Rework LuCI build system

 * Rename subdirectories to their repective OpenWrt package names
 * Make each LuCI module its own standalone package
 * Deploy a shared luci.mk which is used by each module Makefile

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

1 files changed, 0 insertions, 156 deletions

diff --git a/applications/luci-dump1090/luasrc/model/cbi/dump1090.lua b/applications/luci-dump1090/luasrc/model/cbi/dump1090.lua
deleted file mode 100644
index e9ed336c13..0000000000
--- a/applications/luci-dump1090/luasrc/model/cbi/dump1090.lua
+++ /dev/null
@@ -1,156 +0,0 @@
---[[
-LuCI - Lua Configuration Interface - dump1090 support
-
-Copyright 2014 Álvaro Fernández Rojas <noltari@gmail.com>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-	http://www.apache.org/licenses/LICENSE-2.0
-
-$Id$
-]]--
-
-m = Map("dump1090", "dump1090", translate("dump1090 is a Mode S decoder specifically designed for RTLSDR devices, here you can configure the settings."))
-
-s = m:section(TypedSection, "dump1090", "")
-s.addremove = true
-s.anonymous = false
-
-enable=s:option(Flag, "disabled", translate("Enabled"))
-enable.enabled="0"
-enable.disabled="1"
-enable.default = "1"
-enable.rmempty = false
-respawn=s:option(Flag, "respawn", translate("Respawn"))
-respawn.default = false
-
-device_index=s:option(Value, "device_index", translate("RTL device index"))
-device_index.rmempty = true
-device_index.datatype = "uinteger"
-
-gain=s:option(Value, "gain", translate("Gain (-10 for auto-gain)"))
-gain.rmempty = true
-gain.datatype = "integer"
-
-enable_agc=s:option(Flag, "enable_agc", translate("Enable automatic gain control"))
-enable_agc.default = false
-
-freq=s:option(Value, "freq", translate("Frequency"))
-freq.rmempty = true
-freq.datatype = "uinteger"
-
-ifile=s:option(Value, "ifile", translate("Data file"))
-ifile.rmempty = true
-ifile.datatype = "file"
-
-raw=s:option(Flag, "raw", translate("Show only messages hex values"))
-raw.default = false
-
-net=s:option(Flag, "net", translate("Enable networking"))
-
-modeac=s:option(Flag, "modeac", translate("Enable decoding of SSR Modes 3/A & 3/C"))
-modeac.default = false
-
-net_beast=s:option(Flag, "net_beast", translate("TCP raw output in Beast binary format"))
-net_beast.default = false
-
-net_only=s:option(Flag, "net_only", translate("Enable just networking, no RTL device or file used"))
-net_only.default = false
-
-net_bind_address=s:option(Value, "net_bind_address", translate("IP address to bind to"))
-net_bind_address.rmempty = true
-net_bind_address.datatype = "ipaddr"
-
-net_http_port=s:option(Value, "net_http_port", translate("HTTP server port"))
-net_http_port.rmempty = true
-net_http_port.datatype = "port"
-
-net_ri_port=s:option(Value, "net_ri_port", translate("TCP raw input listen port"))
-net_ri_port.rmempty = true
-net_ri_port.datatype = "port"
-
-net_ro_port=s:option(Value, "net_ro_port", translate("TCP raw output listen port"))
-net_ro_port.rmempty = true
-net_ro_port.datatype = "port"
-
-net_sbs_port=s:option(Value, "net_sbs_port", translate("TCP BaseStation output listen port"))
-net_sbs_port.rmempty = true
-net_sbs_port.datatype = "port"
-
-net_bi_port=s:option(Value, "net_bi_port", translate("TCP Beast input listen port"))
-net_bi_port.rmempty = true
-net_bi_port.datatype = "port"
-
-net_bo_port=s:option(Value, "net_bo_port", translate("TCP Beast output listen port"))
-net_bo_port.rmempty = true
-net_bo_port.datatype = "port"
-
-net_ro_size=s:option(Value, "net_ro_size", translate("TCP raw output minimum size"))
-net_ro_size.rmempty = true
-net_ro_size.datatype = "uinteger"
-
-net_ro_rate=s:option(Value, "net_ro_rate", translate("TCP raw output memory flush rate"))
-net_ro_rate.rmempty = true
-net_ro_rate.datatype = "uinteger"
-
-net_heartbeat=s:option(Value, "net_heartbeat", translate("TCP heartbeat rate in seconds"))
-net_heartbeat.rmempty = true
-net_heartbeat.datatype = "uinteger"
-
-net_buffer=s:option(Value, "net_buffer", translate("TCP buffer size 64Kb * (2^n)"))
-net_buffer.rmempty = true
-net_buffer.datatype = "uinteger"
-
-lat=s:option(Value, "lat", translate("Reference/receiver latitude for surface posn"))
-lat.rmempty = true
-lat.datatype = "integer"
-
-lon=s:option(Value, "lon", translate("Reference/receiver longitude for surface posn"))
-lon.rmempty = true
-lon.datatype = "integer"
-
-fix=s:option(Flag, "fix", translate("Enable single-bits error correction using CRC"))
-fix.default = false
-
-no_fix=s:option(Flag, "no_fix", translate("Disable single-bits error correction using CRC"))
-no_fix.default = false
-
-no_crc_check=s:option(Flag, "no_crc_check", translate("Disable messages with broken CRC"))
-no_crc_check.default = false
-
-phase_enhance=s:option(Flag, "phase_enhance", translate("Enable phase enhancement"))
-phase_enhance.default = false
-
-agressive=s:option(Flag, "agressive", translate("More CPU for more messages"))
-agressive.default = false
-
-mlat=s:option(Flag, "mlat", translate("Display raw messages in Beast ascii mode"))
-mlat.default = false
-
-stats=s:option(Flag, "stats", translate("Print stats at exit"))
-stats.default = false
-
-stats_every=s:option(Value, "stats_every", translate("Show and reset stats every seconds"))
-stats_every.rmempty = true
-stats_every.datatype = "uinteger"
-
-onlyaddr=s:option(Flag, "onlyaddr", translate("Show only ICAO addresses"))
-onlyaddr.default = false
-
-metric=s:option(Flag, "metric", translate("Use metric units"))
-metric.default = false
-
-snip=s:option(Flag, "snip", translate("Strip IQ file removing samples"))
-snip.rmempty = true
-snip.datatype = "uinteger"
-
-debug_mode=s:option(Flag, "debug", translate("Debug mode flags"))
-debug_mode.rmempty = true
-
-ppm=s:option(Flag, "ppm", translate("Set receiver error in parts per million"))
-ppm.rmempty = true
-ppm.datatype = "uinteger"
-
-return m