGateway", "yes")
 sgwnat.default="yes"
 sgwnat.enabled="yes"
diff --git a/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua b/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua
index e4b093aa13..230990dd0a 100644
--- a/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua
+++ b/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua
@@ -5,7 +5,7 @@
 local uci = require "luci.model.uci".cursor()
 local ipv =  uci:get_first("olsrd", "olsrd", "IpVersion", "4")
 
-mh = Map("olsrd", translate("OLSR - HNA-Announcements"), translate("Hosts in a OLSR routed network can announce connecitivity " ..
+mh = Map("olsrd", translate("OLSR - HNA-Announcements"), translate("Hosts in an OLSR routed network can announce connectivity " ..
 	"to external networks using HNA messages."))
 
 if ipv == "6and4" or ipv == "4" then
diff --git a/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua b/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua
index 682421ff7a..717436b130 100644
--- a/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua
+++ b/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua
@@ -4,7 +4,7 @@
 
 local uci = require "luci.model.uci".cursor()
 
-mh = Map("olsrd6", translate("OLSR - HNA6-Announcements"), translate("Hosts in a OLSR routed network can announce connecitivity " ..
+mh = Map("olsrd6", translate("OLSR - HNA6-Announcements"), translate("Hosts in an OLSR routed network can announce connectivity " ..
 	"to external networks using HNA6 messages."))
 
 	hna6 = mh:section(TypedSection, "Hna6", translate("Hna6"), translate("IPv6 network must be given in full notation, " ..
diff --git a/applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm b/applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm
index 8cd2088e42..99da8154be 100644
--- a/applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm
+++ b/applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm
@@ -27,7 +27,7 @@ if luci.http.formvalue("status") == "1" then
 			proto = gw.IPv4 and '4' or '6',
 			originator = gw.originator,
 			selected = gw.selected and luci.i18n.translate('yes') or luci.i18n.translate('no'),
-			cost = gw.cost > 0 and string.format("%.3f", gw.cost) or luci.i18n.translate('infinate'),
+			cost = gw.cost > 0 and string.format("%.3f", gw.cost) or luci.i18n.translate('infinite'),
 			hops = gw.hops,
 			uplink = gw.uplink,
 			downlink = gw.downlink,
@@ -131,7 +131,7 @@ XHR.poll(10, '<%=REQUEST_URI%>', { status: 1 },
 				<% end %>
 
