luci-app-aria2: fix typos (#3373)

luci-app-aria2: fix typos

Signed-off-by: Balázs Úr <balazs@urbalazs.hu>

29 files changed, 177 insertions, 177 deletions

diff --git a/applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua b/applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua
index 17fdc566c..88068c136 100644
--- a/applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua
+++ b/applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua
@@ -67,7 +67,7 @@ for user in util.execi("cat /etc/passwd | cut -d':' -f1") do
 end
 
 o = s:taboption("basic", Value, "dir", translate("Download directory"),
-	translate("The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"))
+	translate("The directory to store the downloaded file. For example <code>/mnt/sda1</code>."))
 o.rmempty = false
 
 o = s:taboption("basic", Value, "config_dir", translate("Config file directory"),
@@ -239,7 +239,7 @@ o.placeholder = "60"
 
 o = s:taboption("http", Value, "lowest_speed_limit", translate("Lowest speed limit"),
 	"%s %s" % {
-		translate("Close connection if download speed is lower than or equal to this value(bytes per sec). " ..
+		translate("Close connection if download speed is lower than or equal to this value (bytes per sec). " ..
 	"0 means has no lowest speed limit."),
 		translate("You can append K or M.")
 	})
@@ -312,7 +312,7 @@ if aria2.bt then
 	o.default = "true"
 	o.rmempty = false
 
-	o = s:taboption("bt", Flag, "bt_save_metadata", translate("Sava metadata"),
+	o = s:taboption("bt", Flag, "bt_save_metadata", translate("Save metadata"),
 		translate("Save meta data as \".torrent\" file. This option has effect only when BitTorrent"
 		.. " Magnet URI is used. The file name is hex encoded info hash with suffix \".torrent\"."))
 	o.enabled = "true"
@@ -339,7 +339,7 @@ if aria2.bt then
 	o.placeholder = "6881-6999"
 
 	o = s:taboption("bt", Value, "dht_listen_port", translate("DHT Listen port"),
-		translate("Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure that the "
+		translate("Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure that the "
 		.. "specified ports are open for incoming UDP traffic."))
 	o:depends("enable_dht", "true")
 	o:depends("enable_dht6", "true")
@@ -426,7 +426,7 @@ o.disabled = "false"
 o.default = "false"
 
 o = s:taboption("advance", Value, "auto_save_interval", translate("Auto save interval"),
-	translate("Save a control file(*.aria2) every N seconds. If 0 is given, a control file is not"
+	translate("Save a control file (*.aria2) every N seconds. If 0 is given, a control file is not"
 	.. " saved during download."))
 o.datatype = "range(0, 600)"
 o.placeholder = "60"
@@ -446,7 +446,7 @@ o.placeholder = "16M"
 
