// Copyright 2018 The gVisor Authors. // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. package ipv6 import ( "fmt" "gvisor.dev/gvisor/pkg/tcpip" "gvisor.dev/gvisor/pkg/tcpip/buffer" "gvisor.dev/gvisor/pkg/tcpip/header" "gvisor.dev/gvisor/pkg/tcpip/stack" ) // handleControl handles the case when an ICMP packet contains the headers of // the original packet that caused the ICMP one to be sent. This information is // used to find out which transport endpoint must be notified about the ICMP // packet. func (e *endpoint) handleControl(typ stack.ControlType, extra uint32, pkt stack.PacketBuffer) { h := header.IPv6(pkt.Data.First()) // We don't use IsValid() here because ICMP only requires that up to // 1280 bytes of the original packet be included. So it's likely that it // is truncated, which would cause IsValid to return false. // // Drop packet if it doesn't have the basic IPv6 header or if the // original source address doesn't match the endpoint's address. if len(h) < header.IPv6MinimumSize || h.SourceAddress() != e.id.LocalAddress { return } // Skip the IP header, then handle the fragmentation header if there // is one. pkt.Data.TrimFront(header.IPv6MinimumSize) p := h.TransportProtocol() if p == header.IPv6FragmentHeader { f := header.IPv6Fragment(pkt.Data.First()) if !f.IsValid() || f.FragmentOffset() != 0 { // We can't handle fragments that aren't at offset 0 // because they don't have the transport headers. return } // Skip fragmentation header and find out the actual protocol // number. pkt.Data.TrimFront(header.IPv6FragmentHeaderSize) p = f.TransportProtocol() } // Deliver the control packet to the transport endpoint. e.dispatcher.DeliverTransportControlPacket(e.id.LocalAddress, h.DestinationAddress(), ProtocolNumber, p, typ, extra, pkt) } func (e *endpoint) handleICMP(r *stack.Route, netHeader buffer.View, pkt stack.PacketBuffer, hasFragmentHeader bool) { stats := r.Stats().ICMP sent := stats.V6PacketsSent received := stats.V6PacketsReceived v := pkt.Data.First() if len(v) < header.ICMPv6MinimumSize { received.Invalid.Increment() return } h := header.ICMPv6(v) iph := header.IPv6(netHeader) // Validate ICMPv6 checksum before processing the packet. // // Only the first view in vv is accounted for by h. To account for the // rest of vv, a shallow copy is made and the first view is removed. // This copy is used as extra payload during the checksum calculation. payload := pkt.Data.Clone(nil) payload.RemoveFirst() if got, want := h.Checksum(), header.ICMPv6Checksum(h, iph.SourceAddress(), iph.DestinationAddress(), payload); got != want { received.Invalid.Increment() return } isNDPValid := func() bool { // As per RFC 4861 sections 4.1 - 4.5, 6.1.1, 6.1.2, 7.1.1, 7.1.2 and // 8.1, nodes MUST silently drop NDP packets where the Hop Limit field // in the IPv6 header is not set to 255, or the ICMPv6 Code field is not // set to 0. // // As per RFC 6980 section 5, nodes MUST silently drop NDP messages if the // packet includes a fragmentation header. return !hasFragmentHeader && iph.HopLimit() == header.NDPHopLimit && h.Code() == 0 } // TODO(b/112892170): Meaningfully handle all ICMP types. switch h.Type() { case header.ICMPv6PacketTooBig: received.PacketTooBig.Increment() if len(v) < header.ICMPv6PacketTooBigMinimumSize { received.Invalid.Increment() return } pkt.Data.TrimFront(header.ICMPv6PacketTooBigMinimumSize) mtu := h.MTU() e.handleControl(stack.ControlPacketTooBig, calculateMTU(mtu), pkt) case header.ICMPv6DstUnreachable: received.DstUnreachable.Increment() if len(v) < header.ICMPv6DstUnreachableMinimumSize { received.Invalid.Increment() return } pkt.Data.TrimFront(header.ICMPv6DstUnreachableMinimumSize) switch h.Code() { case header.ICMPv6PortUnreachable: e.handleControl(stack.ControlPortUnreachable, 0, pkt) } case header.ICMPv6NeighborSolicit: received.NeighborSolicit.Increment() if len(v) < header.ICMPv6NeighborSolicitMinimumSize || !isNDPValid() { received.Invalid.Increment() return } ns := header.NDPNeighborSolicit(h.NDPPayload()) it, err := ns.Options().Iter(true) if err != nil { // If we have a malformed NDP NS option, drop the packet. received.Invalid.Increment() return } targetAddr := ns.TargetAddress() s := r.Stack() if