treewide: move freifunk-related packages to separate repo

Even Freifunk was one of the major factory to create the LuCI-system, it's
now only a very small part of LuCI. LuCI has become a much bigger thing
and it seems that it's time to move the packages only relating to Freifunk
into it's own feed.
On the mailinglist it was discussed [1] and a repo below the general
Freifunk team on github was created.

This commit removes all packages that will be hosted in the new repo [2]

1 - http://lists.freifunk.net/pipermail/wlannews-freifunk.net/2019-February/004818.html
2 - https://github.com/freifunk/openwrt-packages

Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>

2 files changed, 0 insertions, 205 deletions

diff --git a/applications/luci-app-meshwizard/luasrc/controller/meshwizard.lua b/applications/luci-app-meshwizard/luasrc/controller/meshwizard.lua
deleted file mode 100644
index 0ad76b521b..0000000000
--- a/applications/luci-app-meshwizard/luasrc/controller/meshwizard.lua
+++ /dev/null
@@ -1,9 +0,0 @@
--- Copyright 2011 Manuel Munz <freifunk somakoma de>
--- Licensed to the public under the Apache License 2.0.
-
-module "luci.controller.meshwizard"
-
-function index()
-	entry({"admin", "freifunk", "meshwizard"}, cbi("freifunk/meshwizard"), _("Mesh Wizard"), 40)
-end
-
diff --git a/applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua b/applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua
deleted file mode 100644
index 62ce25effb..0000000000
--- a/applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua
+++ /dev/null
@@ -1,196 +0,0 @@
--- wizard rewrite wip
-
-local uci = require "luci.model.uci".cursor()
-local sys = require "luci.sys"
-local util = require "luci.util"
-local ip = require "luci.ip"
-
-local community = "profile_" .. (uci:get("freifunk", "community", "name") or "Freifunk")
-local mesh_network = ip.IPv4(uci:get_first(community, "community", "mesh_network") or "10.0.0.0/8")
-local community_ipv6 = uci:get_first(community, "community", "ipv6") or 0
-local community_ipv6mode = uci:get_first(community, "community", "ipv6_config") or "static"
-local meshkit_ipv6 = uci:get("meshwizard", "ipv6", "enabled") or 0
-local community_vap = uci:get_first(community, "community", "vap") or 0
-
-m = Map("meshwizard", translate("Wizard"), translate("This wizard will assist you in setting up your router for Freifunk " ..
-	"or another similar wireless community network."))
-
-n = m:section(NamedSection, "netconfig", nil, translate("Interfaces"))
-n.anonymous = true
-
--- common functions
-
-function cbi_configure(device)
-	local configure = n:taboption(device, Flag, device .. "_config", translate("Configure this interface"),
-		translate("Note: this will set up this interface for mesh operation, i.e. add it to zone 'freifunk' and enable olsr."))
-end
-
-function cbi_ip4addr(device)
-	local ip4addr = n:taboption(device, Value, device .. "_ip4addr", translate("Mesh IP address"),
-		translate("This is a unique address in the mesh (e.g. 10.1.1.1) and has to be registered at your local community."))
-		ip4addr:depends(device .. "_config", 1)
-		ip4addr.datatype = "ip4addr"
-	function ip4addr.validate(self, value)
-		local x = ip.IPv4(value)
-		if mesh_network:contains(x) then
-			return value
-		else
-			return nil, translate("The given IP address is not inside the mesh network range ") ..
-			"(" .. mesh_network:string() .. ")."
-		end
-	end
-end
-
-function cbi_ip6addr(device)
-	local ip6addr = n:taboption(device, Value, device .. "_ip6addr", translate("Mesh IPv6 address"),
-		translate("This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and has to be registered at your local community."))
-		ip6addr:depends(device .. "_config", 1)
-		ip6addr.datatype = "ip6addr"
-end
-
-
-function cbi_dhcp(device)
-	local dhcp = n:taboption(device, Flag, device .. "_dhcp", translate("Enable DHCP"),
-		translate("DHCP will automatically assign ip addresses to clients"))
-	dhcp:depends(device .. "_config", 1)
-	dhcp.rmempty = true
-end
-
-function cbi_ra(device)
-	local ra = n:taboption(device, Flag, device .. "_ipv6ra", translate("Enable RA"),
-		translate("Send router advertisements on this device."))
-	ra:depends(device .. "_config", 1)
