luci-app-travelmate: sync translations

Synchronized translations with sources.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>

4 files changed, 185 insertions, 85 deletions

diff --git a/applications/luci-app-travelmate/po/ja/travelmate.po b/applications/luci-app-travelmate/po/ja/travelmate.po
index 56e3badab..f257cbadf 100644
--- a/applications/luci-app-travelmate/po/ja/travelmate.po
+++ b/applications/luci-app-travelmate/po/ja/travelmate.po
@@ -12,6 +12,9 @@ msgstr ""
 "Plural-Forms: nplurals=1; plural=0;\n"
 "Language: ja\n"
 
+msgid "AP QR-Codes"
+msgstr ""
+
 msgid "Actions"
 msgstr "操作"
 
@@ -43,6 +46,14 @@ msgstr "BSSID"
 msgid "Back to overview"
 msgstr "概要へ戻る"
 
+msgid "Captive Portal Detection"
+msgstr ""
+
+msgid ""
+"Check the internet availability, log captive portal redirections and keep "
+"the uplink connection 'alive'."
+msgstr ""
+
 msgid "Cipher"
 msgstr "暗号化方式"
 
@@ -135,13 +146,15 @@ msgid "Force a manual uplink rescan / reconnect in 'trigger' mode."
 msgstr ""
 "'trigger' モード時に、手動でアップリンクの再スキャンと再接続を行います。"
 
-msgid "How long should travelmate wait for a successful wlan interface reload."
+msgid ""
+"Here you'll find the QR codes from all of your configured Access Points. It "
+"allows you to connect your Android or iOS devices to your router's WiFi "
+"using the QR code shown below."
 msgstr ""
-"無線LAN インターフェースのリロードが成功するまでの、Travelmate の待機時間で"
-"す。"
 
-msgid "How many times should travelmate try to connect to an Uplink."
-msgstr "Travelmate がアップリンクへの接続を試行する回数です。"
+msgid ""
+"How long should travelmate wait for a successful wlan uplink connection."
+msgstr ""
 
 msgid "Identity"
 msgstr "ID"
@@ -171,6 +184,11 @@ msgstr "最終実行日時"
 msgid "Manual Rescan"
 msgstr "手動再スキャン"
 
+msgid ""
+"Minimum signal quality threshold as percent for conditional uplink (dis-) "
+"connections."
+msgstr ""
+
 msgid "Move down"
 msgstr "下へ"
 
@@ -233,6 +251,9 @@ msgstr "再スキャン"
 msgid "Restrict travelmate to a dedicated radio, e.g. 'radio0'."
 msgstr "Travelmate が指定された無線に接続するよう制御します。（例: 'radio0'）"
 
+msgid "Retry limit to connect to an uplink."
+msgstr ""
+
 msgid "Runtime Information"
 msgstr "実行情報"
 
@@ -248,6 +269,9 @@ msgstr "保存"
 msgid "Scan"
 msgstr "スキャン:"
 
+msgid "Signal Quality Threshold"
+msgstr ""
+
 msgid "Signal strength"
 msgstr "信号強度"
 
@@ -298,24 +322,20 @@ msgstr ""
 msgid "Timeout in seconds between retries in 'automatic' mode."
 msgstr "'automatic' モード時に接続を確認または再試行する間隔（秒）です。"
 
-msgid "To disable this feature set it to '0' which means unlimited retries."
-msgstr ""
-"この機能を無効にして接続の再試行を無制限にする場合、 '0' を設定します。"
-
 msgid "Travelmate"
 msgstr "Travelmate"
 
 msgid "Travelmate Logfile"
 msgstr "Travelmate ログファイル"
 
-msgid "Travelmate Status"
-msgstr "Travelmate ステータス"
+msgid "Travelmate Status (Quality)"
+msgstr ""
 
 msgid "Travelmate Version"
 msgstr "Travelmate バージョン"
 
-msgid "Trigger delay"
-msgstr "トリガー遅延"
+msgid "Trigger Delay"
+msgstr ""
 
 msgid "Unknown"
 msgstr "不明"
@@ -365,20 +385,39 @@ msgstr ""
 "ファイアウォールの wan ゾーンに追加します。このステップは、一度だけ実行される"
 "必要があります。"
 
-msgid "connected"
-msgstr "接続済"
-
-msgid "error"
-msgstr "エラー"
-
 msgid "hidden"
 msgstr "（不明）"
 
 msgid "n/a"
 msgstr "利用不可"
 
