path: root/pkg/cpuid/cpuid_x86.go

// Copyright 2019 The gVisor Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

// +build i386 amd64

package cpuid

import (
	"bytes"
	"fmt"
	"io/ioutil"
	"strconv"
	"strings"

	"gvisor.dev/gvisor/pkg/log"
)

// Common references for CPUID leaves and bits:
//
// Intel:
//   * Intel SDM Volume 2, Chapter 3.2 "CPUID" (more up-to-date)
//   * Intel Application Note 485 (more detailed)
//
// AMD:
//   * AMD64 APM Volume 3, Appendix 3 "Obtaining Processor Information ..."

// block is a collection of 32 Feature bits.
type block int

const blockSize = 32

// Feature bits are numbered according to "blocks". Each block is 32 bits, and
// feature bits from the same source (cpuid leaf/level) are in the same block.
func featureID(b block, bit int) Feature {
	return Feature(32*int(b) + bit)
}

// Block 0 constants are all of the "basic" feature bits returned by a cpuid in
// ecx with eax=1.
const (
	X86FeatureSSE3 Feature = iota
	X86FeaturePCLMULDQ
	X86FeatureDTES64
	X86FeatureMONITOR
	X86FeatureDSCPL
	X86FeatureVMX
	X86FeatureSMX
	X86FeatureEST
	X86FeatureTM2
	X86FeatureSSSE3 // Not a typo, "supplemental" SSE3.
	X86FeatureCNXTID
	X86FeatureSDBG
	X86FeatureFMA
	X86FeatureCX16
	X86FeatureXTPR
	X86FeaturePDCM
	_ // ecx bit 16 is reserved.
	X86FeaturePCID
	X86FeatureDCA
	X86FeatureSSE4_1
	X86FeatureSSE4_2
	X86FeatureX2APIC
	X86FeatureMOVBE
	X86FeaturePOPCNT
	X86FeatureTSCD
	X86FeatureAES
	X86FeatureXSAVE
	X86FeatureOSXSAVE
	X86FeatureAVX
	X86FeatureF16C
	X86FeatureRDRAND
	_ // ecx bit 31 is reserved.
)

// Block 1 constants are all of the "basic" feature bits returned by a cpuid in
// edx with eax=1.
const (
	X86FeatureFPU Feature = 32 + iota
	X86FeatureVME
	X86FeatureDE
	X86FeaturePSE
	X86FeatureTSC
	X86FeatureMSR
	X86FeaturePAE
	X86FeatureMCE
	X86FeatureCX8
	X86FeatureAPIC
	_ // edx bit 10 is reserved.
	X86FeatureSEP
	X86FeatureMTRR
	X86FeaturePGE
	X86FeatureMCA
	X86FeatureCMOV
	X86FeaturePAT
	X86FeaturePSE36
	X86FeaturePSN
	X86FeatureCLFSH
	_ // edx bit 20 is reserved.
	X86FeatureDS
	X86FeatureACPI
	X86FeatureMMX
	X86FeatureFXSR
	X86FeatureSSE
	X86FeatureSSE2
	X86FeatureSS
	X86FeatureHTT
	X86FeatureTM
	X86FeatureIA64
	X86FeaturePBE
)

// Block 2 bits are the "structured extended" features returned in ebx for
// eax=7, ecx=0.
const (
	X86FeatureFSGSBase Feature = 2*32 + iota
	X86FeatureTSC_ADJUST
	_ // ebx bit 2 is reserved.
	X86FeatureBMI1
	X86FeatureHLE
	X86FeatureAVX2
	X86FeatureFDP_EXCPTN_ONLY
	X86FeatureSMEP
	X86FeatureBMI2
	X86FeatureERMS
	X86FeatureINVPCID
	X86FeatureRTM
	X86FeatureCQM
	X86FeatureFPCSDS
	X86FeatureMPX
	X86FeatureRDT
	X86FeatureAVX512F
	X86FeatureAVX512DQ
	X86FeatureRDSEED
	X86FeatureADX
	X86FeatureSMAP
	X86FeatureAVX512IFMA
	X86FeaturePCOMMIT
	X86FeatureCLFLUSHOPT
	X86FeatureCLWB
	X86FeatureIPT // Intel processor trace.
	X86FeatureAVX512PF
	X86FeatureAVX512ER
	X86FeatureAVX512CD
	X86FeatureSHA
	X86FeatureAVX512BW
	X86FeatureAVX512VL
)

// Block 3 bits are the "extended" features returned in ecx for eax=7, ecx=0.
const (
	X86FeaturePREFETCHWT1 Feature = 3*32 + iota
	X86FeatureAVX512VBMI
	X86FeatureUMIP
	X86FeaturePKU
	X86FeatureOSPKE
	X86FeatureWAITPKG
	X86FeatureAVX512_VBMI2
	_ // ecx bit 7 is reserved
	X86FeatureGFNI
	X86FeatureVAES
	X86FeatureVPCLMULQDQ
	X86FeatureAVX512_VNNI
	X86FeatureAVX512_BITALG
	X86FeatureTME
	X86FeatureAVX512_VPOPCNTDQ
	_ // ecx bit 15 is reserved
	X86FeatureLA57
	// ecx bits 17-21 are reserved
	_
	_
	_
	_
	_
	X86FeatureRDPID
	// ecx bits 23-24 are reserved
	_
	_
	X86FeatureCLDEMOTE
	_ // ecx bit 26 is reserved
	X86FeatureMOVDIRI
	X86FeatureMOVDIR64B
)