isTentative, err := s.IsAddrTentative(e.nicID, targetAddr); err != nil { // We will only get an error if the NIC is unrecognized, which should not // happen. For now, drop this packet. // // TODO(b/141002840): Handle this better? return } else if isTentative { // If the target address is tentative and the source of the packet is a // unicast (specified) address, then the source of the packet is // attempting to perform address resolution on the target. In this case, // the solicitation is silently ignored, as per RFC 4862 section 5.4.3. // // If the target address is tentative and the source of the packet is the // unspecified address (::), then we know another node is also performing // DAD for the same address (since the target address is tentative for us, // we know we are also performing DAD on it). In this case we let the // stack know so it can handle such a scenario and do nothing further with // the NS. if r.RemoteAddress == header.IPv6Any { s.DupTentativeAddrDetected(e.nicID, targetAddr) } // Do not handle neighbor solicitations targeted to an address that is // tentative on the NIC any further. return } // At this point we know that the target address is not tentative on the NIC // so the packet is processed as defined in RFC 4861, as per RFC 4862 // section 5.4.3. // Is the NS targetting us? if e.linkAddrCache.CheckLocalAddress(e.nicID, ProtocolNumber, targetAddr) == 0 { return } // If the NS message contains the Source Link-Layer Address option, update // the link address cache with the value of the option. // // TODO(b/148429853): Properly process the NS message and do Neighbor // Unreachability Detection. var sourceLinkAddr tcpip.LinkAddress for { opt, done, err := it.Next() if err != nil { // This should never happen as Iter(true) above did not return an error. panic(fmt.Sprintf("unexpected error when iterating over NDP options: %s", err)) } if done { break } switch opt := opt.(type) { case header.NDPSourceLinkLayerAddressOption: // No RFCs define what to do when an NS message has multiple Source // Link-Layer Address options. Since no interface can have multiple // link-layer addresses, we consider such messages invalid. if len(sourceLinkAddr) != 0 { received.Invalid.Increment() return } sourceLinkAddr = opt.EthernetAddress() } } unspecifiedSource := r.RemoteAddress == header.IPv6Any // As per RFC 4861 section 4.3, the Source Link-Layer Address Option MUST // NOT be included when the source IP address is the unspecified address. // Otherwise, on link layers that have addresses this option MUST be // included in multicast solicitations and SHOULD be included in unicast // solicitations. if len(sourceLinkAddr) == 0 { if header.IsV6MulticastAddress(r.LocalAddress) && !unspecifiedSource { received.Invalid.Increment() return } } else if unspecifiedSource { received.Invalid.Increment() return } else { e.linkAddrCache.AddLinkAddress(e.nicID, r.RemoteAddress, sourceLinkAddr) } // ICMPv6 Neighbor Solicit messages are always sent to // specially crafted IPv6 multicast addresses. As a result, the // route we end up with here has as its LocalAddress such a // multicast address. It would be nonsense to claim that our // source address is a multicast address, so we manually set // the source address to the target address requested in the // solicit message. Since that requires mutating the route, we // must first clone it. r := r.Clone() defer r.Release() r.LocalAddress = targetAddr // As per RFC 4861 section 7.2.4, if the the source of the solicitation is // the unspecified address, the node MUST set the Solicited flag to zero and // multicast the advertisement to the all-nodes address. solicited := true if unspecifiedSource { solicited = false r.RemoteAddress = header.IPv6AllNodesMulticastAddress } // If the NS has a source link-layer option, use the link address it // specifies as the remote link address for the response instead of the // source link address of the packet. // // TODO(#2401): As per RFC 4861 section 7.2.4 we should consult our link // address cache for the right destination link address instead of manually // patching the route with the remote link address if one is specified in a // Source Link-Layer Address option. if len(sourceLinkAddr) != 