-msgid "not connected"
-msgstr "未接続"
+#~ msgid ""
+#~ "How long should travelmate wait for a successful wlan interface reload."
+#~ msgstr ""
+#~ "無線LAN インターフェースのリロードが成功するまでの、Travelmate の待機時間"
+#~ "です。"
+
+#~ msgid "How many times should travelmate try to connect to an Uplink."
+#~ msgstr "Travelmate がアップリンクへの接続を試行する回数です。"
+
+#~ msgid "To disable this feature set it to '0' which means unlimited retries."
+#~ msgstr ""
+#~ "この機能を無効にして接続の再試行を無制限にする場合、 '0' を設定します。"
+
+#~ msgid "Travelmate Status"
+#~ msgstr "Travelmate ステータス"
+
+#~ msgid "Trigger delay"
+#~ msgstr "トリガー遅延"
+
+#~ msgid "connected"
+#~ msgstr "接続済"
+
+#~ msgid "error"
+#~ msgstr "エラー"
+
+#~ msgid "not connected"
+#~ msgstr "未接続"
 
-msgid "running"
-msgstr "実行中"
+#~ msgid "running"
+#~ msgstr "実行中"
diff --git a/applications/luci-app-travelmate/po/pt-br/travelmate.po b/applications/luci-app-travelmate/po/pt-br/travelmate.po
index cf17b024e..7cb6ac061 100644
--- a/applications/luci-app-travelmate/po/pt-br/travelmate.po
+++ b/applications/luci-app-travelmate/po/pt-br/travelmate.po
@@ -12,6 +12,9 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
 "Language: pt_BR\n"
 
+msgid "AP QR-Codes"
+msgstr ""
+
 msgid "Actions"
 msgstr ""
 
@@ -43,6 +46,14 @@ msgstr ""
 msgid "Back to overview"
 msgstr ""
 
+msgid "Captive Portal Detection"
+msgstr ""
+
+msgid ""
+"Check the internet availability, log captive portal redirections and keep "
+"the uplink connection 'alive'."
+msgstr ""
+
 msgid "Cipher"
 msgstr ""
 
@@ -129,10 +140,14 @@ msgstr ""
 msgid "Force a manual uplink rescan / reconnect in 'trigger' mode."
 msgstr ""
 
-msgid "How long should travelmate wait for a successful wlan interface reload."
+msgid ""
+"Here you'll find the QR codes from all of your configured Access Points. It "
+"allows you to connect your Android or iOS devices to your router's WiFi "
+"using the QR code shown below."
 msgstr ""
 
-msgid "How many times should travelmate try to connect to an Uplink."
+msgid ""
+"How long should travelmate wait for a successful wlan uplink connection."
 msgstr ""
 
 msgid "Identity"
@@ -161,6 +176,11 @@ msgstr ""
 msgid "Manual Rescan"
 msgstr ""
 
+msgid ""
+"Minimum signal quality threshold as percent for conditional uplink (dis-) "
+"connections."
+msgstr ""
+
 msgid "Move down"
 msgstr ""
 
@@ -219,6 +239,9 @@ msgstr ""
 msgid "Restrict travelmate to a dedicated radio, e.g. 'radio0'."
 msgstr ""
 
+msgid "Retry limit to connect to an uplink."
+msgstr ""
+
 msgid "Runtime Information"
 msgstr ""
 
@@ -234,6 +257,9 @@ msgstr ""
 msgid "Scan"
 msgstr ""
 
+msgid "Signal Quality Threshold"
+msgstr ""
+
 msgid "Signal strength"
 msgstr ""
 
@@ -274,22 +300,19 @@ msgstr ""
 msgid "Timeout in seconds between retries in 'automatic' mode."
 msgstr ""
 
-msgid "To disable this feature set it to '0' which means unlimited retries."
-msgstr ""
-
 msgid "Travelmate"
 msgstr "Travelmate"
 
 msgid "Travelmate Logfile"
 msgstr ""
 
-msgid "Travelmate Status"
+msgid "Travelmate Status (Quality)"
 msgstr ""
 
 msgid "Travelmate Version"
 msgstr ""
 
-msgid "Trigger delay"
+msgid "Trigger Delay"
 msgstr ""
 
 msgid "Unknown"
@@ -338,24 +361,12 @@ msgid ""
 "add it to the wan zone of the firewall. This step has only to be done once."
 msgstr ""
 
-msgid "connected"
-msgstr ""
-
-msgid "error"
-msgstr ""
-
 msgid "hidden"
 msgstr ""
 
 msgid "n/a"
 msgstr ""
 