// Block 4 constants are for xsave capabilities in CPUID.(EAX=0DH,ECX=01H):EAX.
// The CPUID leaf is available only if 'X86FeatureXSAVE' is present.
const (
	X86FeatureXSAVEOPT Feature = 4*32 + iota
	X86FeatureXSAVEC
	X86FeatureXGETBV1
	X86FeatureXSAVES
	// EAX[31:4] are reserved.
)

// Block 5 constants are the extended feature bits in
// CPUID.(EAX=0x80000001):ECX.
const (
	X86FeatureLAHF64 Feature = 5*32 + iota
	X86FeatureCMP_LEGACY
	X86FeatureSVM
	X86FeatureEXTAPIC
	X86FeatureCR8_LEGACY
	X86FeatureLZCNT
	X86FeatureSSE4A
	X86FeatureMISALIGNSSE
	X86FeaturePREFETCHW
	X86FeatureOSVW
	X86FeatureIBS
	X86FeatureXOP
	X86FeatureSKINIT
	X86FeatureWDT
	_ // ecx bit 14 is reserved.
	X86FeatureLWP
	X86FeatureFMA4
	X86FeatureTCE
	_ // ecx bit 18 is reserved.
	_ // ecx bit 19 is reserved.
	_ // ecx bit 20 is reserved.
	X86FeatureTBM
	X86FeatureTOPOLOGY
	X86FeaturePERFCTR_CORE
	X86FeaturePERFCTR_NB
	_ // ecx bit 25 is reserved.
	X86FeatureBPEXT
	X86FeaturePERFCTR_TSC
	X86FeaturePERFCTR_LLC
	X86FeatureMWAITX
	// TODO(b/152776797): Some CPUs set this but it is not documented anywhere.
	X86FeatureBlock5Bit30
	_ // ecx bit 31 is reserved.
)

// Block 6 constants are the extended feature bits in
// CPUID.(EAX=0x80000001):EDX.
//
// These are sparse, and so the bit positions are assigned manually.
const (
	// On AMD, EDX[24:23] | EDX[17:12] | EDX[9:0] are duplicate features
	// also defined in block 1 (in identical bit positions). Those features
	// are not listed here.
	block6DuplicateMask = 0x183f3ff

	X86FeatureSYSCALL  Feature = 6*32 + 11
	X86FeatureNX       Feature = 6*32 + 20
	X86FeatureMMXEXT   Feature = 6*32 + 22
	X86FeatureFXSR_OPT Feature = 6*32 + 25
	X86FeatureGBPAGES  Feature = 6*32 + 26
	X86FeatureRDTSCP   Feature = 6*32 + 27
	X86FeatureLM       Feature = 6*32 + 29
	X86Feature3DNOWEXT Feature = 6*32 + 30
	X86Feature3DNOW    Feature = 6*32 + 31
)

// linuxBlockOrder defines the order in which linux organizes the feature
// blocks. Linux also tracks feature bits in 32-bit blocks, but in an order
// which doesn't match well here, so for the /proc/cpuinfo generation we simply
// re-map the blocks to Linux's ordering and then go through the bits in each
// block.
var linuxBlockOrder = []block{1, 6, 0, 5, 2, 4, 3}

// To make emulation of /proc/cpuinfo easy, these names match the names of the
// basic features in Linux defined in arch/x86/kernel/cpu/capflags.c.
var x86FeatureStrings = map[Feature]string{
	// Block 0.
	X86FeatureSSE3:     "pni",
	X86FeaturePCLMULDQ: "pclmulqdq",
	X86FeatureDTES64:   "dtes64",
	X86FeatureMONITOR:  "monitor",
	X86FeatureDSCPL:    "ds_cpl",
	X86FeatureVMX:      "vmx",
	X86FeatureSMX:      "smx",
	X86FeatureEST:      "est",
	X86FeatureTM2:      "tm2",
	X86FeatureSSSE3:    "ssse3",
	X86FeatureCNXTID:   "cid",
	X86FeatureSDBG:     "sdbg",
	X86FeatureFMA:      "fma",
	X86FeatureCX16:     "cx16",
	X86FeatureXTPR:     "xtpr",
	X86FeaturePDCM:     "pdcm",
	X86FeaturePCID:     "pcid",
	X86FeatureDCA:      "dca",
	X86FeatureSSE4_1:   "sse4_1",
	X86FeatureSSE4_2:   "sse4_2",
	X86FeatureX2APIC:   "x2apic",
	X86FeatureMOVBE:    "movbe",
	X86FeaturePOPCNT:   "popcnt",
	X86FeatureTSCD:     "tsc_deadline_timer",
	X86FeatureAES:      "aes",
	X86FeatureXSAVE:    "xsave",
	X86FeatureAVX:      "avx",
	X86FeatureF16C:     "f16c",
	X86FeatureRDRAND:   "rdrand",