 o = s:taboption("advance", ListValue, "file_allocation", translate("File allocation"),
 	translate("Specify file allocation method. If you are using newer file systems such as ext4"
-	.. " (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc\" is your best choice."
+	.. " (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc\" is your best choice."
 	.. " It allocates large(few GiB) files almost instantly, but it may not be available if your system"
 	.. " doesn't have posix_fallocate(3) function. Don't use \"falloc\" with legacy file systems such as"
 	.. " ext3 and FAT32 because it takes almost same time as \"prealloc\" and it blocks aria2 entirely"
diff --git a/applications/luci-app-aria2/po/bg/aria2.po b/applications/luci-app-aria2/po/bg/aria2.po
index 0a2b19158..a9811a1cf 100644
--- a/applications/luci-app-aria2/po/bg/aria2.po
+++ b/applications/luci-app-aria2/po/bg/aria2.po
@@ -68,7 +68,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -486,12 +486,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -559,7 +559,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -615,7 +615,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -678,7 +678,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/ca/aria2.po b/applications/luci-app-aria2/po/ca/aria2.po
index 64ae2c6c6..daad7ef91 100644
--- a/applications/luci-app-aria2/po/ca/aria2.po
+++ b/applications/luci-app-aria2/po/ca/aria2.po
@@ -74,7 +74,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -492,12 +492,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -565,7 +565,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -621,7 +621,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -684,7 +684,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/cs/aria2.po b/applications/luci-app-aria2/po/cs/aria2.po
index 7740460b6..ebc1fc97a 100644
--- a/applications/luci-app-aria2/po/cs/aria2.po
+++ b/applications/luci-app-aria2/po/cs/aria2.po
@@ -74,7 +74,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -492,12 +492,12 @@ msgid "Run daemon as user"
 msgstr "Spustit démona pod uživatelskými oprávněními"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -565,7 +565,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -621,7 +621,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -684,7 +684,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/de/aria2.po b/applications/luci-app-aria2/po/de/aria2.po
index 21d34a88b..6f3a58986 100644
--- a/applications/luci-app-aria2/po/de/aria2.po
+++ b/applications/luci-app-aria2/po/de/aria2.po
@@ -76,7 +76,7 @@ msgstr "Zertifikat überprüfen"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 "Schließe die Verbindung wenn die Download-Geschwinidigkeit niedriger oder "
 "gleich dieses Wertes (Bytes pro Sekunde) ist. 0 heißt es gibt keine "
@@ -518,12 +518,12 @@ msgid "Run daemon as user"
 msgstr "Daemon als Benutzer ausführen"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr "Speichere Metadaten"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -591,7 +591,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -647,7 +647,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -710,7 +710,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/el/aria2.po b/applications/luci-app-aria2/po/el/aria2.po
index 3385eccd7..8cb007a17 100644
--- a/applications/luci-app-aria2/po/el/aria2.po
+++ b/applications/luci-app-aria2/po/el/aria2.po
@@ -74,7 +74,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -492,12 +492,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -565,7 +565,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -621,7 +621,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -684,7 +684,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/en/aria2.po b/applications/luci-app-aria2/po/en/aria2.po
index 3cbedbb75..09228a086 100644
--- a/applications/luci-app-aria2/po/en/aria2.po
+++ b/applications/luci-app-aria2/po/en/aria2.po
@@ -68,7 +68,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -486,12 +486,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -559,7 +559,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -615,7 +615,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -678,7 +678,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/es/aria2.po b/applications/luci-app-aria2/po/es/aria2.po
index ecae3ade7..fadfc7d4a 100644
--- a/applications/luci-app-aria2/po/es/aria2.po
+++ b/applications/luci-app-aria2/po/es/aria2.po
@@ -78,7 +78,7 @@ msgstr "Comprobar certificado"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 "Cierre la conexión si la velocidad de descarga es menor o igual a este valor "
 "(bytes por segundo). 0 significa que no tiene límite de velocidad mínima."
@@ -514,12 +514,12 @@ msgid "Run daemon as user"
 msgstr "Ejecutar demonio como usuario"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr "Guardar metadatos"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 "Guarda un archivo de control (*.aria2) cada N segundos. Si se da 0, no se "
@@ -609,7 +609,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 "Configure el puerto de escucha UDP utilizado por DHT (IPv4, IPv6) y el "
