Rework LuCI build system

 * Rename subdirectories to their repective OpenWrt package names
 * Make each LuCI module its own standalone package
 * Deploy a shared luci.mk which is used by each module Makefile

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

1 files changed, 199 insertions, 0 deletions

diff --git a/applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua b/applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua
new file mode 100644
index 000000000..68f7a5a25
--- /dev/null
+++ b/applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua
@@ -0,0 +1,199 @@
+-- wizard rewrite wip
+
+local uci = require "luci.model.uci".cursor()
+local sys = require "luci.sys"
+local util = require "luci.util"
+local ip = require "luci.ip"
+
+local community = "profile_" .. (uci:get("freifunk", "community", "name") or "Freifunk")
+local mesh_network = ip.IPv4(uci:get_first(community, "community", "mesh_network") or "10.0.0.0/8")
+local community_ipv6 = uci:get_first(community, "community", "ipv6") or 0
+local community_ipv6mode = uci:get_first(community, "community", "ipv6_config") or "static"
+local meshkit_ipv6 = uci:get("meshwizard", "ipv6", "enabled") or 0
+local community_vap = uci:get_first(community, "community", "vap") or 0
+
+m = Map("meshwizard", translate("Wizard"), translate("This wizard will assist you in setting up your router for Freifunk " ..
+	"or another similar wireless community network."))
+
+n = m:section(NamedSection, "netconfig", nil, translate("Interfaces"))
+n.anonymous = true
+
+-- common functions
+
+function cbi_configure(device)
+	local configure = n:taboption(device, Flag, device .. "_config", translate("Configure this interface"),
+		translate("Note: this will set up this interface for mesh operation, i.e. add it to zone 'freifunk' and enable olsr."))
+end
+
+function cbi_ip4addr(device)
+	local ip4addr = n:taboption(device, Value, device .. "_ip4addr", translate("Mesh IP address"),
+		translate("This is a unique address in the mesh (e.g. 10.1.1.1) and has to be registered at your local community."))
+		ip4addr:depends(device .. "_config", 1)
+		ip4addr.datatype = "ip4addr"
+	function ip4addr.validate(self, value)
+		local x = ip.IPv4(value)
+		if mesh_network:contains(x) then
+			return value
+		else
+			return nil, translate("The given IP address is not inside the mesh network range ") ..
+			"(" .. mesh_network:string() .. ")."
+		end
+	end
+end
+
+function cbi_ip6addr(device)
+	local ip6addr = n:taboption(device, Value, device .. "_ip6addr", translate("Mesh IPv6 address"),
+		translate("This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and has to be registered at your local community."))
+		ip6addr:depends(device .. "_config", 1)
+		ip6addr.datatype = "ip6addr"
+end
+
+
+function cbi_dhcp(device)
+	local dhcp = n:taboption(device, Flag, device .. "_dhcp", translate("Enable DHCP"),
+		translate("DHCP will automatically assign ip addresses to clients"))
+	dhcp:depends(device .. "_config", 1)
+	dhcp.rmempty = true
+end
+
+function cbi_ra(device)
+	local ra = n:taboption(device, Flag, device .. "_ipv6ra", translate("Enable RA"),
+		translate("Send router advertisements on this device."))
+	ra:depends(device .. "_config", 1)
+	ra.rmempty = true
+end
+
+function cbi_dhcprange(device)
+	local dhcprange = n:taboption(device, Value, device .. "_dhcprange", translate("DHCP IP range"),
+		translate("The IP range from which clients are assigned ip addresses (e.g. 10.1.2.1/28). " ..
+		"If this is a range inside your mesh network range, then it will be announced as HNA. Any other range will use NAT. " ..
+		"If left empty then the defaults from the community profile will be used."))
+	dhcprange:depends(device .. "_dhcp", "1")
+	dhcprange.rmempty = true
+	dhcprange.datatype = "ip4addr"
+end
+-- create tabs and config for wireless