	// Block 1.
	X86FeatureFPU:   "fpu",
	X86FeatureVME:   "vme",
	X86FeatureDE:    "de",
	X86FeaturePSE:   "pse",
	X86FeatureTSC:   "tsc",
	X86FeatureMSR:   "msr",
	X86FeaturePAE:   "pae",
	X86FeatureMCE:   "mce",
	X86FeatureCX8:   "cx8",
	X86FeatureAPIC:  "apic",
	X86FeatureSEP:   "sep",
	X86FeatureMTRR:  "mtrr",
	X86FeaturePGE:   "pge",
	X86FeatureMCA:   "mca",
	X86FeatureCMOV:  "cmov",
	X86FeaturePAT:   "pat",
	X86FeaturePSE36: "pse36",
	X86FeaturePSN:   "pn",
	X86FeatureCLFSH: "clflush",
	X86FeatureDS:    "dts",
	X86FeatureACPI:  "acpi",
	X86FeatureMMX:   "mmx",
	X86FeatureFXSR:  "fxsr",
	X86FeatureSSE:   "sse",
	X86FeatureSSE2:  "sse2",
	X86FeatureSS:    "ss",
	X86FeatureHTT:   "ht",
	X86FeatureTM:    "tm",
	X86FeatureIA64:  "ia64",
	X86FeaturePBE:   "pbe",

	// Block 2.
	X86FeatureFSGSBase:   "fsgsbase",
	X86FeatureTSC_ADJUST: "tsc_adjust",
	X86FeatureBMI1:       "bmi1",
	X86FeatureHLE:        "hle",
	X86FeatureAVX2:       "avx2",
	X86FeatureSMEP:       "smep",
	X86FeatureBMI2:       "bmi2",
	X86FeatureERMS:       "erms",
	X86FeatureINVPCID:    "invpcid",
	X86FeatureRTM:        "rtm",
	X86FeatureCQM:        "cqm",
	X86FeatureMPX:        "mpx",
	X86FeatureRDT:        "rdt_a",
	X86FeatureAVX512F:    "avx512f",
	X86FeatureAVX512DQ:   "avx512dq",
	X86FeatureRDSEED:     "rdseed",
	X86FeatureADX:        "adx",
	X86FeatureSMAP:       "smap",
	X86FeatureCLWB:       "clwb",
	X86FeatureAVX512PF:   "avx512pf",
	X86FeatureAVX512ER:   "avx512er",
	X86FeatureAVX512CD:   "avx512cd",
	X86FeatureSHA:        "sha_ni",
	X86FeatureAVX512BW:   "avx512bw",
	X86FeatureAVX512VL:   "avx512vl",

	// Block 3.
	X86FeatureAVX512VBMI:       "avx512vbmi",
	X86FeatureUMIP:             "umip",
	X86FeaturePKU:              "pku",
	X86FeatureOSPKE:            "ospke",
	X86FeatureWAITPKG:          "waitpkg",
	X86FeatureAVX512_VBMI2:     "avx512_vbmi2",
	X86FeatureGFNI:             "gfni",
	X86FeatureVAES:             "vaes",
	X86FeatureVPCLMULQDQ:       "vpclmulqdq",
	X86FeatureAVX512_VNNI:      "avx512_vnni",
	X86FeatureAVX512_BITALG:    "avx512_bitalg",
	X86FeatureTME:              "tme",
	X86FeatureAVX512_VPOPCNTDQ: "avx512_vpopcntdq",
	X86FeatureLA57:             "la57",
	X86FeatureRDPID:            "rdpid",
	X86FeatureCLDEMOTE:         "cldemote",
	X86FeatureMOVDIRI:          "movdiri",
	X86FeatureMOVDIR64B:        "movdir64b",

	// Block 4.
	X86FeatureXSAVEOPT: "xsaveopt",
	X86FeatureXSAVEC:   "xsavec",
	X86FeatureXGETBV1:  "xgetbv1",
	X86FeatureXSAVES:   "xsaves",

	// Block 5.
	X86FeatureLAHF64:       "lahf_lm", // LAHF/SAHF in long mode
	X86FeatureCMP_LEGACY:   "cmp_legacy",
	X86FeatureSVM:          "svm",
	X86FeatureEXTAPIC:      "extapic",
	X86FeatureCR8_LEGACY:   "cr8_legacy",
	X86FeatureLZCNT:        "abm", // Advanced bit manipulation
	X86FeatureSSE4A:        "sse4a",
	X86FeatureMISALIGNSSE:  "misalignsse",
	X86FeaturePREFETCHW:    "3dnowprefetch",
	X86FeatureOSVW:         "osvw",
	X86FeatureIBS:          "ibs",
	X86FeatureXOP:          "xop",
	X86FeatureSKINIT:       "skinit",
	X86FeatureWDT:          "wdt",
	X86FeatureLWP:          "lwp",
	X86FeatureFMA4:         "fma4",
	X86FeatureTCE:          "tce",
	X86FeatureTBM:          "tbm",
	X86FeatureTOPOLOGY:     "topoext",
	X86FeaturePERFCTR_CORE: "perfctr_core",
	X86FeaturePERFCTR_NB:   "perfctr_nb",
	X86FeatureBPEXT:        "bpext",
	X86FeaturePERFCTR_TSC:  "ptsc",
	X86FeaturePERFCTR_LLC:  "perfctr_llc",
	X86FeatureMWAITX:       "mwaitx",

