summaryrefslogtreecommitdiffhomepage
path: root/dhcpv6
AgeCommit message (Collapse)Author
2020-03-09Merge branch 'master' into write16Pablo Mazzini
2020-03-09Merge branch 'master' into write16Pablo Mazzini
2020-03-09Merge branch 'master' into feature/dhcp4-o-dhcp6Pablo Mazzini
2020-03-09v6: add IA AddressOptions (StatusCode only)Chris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-09netconf: use new IANA and IAAddress gettersChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-09v6: add IdentityOptionsChris Koch
IANA and IATA options may contain Status Code and IAAddr options. Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-06dhcpv6: always write 16-byte IPsChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-06[dhcpv6] More getters for MessageOptionsAndrea Barberio
Added IAAddress, OneIAAddress, UserClasses, VendorOpts, and changed Options to MessageOptions in IA_NA and IA_Address options. Signed-off-by: Andrea Barberio <insomniac@slackware.it>
2020-03-06dhcpv6: add DHCPv4-over-DHCPv6 supportMikael Magnusson
Add message types, options, and modifier for handling DHCPv4-over-DHCPv6. Refer to RFC 7341 Signed-off-by: Mikael Magnusson <mikma@users.sourceforge.net>
2020-03-05nclient6: allow non-rapid responses to RapidSolicitChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: DomainSearchList getterChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: add FQDN option getterChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: add IAPD getterChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: merge multiple OptionOROsChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: add BootFileParam getterChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: add ElapsedTime getterChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: add BootFileURL getterChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: add DNS getter (and rename DNSRecursiveNameServer to DNS)Chris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: simplify GetTransactionIDChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: RequestedOptions getterChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: clean up option NIIChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: Status getter for message optionsChris Koch
Status Code is one of the few options used across many Option types. Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: add IANA GetterChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: add ServerID getterChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05v6: add ClientID getterChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-05dhcpv6: intro Getters for OptionsChris Koch
Allow the Options type to have getters for each specific options, in order to avoid users having to cast options to their specific type. This commit introduces a getter for exactly one option: the ClientArchType. i.e. users can replace archTypes := msg.GetOneOption(OptionClientArchType).(*OptClientArchType) with archTypes := msg.Options.ArchTypes() Because a few message types and options embed options (normal message, relay message, IANA/IATA option) and each have a restricted set of options that can be used inside them, we'll introduce at least 3 or more Options subtypes: - MessageOptions - RelayOptions - IdentityOptions Perhaps others will join at a later time, such as VendorOptions or AddressOptions for the IAAddress options field. Signed-off-by: Chris Koch <chrisko@google.com>
2020-03-04dhcpv6: allow using OptIAPrefix without initializingMikael Magnusson
Set the IPv6 prefix field to zero if the prefix is invalid or not initialized. Signed-off-by: Mikael Magnusson <mikma@users.sourceforge.net>
2020-02-21nclient6: listen on link-local addrChris K
This allows for multi-NIC DHCPv6 in parallel. Otherwise: 2020/02/20 05:01:34 Could not configure eth1 for IPv6: listen udp6 %eth1:546: bind: address already in use 2020/02/20 05:01:34 Could not configure eth4 for IPv6: listen udp6 %eth4:546: bind: address already in use 2020/02/20 05:01:34 Attempting to get DHCPv6 lease on eth2 2020/02/20 05:01:34 Could not configure eth0 for IPv6: listen udp6 %eth0:546: bind: address already in use 2020/02/20 05:01:34 Could not configure eth3 for IPv6: listen udp6 %eth3:546: bind: address already in use Signed-off-by: Chris Koch <chrisko@google.com>
2020-02-06hcpv6 fqdn: implements OptionFQDN optionXuehao (David) Hu
per https://tools.ietf.org/rfc/rfc4704.txt Signed-off-by: Xuehao (David) Hu <xuehaohu@google.com>
2020-01-02v6: give proper names to some common OptionCodesChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2020-01-02v6: use time.Duration for duration fieldsChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2019-12-12[dhcpv6] Add option BootfileParam to DHCPv6 clientDmitrii Okunev
Added support of option OptBootFileParam. See RFC5970 section 3.2. Signed-off-by: Dmitrii Okunev <xaionaro@fb.com>
2019-11-12[dhcpv6]Adding opt 16 when parsing vendor optionsAkshay Navale
Signed-off-by: Akshay Navale <navale@dhcp-172-27-23-219.dhcp.thefacebook.com>
2019-11-03dhcpv6: Add support for 4RD optionsAnatole Denis
IPv4 Residual Deployment (4RD) is a strategy for providing IPv4 connectivity in IPv6-only networks. The standard includes autoconfiguration via DHCPv6, as described in RFC7600. This adds support for the 3 options defined in that RFC Signed-off-by: Anatole Denis <natolumin@unverle.fr>
2019-11-03dhcpv6: Add all current option codes from IANAAnatole Denis
