Rework LuCI build system

 * Rename subdirectories to their repective OpenWrt package names
 * Make each LuCI module its own standalone package
 * Deploy a shared luci.mk which is used by each module Makefile

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

1 files changed, 401 insertions, 0 deletions

diff --git a/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua b/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua
new file mode 100644
index 000000000..2b8d60cd1
--- /dev/null
+++ b/applications/luci-app-olsr/luasrc/model/cbi/olsr/olsrd6.lua
@@ -0,0 +1,401 @@
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright 2008 Steven Barth <steven@midlink.org>
+Copyright 2010 Jo-Philipp Wich <xm@subsignal.org>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+	http://www.apache.org/licenses/LICENSE-2.0
+
+$Id$
+]]--
+
+require("luci.tools.webadmin")
+local fs  = require "nixio.fs"
+local util = require "luci.util"
+local ip = require "luci.ip"
+
+local has_ipip  = fs.glob("/etc/modules.d/[0-9]*-ipip")()
+
+m = Map("olsrd6", translate("OLSR Daemon"),
+        translate("The OLSR daemon is an implementation of the Optimized Link State Routing protocol. "..
+	"As such it allows mesh routing for any network equipment. "..
+	"It runs on any wifi card that supports ad-hoc mode and of course on any ethernet device. "..
+	"Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and documentation."))
+
+function m.on_parse()
+	local has_defaults = false
+
+	m.uci:foreach("olsrd6", "InterfaceDefaults",
+		function(s)
+			has_defaults = true
+			return false
+		end)
+
+	if not has_defaults then
+		m.uci:section("olsrd6", "InterfaceDefaults")
+	end
+end
+
+function write_float(self, section, value)
+    local n = tonumber(value)
+    if n ~= nil then
+        return Value.write(self, section, "%.1f" % n) 
+    end
+end
+
+s = m:section(TypedSection, "olsrd6", translate("General settings"))
+s.anonymous = true
+
+s:tab("general",  translate("General Settings"))
+s:tab("lquality", translate("Link Quality Settings"))
+s:tab("smartgw", translate("SmartGW"), not has_ipip and translate("Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not work, please install it."))
+s:tab("advanced", translate("Advanced Settings"))
+
+poll = s:taboption("advanced", Value, "Pollrate", translate("Pollrate"),
+	translate("Polling rate for OLSR sockets in seconds. Default is 0.05."))
+poll.optional = true
+poll.datatype = "ufloat"
+poll.placeholder = "0.05"
+
+nicc = s:taboption("advanced", Value, "NicChgsPollInt", translate("Nic changes poll interval"),
+	translate("Interval to poll network interfaces for configuration changes (in seconds). Default is \"2.5\"."))
+nicc.optional = true
+nicc.datatype = "ufloat"
+nicc.placeholder = "2.5"
+
+tos = s:taboption("advanced", Value, "TosValue", translate("TOS value"),
+	translate("Type of service value for the IP header of control traffic. Default is \"16\"."))
+tos.optional = true
+tos.datatype = "uinteger"
+tos.placeholder = "16"
+
+fib = s:taboption("general", ListValue, "FIBMetric", translate("FIB metric"),
+	translate ("FIBMetric controls the metric value of the host-routes OLSRd sets. "..
+	"\"flat\" means that the metric value is always 2. This is the preferred value "..
+	"because it helps the linux kernel routing to clean up older routes. "..
+	"\"correct\" uses the hopcount as the metric value. "..
+	"\"approx\" use the hopcount as the metric value too, but does only update the hopcount if the nexthop changes too. "..
+	"Default is \"flat\"."))
+fib:value("flat")
+fib:value("correct")
+fib:value("approx")
+
+lql = s:taboption("lquality", ListValue, "LinkQualityLevel", translate("LQ level"),
+	translate("Link quality level switch between hopcount and cost-based (mostly ETX) routing.<br />"..
+	"<b>0</b> = do not use link quality<br />"..
+	"<b>2</b> = use link quality for MPR selection and routing<br />"..