	// Block 6.
	X86FeatureSYSCALL:  "syscall",
	X86FeatureNX:       "nx",
	X86FeatureMMXEXT:   "mmxext",
	X86FeatureFXSR_OPT: "fxsr_opt",
	X86FeatureGBPAGES:  "pdpe1gb",
	X86FeatureRDTSCP:   "rdtscp",
	X86FeatureLM:       "lm",
	X86Feature3DNOWEXT: "3dnowext",
	X86Feature3DNOW:    "3dnow",
}

// These flags are parse only---they can be used for setting / unsetting the
// flags, but will not get printed out in /proc/cpuinfo.
var x86FeatureParseOnlyStrings = map[Feature]string{
	// Block 0.
	X86FeatureOSXSAVE: "osxsave",

	// Block 2.
	X86FeatureFDP_EXCPTN_ONLY: "fdp_excptn_only",
	X86FeatureFPCSDS:          "fpcsds",
	X86FeatureIPT:             "pt",
	X86FeatureCLFLUSHOPT:      "clfushopt",

	// Block 3.
	X86FeaturePREFETCHWT1: "prefetchwt1",

	// Block 5.
	X86FeatureBlock5Bit30: "block5_bit30",
}

// intelCacheDescriptors describe the caches and TLBs on the system. They are
// returned in the registers for eax=2. Intel only.
type intelCacheDescriptor uint8

// Valid cache/TLB descriptors. All descriptors can be found in Intel SDM Vol.
// 2, Ch. 3.2, "CPUID", Table 3-12 "Encoding of CPUID Leaf 2 Descriptors".
const (
	intelNullDescriptor    intelCacheDescriptor = 0
	intelNoTLBDescriptor   intelCacheDescriptor = 0xfe
	intelNoCacheDescriptor intelCacheDescriptor = 0xff

	// Most descriptors omitted for brevity as they are currently unused.
)

// CacheType describes the type of a cache, as returned in eax[4:0] for eax=4.
type CacheType uint8

const (
	// cacheNull indicates that there are no more entries.
	cacheNull CacheType = iota

	// CacheData is a data cache.
	CacheData

	// CacheInstruction is an instruction cache.
	CacheInstruction

	// CacheUnified is a unified instruction and data cache.
	CacheUnified
)

// Cache describes the parameters of a single cache on the system.
//
// +stateify savable
type Cache struct {
	// Level is the hierarchical level of this cache (L1, L2, etc).
	Level uint32

	// Type is the type of cache.
	Type CacheType

	// FullyAssociative indicates that entries may be placed in any block.
	FullyAssociative bool

	// Partitions is the number of physical partitions in the cache.
	Partitions uint32

	// Ways is the number of ways of associativity in the cache.
	Ways uint32

	// Sets is the number of sets in the cache.
	Sets uint32

	// InvalidateHierarchical indicates that WBINVD/INVD from threads
	// sharing this cache acts upon lower level caches for threads sharing
	// this cache.
	InvalidateHierarchical bool

	// Inclusive indicates that this cache is inclusive of lower cache
	// levels.
	Inclusive bool

	// DirectMapped indicates that this cache is directly mapped from
	// address, rather than using a hash function.
	DirectMapped bool
}

// Just a way to wrap cpuid function numbers.
type cpuidFunction uint32

// The constants below are the lower or "standard" cpuid functions, ordered as
// defined by the hardware.
const (
	vendorID                      cpuidFunction = iota // Returns vendor ID and largest standard function.
	featureInfo                                        // Returns basic feature bits and processor signature.
	intelCacheDescriptors                              // Returns list of cache descriptors. Intel only.
	intelSerialNumber                                  // Returns processor serial number (obsolete on new hardware). Intel only.
	intelDeterministicCacheParams                      // Returns deterministic cache information. Intel only.
	monitorMwaitParams                                 // Returns information about monitor/mwait instructions.
	powerParams                                        // Returns information about power management and thermal sensors.
	extendedFeatureInfo                                // Returns extended feature bits.
	_                                                  // Function 0x8 is reserved.
	intelDCAParams                                     // Returns direct cache access information. Intel only.
	intelPMCInfo                                       // Returns information about performance monitoring features. Intel only.
	intelX2APICInfo                                    // Returns core/logical processor topology. Intel only.
	_                                                  // Function 0xc is reserved.
	xSaveInfo                                          // Returns information about extended state management.
)

// The "extended" functions start at 0x80000000.
const (
	extendedFunctionInfo cpuidFunction = 0x80000000 + iota // Returns highest available extended function in eax.
	extendedFeatures                                       // Returns some extended feature bits in edx and ecx.
)

