* luci/app/chillispot: rename to coovachilli

8 files changed, 0 insertions, 871 deletions

diff --git a/applications/luci-chillispot/Makefile b/applications/luci-chillispot/Makefile
deleted file mode 100644
index 81a96f6a83..0000000000
--- a/applications/luci-chillispot/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-include ../../build/config.mk
-include ../../build/module.mk
\ No newline at end of file
diff --git a/applications/luci-chillispot/luasrc/controller/chillispot.lua b/applications/luci-chillispot/luasrc/controller/chillispot.lua
deleted file mode 100644
index 4cb9797b27..0000000000
--- a/applications/luci-chillispot/luasrc/controller/chillispot.lua
+++ /dev/null
@@ -1,26 +0,0 @@
---[[
-LuCI - Lua Configuration Interface
-
-Copyright 2008 Steven Barth <steven@midlink.org>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-	http://www.apache.org/licenses/LICENSE-2.0
-
-$Id$
-]]--
-module("luci.controller.chillispot", package.seeall)
-
-function index()
-
-	require("luci.i18n")
-	local i18n = luci.i18n.translate
-
-	entry( { "admin", "services", "chillispot" },            cbi("chillispot"),         i18n("chillispot",         "ChilliSpot"),                 90)
-	entry( { "admin", "services", "chillispot", "network" }, cbi("chillispot_network"), i18n("chillispot_network", "Network Configuration"),      10)
-	entry( { "admin", "services", "chillispot", "radius"  }, cbi("chillispot_radius"),  i18n("chillispot_radius",  "Radius Configuration"),       20)
-	entry( { "admin", "services", "chillispot", "auth"    }, cbi("chillispot_auth"),    i18n("chillispot_auth",    "UAM and MAC Authentication"), 30)
-
-end
diff --git a/applications/luci-chillispot/luasrc/model/cbi/chillispot.lua b/applications/luci-chillispot/luasrc/model/cbi/chillispot.lua
deleted file mode 100644
index 48ec797f16..0000000000
--- a/applications/luci-chillispot/luasrc/model/cbi/chillispot.lua
+++ /dev/null
@@ -1,38 +0,0 @@
---[[
-LuCI - Lua Configuration Interface
-
-Copyright 2008 Steven Barth <steven@midlink.org>
-Copyright 2008 Jo-Philipp Wich <xm@leipzig.freifunk.net>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-	http://www.apache.org/licenses/LICENSE-2.0
-
-$Id$
-]]--
-
-
-m = Map("chillispot")
-
--- general
-s1 = m:section(TypedSection, "general")
-s1.anonymous = true
-
-s1:option( Flag, "debug" )
-s1:option( Value, "interval" )
-s1:option( Value, "pidfile" ).optional = true
-s1:option( Value, "statedir" ).optional = true
-s1:option( Value, "cmdsock" ).optional = true
-s1:option( Value, "logfacility" ).optional = true
-
--- remote config management
-s2 = m:section(TypedSection, "remoteconfig")
-s2.anonymous = true
-
-s2:option( Value, "confusername" )
-s2:option( Value, "confpassword" )
-
-
-return m
diff --git a/applications/luci-chillispot/luasrc/model/cbi/chillispot_auth.lua b/applications/luci-chillispot/luasrc/model/cbi/chillispot_auth.lua
deleted file mode 100644
index 8f033f070e..0000000000
--- a/applications/luci-chillispot/luasrc/model/cbi/chillispot_auth.lua
+++ /dev/null
@@ -1,76 +0,0 @@
---[[
-LuCI - Lua Configuration Interface
-
-Copyright 2008 Steven Barth <steven@midlink.org>
-Copyright 2008 Jo-Philipp Wich <xm@leipzig.freifunk.net>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-	http://www.apache.org/licenses/LICENSE-2.0
-
-$Id$
-]]--
-
-
-m = Map("chillispot")
-
--- uam config
-s1 = m:section(TypedSection, "uam")
-s1.anonymous = true
-
-s1:option( Value, "uamserver" )
-s1:option( Value, "uamsecret" ).password = true
-
-s1:option( Flag, "uamanyip" )
-s1:option( Flag, "uamanydns" )
