1) Revised a lot of wording

2) Set default for SMTP authentication to off so the interface is 
   cleaner to begin with (when not configured).

5 files changed, 33 insertions, 34 deletions

diff --git a/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua b/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua
index a783c72e21..f36ca0eb59 100644
--- a/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua
+++ b/applications/luci-pbx/luasrc/model/cbi/pbx-advanced.lua
@@ -199,7 +199,7 @@ function maintain_firewall_rules()
 end
 
 m = Map (modulename, translate("Advanced Settings"),
-         translate("This section contains settings which do not need to be changed under \
+         translate("This section contains settings that do not need to be changed under \
          normal circumstances. In addition, here you can configure your system \
          for use with remote SIP devices, and resolve call quality issues by enabling \
          the insertion of QoS rules."))
@@ -247,7 +247,7 @@ s:tab("qos",  translate("QoS Settings"),
       QoS configuration page (Network->QoS) to configure other critical QoS settings like Download \
       and Upload speed."))
 
-ringtime = s:taboption("general", Value, "ringtime", translate("Number of seconds to ring"),
+ringtime = s:taboption("general", Value, "ringtime", translate("Number of Seconds to Ring"),
                  translate("Set the number of seconds to ring users upon incoming calls before hanging up \
                  or going to voicemail, if the voicemail is installed and enabled."))
 ringtime.default = 30
@@ -274,7 +274,7 @@ p.datatype = "port"
 
 p = s:taboption("remote_usage", Value, "rtpstart", translate("RTP Port Range Start"),
                 translate("RTP traffic carries actual voice packets. This is the start of the port range \
-                which will be used for setting up RTP communication. It's usually OK to leave this \
+                that will be used for setting up RTP communication. It's usually OK to leave this \
                 at the default value."))
 p.datatype = "port"
 p.default = defaultrtpstart
diff --git a/applications/luci-pbx/luasrc/model/cbi/pbx-calls.lua b/applications/luci-pbx/luasrc/model/cbi/pbx-calls.lua
index af18c6ff00..8cede198c5 100644
--- a/applications/luci-pbx/luasrc/model/cbi/pbx-calls.lua
+++ b/applications/luci-pbx/luasrc/model/cbi/pbx-calls.lua
@@ -49,7 +49,7 @@ end
 
 m = Map (modulename, translate("Call Routing"),
          translate("This is where you indicate which Google/SIP accounts are used to call what \
-                   country/area codes, which users can use which SIP/Google accounts, how incoming \
+                   country/area codes, which users can use what SIP/Google accounts, how incoming \
                    calls are routed, what numbers can get into this PBX with a password, and what \
                    numbers are blacklisted."))
 
@@ -127,7 +127,7 @@ if     nallvalidaccounts == 0 then
 elseif nvalidoutaccounts == 0 then
    text = translate("NOTE: There are no Google or SIP provider accounts enabled for outgoing calls.")
 else
-   text = translate("If you have more than one account which can make outgoing calls, you \
+   text = translate("If you have more than one account that can make outgoing calls, you \
    should enter a list of phone numbers and prefixes in the following fields for each \
    provider listed. Invalid prefixes are removed silently, and only 0-9, X, Z, N, #, *, \
    and + are valid characters. The letter X matches 0-9, Z matches 1-9, and N matches 2-9. \
@@ -155,7 +155,7 @@ for k,v in pairs(validoutaccounts) do
       value = self.map:get(section, self.option)
       