+local nets={}
+uci:foreach("wireless", "wifi-device", function(section)
+        local device = section[".name"]
+	table.insert(nets, device)
+end)
+
+local wired_nets = {}
+uci:foreach("network", "interface", function(section)
+	local device = section[".name"]
+	if not util.contains(nets, device) and device ~= "loopback" and not device:find("wireless") then
+		table.insert(nets, device)
+		table.insert(wired_nets, device)
+	end
+end)
+
+for _, net in util.spairs(nets, function(a,b) return (nets[a] < nets[b]) end) do
+	n:tab(net, net)
+end
+
+-- create cbi config for wireless
+uci:foreach("wireless", "wifi-device", function(section)
+	local device = section[".name"]
+	local hwtype = section.type
+	local syscc = section.country or uci:get(community, "wifi_device", "country") or
+		uci:get("freifunk", "wifi_device", "country")
+
+	cbi_configure(device)
+
+	-- Channel selection
+
+	if hwtype == "atheros" then
+		local cc = util.trim(sys.exec("grep -i '" .. syscc .. "' /lib/wifi/cc_translate.txt |cut -d ' ' -f 2")) or 0
+		sys.exec('"echo " .. cc .. " > /proc/sys/dev/" .. device .. "/countrycode"')
+	elseif hwtype == "mac80211" then
+		sys.exec("iw reg set " .. syscc)
+	elseif hwtype == "broadcom" then
+		sys.exec ("wlc country " .. syscc)
+	end
+
+	local chan = n:taboption(device, ListValue, device .. "_channel", translate("Channel"),
+		translate("Your device and neighbouring nodes have to use the same channel."))
+	chan:depends(device .. "_config", 1)
+	chan:value('default')
+
+	local iwinfo = sys.wifi.getiwinfo(device)
+	if iwinfo and iwinfo.freqlist then
+		for _, f in ipairs(iwinfo.freqlist) do
+			if not f.restricted then
+				chan:value(f.channel)
+			end
+		end
+	end
+	-- IPv4 address
+	cbi_ip4addr(device)
+
+	-- DHCP enable
+	cbi_dhcp(device)
+
+	-- DHCP range
+	cbi_dhcprange(device)
+
+	-- IPv6 addr and RA
+	if community_ipv6 == "1" then
+		if community_ipv6mode == "static" then
+			cbi_ip6addr(device)
+		end
+		cbi_ra(device)
+	end
+
+	-- Enable VAP
+	local supports_vap = 0
+	if sys.call("/usr/bin/meshwizard/helpers/supports_vap.sh " .. device .. " " .. hwtype) == 0 then
+		supports_vap = 1
+	end
+	if supports_vap == 1 then
+		local vap = n:taboption(device, Flag, device .. "_vap", translate("Virtual Access Point (VAP)"),
+			translate("This will setup a new virtual wireless interface in Access Point mode."))
+		vap:depends(device .. "_dhcp", "1")
+                vap.rmempty = true
+                if community_vap == "1" then
+			vap.default = "1"
+		end
+	end
+end)
+
+for _, device in pairs(wired_nets) do
+	cbi_configure(device)
+	cbi_ip4addr(device)
+	cbi_dhcp(device)
+	cbi_dhcprange(device)
+	-- IPv6 addr and RA
+	if community_ipv6 == "1" then
+		if community_ipv6mode == "static" then
+			cbi_ip6addr(device)
+		end
+		cbi_ra(device)
+	end
+end
+
+-- General settings
+g = m:section(TypedSection, "general", translate("General Settings"))
+g.anonymous = true
+
+local cleanup = g:option(Flag, "cleanup", translate("Cleanup config"),
+        translate("If this is selected then config is cleaned before setting new config options."))
+cleanup.default = "1"
+
+local restrict = g:option(Flag, "local_restrict", translate("Protect LAN"), 
+	translate("Check this to protect your LAN from other nodes or clients") .. " (" .. translate("recommended") .. ").")
+
+local share = g:option(Flag, "sharenet", translate("Share your internet connection"),
+	translate("Select this to allow others to use your connection to access the internet."))
+	share.rmempty = true
+
+-- IPv6 config
+if community_ipv6 == "1" then
+	v6 = m:section(NamedSection, "ipv6", nil, translate("IPv6 Settings"))
+	local enabled = v6:option(Flag, "enabled", translate("Enabled"),
+        	translate("Activate or deactivate IPv6 config globally."))
+	enabled.default = meshkit_ipv6
+	enabled.rmempty = false
+end
+
+return m