-s1:option( Flag, "dnsparanoia" )
-s1:option( Flag, "nouamsuccess" )
-s1:option( Flag, "nouamwispr" )
-s1:option( Flag, "usestatusfile" )
-s1:option( Flag, "chillixml" )
-
-s1:option( Value, "uamhomepage" ).optional = true
-s1:option( Value, "uamlisten" ).optional = true
-s1:option( Value, "uamport" ).optional = true
-s1:option( Value, "uamiport" ).optional = true
-s1:option( Value, "uamdomain" ).optional = true
-s1:option( Value, "uamlogoutip" ).optional = true
-s1:option( DynamicList, "uamallowed" ).optional = true
-s1:option( Value, "uamui" ).optional = true
-
-s1:option( Value, "wisprlogin" ).optional = true
-
-s1:option( Value, "defsessiontimeout" ).optional = true
-s1:option( Value, "defidletimeout" ).optional = true
-s1:option( Value, "definteriminterval" ).optional = true
-
-s1:option( Value, "ssid" ).optional = true
-s1:option( Value, "vlan" ).optional = true
-s1:option( Value, "nasip" ).optional = true
-s1:option( Value, "nasmac" ).optional = true
-s1:option( Value, "wwwdir" ).optional = true
-s1:option( Value, "wwwbin" ).optional = true
-
-s1:option( Value, "localusers" ).optional = true
-s1:option( Value, "postauthproxy" ).optional = true
-s1:option( Value, "postauthproxyport" ).optional = true
-s1:option( Value, "locationname" ).optional = true
-
-
--- mac authentication
-s2 = m:section(TypedSection, "macauth")
-s2.anonymous = true
-
-s2:option( Flag, "macauth" )
-s2:option( Flag, "macallowlocal" )
-s2:option( DynamicList, "macallowed" )
-
-pw = s2:option( Value, "macpasswd" )
-pw.optional = true
-pw.password = true
-
-s2:option( Value, "macsuffix" ).optional = true
-
-return m
diff --git a/applications/luci-chillispot/luasrc/model/cbi/chillispot_network.lua b/applications/luci-chillispot/luasrc/model/cbi/chillispot_network.lua
deleted file mode 100644
index e26f32e1a3..0000000000
--- a/applications/luci-chillispot/luasrc/model/cbi/chillispot_network.lua
+++ /dev/null
@@ -1,71 +0,0 @@
---[[
-LuCI - Lua Configuration Interface
-
-Copyright 2008 Steven Barth <steven@midlink.org>
-Copyright 2008 Jo-Philipp Wich <xm@leipzig.freifunk.net>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-	http://www.apache.org/licenses/LICENSE-2.0
-
-$Id$
-]]--
-
-require("luci.sys")
-require("luci.ip")
-
-m = Map("chillispot")
-
--- tun
-s1 = m:section(TypedSection, "tun")
-s1.anonymous = true
-
-s1:option( Flag, "usetap" )
-s1:option( Value, "tundev" ).optional = true
-s1:option( Value, "txqlen" ).optional = true
-
-net = s1:option( Value, "net" )
-for _, route in ipairs(luci.sys.net.routes()) do
-	if route.Iface ~= "lo" and route.Mask ~= "FFFFFFFF" then
-		local netmask = luci.ip.IPv4(route.Mask)
-		if netmask then
-			local netaddr = luci.ip.IPv4(route.Destination, netmask)
-			if netaddr then
-				net:value( netaddr:string() )
-			end
-		end
-	end
-end
-
-s1:option( Value, "dynip" ).optional = true
-s1:option( Value, "statip" ).optional = true
-
-s1:option( Value, "dns1" ).optional = true
-s1:option( Value, "dns2" ).optional = true
-s1:option( Value, "domain" ).optional = true
-
-s1:option( Value, "ipup" ).optional = true
-s1:option( Value, "ipdown" ).optional = true
-
-s1:option( Value, "conup" ).optional = true
-s1:option( Value, "condown" ).optional = true
-
-
--- dhcp config
-s2 = m:section(TypedSection, "dhcp")
-s2.anonymous = true
-
-dif = s2:option( Value, "dhcpif" )
-for _, nif in ipairs(luci.sys.net.devices()) do
-	if nif ~= "lo" then dif:value(nif) end
-end
-
-s2:option( Value, "dhcpmac" ).optional = true
-s2:option( Value, "lease" ).optional = true