       if value == nil then
-         return {translate("Dials any number")}
+         return {translate("Used for numbers unmatched elsewhere")}
       else
          return value
       end
@@ -184,9 +184,9 @@ if     nallvalidaccounts == 0 then
 elseif nvalidinaccounts == 0 then
    text = translate("NOTE: There are no Google or SIP provider accounts enabled for incoming calls.")
 else
-   text = translate("For each provider that receives calls, here you can restrict which users to ring \
-                on incoming calls. If the list is empty, the system will indicate that all users \
-                which are enabled for incoming calls will ring. Invalid usernames will be rejected \
+   text = translate("For each provider enabled for incoming calls, here you can restrict which users to\
+                ring on incoming calls. If the list is empty, the system will indicate that all users \
+                enabled for incoming calls will ring. Invalid usernames will be rejected \
                 silently. Also, entering a username here overrides the user's setting to not receive \
                 incoming calls. This way, you can make certain users ring only for specific providers. \
                 Entries can be made in a space-separated list, and/or one per line by hitting enter after \
@@ -236,13 +236,13 @@ if     nallvalidusers == 0 then
 elseif nvalidoutusers == 0 then
    text = translate("NOTE: There are no local user accounts enabled for outgoing calls.")
 else
-   text = translate("If you would like, you could restrict which providers users are allowed to use for \
-        outgoing calls. By default all users can use all providers. To show up in the list below the user \
-        should be allowed to make outgoing calls in the \"User Accounts\" page. Enter VoIP providers in the \
-        format username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest to copy and \
-        paste the providers from above. Invalid entries, including providers not enabled for outgoing \
-        calls, will be rejected silently. Entries can be made in a space-separated list, and/or one per \
-        line by hitting enter after every one.")
+   text = translate("For each user enabled for outgoing calls you can restrict what providers the user \
+        can use for outgoing calls. By default all users can use all providers. To show up in the list \
+        below the user should be allowed to make outgoing calls in the \"User Accounts\" page. Enter VoIP \
+        providers in the format username@some.host.name, as listed in \"Outgoing Calls\" above. It's \
+        easiest to copy and paste the providers from above. Invalid entries, including providers not \
+        enabled for outgoing calls, will be rejected silently. Entries can be made in a space-separated \
+        list, and/or one per line by hitting enter after every one.")
 end
 
 
@@ -288,7 +288,7 @@ end
 
 ----------------------------------------------------------------------------------------------------
 s = m:section(TypedSection, "callthrough_numbers", translate("Call-through Numbers"),
-        translate("Designate numbers which will be allowed to call through this system and which user's \
+        translate("Designate numbers that are allowed to call through this system and which user's \
                   privileges it will have."))
 s.anonymous = true
 s.addremove = true
@@ -335,10 +335,9 @@ end
 
 ----------------------------------------------------------------------------------------------------
 s = m:section(NamedSection, "blacklisting", "call_routing", translate("Blacklisted Numbers"),
-                 translate("Enter phone numbers that you want to decline calls from automatically. \
-                        You should probably omit the country code and any leading \
-                        zeroes, but please experiment to make sure you are blocking numbers from your \
-                        desired area successfully."))
+              translate("Enter phone numbers that you want to decline calls from automatically. \
+              You should probably omit the country code and any leading zeroes, but please \
+              experiment to make sure you are blocking numbers from your desired area successfully."))
 s.anonymous = true
 
 b = s:option(DynamicList, "blacklist1", translate("Dynamic List of Blacklisted Numbers"),
diff --git a/applications/luci-pbx/luasrc/model/cbi/pbx-google.lua b/applications/luci-pbx/luasrc/model/cbi/pbx-google.lua
index 32b3442b6f..32e203e8c0 100644
--- a/applications/luci-pbx/luasrc/model/cbi/pbx-google.lua
+++ b/applications/luci-pbx/luasrc/model/cbi/pbx-google.lua
@@ -37,7 +37,7 @@ m = Map (modulename, translate("Google Accounts"),
 
 -- Recreate the config, and restart services after changes are commited to the configuration.
 function m.on_after_commit(self)
-   -- Create a field "name" for each account which identifies the account in the backend.
+   -- Create a field "name" for each account that identifies the account in the backend.
    commit = false
    m.uci:foreach(modulename, "gtalk_jabber", 
                  function(s1)
@@ -85,7 +85,7 @@ end
 
 
 p = s:option(ListValue, "register",
-             translate("Enable Incoming Calls (See Status, Message below)"),
+             translate("Enable Incoming Calls (set Status below)"),
              translate("When somebody starts voice chat with your GTalk account or calls the GVoice, \
                        number (if you have Google Voice), the call will be forwarded to any users \
                         that are online (registered using a SIP device or softphone) and permitted to \
@@ -105,14 +105,14 @@ p:value("yes", translate("Yes"))
 p:value("no",  translate("No"))
 p.default = "yes"
 