@@ -681,7 +681,7 @@ msgstr "Mostrar URL"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -771,7 +771,7 @@ msgstr ""
 "y el archivo DHT."
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 "El directorio para almacenar el archivo descargado. p.ej. <code>/mnt/sda1</"
 "code>"
diff --git a/applications/luci-app-aria2/po/fr/aria2.po b/applications/luci-app-aria2/po/fr/aria2.po
index e3fef7aa5..617ef07c2 100644
--- a/applications/luci-app-aria2/po/fr/aria2.po
+++ b/applications/luci-app-aria2/po/fr/aria2.po
@@ -76,7 +76,7 @@ msgstr "Vérifier le certificat"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 "Ferme la connexion si la vitesse de téléchargement est inférieure ou égale à "
 "cette valeur (en bits par seconde). 0 signifie qu'il n'y a pas de limite de "
@@ -509,12 +509,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr "Enregistrer les métadonnées"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 "Enregistre un fichier de contrôle (*.aria2) toutes les N secondes. Si défini "
@@ -584,7 +584,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -652,7 +652,7 @@ msgstr "Afficher l'URL"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -724,7 +724,7 @@ msgstr ""
 "session et le fichier DHT."
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 "Répertoire dans lequel télécharger le fichier télécharger. Par ex. <code>/"
 "mnt/sda1</code>"
diff --git a/applications/luci-app-aria2/po/he/aria2.po b/applications/luci-app-aria2/po/he/aria2.po
index c615f2efa..ec2f43b33 100644
--- a/applications/luci-app-aria2/po/he/aria2.po
+++ b/applications/luci-app-aria2/po/he/aria2.po
@@ -68,7 +68,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -486,12 +486,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -559,7 +559,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -615,7 +615,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -678,7 +678,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/hi/aria2.po b/applications/luci-app-aria2/po/hi/aria2.po
index 3a9a7d2f5..f83cd973d 100644
--- a/applications/luci-app-aria2/po/hi/aria2.po
+++ b/applications/luci-app-aria2/po/hi/aria2.po
@@ -68,7 +68,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -486,12 +486,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -559,7 +559,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -615,7 +615,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -678,7 +678,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/hu/aria2.po b/applications/luci-app-aria2/po/hu/aria2.po
index 208786a91..dce2ba53e 100644
--- a/applications/luci-app-aria2/po/hu/aria2.po
+++ b/applications/luci-app-aria2/po/hu/aria2.po
@@ -76,7 +76,7 @@ msgstr "Tanúsítvány ellenőrzése"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 "Kapcsolat lezárása, ha a letöltési sebesség kisebb vagy egyenlő ezzel az "
 "értékkel (bájt/másodperc). A 0 azt jelenti, hogy nincs legalacsonyabb "
@@ -520,12 +520,12 @@ msgid "Run daemon as user"
 msgstr "Démon futtatása felhasználóként"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr "Metaadatok mentése"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 "Vezérlőfájl (*.aria2) mentése N másodpercenként. Ha 0 van megadva, akkor a "
@@ -618,7 +618,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 "A DHT (IPv4, IPv6) és az UDP követő által használt UDP figyelési port "
@@ -690,7 +690,7 @@ msgstr "URL megjelenítése"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -780,8 +780,8 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr "A könyvtár a beállítófájl, a munkamenetfájl és a DHT-fájl tárolásához."
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
-msgstr "A könyvtár a letöltött fájl tárolásához. Például <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
+msgstr "A könyvtár a letöltött fájl tárolásához. Például <code>/mnt/sda1</code>."
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
 msgid "The file name of the log file."
diff --git a/applications/luci-app-aria2/po/it/aria2.po b/applications/luci-app-aria2/po/it/aria2.po
index 3c71448a4..47507ca3c 100644
--- a/applications/luci-app-aria2/po/it/aria2.po
+++ b/applications/luci-app-aria2/po/it/aria2.po
@@ -74,7 +74,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -492,12 +492,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -565,7 +565,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -621,7 +621,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -684,7 +684,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/ja/aria2.po b/applications/luci-app-aria2/po/ja/aria2.po
index 1f68cb3ab..3775d0062 100644
--- a/applications/luci-app-aria2/po/ja/aria2.po
+++ b/applications/luci-app-aria2/po/ja/aria2.po
@@ -68,7 +68,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -486,12 +486,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -559,7 +559,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -615,7 +615,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -678,7 +678,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/ko/aria2.po b/applications/luci-app-aria2/po/ko/aria2.po
index 1b671625e..c651b2fec 100644
--- a/applications/luci-app-aria2/po/ko/aria2.po
+++ b/applications/luci-app-aria2/po/ko/aria2.po