// These are the extended floating point state features. They are used to
// enumerate floating point features in XCR0, XSTATE_BV, etc.
const (
	XSAVEFeatureX87         = 1 << 0
	XSAVEFeatureSSE         = 1 << 1
	XSAVEFeatureAVX         = 1 << 2
	XSAVEFeatureBNDREGS     = 1 << 3
	XSAVEFeatureBNDCSR      = 1 << 4
	XSAVEFeatureAVX512op    = 1 << 5
	XSAVEFeatureAVX512zmm0  = 1 << 6
	XSAVEFeatureAVX512zmm16 = 1 << 7
	XSAVEFeaturePKRU        = 1 << 9
)

var cpuFreqMHz float64

// x86FeaturesFromString includes features from x86FeatureStrings and
// x86FeatureParseOnlyStrings.
var x86FeaturesFromString = make(map[string]Feature)

// FeatureFromString returns the Feature associated with the given feature
// string plus a bool to indicate if it could find the feature.
func FeatureFromString(s string) (Feature, bool) {
	f, b := x86FeaturesFromString[s]
	return f, b
}

// String implements fmt.Stringer.
func (f Feature) String() string {
	if s := f.flagString(false); s != "" {
		return s
	}

	block := int(f) / 32
	bit := int(f) % 32
	return fmt.Sprintf("<cpuflag %d; block %d bit %d>", f, block, bit)
}

func (f Feature) flagString(cpuinfoOnly bool) string {
	if s, ok := x86FeatureStrings[f]; ok {
		return s
	}
	if !cpuinfoOnly {
		return x86FeatureParseOnlyStrings[f]
	}
	return ""
}

// FeatureSet is a set of Features for a CPU.
//
// +stateify savable
type FeatureSet struct {
	// Set is the set of features that are enabled in this FeatureSet.
	Set map[Feature]bool

	// VendorID is the 12-char string returned in ebx:edx:ecx for eax=0.
	VendorID string

	// ExtendedFamily is part of the processor signature.
	ExtendedFamily uint8

	// ExtendedModel is part of the processor signature.
	ExtendedModel uint8

	// ProcessorType is part of the processor signature.
	ProcessorType uint8

	// Family is part of the processor signature.
	Family uint8

	// Model is part of the processor signature.
	Model uint8

	// SteppingID is part of the processor signature.
	SteppingID uint8

	// Caches describes the caches on the CPU.
	Caches []Cache

	// CacheLine is the size of a cache line in bytes.
	//
	// All caches use the same line size. This is not enforced in the CPUID
	// encoding, but is true on all known x86 processors.
	CacheLine uint32
}

// FlagsString prints out supported CPU flags. If cpuinfoOnly is true, it is
// equivalent to the "flags" field in /proc/cpuinfo.
func (fs *FeatureSet) FlagsString(cpuinfoOnly bool) string {
	var s []string
	for _, b := range linuxBlockOrder {
		for i := 0; i < blockSize; i++ {
			if f := featureID(b, i); fs.Set[f] {
				if fstr := f.flagString(cpuinfoOnly); fstr != "" {
					s = append(s, fstr)
				}
			}
		}
	}
	return strings.Join(s, " ")
}

// WriteCPUInfoTo is to generate a section of one cpu in /proc/cpuinfo. This is
// a minimal /proc/cpuinfo, it is missing some fields like "microcode" that are
// not always printed in Linux. The bogomips field is simply made up.
func (fs FeatureSet) WriteCPUInfoTo(cpu uint, b *bytes.Buffer) {
	fmt.Fprintf(b, "processor\t: %d\n", cpu)
	fmt.Fprintf(b, "vendor_id\t: %s\n", fs.VendorID)
	fmt.Fprintf(b, "cpu family\t: %d\n", ((fs.ExtendedFamily<<4)&0xff)|fs.Family)
	fmt.Fprintf(b, "model\t\t: %d\n", ((fs.ExtendedModel<<4)&0xff)|fs.Model)
	fmt.Fprintf(b, "model name\t: %s\n", "unknown") // Unknown for now.
	fmt.Fprintf(b, "stepping\t: %s\n", "unknown")   // Unknown for now.
	fmt.Fprintf(b, "cpu MHz\t\t: %.3f\n", cpuFreqMHz)
	fmt.Fprintln(b, "fpu\t\t: yes")
	fmt.Fprintln(b, "fpu_exception\t: yes")
	fmt.Fprintf(b, "cpuid level\t: %d\n", uint32(xSaveInfo)) // Same as ax in vendorID.
	fmt.Fprintln(b, "wp\t\t: yes")
	fmt.Fprintf(b, "flags\t\t: %s\n", fs.FlagsString(true))
	fmt.Fprintf(b, "bogomips\t: %.02f\n", cpuFreqMHz) // It's bogus anyway.
	fmt.Fprintf(b, "clflush size\t: %d\n", fs.CacheLine)
	fmt.Fprintf(b, "cache_alignment\t: %d\n", fs.CacheLine)
	fmt.Fprintf(b, "address sizes\t: %d bits physical, %d bits virtual\n", 46, 48)
	fmt.Fprintln(b, "power management:") // This is always here, but can be blank.
	fmt.Fprintln(b, "")                  // The /proc/cpuinfo file ends with an extra newline.
}

const (
	amdVendorID   = "AuthenticAMD"
	intelVendorID = "GenuineIntel"
)

// AMD returns true if fs describes an AMD CPU.
func (fs *FeatureSet) AMD() bool {
	return fs.VendorID == amdVendorID
}