+	"Default is \"2\""))
+lql:value("2")
+lql:value("0")
+
+lqage = s:taboption("lquality", Value, "LinkQualityAging", translate("LQ aging"),
+	translate("Link quality aging factor (only for lq level 2). Tuning parameter for etx_float and etx_fpm, smaller values "..
+	"mean slower changes of ETX value. (allowed values are between 0.01 and 1.0)"))
+lqage.optional = true
+lqage:depends("LinkQualityLevel", "2")
+
+lqa = s:taboption("lquality", ListValue, "LinkQualityAlgorithm", translate("LQ algorithm"),
+	translate("Link quality algorithm (only for lq level 2).<br />"..
+	"<b>etx_float</b>: floating point ETX with exponential aging<br />"..
+	"<b>etx_fpm</b>  : same as etx_float, but with integer arithmetic<br />"..
+	"<b>etx_ff</b>   : ETX freifunk, an etx variant which use all OLSR traffic (instead of only hellos) for ETX calculation<br />"..
+	"<b>etx_ffeth</b>: incompatible variant of etx_ff that allows ethernet links with ETX 0.1.<br />"..
+	"Defaults to \"etx_ff\""))
+lqa.optional = true
+lqa:value("etx_ff")
+lqa:value("etx_fpm")
+lqa:value("etx_float")
+lqa:value("etx_ffeth")
+lqa:depends("LinkQualityLevel", "2")
+lqa.optional = true
+
+lqfish = s:taboption("lquality", Flag, "LinkQualityFishEye", translate("LQ fisheye"),
+	translate("Fisheye mechanism for TCs (checked means on). Default is \"on\""))
+lqfish.default = "1"
+lqfish.optional = true
+
+hyst = s:taboption("lquality", Flag, "UseHysteresis", translate("Use hysteresis"),
+	translate("Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more robustness to the link sensing "..
+	"but delays neighbor registration. Defaults is \"yes\""))
+hyst.default = "yes"
+hyst.enabled = "yes"
+hyst.disabled = "no"
+hyst:depends("LinkQualityLevel", "0")
+hyst.optional = true
+hyst.rmempty = true
+
+port = s:taboption("general", Value, "OlsrPort", translate("Port"),
+        translate("The port OLSR uses. This should usually stay at the IANA assigned port 698. It can have a value between 1 and 65535."))
+port.optional = true
+port.default = "698"
+port.rmempty = true
+
+mainip = s:taboption("general", Value, "MainIp", translate("Main IP"),
+        translate("Sets the main IP (originator ip) of the router. This IP will NEVER change during the uptime of olsrd. "..
+	"Default is ::, which triggers usage of the IP of the first interface."))
+mainip.optional = true
+mainip.rmempty = true
+mainip.datatype = "ipaddr"
+mainip.placeholder = "::"
+
+sgw = s:taboption("smartgw", Flag, "SmartGateway", translate("Enable"), translate("Enable SmartGateway. If it is disabled, then " ..
+	"all other SmartGateway parameters are ignored. Default is \"no\"."))
+sgw.default="no"
+sgw.enabled="yes"
+sgw.disabled="no"
+sgw.rmempty = true
+
+sgwnat = s:taboption("smartgw", Flag, "SmartGatewayAllowNAT", translate("Allow gateways with NAT"), translate("Allow the selection of an outgoing ipv4 gateway with NAT"))
+sgwnat:depends("SmartGateway", "yes")
+sgwnat.default="yes"
+sgwnat.enabled="yes"
+sgwnat.disabled="no"
+sgwnat.optional = true
+sgwnat.rmempty = true
+
+sgwuplink = s:taboption("smartgw", ListValue, "SmartGatewayUplink", translate("Announce uplink"), translate("Which kind of uplink is exported to the other mesh nodes. " ..
+	"An uplink is detected by looking for a local HNA6 ::ffff:0:0/96 or 2000::/3. Default setting is \"both\"."))