@@ -68,7 +68,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -486,12 +486,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -559,7 +559,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -615,7 +615,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -678,7 +678,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/ms/aria2.po b/applications/luci-app-aria2/po/ms/aria2.po
index 85a7aed19..e3f5bdc7d 100644
--- a/applications/luci-app-aria2/po/ms/aria2.po
+++ b/applications/luci-app-aria2/po/ms/aria2.po
@@ -68,7 +68,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -486,12 +486,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -559,7 +559,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -615,7 +615,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -678,7 +678,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/nb_NO/aria2.po b/applications/luci-app-aria2/po/nb_NO/aria2.po
index 394627bc9..3cc717868 100644
--- a/applications/luci-app-aria2/po/nb_NO/aria2.po
+++ b/applications/luci-app-aria2/po/nb_NO/aria2.po
@@ -74,7 +74,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -492,12 +492,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -565,7 +565,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -621,7 +621,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -684,7 +684,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/pl/aria2.po b/applications/luci-app-aria2/po/pl/aria2.po
index 3b478e73a..03a6e3fb1 100644
--- a/applications/luci-app-aria2/po/pl/aria2.po
+++ b/applications/luci-app-aria2/po/pl/aria2.po
@@ -77,7 +77,7 @@ msgstr "Sprawdź certyfikat"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 "Zamknij połączenie, jeśli prędkość pobierania jest mniejsza lub równa tej "
 "wartości (bajty na sekundę). 0 oznacza, że nie ma dolnej granicy prędkości."
@@ -511,12 +511,12 @@ msgid "Run daemon as user"
 msgstr "Uruchom daemona jako użytkownik"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr "Zapisz metadane"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 "Zapisz plik kontrolny(*.aria2) co N sekund. Jeśli podano 0, plik kontrolny "
@@ -605,7 +605,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 "Ustaw port odsłuchu UDP używany przez DHT(IPv4, IPv6) i tracker UDP. Upewnij "
@@ -674,7 +674,7 @@ msgstr "Pokaż adres URL"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -750,8 +750,8 @@ msgstr ""
 "Katalog do przechowywania pliku konfiguracyjnego, pliku sesji i pliku DHT."
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
-msgstr "Katalog do zapisu pobranych plików. np. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
+msgstr "Katalog do zapisu pobranych plików. np. <code>/mnt/sda1</code>."
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
 msgid "The file name of the log file."
diff --git a/applications/luci-app-aria2/po/pt-br/aria2.po b/applications/luci-app-aria2/po/pt-br/aria2.po
index aeca0b76f..137f79b9d 100644
--- a/applications/luci-app-aria2/po/pt-br/aria2.po
+++ b/applications/luci-app-aria2/po/pt-br/aria2.po
@@ -81,7 +81,7 @@ msgstr "Verificar o certificado"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 "Feche a conexão caso a velocidade de download seja menor ou igual a este "
 "valor (em bytes por segundo). 0 significa que não há limite mínimo de "
@@ -523,12 +523,12 @@ msgid "Run daemon as user"
 msgstr "Executar serviço como usuário"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr "Salvar os metadados"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 "Gravar um arquivo de controle (*.aria2) a cada N segundos. Caso este valor "
@@ -618,7 +618,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 "Defina a porta de escuta UDP usada pelo DHT(IPv4, IPv6) e pelo rastreador "
@@ -689,7 +689,7 @@ msgstr "Mostrar URL"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -781,7 +781,7 @@ msgstr ""
 "arquivo DHT."
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 "O diretório para armazenar o arquivo baixado, por exemplo, <code>/mnt/"
 "sda1</code>"
diff --git a/applications/luci-app-aria2/po/pt/aria2.po b/applications/luci-app-aria2/po/pt/aria2.po
index 674e5b916..8be50d188 100644
--- a/applications/luci-app-aria2/po/pt/aria2.po
+++ b/applications/luci-app-aria2/po/pt/aria2.po
@@ -76,7 +76,7 @@ msgstr "Verificar o certificado"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 "Fechar a ligação se a velocidade de transferência for inferior ou igual a "
 "este valor (bytes por segundo). 0 significa que não tem limite de velocidade "
@@ -517,12 +517,12 @@ msgid "Run daemon as user"
 msgstr "Executar serviço como utilizador"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr "Gravar metadados"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 "Gravar um ficheiro de controle (*.aria2) a cada N segundos. Se 0 for dado, "
@@ -613,10 +613,10 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
-"Definir a porta de escuta UDP usada pelo DHT(IPv4, IPv6) e pelo rastreador "
+"Definir a porta de escuta UDP usada pelo DHT (IPv4, IPv6) e pelo rastreador "
 "UDP. Certifique-se de que as portas especificadas estão abertas para o "
 "tráfego UDP de entrada."
 