-	ra.rmempty = true
-end
-
-function cbi_dhcprange(device)
-	local dhcprange = n:taboption(device, Value, device .. "_dhcprange", translate("DHCP IP range"),
-		translate("The IP range from which clients are assigned ip addresses (e.g. 10.1.2.1/28). " ..
-		"If this is a range inside your mesh network range, then it will be announced as HNA. Any other range will use NAT. " ..
-		"If left empty then the defaults from the community profile will be used."))
-	dhcprange:depends(device .. "_dhcp", "1")
-	dhcprange.rmempty = true
-	dhcprange.datatype = "ip4addr"
-end
--- create tabs and config for wireless
-local nets={}
-uci:foreach("wireless", "wifi-device", function(section)
-        local device = section[".name"]
-	table.insert(nets, device)
-end)
-
-local wired_nets = {}
-uci:foreach("network", "interface", function(section)
-	local device = section[".name"]
-	if not util.contains(nets, device) and device ~= "loopback" and not device:find("wireless") then
-		table.insert(nets, device)
-		table.insert(wired_nets, device)
-	end
-end)
-
-for _, net in util.spairs(nets, function(a,b) return (nets[a] < nets[b]) end) do
-	n:tab(net, net)
-end
-
--- create cbi config for wireless
-uci:foreach("wireless", "wifi-device", function(section)
-	local device = section[".name"]
-	local hwtype = section.type
-	local syscc = section.country or uci:get(community, "wifi_device", "country") or
-		uci:get("freifunk", "wifi_device", "country")
-
-	cbi_configure(device)
-
-	-- Channel selection
-
-	if hwtype == "mac80211" then
-		sys.exec("iw reg set " .. syscc)
-	elseif hwtype == "broadcom" then
-		sys.exec ("wlc country " .. syscc)
-	end
-
-	local chan = n:taboption(device, ListValue, device .. "_channel", translate("Channel"),
-		translate("Your device and neighbouring nodes have to use the same channel."))
-	chan:depends(device .. "_config", 1)
-	chan:value('default')
-
-	local iwinfo = sys.wifi.getiwinfo(device)
-	if iwinfo and iwinfo.freqlist then
-		for _, f in ipairs(iwinfo.freqlist) do
-			if not f.restricted then
-				chan:value(f.channel)
-			end
-		end
-	end
-	-- IPv4 address
-	cbi_ip4addr(device)
-
-	-- DHCP enable
-	cbi_dhcp(device)
-
-	-- DHCP range
-	cbi_dhcprange(device)
-
-	-- IPv6 addr and RA
-	if community_ipv6 == "1" then
-		if community_ipv6mode == "static" then
-			cbi_ip6addr(device)
-		end
-		cbi_ra(device)
-	end
-
-	-- Enable VAP
-	local supports_vap = 0
-	if sys.call("/usr/bin/meshwizard/helpers/supports_vap.sh " .. device .. " " .. hwtype) == 0 then
-		supports_vap = 1
-	end
-	if supports_vap == 1 then
-		local vap = n:taboption(device, Flag, device .. "_vap", translate("Virtual Access Point (VAP)"),
-			translate("This will setup a new virtual wireless interface in Access Point mode."))
-		vap:depends(device .. "_dhcp", "1")
-                vap.rmempty = true
-                if community_vap == "1" then
-			vap.default = "1"
-		end
-	end
-end)
-
-for _, device in pairs(wired_nets) do
-	cbi_configure(device)
-	cbi_ip4addr(device)
-	cbi_dhcp(device)
-	cbi_dhcprange(device)
-	-- IPv6 addr and RA
-	if community_ipv6 == "1" then
-		if community_ipv6mode == "static" then
-			cbi_ip6addr(device)
-		end
-		cbi_ra(device)
-	end
-end
-
--- General settings
-g = m:section(TypedSection, "general", translate("General Settings"))
-g.anonymous = true
-
-local cleanup = g:option(Flag, "cleanup", translate("Cleanup config"),
-        translate("If this is selected then config is cleaned before setting new config options."))
-cleanup.default = "1"
-
-local restrict = g:option(Flag, "local_restrict", translate("Protect LAN"), 
-	translate("Check this to protect your LAN from other nodes or clients") .. " (" .. translate("recommended") .. ").")
-
-local share = g:option(Flag, "sharenet", translate("Share your internet connection"),
-	translate("Select this to allow others to use your connection to access the internet."))
-	share.rmempty = true
-
--- IPv6 config
-if community_ipv6 == "1" then
-	v6 = m:section(NamedSection, "ipv6", nil, translate("IPv6 Settings"))
-	local enabled = v6:option(Flag, "enabled", translate("Enabled"),
-        	translate("Activate or deactivate IPv6 config globally."))
-	enabled.default = meshkit_ipv6
-	enabled.rmempty = false
-end
-
-return m