-st = s:option(ListValue, "status", translate("Account Status"))
+st = s:option(ListValue, "status", translate("Google Talk Status"))
 st:depends("register", "yes")
 st:value("dnd", translate("Do Not Disturb"))
 st:value("away",  translate("Away"))
 st:value("available",  translate("Available"))
 st.default = defaultstatus
 
-stm = s:option(Value, "statusmessage", translate("Account Status Message"),
+stm = s:option(Value, "statusmessage", translate("Google Talk Status Message"),
              translate("Avoid using anything but alpha-numeric characters, space, comma, and period."))
 stm:depends("register", "yes")
 stm.default = defaultstatusmessage
diff --git a/applications/luci-pbx/luasrc/model/cbi/pbx-users.lua b/applications/luci-pbx/luasrc/model/cbi/pbx-users.lua
index c388967a65..c7c8b4d8bb 100644
--- a/applications/luci-pbx/luasrc/model/cbi/pbx-users.lua
+++ b/applications/luci-pbx/luasrc/model/cbi/pbx-users.lua
@@ -31,10 +31,10 @@ modulenameadvanced = "pbx-advanced"
 
         
 m = Map (modulename, translate("User Accounts"), 
-        translate("Here you must configure at least one SIP account, which you \
-                will use to register with this service. Use this account either in an analog telephony \
-                adapter (ATA), or in a SIP softphone like CSipSimple, Linphone, or Sipdroid on your \
-                Android smartphone, or X-lite or Ekiga on your computer. By default, all SIP accounts \
+        translate("Here you must configure at least one SIP account, that you \
+                will use to register with this service. Use this account either in an Analog Telephony \
+                Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid on your \
+                smartphone, or Ekiga, Linphone, or X-Lite on your computer. By default, all SIP accounts \
                 will ring simultaneously if a call is made to one of your VoIP provider accounts or GV \
                 numbers."))
 
@@ -79,11 +79,11 @@ end
 if bindport ~= nil then
         s:option(DummyValue, "bindport", translate("Port Setting for SIP Devices"),
         translatef("If setting Server/Registrar to %s or %s does not work for you, try setting \
-        it to %s or %s and entering this port number in a separate field which specifies the \
+        it to %s or %s and entering this port number in a separate field that specifies the \
         Server/Registrar port number. Beware that some devices have a confusing \
-        setting which sets the port where SIP requests originate from on the SIP \
-        device itself (bind port). The port specified on this page is NOT this bind port \
-        but the this service listens on.", 
+        setting that sets the port where SIP requests originate from on the SIP \
+        device itself (the bind port). The port specified on this page is NOT this bind port \
+        but the port this service listens on.", 
         ipaddr, externhost, just_ipaddr, just_externhost)).default = bindport
 end
 
diff --git a/applications/luci-pbx/luasrc/model/cbi/pbx-voip.lua b/applications/luci-pbx/luasrc/model/cbi/pbx-voip.lua
index 41395ae86a..ed1ed1edb1 100644
--- a/applications/luci-pbx/luasrc/model/cbi/pbx-voip.lua
+++ b/applications/luci-pbx/luasrc/model/cbi/pbx-voip.lua
@@ -36,7 +36,7 @@ m = Map (modulename, translate("SIP Accounts"),
 -- Recreate the config, and restart services after changes are commited to the configuration.
 function m.on_after_commit(self)
    commit = false
-   -- Create a field "name" for each account which identifies the account in the backend.
+   -- Create a field "name" for each account that identifies the account in the backend.
    m.uci:foreach(modulename, "voip_provider", 
                  function(s1)
                     if s1.defaultuser ~= nil and s1.host ~= nil then