 				<div class="td cbi-section-table-cell left"><%=gw.selected and luci.i18n.translate('yes') or luci.i18n.translate('no')%></div>
-				<div class="td cbi-section-table-cell left"><%=gw.cost > 0 and string.format("%.3f", gw.cost) or luci.i18n.translate('infinate')%></div>
+				<div class="td cbi-section-table-cell left"><%=gw.cost > 0 and string.format("%.3f", gw.cost) or luci.i18n.translate('infinite')%></div>
 				<div class="td cbi-section-table-cell left"><%=gw.hops%></div>
 				<div class="td cbi-section-table-cell left"><%=gw.uplink%></div>
 				<div class="td cbi-section-table-cell left"><%=gw.downlink%></div>
diff --git a/applications/luci-app-olsr/po/bg/olsr.po b/applications/luci-app-olsr/po/bg/olsr.po
index ba88504d05..123ac06447 100644
--- a/applications/luci-app-olsr/po/bg/olsr.po
+++ b/applications/luci-app-olsr/po/bg/olsr.po
@@ -36,7 +36,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -152,8 +152,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -274,13 +274,13 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1087,7 +1087,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/ca/olsr.po b/applications/luci-app-olsr/po/ca/olsr.po
index 5f2eb5da2a..da1ae9d98c 100644
--- a/applications/luci-app-olsr/po/ca/olsr.po
+++ b/applications/luci-app-olsr/po/ca/olsr.po
@@ -40,7 +40,7 @@ msgstr "Permet els passarel·les amb NAT "
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -156,8 +156,8 @@ msgstr "Mètrica FIB"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -279,13 +279,13 @@ msgstr "Nom de l’amfitrió"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1093,7 +1093,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/cs/olsr.po b/applications/luci-app-olsr/po/cs/olsr.po
index e4a0643702..9792cce438 100644
--- a/applications/luci-app-olsr/po/cs/olsr.po
+++ b/applications/luci-app-olsr/po/cs/olsr.po
@@ -36,7 +36,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -152,8 +152,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -274,13 +274,13 @@ msgstr "Název počítače"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1087,7 +1087,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/de/olsr.po b/applications/luci-app-olsr/po/de/olsr.po
index c15be62df5..5591eed16f 100644
--- a/applications/luci-app-olsr/po/de/olsr.po
+++ b/applications/luci-app-olsr/po/de/olsr.po
@@ -38,7 +38,7 @@ msgstr "Gateways mit NAT erlauben"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr "Auswahl von IPv4-Gateways erlauben, die zum Internet hin NAT verwenden"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -158,8 +158,8 @@ msgstr "FIB-Metrik"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -289,7 +289,7 @@ msgstr "Hostname"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 "Rechner in einem OLSR-geroutetem Netzwerk können Konnektivität zu externen "
@@ -298,7 +298,7 @@ msgstr ""
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 #, fuzzy
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 "Rechner in einem OLSR-geroutetem Netzwerk können Konnektivität zu externen "
@@ -1201,7 +1201,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/el/olsr.po b/applications/luci-app-olsr/po/el/olsr.po
index d502d6331f..11bfd1f142 100644
--- a/applications/luci-app-olsr/po/el/olsr.po
+++ b/applications/luci-app-olsr/po/el/olsr.po
@@ -38,7 +38,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -154,8 +154,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -276,13 +276,13 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1089,7 +1089,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/en/olsr.po b/applications/luci-app-olsr/po/en/olsr.po
index ee68cdf692..b28157eb5b 100644
--- a/applications/luci-app-olsr/po/en/olsr.po
+++ b/applications/luci-app-olsr/po/en/olsr.po
@@ -37,7 +37,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -153,8 +153,8 @@ msgstr "FIB metric"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -276,13 +276,13 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1090,7 +1090,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/es/olsr.po b/applications/luci-app-olsr/po/es/olsr.po
index 683f18ff19..db5ea7e89a 100644
--- a/applications/luci-app-olsr/po/es/olsr.po
+++ b/applications/luci-app-olsr/po/es/olsr.po
@@ -38,7 +38,7 @@ msgstr "Permitir puertas de enlace con NAT"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr "Permitir seleccionar una pasarela IPv4 con NAT"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -158,8 +158,8 @@ msgstr "Métrica FIB"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -286,7 +286,7 @@ msgstr "Nombre de host"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 "Las máquinas de una red OLSR pueden declarar conectividad con redes externas "
@@ -294,7 +294,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 "Los hosts en una red enrutada OLSR pueden anunciar la conectividad a redes "
@@ -1198,7 +1198,7 @@ msgstr "abajo"
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr "infinito"
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/fr/olsr.po b/applications/luci-app-olsr/po/fr/olsr.po
index 66dbf3f167..6c0f3032dd 100644
--- a/applications/luci-app-olsr/po/fr/olsr.po
+++ b/applications/luci-app-olsr/po/fr/olsr.po
@@ -38,7 +38,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -154,8 +154,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -276,13 +276,13 @@ msgstr "Nom d'hôte"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1089,7 +1089,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/he/olsr.po b/applications/luci-app-olsr/po/he/olsr.po
index 5d34821121..d3cc11444f 100644
--- a/applications/luci-app-olsr/po/he/olsr.po
+++ b/applications/luci-app-olsr/po/he/olsr.po
@@ -32,7 +32,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -148,8 +148,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -270,13 +270,13 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1083,7 +1083,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/hi/olsr.po b/applications/luci-app-olsr/po/hi/olsr.po
index f7a8c525de..34494aad8b 100644
--- a/applications/luci-app-olsr/po/hi/olsr.po
+++ b/applications/luci-app-olsr/po/hi/olsr.po
@@ -36,7 +36,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -152,8 +152,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -274,13 +274,13 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1087,7 +1087,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/hu/olsr.po b/applications/luci-app-olsr/po/hu/olsr.po
index 146bca89c4..748c10243a 100644
--- a/applications/luci-app-olsr/po/hu/olsr.po
+++ b/applications/luci-app-olsr/po/hu/olsr.po
@@ -36,7 +36,7 @@ msgstr "Engedélyezett átjárók NAT-tal"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 "Egy NAT-tal rendelkező kimenő IPv4-átjáró kiválasztásának lehetővé tétele"
 