+sgwuplink:value("none")
+sgwuplink:value("ipv4")
+sgwuplink:value("ipv6")
+sgwuplink:value("both")
+sgwuplink:depends("SmartGateway", "yes")
+sgwuplink.default="both"
+sgwuplink.optional = true
+sgwuplink.rmempty = true
+
+sgwulnat = s:taboption("smartgw", Flag, "SmartGatewayUplinkNAT", translate("Uplink uses NAT"), translate("If this Node uses NAT for connections to the internet. " ..
+	"Default is \"yes\"."))
+sgwulnat:depends("SmartGatewayUplink", "ipv4")
+sgwulnat:depends("SmartGatewayUplink", "both")
+sgwulnat.default="yes"
+sgwulnat.enabled="yes"
+sgwulnat.disabled="no"
+sgwnat.optional = true
+sgwnat.rmempty = true
+
+sgwspeed = s:taboption("smartgw", Value, "SmartGatewaySpeed", translate("Speed of the uplink"), translate("Specifies the speed of "..
+	"the uplink in kilobits/s. First parameter is upstream, second parameter is downstream. Default is \"128 1024\"."))
+sgwspeed:depends("SmartGatewayUplink", "ipv4")
+sgwspeed:depends("SmartGatewayUplink", "ipv6")
+sgwspeed:depends("SmartGatewayUplink", "both")
+sgwspeed.optional = true
+sgwspeed.rmempty = true
+
+sgwprefix = s:taboption("smartgw", Value, "SmartGatewayPrefix", translate("IPv6-Prefix of the uplink"), translate("This can be used " ..
+	"to signal the external IPv6 prefix of the uplink to the clients. This might allow a client to change it's local IPv6 address to " ..
+	"use the IPv6 gateway without any kind of address translation. The maximum prefix length is 64 bits. " ..
+	"Default is \"::/0\" (no prefix)."))
+sgwprefix:depends("SmartGatewayUplink", "ipv6")
+sgwprefix:depends("SmartGatewayUplink", "both")
+sgwprefix.optional = true
+sgwprefix.rmempty = true
+
+willingness = s:taboption("advanced", ListValue, "Willingness", translate("Willingness"),
+		translate("The fixed willingness to use. If not set willingness will be calculated dynamically based on battery/power status. Default is \"3\"."))
+for i=0,7 do
+	willingness:value(i)
+end
+willingness.optional = true
+willingness.default = "3"
+
+natthr = s:taboption("advanced", Value, "NatThreshold", translate("NAT threshold"),
+	translate("If the route to the current gateway is to be changed, the ETX value of this gateway is "..
+	"multiplied with this value before it is compared to the new one. "..
+	"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 if changed.<br />"..
+	"<b>WARNING:</b> This parameter should not be used together with the etx_ffeth metric!<br />"..
+	"Defaults to \"1.0\"."))
+for i=1,0.1,-0.1 do
+        natthr:value(i)
+end
+natthr:depends("LinkQualityAlgorithm", "etx_ff")
+natthr:depends("LinkQualityAlgorithm", "etx_float")
+natthr:depends("LinkQualityAlgorithm", "etx_fpm")
+natthr.default = "1.0"
+natthr.optional = true
+natthr.write = write_float
+
+
+i = m:section(TypedSection, "InterfaceDefaults", translate("Interfaces Defaults"))
+i.anonymous = true
+i.addremove = false
+
+i:tab("general", translate("General Settings"))
+i:tab("addrs",   translate("IP Addresses"))
+i:tab("timing",  translate("Timing and Validity"))
+
+mode = i:taboption("general", ListValue, "Mode", translate("Mode"),
+	translate("Interface Mode is used to prevent unnecessary packet forwarding on switched ethernet interfaces. "..
+	"valid Modes are \"mesh\" and \"ether\". Default is \"mesh\"."))
+mode:value("mesh")
+mode:value("ether")
+mode.optional = true
+mode.rmempty = true
+
+
+weight = i:taboption("general", Value, "Weight", translate("Weight"),
+	translate("When multiple links exist between hosts the weight of interface is used to determine the link to use. "..