-s2:option( Value, "dhcpstart" ).optional = true
-s2:option( Value, "dhcpend" ).optional = true
-
-
-return m
diff --git a/applications/luci-chillispot/luasrc/model/cbi/chillispot_radius.lua b/applications/luci-chillispot/luasrc/model/cbi/chillispot_radius.lua
deleted file mode 100644
index 568c92f833..0000000000
--- a/applications/luci-chillispot/luasrc/model/cbi/chillispot_radius.lua
+++ /dev/null
@@ -1,69 +0,0 @@
---[[
-LuCI - Lua Configuration Interface
-
-Copyright 2008 Steven Barth <steven@midlink.org>
-Copyright 2008 Jo-Philipp Wich <xm@leipzig.freifunk.net>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-	http://www.apache.org/licenses/LICENSE-2.0
-
-$Id$
-]]--
-
-
-m = Map("chillispot")
-
--- radius server
-s1 = m:section(TypedSection, "radius")
-s1.anonymous = true
-
-s1:option( Value, "radiusserver1" )
-s1:option( Value, "radiusserver2" )
-s1:option( Value, "radiussecret" ).password = true
-
-s1:option( Value, "radiuslisten" ).optional = true
-s1:option( Value, "radiusauthport" ).optional = true
-s1:option( Value, "radiusacctport" ).optional = true
-
-s1:option( Value, "radiusnasid" ).optional = true
-s1:option( Value, "radiusnasip" ).optional = true
-
-s1:option( Value, "radiuscalled" ).optional = true
-s1:option( Value, "radiuslocationid" ).optional = true
-s1:option( Value, "radiuslocationname" ).optional = true
-
-s1:option( Value, "radiusnasporttype" ).optional = true
-
-s1:option( Flag, "radiusoriginalurl" )
-
-s1:option( Value, "adminuser" ).optional = true
-rs = s1:option( Value, "adminpassword" )
-rs.optional = true
-rs.password = true
-
-s1:option( Flag, "swapoctets" )
-s1:option( Flag, "openidauth" )
-s1:option( Flag, "wpaguests" )
-s1:option( Flag, "acctupdate" )
-
-s1:option( Value, "coaport" ).optional = true
-s1:option( Flag, "coanoipcheck" )
-
-s1:option( Flag, "eapolenable" ).optional = true
-
-
--- radius proxy
-s2 = m:section(TypedSection, "proxy")
-s2.anonymous = true
-
-s2:option( Value, "proxylisten" ).optional = true
-s2:option( Value, "proxyport" ).optional = true
-s2:option( Value, "proxyclient" ).optional = true
-ps = s2:option( Value, "proxysecret" )
-ps.optional = true
-ps.password = true
-
-return m
diff --git a/applications/luci-chillispot/root/etc/config/chillispot b/applications/luci-chillispot/root/etc/config/chillispot
deleted file mode 100644
index fbbe22bc62..0000000000
--- a/applications/luci-chillispot/root/etc/config/chillispot
+++ /dev/null
@@ -1,259 +0,0 @@
-##############################################################################
-#
-# Sample ChilliSpot configuration file
-#
-##############################################################################
-
-# General settings
-config general
-
-	# Enable this flag to include debug information.
-	option debug	0
-
-	# Re-read configuration file at this interval. Will also cause new domain
-	# name lookups to be performed. Value is given in seconds.
-	option interval	3600
-
-	# File to store information about the process id of the program.
-	# The program must have write access to this file/directory.
-	option pidfile	/var/run/chilli.pid
-
-	# Directory to use for nonvolatile storage.
-	# The program must have write access to this directory.
-	# This tag is currently ignored
-	#option	statedir	./
-
-
-# Remote configuration management
-config remoteconfig
-
-	# If confusername is specified together with confpassword chillispot
-	# will at regular intervals specified by the interval option query the
-	# radius server for configuration information.
-	# Normally you do not need to uncomment this tag.