@@ -158,8 +158,8 @@ msgstr "FIB mérőszám"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -289,7 +289,7 @@ msgstr "Gépnév"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 "Egy OLSR által forgalomirányított hálózatban lévő gépek bejelenthetik a "
@@ -297,7 +297,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 "Egy OLSR által forgalomirányított hálózatban lévő gépek bejelenthetik a "
@@ -1220,7 +1220,7 @@ msgstr "le"
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr "végtelen"
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/it/olsr.po b/applications/luci-app-olsr/po/it/olsr.po
index 06e2a83a64..9fd90e1eae 100644
--- a/applications/luci-app-olsr/po/it/olsr.po
+++ b/applications/luci-app-olsr/po/it/olsr.po
@@ -38,7 +38,7 @@ msgstr "Permetti gateway con NAT"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr "Permetti l'uso di gateway in uscita con NAT"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -156,8 +156,8 @@ msgstr "Metrica FIB"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -279,13 +279,13 @@ msgstr "Nome Host"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1127,7 +1127,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/ja/olsr.po b/applications/luci-app-olsr/po/ja/olsr.po
index 31de79d870..ac028e5f03 100644
--- a/applications/luci-app-olsr/po/ja/olsr.po
+++ b/applications/luci-app-olsr/po/ja/olsr.po
@@ -37,7 +37,7 @@ msgstr "NATを使用するゲートウェイを選択可能にする"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr "NATを介してパケットを送信するIPv4 ゲートウェイを選択可能にします"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -155,8 +155,8 @@ msgstr "FIB メトリック"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -284,13 +284,13 @@ msgstr "ホスト名"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1185,7 +1185,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/ko/olsr.po b/applications/luci-app-olsr/po/ko/olsr.po
index e54ea113ac..bb211c53d1 100644
--- a/applications/luci-app-olsr/po/ko/olsr.po
+++ b/applications/luci-app-olsr/po/ko/olsr.po
@@ -36,7 +36,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -152,8 +152,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -274,13 +274,13 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1087,7 +1087,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/mr/olsr.po b/applications/luci-app-olsr/po/mr/olsr.po
index 0ea3e57078..1ff1cc8c91 100644
--- a/applications/luci-app-olsr/po/mr/olsr.po
+++ b/applications/luci-app-olsr/po/mr/olsr.po
@@ -38,7 +38,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -154,8 +154,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -276,13 +276,13 @@ msgstr "होस्टनाव"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1089,7 +1089,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/ms/olsr.po b/applications/luci-app-olsr/po/ms/olsr.po
index f02ff69a90..418452e347 100644
--- a/applications/luci-app-olsr/po/ms/olsr.po
+++ b/applications/luci-app-olsr/po/ms/olsr.po
@@ -31,7 +31,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -147,8 +147,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -269,13 +269,13 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1082,7 +1082,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/no/olsr.po b/applications/luci-app-olsr/po/no/olsr.po
index ba78297673..735538cfc0 100644
--- a/applications/luci-app-olsr/po/no/olsr.po
+++ b/applications/luci-app-olsr/po/no/olsr.po
@@ -36,7 +36,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -152,8 +152,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -274,13 +274,13 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1087,7 +1087,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/pl/olsr.po b/applications/luci-app-olsr/po/pl/olsr.po
index 9927216a33..8c7372973d 100644
--- a/applications/luci-app-olsr/po/pl/olsr.po
+++ b/applications/luci-app-olsr/po/pl/olsr.po
@@ -37,7 +37,7 @@ msgstr "Zezwól na bramy z NAT"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr "Zezwól na wybieranie wychodzącej bramy IPv4 przez NAT"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -159,8 +159,8 @@ msgstr "Metryka FIB"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -285,7 +285,7 @@ msgstr "Nazwa hosta"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 "Hosty w sieci OLSR mogą ogłaszać połączenia z zewnętrznymi sieciami poprzez "
@@ -294,7 +294,7 @@ msgstr ""
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 #, fuzzy
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 "Hosty w sieci OLSR mogą ogłaszać połączenia z zewnętrznymi sieciami poprzez "
@@ -1141,7 +1141,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/pt-br/olsr.po b/applications/luci-app-olsr/po/pt-br/olsr.po
index 6cdcf8d65a..67a5e7445e 100644
--- a/applications/luci-app-olsr/po/pt-br/olsr.po
+++ b/applications/luci-app-olsr/po/pt-br/olsr.po
@@ -40,7 +40,7 @@ msgstr "Permitir rotadores com NAT"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr "Permitir a seleção de rotador de saída IPv4 com NAT"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -169,8 +169,8 @@ msgstr "Métrica FIB"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -315,7 +315,7 @@ msgstr "Nome do equipamento"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 "Equipamentos em uma rede roteada por OLSR podem anunciar conectividade para "