+	"Normally the weight is automatically calculated by olsrd based on the characteristics of the interface, "..
+	"but here you can specify a fixed value. Olsrd will choose links with the lowest value.<br />"..
+	"<b>Note:</b> Interface weight is used only when LinkQualityLevel is set to 0. "..
+	"For any other value of LinkQualityLevel, the interface ETX value is used instead."))
+weight.optional = true
+weight.datatype = "uinteger"
+weight.placeholder = "0"
+
+lqmult = i:taboption("general", DynamicList, "LinkQualityMult", translate("LinkQuality Multiplicator"),
+	translate("Multiply routes with the factor given here. Allowed values are between 0.01 and 1.0. "..
+	"It is only used when LQ-Level is greater than 0. Examples:<br />"..
+	"reduce LQ to fd91:662e:3c58::1 by half: fd91:662e:3c58::1 0.5<br />"..
+	"reduce LQ to all nodes on this interface by 20%: default 0.8"))
+lqmult.optional = true
+lqmult.rmempty = true
+lqmult.cast = "table"
+lqmult.placeholder = "default 1.0"
+
+function lqmult.validate(self, value)
+	for _, v in pairs(value) do
+		if v ~= "" then
+			local val = util.split(v, " ")
+			local host = val[1]
+			local mult = val[2]
+			if not host or not mult then
+				return nil, translate("LQMult requires two values (IP address or 'default' and multiplicator) seperated by space.")
+			end
+			if not (host == "default" or ip.IPv6(host)) then
+				return nil, translate("Can only be a valid IPv6 address or 'default'")
+			end
+			if not tonumber(mult) or tonumber(mult) > 1 or tonumber(mult) < 0.01 then
+				return nil, translate("Invalid Value for LQMult-Value. Must be between 0.01 and 1.0.")
+			end
+			if not mult:match("[0-1]%.[0-9]+") then
+				return nil, translate("Invalid Value for LQMult-Value. You must use a decimal number between 0.01 and 1.0 here.")
+			end
+		end
+	end
+	return value
+end
+
+ip6m = i:taboption("addrs", Value, "IPv6Multicast", translate("IPv6 multicast"),
+	translate("IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal multicast."))
+ip6m.optional = true
+ip6m.datatype = "ip6addr"
+ip6m.placeholder = "FF02::6D"
+
+ip6s = i:taboption("addrs", Value, "IPv6Src", translate("IPv6 source"),
+	translate("IPv6 src prefix. OLSRd will choose one of the interface IPs which matches the prefix of this parameter. "..
+	"Default is \"0::/0\", which triggers the usage of a not-linklocal interface IP."))
+ip6s.optional = true
+ip6s.datatype = "ip6addr"
+ip6s.placeholder = "0::/0"
+
+
+hi = i:taboption("timing", Value, "HelloInterval", translate("Hello interval"))
+hi.optional = true
+hi.datatype = "ufloat"
+hi.placeholder = "5.0"
+hi.write = write_float
+
+hv = i:taboption("timing", Value, "HelloValidityTime", translate("Hello validity time"))
+hv.optional = true
+hv.datatype = "ufloat"
+hv.placeholder = "40.0"
+hv.write = write_float
+
+ti = i:taboption("timing", Value, "TcInterval", translate("TC interval"))
+ti.optional = true
+ti.datatype = "ufloat"
+ti.placeholder = "2.0"
+ti.write = write_float
+
+tv = i:taboption("timing", Value, "TcValidityTime", translate("TC validity time"))
+tv.optional = true
+tv.datatype = "ufloat"
+tv.placeholder = "256.0"
+tv.write = write_float
+
+mi = i:taboption("timing", Value, "MidInterval", translate("MID interval"))
+mi.optional = true
+mi.datatype = "ufloat"
+mi.placeholder = "18.0"
+mi.write = write_float
+
+mv = i:taboption("timing", Value, "MidValidityTime", translate("MID validity time"))
+mv.optional = true
+mv.datatype = "ufloat"
+mv.placeholder = "324.0"
+mv.write = write_float
+
+ai = i:taboption("timing", Value, "HnaInterval", translate("HNA interval"))
+ai.optional = true
+ai.datatype = "ufloat"
+ai.placeholder = "18.0"
+ai.write = write_float
+
+av = i:taboption("timing", Value, "HnaValidityTime", translate("HNA validity time"))
+av.optional = true
+av.datatype = "ufloat"
+av.placeholder = "108.0"
+av.write = write_float
+
+
+ifs = m:section(TypedSection, "Interface", translate("Interfaces"))
+ifs.addremove = true
+ifs.anonymous = true
+ifs.extedit   = luci.dispatcher.build_url("admin/services/olsrd6/iface/%s")
+ifs.template  = "cbi/tblsection"
+
+function ifs.create(...)