@@ -684,7 +684,7 @@ msgstr "Mostrar URL"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -774,7 +774,7 @@ msgstr ""
 "ficheiro DHT."
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 "O diretório para armazenar o ficheiro descarregado, por exemplo, <code>/mnt/"
 "sda1</code>"
diff --git a/applications/luci-app-aria2/po/ro/aria2.po b/applications/luci-app-aria2/po/ro/aria2.po
index ef3bdeaed..133f8cfdf 100644
--- a/applications/luci-app-aria2/po/ro/aria2.po
+++ b/applications/luci-app-aria2/po/ro/aria2.po
@@ -75,7 +75,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -493,12 +493,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -566,7 +566,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -622,7 +622,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -685,7 +685,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/ru/aria2.po b/applications/luci-app-aria2/po/ru/aria2.po
index 205921892..8c6cdcf9e 100644
--- a/applications/luci-app-aria2/po/ru/aria2.po
+++ b/applications/luci-app-aria2/po/ru/aria2.po
@@ -80,7 +80,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -498,12 +498,12 @@ msgid "Run daemon as user"
 msgstr "Запуск демона<br />от имени пользователя"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -571,7 +571,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -627,7 +627,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -690,7 +690,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/sk/aria2.po b/applications/luci-app-aria2/po/sk/aria2.po
index 74bbcaad1..d2370b05e 100644
--- a/applications/luci-app-aria2/po/sk/aria2.po
+++ b/applications/luci-app-aria2/po/sk/aria2.po
@@ -68,7 +68,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -486,12 +486,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -559,7 +559,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -615,7 +615,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -678,7 +678,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/sv/aria2.po b/applications/luci-app-aria2/po/sv/aria2.po
index 0f90bdf3c..fdfea9324 100644
--- a/applications/luci-app-aria2/po/sv/aria2.po
+++ b/applications/luci-app-aria2/po/sv/aria2.po
@@ -74,7 +74,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -492,12 +492,12 @@ msgid "Run daemon as user"
 msgstr "Kör daemon som användare"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -565,7 +565,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -621,7 +621,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -684,7 +684,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/tr/aria2.po b/applications/luci-app-aria2/po/tr/aria2.po
index 305b26671..d017fe2c5 100644
--- a/applications/luci-app-aria2/po/tr/aria2.po
+++ b/applications/luci-app-aria2/po/tr/aria2.po
@@ -74,7 +74,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -492,12 +492,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -565,7 +565,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -621,7 +621,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -684,7 +684,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/uk/aria2.po b/applications/luci-app-aria2/po/uk/aria2.po
index b06c3dd9c..6bd478367 100644
--- a/applications/luci-app-aria2/po/uk/aria2.po
+++ b/applications/luci-app-aria2/po/uk/aria2.po
@@ -75,7 +75,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -495,12 +495,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -568,7 +568,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -624,7 +624,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -687,7 +687,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/vi/aria2.po b/applications/luci-app-aria2/po/vi/aria2.po
index 6c938dae8..9b81a17e1 100644
--- a/applications/luci-app-aria2/po/vi/aria2.po
+++ b/applications/luci-app-aria2/po/vi/aria2.po