@@ -323,7 +323,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 "Equipamentos em uma rede roteada por OLSR podem anunciar conectividade para "
@@ -1271,7 +1271,7 @@ msgstr "inoperante"
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr "infinito"
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/pt/olsr.po b/applications/luci-app-olsr/po/pt/olsr.po
index cbe9cc55f3..fa1e869dd4 100644
--- a/applications/luci-app-olsr/po/pt/olsr.po
+++ b/applications/luci-app-olsr/po/pt/olsr.po
@@ -38,7 +38,7 @@ msgstr "Permitir gateways com NAT"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr "Permitir a selecção de uma gateway IPv4 para saída com NAT"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -161,8 +161,8 @@ msgstr "métrica FIB"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -296,7 +296,7 @@ msgstr "Nome do Host"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 "Equipamentos em uma rede roteada por OLSR podem anunciar conectividade para "
@@ -304,7 +304,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 "Equipamentos em uma rede roteada por OLSR podem anunciar conectividade para "
@@ -1222,7 +1222,7 @@ msgstr "para baixo"
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr "infinito"
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/ro/olsr.po b/applications/luci-app-olsr/po/ro/olsr.po
index 7c56e87121..fc9a5ae193 100644
--- a/applications/luci-app-olsr/po/ro/olsr.po
+++ b/applications/luci-app-olsr/po/ro/olsr.po
@@ -37,7 +37,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -153,8 +153,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -275,13 +275,13 @@ msgstr "Nume domeniu"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1088,7 +1088,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/ru/olsr.po b/applications/luci-app-olsr/po/ru/olsr.po
index aa868efa3a..9bb112a4ef 100644
--- a/applications/luci-app-olsr/po/ru/olsr.po
+++ b/applications/luci-app-olsr/po/ru/olsr.po
@@ -40,7 +40,7 @@ msgstr "Разрешить шлюзы с NAT"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr "Разрешить выбор исходящего IPv4 шлюза с NAT"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -162,8 +162,8 @@ msgstr "Метрика FIB"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -292,7 +292,7 @@ msgstr "Имя хоста"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 "Хосты в маршрутизируемой сети OLSR могут извещать о подключении к внешним "
@@ -300,7 +300,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 "Хосты в маршрутизируемой сети OLSR могут извещать о подключении к внешним "
@@ -1212,7 +1212,7 @@ msgstr "вниз"
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/sk/olsr.po b/applications/luci-app-olsr/po/sk/olsr.po
index ffcd368220..bbb43e6fbd 100644
--- a/applications/luci-app-olsr/po/sk/olsr.po
+++ b/applications/luci-app-olsr/po/sk/olsr.po
@@ -36,7 +36,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -152,8 +152,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -274,13 +274,13 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1087,7 +1087,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/sv/olsr.po b/applications/luci-app-olsr/po/sv/olsr.po
index 2de7aaea96..939c55a56d 100644
--- a/applications/luci-app-olsr/po/sv/olsr.po
+++ b/applications/luci-app-olsr/po/sv/olsr.po
@@ -36,7 +36,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -154,8 +154,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -276,13 +276,13 @@ msgstr "Värdnamn"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1091,7 +1091,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/templates/olsr.pot b/applications/luci-app-olsr/po/templates/olsr.pot
index 91b5830657..eee014d676 100644
--- a/applications/luci-app-olsr/po/templates/olsr.pot
+++ b/applications/luci-app-olsr/po/templates/olsr.pot
@@ -25,7 +25,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -141,8 +141,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -263,13 +263,13 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1076,7 +1076,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/tr/olsr.po b/applications/luci-app-olsr/po/tr/olsr.po
index 3385fa6541..c5eb54aa51 100644
--- a/applications/luci-app-olsr/po/tr/olsr.po
+++ b/applications/luci-app-olsr/po/tr/olsr.po
@@ -32,7 +32,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -148,8 +148,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -270,13 +270,13 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1083,7 +1083,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/uk/olsr.po b/applications/luci-app-olsr/po/uk/olsr.po
index c87a508633..121f7c4f44 100644
--- a/applications/luci-app-olsr/po/uk/olsr.po
+++ b/applications/luci-app-olsr/po/uk/olsr.po
@@ -37,7 +37,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -153,8 +153,8 @@ msgstr ""
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -275,13 +275,13 @@ msgstr "Назва (ім'я) вузла"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1088,7 +1088,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/vi/olsr.po b/applications/luci-app-olsr/po/vi/olsr.po
index 567a131a8b..b1b11ea15d 100644
--- a/applications/luci-app-olsr/po/vi/olsr.po
+++ b/applications/luci-app-olsr/po/vi/olsr.po
@@ -40,7 +40,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -156,8 +156,8 @@ msgstr "FIB metric"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -279,13 +279,13 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr ""
 