-	option confusername	""
-
-	# If confusername is specified together with confpassword chillispot
-	# will at regular intervals specified by the interval option query the
-	# radius server for configuration information.
-	# Normally you do not need to uncomment this tag.
-	option confpassword	""
-
-
-# TUN parameters
-config tun
-
-	# IP network address of external packet data network
-	# Used to allocate dynamic IP addresses and set up routing.
-	# Normally you do not need to uncomment this tag.
-	option net	192.168.182.0/24
-
-	# Dynamic IP address pool
-	# Used to allocate dynamic IP addresses to clients.
-	# If not set it defaults to the net tag.
-	# Do not uncomment this tag unless you are an experienced user!
-	#option	dynip	192.168.182.0/24
-
-	# Static IP address pool
-	# Used to allocate static IP addresses to clients.
-	# Do not uncomment this tag unless you are an experienced user!
-	#option	statip	192.168.182.0/24
-
-	# Primary DNS server.
-	# Will be suggested to the client.
-	# If omitted the system default will be used.
-	# Normally you do not need to uncomment this tag.
-	#option	dns1	172.16.0.5
-
-	# Secondary DNS server.
-	# Will be suggested to the client.
-	# If omitted the system default will be used.
-	# Normally you do not need to uncomment this tag.
-	#option	dns2	172.16.0.6
-
-	# Domain name
-	# Will be suggested to the client.
-	# Normally you do not need to uncomment this tag.
-	option domain	key.chillispot.org
-
-	# Script executed after network interface has been brought up.
-	# Executed with the following parameters: <devicename> <ip address> <mask>
-	# Normally you do not need to uncomment this tag.
-	#option	ipup	/etc/chilli.ipup
-
-	# Script executed after network interface has been taken down.
-	# Executed with the following parameters: <devicename> <ip address> <mask>
-	# Normally you do not need to uncomment this tag.
-	#option	ipdown	/etc/chilli.ipdown
-
-	# Script executed after a user has been authenticated.
-	# Executed with the following parameters: <devicename> <ip address>
-	# <mask> <user ip address> <user mac address> <filter ID>
-	# Normally you do not need to uncomment this tag.
-	#option	conup	/etc/chilli.conup
-
-	# Script executed after a user has disconnected.
-	# Executed with the following parameters: <devicename> <ip address>
-	# <mask> <user ip address> <user mac address> <filter ID>
-	# Normally you do not need to uncomment this tag.
-	#option	condown	/etc/chilli.condown
-
-
-# DHCP Parameters
-config dhcp
-
-	# Ethernet interface to listen to.
-	# This is the network interface which is connected to the access points.
-	# In a typical configuration this tag should be set to eth1.
-	option dhcpif	eth1
-
-	# Use specified MAC address.
-	# An address in the range  00:00:5E:00:02:00 - 00:00:5E:FF:FF:FF falls
-	# within the IANA range of addresses and is not allocated for other
-	# purposes.
-	# Normally you do not need to uncomment this tag.
-	#option dhcpmac	00:00:5E:00:02:00
-
-	# Time before DHCP lease expires
-	# Normally you do not need to uncomment this tag.
-	#option lease	600
-
-
-# Radius parameters
-config radius
-
-	# IP address to listen to
-	# Normally you do not need to uncomment this tag.
-	#option radiuslisten	127.0.0.1
-
-	# IP address of radius server 1
-	# For most installations you need to modify this tag.
-	option radiusserver1	rad01.chillispot.org
-
-	# IP address of radius server 2
-	# If you have only one radius server you should set radiusserver2 to the
-	# same value as radiusserver1.
-	# For most installations you need to modify this tag.
-	option radiusserver2	rad02.chillispot.org
-
-	# Radius authentication port
-	# The UDP port number to use for radius authentication requests.
-	# The same port number is used for both radiusserver1 and radiusserver2.
-	# Normally you do not need to uncomment this tag.
-	#option radiusauthport	1812
-
-	# Radius accounting port
-	# The UDP port number to use for radius accounting requests.
-	# The same port number is used for both radiusserver1 and radiusserver2.
-	# Normally you do not need to uncomment this tag.