-msgid "not connected"
-msgstr ""
-
-msgid "running"
-msgstr ""
-
 #~ msgid ""
 #~ "Brief advice: Create a wwan interface, configure it to use dhcp and add "
 #~ "it to the wan zone in firewall. Create the wifi interfaces to be used "
diff --git a/applications/luci-app-travelmate/po/ru/travelmate.po b/applications/luci-app-travelmate/po/ru/travelmate.po
index fe0e47647..0b04e2783 100644
--- a/applications/luci-app-travelmate/po/ru/travelmate.po
+++ b/applications/luci-app-travelmate/po/ru/travelmate.po
@@ -15,6 +15,9 @@ msgstr ""
 "Project-Info: Это технический перевод, не дословный. Главное-удобный русский "
 "интерфейс, все проверялось в графическом режиме, совместим с другими apps\n"
 
+msgid "AP QR-Codes"
+msgstr ""
+
 msgid "Actions"
 msgstr "Действия"
 
@@ -46,6 +49,14 @@ msgstr "BSSID"
 msgid "Back to overview"
 msgstr "Назад в меню"
 
+msgid "Captive Portal Detection"
+msgstr ""
+
+msgid ""
+"Check the internet availability, log captive portal redirections and keep "
+"the uplink connection 'alive'."
+msgstr ""
+
 msgid "Cipher"
 msgstr "Алгоритм шифрования"
 
@@ -138,13 +149,15 @@ msgstr ""
 "Принудительно выполнить повторное сканирование/повторное подключение внешних "
 "сетей в режиме 'ручной'."
 
-msgid "How long should travelmate wait for a successful wlan interface reload."
+msgid ""
+"Here you'll find the QR codes from all of your configured Access Points. It "
+"allows you to connect your Android or iOS devices to your router's WiFi "
+"using the QR code shown below."
 msgstr ""
-"Временная задержка необходима TravelMate для полной перезагрузки wlan "
-"интерфейса."
 
-msgid "How many times should travelmate try to connect to an Uplink."
-msgstr "Сколько раз TravelMate должен пытаться подключиться к сети. "
+msgid ""
+"How long should travelmate wait for a successful wlan uplink connection."
+msgstr ""
 
 msgid "Identity"
 msgstr "Идентификация EAP"
@@ -174,6 +187,11 @@ msgstr "Дата последнего запуска"
 msgid "Manual Rescan"
 msgstr "Поиск сети вручную"
 
+msgid ""
+"Minimum signal quality threshold as percent for conditional uplink (dis-) "
+"connections."
+msgstr ""
+
 msgid "Move down"
 msgstr "Переместить вниз"
 
@@ -238,6 +256,9 @@ msgstr "Пересканировать"
 msgid "Restrict travelmate to a dedicated radio, e.g. 'radio0'."
 msgstr "Выделить TravelMate-у конкретное Wi-Fi устройство, например 'radio0'."
 
+msgid "Retry limit to connect to an uplink."
+msgstr ""
+
 msgid "Runtime Information"
 msgstr "Информация о состоянии"
 
@@ -253,6 +274,9 @@ msgstr "Сохранить"
 msgid "Scan"
 msgstr "Поиск"
 
+msgid "Signal Quality Threshold"
+msgstr ""
+
 msgid "Signal strength"
 msgstr "Мощность сигнала"
 
@@ -305,25 +329,20 @@ msgstr ""
 "Время ожидания в секундах между повторными попытками соединения в режиме "
 "'автоматически'."
 
-msgid "To disable this feature set it to '0' which means unlimited retries."
-msgstr ""
-"<br />Чтобы отключить эту функцию, установите значение '0', что означает "
-"неограниченное количество попыток."
-
 msgid "Travelmate"
 msgstr "TravelMate"
 
 msgid "Travelmate Logfile"
 msgstr "Системный журнал TravelMate"
 
-msgid "Travelmate Status"
-msgstr "Состояние Travelmate"
+msgid "Travelmate Status (Quality)"
+msgstr ""
 
 msgid "Travelmate Version"
 msgstr "Версия TravelMate"
 
-msgid "Trigger delay"
-msgstr "Задержка запуска"
+msgid "Trigger Delay"
+msgstr ""
 
 msgid "Unknown"
 msgstr "Неизвестно"
@@ -371,20 +390,40 @@ msgid ""
 "add it to the wan zone of the firewall. This step has only to be done once."
 msgstr "добавить в wan зону межсетевого экрана. Можно сделать только один раз."
 