// Intel returns true if fs describes an Intel CPU.
func (fs *FeatureSet) Intel() bool {
	return fs.VendorID == intelVendorID
}

// ErrIncompatible is returned by FeatureSet.HostCompatible if fs is not a
// subset of the host feature set.
type ErrIncompatible struct {
	message string
}

// Error implements error.
func (e ErrIncompatible) Error() string {
	return e.message
}

// CheckHostCompatible returns nil if fs is a subset of the host feature set.
func (fs *FeatureSet) CheckHostCompatible() error {
	hfs := HostFeatureSet()

	if diff := fs.Subtract(hfs); diff != nil {
		return ErrIncompatible{fmt.Sprintf("CPU feature set %v incompatible with host feature set %v (missing: %v)", fs.FlagsString(false), hfs.FlagsString(false), diff)}
	}

	// The size of a cache line must match, as it is critical to correctly
	// utilizing CLFLUSH. Other cache properties are allowed to change, as
	// they are not important to correctness.
	if fs.CacheLine != hfs.CacheLine {
		return ErrIncompatible{fmt.Sprintf("CPU cache line size %d incompatible with host cache line size %d", fs.CacheLine, hfs.CacheLine)}
	}

	return nil
}

// Helper to convert 3 regs into 12-byte vendor ID.
func vendorIDFromRegs(bx, cx, dx uint32) string {
	bytes := make([]byte, 0, 12)
	for i := uint(0); i < 4; i++ {
		b := byte(bx >> (i * 8))
		bytes = append(bytes, b)
	}

	for i := uint(0); i < 4; i++ {
		b := byte(dx >> (i * 8))
		bytes = append(bytes, b)
	}

	for i := uint(0); i < 4; i++ {
		b := byte(cx >> (i * 8))
		bytes = append(bytes, b)
	}
	return string(bytes)
}

var maxXsaveSize = func() uint32 {
	// Leaf 0 of xsaveinfo function returns the size for currently
	// enabled xsave features in ebx, the maximum size if all valid
	// features are saved with xsave in ecx, and valid XCR0 bits in
	// edx:eax.
	//
	// If xSaveInfo isn't supported, cpuid will not fault but will
	// return bogus values.
	_, _, maxXsaveSize, _ := HostID(uint32(xSaveInfo), 0)
	return maxXsaveSize
}()

// ExtendedStateSize returns the number of bytes needed to save the "extended
// state" for this processor and the boundary it must be aligned to. Extended
// state includes floating point registers, and other cpu state that's not
// associated with the normal task context.
//
// Note: We can save some space here with an optimization where we use a
// smaller chunk of memory depending on features that are actually enabled.
// Currently we just use the largest possible size for simplicity (which is
// about 2.5K worst case, with avx512).
func (fs *FeatureSet) ExtendedStateSize() (size, align uint) {
	if fs.UseXsave() {
		return uint(maxXsaveSize), 64
	}

	// If we don't support xsave, we fall back to fxsave, which requires
	// 512 bytes aligned to 16 bytes.
	return 512, 16
}

// ValidXCR0Mask returns the bits that may be set to 1 in control register
// XCR0.
func (fs *FeatureSet) ValidXCR0Mask() uint64 {
	if !fs.UseXsave() {
		return 0
	}
	eax, _, _, edx := HostID(uint32(xSaveInfo), 0)
	return uint64(edx)<<32 | uint64(eax)
}

// vendorIDRegs returns the 3 register values used to construct the 12-byte
// vendor ID string for eax=0.
func (fs *FeatureSet) vendorIDRegs() (bx, dx, cx uint32) {
	for i := uint(0); i < 4; i++ {
		bx |= uint32(fs.VendorID[i]) << (i * 8)
	}

	for i := uint(0); i < 4; i++ {
		dx |= uint32(fs.VendorID[i+4]) << (i * 8)
	}

	for i := uint(0); i < 4; i++ {
		cx |= uint32(fs.VendorID[i+8]) << (i * 8)
	}
	return
}

// signature returns the signature dword that's returned in eax when eax=1.
func (fs *FeatureSet) signature() uint32 {
	var s uint32
	s |= uint32(fs.SteppingID & 0xf)
	s |= uint32(fs.Model&0xf) << 4
	s |= uint32(fs.Family&0xf) << 8
	s |= uint32(fs.ProcessorType&0x3) << 12
	s |= uint32(fs.ExtendedModel&0xf) << 16
	s |= uint32(fs.ExtendedFamily&0xff) << 20
	return s
}

// Helper to deconstruct signature dword.
func signatureSplit(v uint32) (ef, em, pt, f, m, sid uint8) {
	sid = uint8(v & 0xf)
	m = uint8(v>>4) & 0xf
	f = uint8(v>>8) & 0xf
	pt = uint8(v>>12) & 0x3
	em = uint8(v>>16) & 0xf
	ef = uint8(v >> 20)
	return
}

// Helper to convert blockwise feature bit masks into a set of features. Masks
// must be provided in order for each block, without skipping them. If a block
// does not matter for this feature set, 0 is specified.
func setFromBlockMasks(blocks ...uint32) map[Feature]bool {
	s := make(map[Feature]bool)
	for b, blockMask := range blocks {
		for i := 0; i < blockSize; i++ {
			if blockMask&1 != 0 {
				s[featureID(block(b), i)] = true
			}
			blockMask >>= 1
		}
	}
	return s
}