This updates the option codes list in dhcpv6/types.go to include all published option codes as of today. For better formatting of the table, replace comments indicating undefined options with assignments to the throwaway variable `_`, which avoids resetting alignment formatting compared to the comment option. Signed-off-by: Anatole Denis <natolumin@unverle.fr>
2019-10-08iana: HWType is 16 bitsAnatole Denis
In both ARP and DHCPv6, the hwtype field is 16bits, and the IANA table has allocated values >255. (Bootp however uses 1byte so it can't represent everything) This was discovered by fuzzing, as it causes round-trip mismatches; eg with this packet (quoted string): "0000\x00\x01\x00\x0e\x00\x01000000000000" Input: 303030300001000e0001303030303030303030303030 Round-trip: 303030300001000e0001003030303030303030303030 ^ The upper byte of the hwaddress is set to 0 Signed-off-by: Anatole Denis <natolumin@unverle.fr>
2019-10-08dhcpv6: Add error checks to message parsersAnatole Denis
There were missing error checks in the Message and RelayMessage parsers, so that truncated headers would be incorrectly accepted as valid messages. For example the single byte "0" (0x30) would be accepted as a valid message, then reserialized to 0x30,0x00,0x00,0x00,0x00 Signed-off-by: Anatole Denis <natolumin@unverle.fr>
2019-10-08dhcpv6: Reject empty messagesAnatole Denis
The uio library doesn't report errors on a per-operation basis, but accumulates them so they can be checked after a batch of operations in a separate Error() function. Unfortunately this makes it easy to forget, thus parse incorrect messages go-fuzz found immediately that an empty message would be parsed without error, and reserialize to a different message (one with some bytes of zeros) Signed-off-by: Anatole Denis <natolumin@unverle.fr>
2019-10-07dhcpv6: Add a fuzzing entrypoint for go-fuzzAnatole Denis
This adds the required function for running [go-fuzz](https://github.com/dvyukov/go-fuzz) on the dhcpv6 library. It tests the following behaviour: * Parsing messages doesn't crash * Parsed messages are identical after being serialized and deserialized Signed-off-by: Anatole Denis <natolumin@unverle.fr>
2019-10-01server{4,6}: Return UDPConn from NewIPv*UDPConnAnatole Denis
The concrete type under the interface is known here since we create the connection in the same function. Since *net.UDPConn implements net.PacketConn anyway, returning the concrete type here is more powerful and less risky than having downstream users cast the value themselves There should be no code change for downstream users, with the exception of explicit casts (`udpc := conn.(*net.UDPConn)`), which can simply be removed Signed-off-by: Anatole Denis <natolumin@unverle.fr>
2019-09-25dhcpv6: simplify boot file URLChris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2019-09-25server6: allow nil IP in addition to unspecifiedChris K
Signed-off-by: Chris Koch <chrisko@google.com>
2019-09-24nclient6: copy & paste log infra to v6Chris Koch
Signed-off-by: Chris Koch <chrisko@google.com>
2019-09-18server6: Create UDP conn manually for more controlAnatole Denis
Similar to server4 where the UDP connection is manually created using the socket interfaces, this creates a connection with adequate options: * SO_BINDTODEVICE or equivalent if an interface is requested * V6ONLY when supported by the operating system * Allows binding to a multicast address specifically instead of falling back to wildcard Signed-off-by: Anatole Denis <natolumin@unverle.fr>
2019-09-17server6: Fix listening on multicast addressesAnatole Denis
Joining a multicast group with an address that can't be received on a socket is ineffective, at least on linux. This updates the logic of NewServer in a mostly backwards-compatible way, to enable listening on arbitrary multicast addresses: * Unicast addresses see no user-visible change, but don't join a multicast group for which they don't receive traffic anyway * Multicast addresses start actually receiving traffic for the group they represent, and don't join the default group. **this is a behaviour change**: previously they would receive traffic for the default group if it was on the same port and **not** for the group they represent. I consider that previous behaviour a bug * Wildcard addresses, if on the proper port, will join both AllDHCPRelayAgentsAndServers and AllDHCPServers **this is a behaviour change**: previously only AllDHCPRelayAgentsAndServers was joined * Wildcard addresses on another port: no visible change, same as unicast case Signed-off-by: Anatole Denis <natolumin@unverle.fr>
2019-07-22Fixed unnecessary conversions in dhcpv6 (#305)Christian Muehlhaeuser
No need to convert here.
2019-05-09Adding RemoteID option while creating a Relayed Encapsulated Packet (#282)Akshay Navale
2019-05-08Addressed more linter warningsAndrea Barberio
Mostly addressed missing error checking. Signed-off-by: Andrea Barberio <insomniac@slackware.it>
2019-05-08Addressed various linter warningsAndrea Barberio
Mostly for dead code and potentially wrong comparisons. Signed-off-by: Andrea Barberio <insomniac@slackware.it>
2019-05-02[dhcpv6] Handle SOLICIT with rapid commit in NewReplyFromMessageAndrea Barberio
NewReplyFromMessage creates a reply from a message. With this patch it can handle Solicit messages with rapid-commit. RFC3315 states that: ``` If the client has included a Rapid Commit option in its Solicit message, the client terminates the waiting process as soon as a Reply message with a Rapid Commit option is received. ``` Signed-off-by: Andrea Barberio <insomniac@slackware.it>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 06:54:46 +0000