-	#option radiusacctport	1813
-
-	# Radius shared secret for both servers
-	# For all installations you should modify this tag.
-	#option radiussecret	testing123
-
-	# Radius NAS-Identifier
-	# Normally you do not need to uncomment this tag.
-	#option radiusnasid	nas01
-
-	# Radius NAS-IP-Address
-	# Normally you do not need to uncomment this tag.
-	#option radiusnasip	127.0.0.1
-
-	# Radius Called-Station-ID
-	# Normally you do not need to uncomment this tag.
-	#option radiuscalled	00133300
-
-	# WISPr Location ID. Should be in the format: isocc=<ISO_Country_Code>,
-	# cc=<E.164_Country_Code>,ac=<E.164_Area_Code>,network=<ssid/ZONE>
-	# Normally you do not need to uncomment this tag.
-	#option radiuslocationid	isocc=us,cc=1,ac=408,network=ACMEWISP_NewarkAirport
-
-	# WISPr Location Name. Should be in the format:
-	# <HOTSPOT_OPERATOR_NAME>,<LOCATION>
-	# Normally you do not need to uncomment this tag.
-	#option radiuslocationname	ACMEWISP,Gate_14_Terminal_C_of_Newark_Airport
-
-
-# Radius proxy parameters
-config proxy
-
-	# IP address to listen to
-	# Normally you do not need to uncomment this tag.
-	#option proxylisten	10.0.0.1
-
-	# UDP port to listen to.
-	# If not specified a port will be selected by the system
-	# Normally you do not need to uncomment this tag.
-	#option proxyport	1645
-
-	# Client(s) from which we accept radius requests
-	# Normally you do not need to uncomment this tag.
-	#option proxyclient	10.0.0.1/24
-
-	# Radius proxy shared secret for all clients
-	# If not specified defaults to radiussecret
-	# Normally you do not need to uncomment this tag.
-	#option proxysecret	testing123
-
-
-# Universal access method (UAM) parameters
-config uam
-
-	# URL of web server handling authentication.
-	option uamserver	https://radius.chillispot.org/hotspotlogin
-
-	# URL of welcome homepage.
-	# Unauthenticated users will be redirected to this URL. If not specified
-	# users will be redirected to the uamserver instead.
-	# Normally you do not need to uncomment this tag.
-	#option uamhomepage	http://192.168.182.1/welcome.html
-
-	# Shared between chilli and authentication web server
-	#option uamsecret	ht2eb8ej6s4et3rg1ulp
-
-	# IP address to listen to for authentication requests
-	# Do not uncomment this tag unless you are an experienced user!
-	#option uamlisten	192.168.182.1
-
-	# TCP port to listen to for authentication requests
-	# Do not uncomment this tag unless you are an experienced user!
-	#option uamport	3990
-
-	# Comma separated list of domain names, IP addresses or network segments
-	# the client can access without first authenticating.
-	# It is possible to specify this tag multiple times.
-	# Normally you do not need to uncomment this tag.
-	#list uamallowed	www.chillispot.org
-	#list uamallowed	10.11.12.0/24
-
-	# If this flag is given unauthenticated users are allowed to use
-	# any DNS server.
-	# Normally you do not need to uncomment this tag.
-	#uamanydns
-
-
-# MAC authentication
-config macauth
-
-	# If this flag is given users will be authenticated only on their MAC
-	# address.
-	# Normally you do not need to enable this flag.
-	option macauth	0
-
-	# List of MAC addresses.
-	# The MAC addresses specified in this list will be authenticated only on
-	# their MAC address.
-	# This tag is ignored if the macauth tag is given.
-	# It is possible to specify this tag multiple times.
-	# Normally you do not need to uncomment this tag.
-	#list macallowed	00-0A-5E-AC-BE-51
-	#list macallowed	00-30-1B-3C-32-E9
-
-	# Password to use for MAC authentication.
-	# Normally you do not need to uncomment this tag.
-	#option macpasswd	password
-
-	# Suffix to add to MAC address in order to form the username.
-	# Normally you do not need to uncomment this tag.