+	local sid = TypedSection.create(...)
+	luci.http.redirect(ifs.extedit % sid)
+end
+
+ign = ifs:option(Flag, "ignore", translate("Enable"))
+ign.enabled  = "0"
+ign.disabled = "1"
+ign.rmempty = false
+function ign.cfgvalue(self, section)
+	return Flag.cfgvalue(self, section) or "0"
+end
+
+network = ifs:option(DummyValue, "interface", translate("Network"))
+network.template = "cbi/network_netinfo"
+
+mode = ifs:option(DummyValue, "Mode", translate("Mode"))
+function mode.cfgvalue(...)
+	return Value.cfgvalue(...) or m.uci:get_first("olsrd6", "InterfaceDefaults", "Mode", "mesh")
+end
+
+hello = ifs:option(DummyValue, "_hello", translate("Hello"))
+function hello.cfgvalue(self, section)
+	local i = tonumber(m.uci:get("olsrd6", section, "HelloInterval"))     or tonumber(m.uci:get_first("olsrd6", "InterfaceDefaults", "HelloInterval", 5))
+	local v = tonumber(m.uci:get("olsrd6", section, "HelloValidityTime")) or tonumber(m.uci:get_first("olsrd6", "InterfaceDefaults", "HelloValidityTime", 40))
+	return "%.01fs / %.01fs" %{ i, v }
+end
+
+tc = ifs:option(DummyValue, "_tc", translate("TC"))
+function tc.cfgvalue(self, section)
+	local i = tonumber(m.uci:get("olsrd6", section, "TcInterval"))     or tonumber(m.uci:get_first("olsrd6", "InterfaceDefaults", "TcInterval", 2))
+	local v = tonumber(m.uci:get("olsrd6", section, "TcValidityTime")) or tonumber(m.uci:get_first("olsrd6", "InterfaceDefaults", "TcValidityTime", 256))
+	return "%.01fs / %.01fs" %{ i, v }
+end
+
+mid = ifs:option(DummyValue, "_mid", translate("MID"))
+function mid.cfgvalue(self, section)
+	local i = tonumber(m.uci:get("olsrd6", section, "MidInterval"))     or tonumber(m.uci:get_first("olsrd6", "InterfaceDefaults", "MidInterval", 18))
+	local v = tonumber(m.uci:get("olsrd6", section, "MidValidityTime")) or tonumber(m.uci:get_first("olsrd6", "InterfaceDefaults", "MidValidityTime", 324))
+	return "%.01fs / %.01fs" %{ i, v }
+end
+
+hna = ifs:option(DummyValue, "_hna", translate("HNA"))
+function hna.cfgvalue(self, section)
+	local i = tonumber(m.uci:get("olsrd6", section, "HnaInterval"))     or tonumber(m.uci:get_first("olsrd6", "InterfaceDefaults", "HnaInterval", 18))
+	local v = tonumber(m.uci:get("olsrd6", section, "HnaValidityTime")) or tonumber(m.uci:get_first("olsrd6", "InterfaceDefaults", "HnaValidityTime", 108))
+	return "%.01fs / %.01fs" %{ i, v }
+end
+
+return m