// blockMask returns the 32-bit mask associated with a block of features.
func (fs *FeatureSet) blockMask(b block) uint32 {
	var mask uint32
	for i := 0; i < blockSize; i++ {
		if fs.Set[featureID(b, i)] {
			mask |= 1 << uint(i)
		}
	}
	return mask
}

// Remove removes a Feature from a FeatureSet. It ignores features
// that are not in the FeatureSet.
func (fs *FeatureSet) Remove(feature Feature) {
	delete(fs.Set, feature)
}

// Add adds a Feature to a FeatureSet. It ignores duplicate features.
func (fs *FeatureSet) Add(feature Feature) {
	fs.Set[feature] = true
}

// HasFeature tests whether or not a feature is in the given feature set.
func (fs *FeatureSet) HasFeature(feature Feature) bool {
	return fs.Set[feature]
}

// Subtract returns the features present in fs that are not present in other.
// If all features in fs are present in other, Subtract returns nil.
func (fs *FeatureSet) Subtract(other *FeatureSet) (diff map[Feature]bool) {
	for f := range fs.Set {
		if !other.Set[f] {
			if diff == nil {
				diff = make(map[Feature]bool)
			}
			diff[f] = true
		}
	}

	return
}

// EmulateID emulates a cpuid instruction based on the feature set.
func (fs *FeatureSet) EmulateID(origAx, origCx uint32) (ax, bx, cx, dx uint32) {
	switch cpuidFunction(origAx) {
	case vendorID:
		ax = uint32(xSaveInfo) // 0xd (xSaveInfo) is the highest function we support.
		bx, dx, cx = fs.vendorIDRegs()
	case featureInfo:
		// CLFLUSH line size is encoded in quadwords. Other fields in bx unsupported.
		bx = (fs.CacheLine / 8) << 8
		cx = fs.blockMask(block(0))
		dx = fs.blockMask(block(1))
		ax = fs.signature()
	case intelCacheDescriptors:
		if !fs.Intel() {
			// Reserved on non-Intel.
			return 0, 0, 0, 0
		}

		// "The least-significant byte in register EAX (register AL)
		// will always return 01H. Software should ignore this value
		// and not interpret it as an informational descriptor." - SDM
		//
		// We only support reporting cache parameters via
		// intelDeterministicCacheParams; report as much here.
		//
		// We do not support exposing TLB information at all.
		ax = 1 | (uint32(intelNoCacheDescriptor) << 8)
	case intelDeterministicCacheParams:
		if !fs.Intel() {
			// Reserved on non-Intel.
			return 0, 0, 0, 0
		}

		// cx is the index of the cache to describe.
		if int(origCx) >= len(fs.Caches) {
			return uint32(cacheNull), 0, 0, 0
		}
		c := fs.Caches[origCx]

		ax = uint32(c.Type)
		ax |= c.Level << 5
		ax |= 1 << 8 // Always claim the cache is "self-initializing".
		if c.FullyAssociative {
			ax |= 1 << 9
		}
		// Processor topology not supported.

		bx = fs.CacheLine - 1
		bx |= (c.Partitions - 1) << 12
		bx |= (c.Ways - 1) << 22

		cx = c.Sets - 1

		if !c.InvalidateHierarchical {
			dx |= 1
		}
		if c.Inclusive {
			dx |= 1 << 1
		}
		if !c.DirectMapped {
			dx |= 1 << 2
		}
	case xSaveInfo:
		if !fs.UseXsave() {
			return 0, 0, 0, 0
		}
		return HostID(uint32(xSaveInfo), origCx)
	case extendedFeatureInfo:
		if origCx != 0 {
			break // Only leaf 0 is supported.
		}
		bx = fs.blockMask(block(2))
		cx = fs.blockMask(block(3))
	case extendedFunctionInfo:
		// We only support showing the extended features.
		ax = uint32(extendedFeatures)
		cx = 0
	case extendedFeatures:
		cx = fs.blockMask(block(5))
		dx = fs.blockMask(block(6))
		if fs.AMD() {
			// AMD duplicates some block 1 features in block 6.
			dx |= fs.blockMask(block(1)) & block6DuplicateMask
		}
	}

	return
}

// UseXsave returns the choice of fp state saving instruction.
func (fs *FeatureSet) UseXsave() bool {
	return fs.HasFeature(X86FeatureXSAVE) && fs.HasFeature(X86FeatureOSXSAVE)
}

// UseXsaveopt returns true if 'fs' supports the "xsaveopt" instruction.
func (fs *FeatureSet) UseXsaveopt() bool {
	return fs.UseXsave() && fs.HasFeature(X86FeatureXSAVEOPT)
}

// HostID executes a native CPUID instruction.
func HostID(axArg, cxArg uint32) (ax, bx, cx, dx uint32)

// HostFeatureSet uses cpuid to get host values and construct a feature set
// that matches that of the host machine. Note that there are several places
// where there appear to be some unnecessary assignments between register names
// (ax, bx, cx, or dx) and featureBlockN variables. This is to explicitly show
// where the different feature blocks come from, to make the code easier to
// inspect and read.
func HostFeatureSet() *FeatureSet {
	// eax=0 gets max supported feature and vendor ID.
	_, bx, cx, dx := HostID(0, 0)
	vendorID := vendorIDFromRegs(bx, cx, dx)