@@ -74,7 +74,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -492,12 +492,12 @@ msgid "Run daemon as user"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -565,7 +565,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -621,7 +621,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -684,7 +684,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/zh-cn/aria2.po b/applications/luci-app-aria2/po/zh-cn/aria2.po
index 8d10c0da0..e10e63f54 100644
--- a/applications/luci-app-aria2/po/zh-cn/aria2.po
+++ b/applications/luci-app-aria2/po/zh-cn/aria2.po
@@ -74,7 +74,7 @@ msgstr "检查证书"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 "如果速度小于或等于这个速度（byte/s），关闭下载下载连接。0 表示不限制下载速"
 "度。"
@@ -501,12 +501,12 @@ msgid "Run daemon as user"
 msgstr "以此用户权限运行"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr "保存元数据"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 "每 N 秒保存下载“控制文件”（*.aria2）。设置 0 表示在下载过程中不保存控制文件。"
@@ -589,7 +589,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 "为 DHT（IPv4，IPv6）和 UDP tracker 设置 UDP 监听端口。请确保正确放行了这些端"
@@ -649,7 +649,7 @@ msgstr "显示 URL"
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -725,7 +725,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr "用于放置配置文件，Session 文件和 DHT 文件的目录。"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr "用于放置下载文件的目录。例如：<code>/mnt/sda1</code>"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81
diff --git a/applications/luci-app-aria2/po/zh-tw/aria2.po b/applications/luci-app-aria2/po/zh-tw/aria2.po
index 493b7a9eb..ef4a23004 100644
--- a/applications/luci-app-aria2/po/zh-tw/aria2.po
+++ b/applications/luci-app-aria2/po/zh-tw/aria2.po
@@ -75,7 +75,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:242
 msgid ""
 "Close connection if download speed is lower than or equal to this "
-"value(bytes per sec). 0 means has no lowest speed limit."
+"value (bytes per sec). 0 means has no lowest speed limit."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/view/aria2/log_template.htm:49
@@ -493,12 +493,12 @@ msgid "Run daemon as user"
 msgstr "以此使用者許可權執行"
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:315
-msgid "Sava metadata"
+msgid "Save metadata"
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:429
 msgid ""
-"Save a control file(*.aria2) every N seconds. If 0 is given, a control file "
+"Save a control file (*.aria2) every N seconds. If 0 is given, a control file "
 "is not saved during download."
 msgstr ""
 
@@ -566,7 +566,7 @@ msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:342
 msgid ""
-"Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Make sure "
+"Set UDP listening port used by DHT (IPv4, IPv6) and UDP tracker. Make sure "
 "that the specified ports are open for incoming UDP traffic."
 msgstr ""
 
@@ -622,7 +622,7 @@ msgstr ""
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:448
 msgid ""
 "Specify file allocation method. If you are using newer file systems such as "
-"ext4 (with extents support), btrfs, xfs or NTFS(MinGW build only), \"falloc"
+"ext4 (with extents support), btrfs, xfs or NTFS (MinGW build only), \"falloc"
 "\" is your best choice. It allocates large(few GiB) files almost instantly, "
 "but it may not be available if your system doesn't have posix_fallocate(3) "
 "function. Don't use \"falloc\" with legacy file systems such as ext3 and "
@@ -685,7 +685,7 @@ msgid "The directory to store the config file, session file and DHT file."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:70
-msgid "The directory to store the downloaded file. eg. <code>/mnt/sda1</code>"
+msgid "The directory to store the downloaded file. For example <code>/mnt/sda1</code>."
 msgstr ""
 
 #: applications/luci-app-aria2/luasrc/model/cbi/aria2/config.lua:81