@@ -1093,7 +1093,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/zh-cn/olsr.po b/applications/luci-app-olsr/po/zh-cn/olsr.po
index 7e2eb29544..204d5d2c55 100644
--- a/applications/luci-app-olsr/po/zh-cn/olsr.po
+++ b/applications/luci-app-olsr/po/zh-cn/olsr.po
@@ -39,7 +39,7 @@ msgstr "允许带 NAT 的网关"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr "允许选择有 NAT 的 IPv4 网关"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -158,8 +158,8 @@ msgstr "FIB 度量"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -284,13 +284,13 @@ msgstr "主机名"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr "OLSR 路由网络中的主机可以使用 HNA 消息通告与外部网络的连接。"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr "OLSR 路由网络中的主机可以使用 HNA6 消息通告与外部网络的连接。"
 
@@ -1156,7 +1156,7 @@ msgstr "未连接"
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40
diff --git a/applications/luci-app-olsr/po/zh-tw/olsr.po b/applications/luci-app-olsr/po/zh-tw/olsr.po
index 007612a62b..8d2d7889e4 100644
--- a/applications/luci-app-olsr/po/zh-tw/olsr.po
+++ b/applications/luci-app-olsr/po/zh-tw/olsr.po
@@ -38,7 +38,7 @@ msgstr "允許帶 NAT 的閘道器"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:147
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua:141
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
+msgid "Allow the selection of an outgoing IPv4 gateway with NAT"
 msgstr "允許選擇有 NAT 的 IPv4 閘道器"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd.lua:155
@@ -157,8 +157,8 @@ msgstr "FIB 度量"
 msgid ""
 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
 "means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
+"it helps the Linux kernel routing to clean up older routes. \"correct\" uses "
+"the hopcount as the metric value. \"approx\" uses the hopcount as the metric "
 "value too, but does only update the hopcount if the nexthop changes too. "
 "Default is \"flat\"."
 msgstr ""
@@ -283,13 +283,13 @@ msgstr "主機名"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna.lua:8
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA messages."
 msgstr "OLSR 路由網路中的主機可以使用 HNA 訊息通告與外部網路的連線。"
 
 #: applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrdhna6.lua:7
 msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
+"Hosts in an OLSR routed network can announce connectivity to external "
 "networks using HNA6 messages."
 msgstr "OLSR 路由網路中的主機可以使用 HNA6 訊息通告與外部網路的連線。"
 
@@ -1153,7 +1153,7 @@ msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:30
 #: applications/luci-app-olsr/luasrc/view/status-olsr/smartgw.htm:134
-msgid "infinate"
+msgid "infinite"
 msgstr ""
 
 #: applications/luci-app-olsr/luasrc/view/status-olsr/interfaces.htm:40