	// eax=1 gets basic features in ecx:edx.
	ax, bx, cx, dx := HostID(1, 0)
	featureBlock0 := cx
	featureBlock1 := dx
	ef, em, pt, f, m, sid := signatureSplit(ax)
	cacheLine := 8 * (bx >> 8) & 0xff

	// eax=4, ecx=i gets details about cache index i. Only supported on Intel.
	var caches []Cache
	if vendorID == intelVendorID {
		// ecx selects the cache index until a null type is returned.
		for i := uint32(0); ; i++ {
			ax, bx, cx, dx := HostID(4, i)
			t := CacheType(ax & 0xf)
			if t == cacheNull {
				break
			}

			lineSize := (bx & 0xfff) + 1
			if lineSize != cacheLine {
				panic(fmt.Sprintf("Mismatched cache line size: %d vs %d", lineSize, cacheLine))
			}

			caches = append(caches, Cache{
				Type:                   t,
				Level:                  (ax >> 5) & 0x7,
				FullyAssociative:       ((ax >> 9) & 1) == 1,
				Partitions:             ((bx >> 12) & 0x3ff) + 1,
				Ways:                   ((bx >> 22) & 0x3ff) + 1,
				Sets:                   cx + 1,
				InvalidateHierarchical: (dx & 1) == 0,
				Inclusive:              ((dx >> 1) & 1) == 1,
				DirectMapped:           ((dx >> 2) & 1) == 0,
			})
		}
	}

	// eax=7, ecx=0 gets extended features in ecx:ebx.
	_, bx, cx, _ = HostID(7, 0)
	featureBlock2 := bx
	featureBlock3 := cx

	// Leaf 0xd is supported only if CPUID.1:ECX.XSAVE[bit 26] is set.
	var featureBlock4 uint32
	if (featureBlock0 & (1 << 26)) != 0 {
		featureBlock4, _, _, _ = HostID(uint32(xSaveInfo), 1)
	}

	// eax=0x80000000 gets supported extended levels. We use this to
	// determine if there are any non-zero block 4 or block 6 bits to find.
	var featureBlock5, featureBlock6 uint32
	if ax, _, _, _ := HostID(uint32(extendedFunctionInfo), 0); ax >= uint32(extendedFeatures) {
		// eax=0x80000001 gets AMD added feature bits.
		_, _, cx, dx = HostID(uint32(extendedFeatures), 0)
		featureBlock5 = cx
		// Ignore features duplicated from block 1 on AMD. These bits
		// are reserved on Intel.
		featureBlock6 = dx &^ block6DuplicateMask
	}

	set := setFromBlockMasks(featureBlock0, featureBlock1, featureBlock2, featureBlock3, featureBlock4, featureBlock5, featureBlock6)
	return &FeatureSet{
		Set:            set,
		VendorID:       vendorID,
		ExtendedFamily: ef,
		ExtendedModel:  em,
		ProcessorType:  pt,
		Family:         f,
		Model:          m,
		SteppingID:     sid,
		CacheLine:      cacheLine,
		Caches:         caches,
	}
}

// Reads max cpu frequency from host /proc/cpuinfo. Must run before
// whitelisting. This value is used to create the fake /proc/cpuinfo from a
// FeatureSet.
func initCPUFreq() {
	cpuinfob, err := ioutil.ReadFile("/proc/cpuinfo")
	if err != nil {
		// Leave it as 0... The standalone VDSO bails out in the same
		// way.
		log.Warningf("Could not read /proc/cpuinfo: %v", err)
		return
	}
	cpuinfo := string(cpuinfob)

	// We get the value straight from host /proc/cpuinfo. On machines with
	// frequency scaling enabled, this will only get the current value
	// which will likely be inaccurate. This is fine on machines with
	// frequency scaling disabled.
	for _, line := range strings.Split(cpuinfo, "\n") {
		if strings.Contains(line, "cpu MHz") {
			splitMHz := strings.Split(line, ":")
			if len(splitMHz) < 2 {
				log.Warningf("Could not read /proc/cpuinfo: malformed cpu MHz line")
				return
			}

			// If there was a problem, leave cpuFreqMHz as 0.
			var err error
			cpuFreqMHz, err = strconv.ParseFloat(strings.TrimSpace(splitMHz[1]), 64)
			if err != nil {
				log.Warningf("Could not parse cpu MHz value %v: %v", splitMHz[1], err)
				cpuFreqMHz = 0
				return
			}
			return
		}
	}
	log.Warningf("Could not parse /proc/cpuinfo, it is empty or does not contain cpu MHz")
}

func initFeaturesFromString() {
	for f, s := range x86FeatureStrings {
		x86FeaturesFromString[s] = f
	}
	for f, s := range x86FeatureParseOnlyStrings {
		x86FeaturesFromString[s] = f
	}
}

func init() {
	// initCpuFreq must be run before whitelists are enabled.
	initCPUFreq()
	initFeaturesFromString()
}