-msgid "connected"
-msgstr "подключен"
-
-msgid "error"
-msgstr "ошибка"
-
 msgid "hidden"
 msgstr "скрытый"
 
 msgid "n/a"
 msgstr "нет данных"
 
-msgid "not connected"
-msgstr "не подключено"
+#~ msgid ""
+#~ "How long should travelmate wait for a successful wlan interface reload."
+#~ msgstr ""
+#~ "Временная задержка необходима TravelMate для полной перезагрузки wlan "
+#~ "интерфейса."
+
+#~ msgid "How many times should travelmate try to connect to an Uplink."
+#~ msgstr "Сколько раз TravelMate должен пытаться подключиться к сети. "
+
+#~ msgid "To disable this feature set it to '0' which means unlimited retries."
+#~ msgstr ""
+#~ "<br />Чтобы отключить эту функцию, установите значение '0', что означает "
+#~ "неограниченное количество попыток."
+
+#~ msgid "Travelmate Status"
+#~ msgstr "Состояние Travelmate"
+
+#~ msgid "Trigger delay"
+#~ msgstr "Задержка запуска"
+
+#~ msgid "connected"
+#~ msgstr "подключен"
+
+#~ msgid "error"
+#~ msgstr "ошибка"
+
+#~ msgid "not connected"
+#~ msgstr "не подключено"
 
-msgid "running"
-msgstr "работает"
+#~ msgid "running"
+#~ msgstr "работает"
diff --git a/applications/luci-app-travelmate/po/templates/travelmate.pot b/applications/luci-app-travelmate/po/templates/travelmate.pot
index aeefa491d..e27c61a9d 100644
--- a/applications/luci-app-travelmate/po/templates/travelmate.pot
+++ b/applications/luci-app-travelmate/po/templates/travelmate.pot
@@ -1,6 +1,9 @@
 msgid ""
 msgstr "Content-Type: text/plain; charset=UTF-8"
 
+msgid "AP QR-Codes"
+msgstr ""
+
 msgid "Actions"
 msgstr ""
 
@@ -32,6 +35,14 @@ msgstr ""
 msgid "Back to overview"
 msgstr ""
 
+msgid "Captive Portal Detection"
+msgstr ""
+
+msgid ""
+"Check the internet availability, log captive portal redirections and keep "
+"the uplink connection 'alive'."
+msgstr ""
+
 msgid "Cipher"
 msgstr ""
 
@@ -118,10 +129,14 @@ msgstr ""
 msgid "Force a manual uplink rescan / reconnect in 'trigger' mode."
 msgstr ""
 
-msgid "How long should travelmate wait for a successful wlan interface reload."
+msgid ""
+"Here you'll find the QR codes from all of your configured Access Points. It "
+"allows you to connect your Android or iOS devices to your router's WiFi "
+"using the QR code shown below."
 msgstr ""
 
-msgid "How many times should travelmate try to connect to an Uplink."
+msgid ""
+"How long should travelmate wait for a successful wlan uplink connection."
 msgstr ""
 
 msgid "Identity"
@@ -150,6 +165,11 @@ msgstr ""
 msgid "Manual Rescan"
 msgstr ""
 
+msgid ""
+"Minimum signal quality threshold as percent for conditional uplink (dis-) "
+"connections."
+msgstr ""
+
 msgid "Move down"
 msgstr ""
 
@@ -208,6 +228,9 @@ msgstr ""
 msgid "Restrict travelmate to a dedicated radio, e.g. 'radio0'."
 msgstr ""
 
+msgid "Retry limit to connect to an uplink."
+msgstr ""
+
 msgid "Runtime Information"
 msgstr ""
 
@@ -223,6 +246,9 @@ msgstr ""
 msgid "Scan"
 msgstr ""
 
+msgid "Signal Quality Threshold"
+msgstr ""
+
 msgid "Signal strength"
 msgstr ""
 
@@ -263,22 +289,19 @@ msgstr ""
 msgid "Timeout in seconds between retries in 'automatic' mode."
 msgstr ""
 
-msgid "To disable this feature set it to '0' which means unlimited retries."
-msgstr ""
-
 msgid "Travelmate"
 msgstr ""
 
 msgid "Travelmate Logfile"
 msgstr ""
 
-msgid "Travelmate Status"
+msgid "Travelmate Status (Quality)"
 msgstr ""
 
 msgid "Travelmate Version"
 msgstr ""
 
-msgid "Trigger delay"
+msgid "Trigger Delay"
 msgstr ""
 
 msgid "Unknown"
@@ -327,20 +350,8 @@ msgid ""
 "add it to the wan zone of the firewall. This step has only to be done once."
 msgstr ""
 
-msgid "connected"
-msgstr ""
-
-msgid "error"
-msgstr ""
-
 msgid "hidden"
 msgstr ""
 
 msgid "n/a"
 msgstr ""
-
-msgid "not connected"
-msgstr ""
-
-msgid "running"
-msgstr ""