-	#option macsuffix	suffix
diff --git a/applications/luci-chillispot/root/lib/uci/schema/default/chillispot b/applications/luci-chillispot/root/lib/uci/schema/default/chillispot
deleted file mode 100644
index a3c613bc8e..0000000000
--- a/applications/luci-chillispot/root/lib/uci/schema/default/chillispot
+++ /dev/null
@@ -1,330 +0,0 @@
-package chillispot
-
-config section
-	option name	'general'
-	option title	'Section general'
-	option package	'chillispot'
-	option unique	true
-	option required	true
-
-config variable
-	option name	'debug'
-	option title	'Option debug'
-	option section	'chillispot.general'
-	option datatype	'boolean'
-
-config variable
-	option name	'interval'
-	option title	'Option interval'
-	option section	'chillispot.general'
-	option datatype	'uint'
-
-config variable
-	option name	'pidfile'
-	option title	'Option pidfile'
-	option section	'chillispot.general'
-	option datatype	'string'
-
-config variable
-	option name	'statedir'
-	option title	'Option statedir'
-	option section	'chillispot.general'
-	option datatype	'directory'
-
-
-config section
-	option name	'tun'
-	option title	'Section tun'
-	option package	'chillispot'
-	option unique	true
-	option required	true
-
-config variable
-	option name	'net'
-	option title	'Option net'
-	option section	'chillispot.tun'
-	option datatype	'ip4addr'
-
-config variable
-	option name	'statip'
-	option title	'Option statip'
-	option section	'chillispot.tun'
-	option datatype	'ip4addr'
-
-config variable
-	option name	'dynip'
-	option title	'Option dynip'
-	option section	'chillispot.tun'
-	option datatype	'ip4addr'
-
-config variable
-	option name	'dns1'
-	option title	'Option dns1'
-	option section	'chillispot.tun'
-	option datatype	'ip4addr'
-
-config variable
-	option name	'dns2'
-	option title	'Option dns2'
-	option section	'chillispot.tun'
-	option datatype	'ip4addr'
-
-config variable
-	option name	'domain'
-	option title	'Option domain'
-	option section	'chillispot.tun'
-	option datatype	'string'
-
-config variable
-	option name	'ipdown'
-	option title	'Option ipdown'
-	option section	'chillispot.tun'
-	option datatype	'file'
-
-config variable
-	option name	'ipup'
-	option title	'Option ipup'
-	option section	'chillispot.tun'
-	option datatype	'file'
-
-config variable
-	option name	'condown'
-	option title	'Option condown'
-	option section	'chillispot.tun'
-	option datatype	'file'
-
-config variable
-	option name	'conup'
-	option title	'Option conup'
-	option section	'chillispot.tun'
-	option datatype	'file'
-
-
-config section
-	option name	'dhcp'
-	option title	'Section dhcp'
-	option package	'chillispot'
-	option unique	true
-	option required	true
-
-config variable
-	option name	'dhcpif'
-	option title	'Option dhcpif'
-	option section	'chillispot.dhcp'
-	option datatype	'string'
-
-config variable
-	option name	'dhcpmac'
-	option title	'Option dhcpmac'
-	option section	'chillispot.dhcp'
-	option datatype	'macaddr'
-
-config variable
-	option name	'lease'
-	option title	'Option lease'
-	option section	'chillispot.dhcp'
-	option datatype	'uint'
-
-
-config section
-	option name	'macauth'
-	option title	'Section macauth'
-	option package	'chillispot'
-	option unique	true
-	option required	true
-
-config variable
-	option name	'macauth'
-	option title	'Option macauth'
-	option section	'chillispot.macauth'
-	option datatype	'boolean'
-
-config variable
-	option name	'macallowed'
-	option title	'Option macallowed'
-	option section	'chillispot.macauth'
-	option datatype	'string'
-	option type	'lazylist'
-
-config variable
-	option name	'macpasswd'
-	option title	'Option macpasswd'
-	option section	'chillispot.macauth'
-	option datatype	'string'
-
-config variable
-	option name	'macsuffix'
-	option title	'Option macsuffix'
-	option section	'chillispot.macauth'
-	option datatype	'string'
-
-
-config section
-	option name	'radius'
-	option title	'Section radius'
-	option package	'chillispot'
-	option unique	true
-	option required	true
-
-config variable
-	option name	'radiusacctport'
-	option title	'Option radiusacctport'
-	option section	'chillispot.radius'
-	option datatype	'port'
-
-config variable
-	option name	'radiusauthport'
-	option title	'Option radiusauthport'
-	option section	'chillispot.radius'
-	option datatype	'port'
-
-config variable
-	option name	'radiuscalled'
-	option title	'Option radiuscalled'
-	option section	'chillispot.radius'
-	option datatype	'string'
-
-config variable
-	option name	'radiuslisten'
-	option title	'Option radiuslisten'
-	option section	'chillispot.radius'
-	option datatype	'ip4addr'
-
-config variable
-	option name	'radiuslocationid'
-	option title	'Option radiuslocationid'
-	option section	'chillispot.radius'
-	option datatype	'string'
-
-config variable
-	option name	'radiuslocationname'
-	option title	'Option radiuslocationname'
-	option section	'chillispot.radius'
-	option datatype	'string'
-
-config variable
-	option name	'radiusnasid'
-	option title	'Option radiusnasid'
-	option section	'chillispot.radius'
-	option datatype	'string'
-
-config variable
-	option name	'radiusnasip'
-	option title	'Option radiusnasip'
-	option section	'chillispot.radius'
-	option datatype	'ip4addr'
-
-config variable
-	option name	'radiussecret'
-	option title	'Option radiussecret'
-	option section	'chillispot.radius'
-	option datatype	'string'
-
-config variable
-	option name	'radiusserver1'
-	option title	'Option radiusserver1'
-	option section	'chillispot.radius'
-	option datatype	'host'
-
-config variable
-	option name	'radiusserver2'
-	option title	'Option radiusserver2'
-	option section	'chillispot.radius'
-	option datatype	'host'
-
-
-config section
-	option name	'proxy'
-	option title	'Section proxy'
-	option package	'chillispot'
-	option unique	true
-	option required	true
-
-config variable
-	option name	'proxyclient'
-	option title	'Option proxyclient'
-	option section	'chillispot.proxy'
-	option datatype	'ip4addr'
-
-config variable
-	option name	'proxylisten'
-	option title	'Option proxylisten'
-	option section	'chillispot.proxy'
-	option datatype	'ip4addr'
-
-config variable
-	option name	'proxyport'
-	option title	'Option proxyport'
-	option section	'chillispot.proxy'
-	option datatype	'port'
-
-config variable
-	option name	'proxysecret'
-	option title	'Option proxysecret'
-	option section	'chillispot.proxy'
-	option datatype	'string'
-
-
-config section
-	option name	'remoteconfig'
-	option title	'Section remoteconfig'
-	option package	'chillispot'
-	option unique	true
-	option required	true
-
-config variable
-	option name	'confpassword'
-	option title	'Option confpassword'
-	option section	'chillispot.remoteconfig'
-	option datatype	'string'
-
-config variable
-	option name	'confusername'
-	option title	'Option confusername'
-	option section	'chillispot.remoteconfig'
-	option datatype	'string'
-
-
-config section
-	option name	'uam'
-	option title	'Section uam'
-	option package	'chillispot'
-	option unique	true
-	option required	true
-
-config variable
-	option name	'uamallowed'
-	option title	'Option uamallowed'
-	option section	'chillispot.uam'
-	option datatype	'host'
-	option type	'list'
-
-config variable
-	option name	'uamhomepage'
-	option title	'Option uamhomepage'
-	option section	'chillispot.uam'
-	option datatype	'string'
-
-config variable
-	option name	'uamlisten'
-	option title	'Option uamlisten'
-	option section	'chillispot.uam'
-	option datatype	'ip4addr'
-
-config variable
-	option name	'uamport'
-	option title	'Option uamport'
-	option section	'chillispot.uam'
-	option datatype	'port'
-
-config variable
-	option name	'uamsecret'
-	option title	'Option uamsecret'
-	option section	'chillispot.uam'
-	option datatype	'string'
-
-config variable
-	option name	'uamserver'
-	option title	'Option uamserver'
-	option section	'chillispot.uam'
-	option datatype	'string'