0 { r.RemoteLinkAddress = sourceLinkAddr } optsSerializer := header.NDPOptionsSerializer{ header.NDPTargetLinkLayerAddressOption(r.LocalLinkAddress), } hdr := buffer.NewPrependable(int(r.MaxHeaderLength()) + header.ICMPv6NeighborAdvertMinimumSize + int(optsSerializer.Length())) packet := header.ICMPv6(hdr.Prepend(header.ICMPv6NeighborAdvertSize)) packet.SetType(header.ICMPv6NeighborAdvert) na := header.NDPNeighborAdvert(packet.NDPPayload()) na.SetSolicitedFlag(solicited) na.SetOverrideFlag(true) na.SetTargetAddress(targetAddr) opts := na.Options() opts.Serialize(optsSerializer) packet.SetChecksum(header.ICMPv6Checksum(packet, r.LocalAddress, r.RemoteAddress, buffer.VectorisedView{})) // RFC 4861 Neighbor Discovery for IP version 6 (IPv6) // // 7.1.2. Validation of Neighbor Advertisements // // The IP Hop Limit field has a value of 255, i.e., the packet // could not possibly have been forwarded by a router. if err := r.WritePacket(nil /* gso */, stack.NetworkHeaderParams{Protocol: header.ICMPv6ProtocolNumber, TTL: header.NDPHopLimit, TOS: stack.DefaultTOS}, stack.PacketBuffer{ Header: hdr, }); err != nil { sent.Dropped.Increment() return } sent.NeighborAdvert.Increment() case header.ICMPv6NeighborAdvert: received.NeighborAdvert.Increment() if len(v) < header.ICMPv6NeighborAdvertSize || !isNDPValid() { received.Invalid.Increment() return } na := header.NDPNeighborAdvert(h.NDPPayload()) it, err := na.Options().Iter(true) if err != nil { // If we have a malformed NDP NA option, drop the packet. received.Invalid.Increment() return } targetAddr := na.TargetAddress() stack := r.Stack() rxNICID := r.NICID() if isTentative, err := stack.IsAddrTentative(rxNICID, targetAddr); err != nil { // We will only get an error if rxNICID is unrecognized, // which should not happen. For now short-circuit this // packet. // // TODO(b/141002840): Handle this better? return } else if isTentative { // We just got an NA from a node that owns an address we // are performing DAD on, implying the address is not // unique. In this case we let the stack know so it can // handle such a scenario and do nothing furthur with // the NDP NA. stack.DupTentativeAddrDetected(rxNICID, targetAddr) return } // At this point we know that the targetAddress is not tentative // on rxNICID. However, targetAddr may still be assigned to // rxNICID but not tentative (it could be permanent). Such a // scenario is beyond the scope of RFC 4862. As such, we simply // ignore such a scenario for now and proceed as normal. // // If the NA message has the target link layer option, update the link // address cache with the link address for the target of the message. // // TODO(b/143147598): Handle the scenario described above. Also // inform the netstack integration that a duplicate address was // detected outside of DAD. // // TODO(b/148429853): Properly process the NA message and do Neighbor // Unreachability Detection. for { opt, done, err := it.Next() if err != nil { // This should never happen as Iter(true) above did not return an error. panic(fmt.Sprintf("unexpected error when iterating over NDP options: %s", err)) } if done { break } switch opt := opt.(type) { case header.NDPTargetLinkLayerAddressOption: e.linkAddrCache.AddLinkAddress(e.nicID, targetAddr, opt.EthernetAddress()) } } case header.ICMPv6EchoRequest: received.EchoRequest.Increment() if len(v) < header.ICMPv6EchoMinimumSize { received.Invalid.Increment() return } pkt.Data.TrimFront(header.ICMPv6EchoMinimumSize) hdr := buffer.NewPrependable(int(r.MaxHeaderLength()) + header.ICMPv6EchoMinimumSize) packet := header.ICMPv6(hdr.Prepend(header.ICMPv6EchoMinimumSize)) copy(packet, h) packet.SetType(header.ICMPv6EchoReply) packet.SetChecksum(header.ICMPv6Checksum(packet, r.LocalAddress, r.RemoteAddress, pkt.Data)) if err := r.WritePacket(nil /* gso */, stack.NetworkHeaderParams{Protocol: header.ICMPv6ProtocolNumber, TTL: r.DefaultTTL(), TOS: stack.DefaultTOS}, stack.PacketBuffer{ Header: hdr, Data: pkt.Data, }); err != nil { sent.Dropped.Increment() return } sent.EchoReply.Increment() case header.ICMPv6EchoReply: received.EchoReply.Increment() if len(v) < header.ICMPv6EchoMinimumSize { received.Invalid.Increment() return } e.dispatcher.DeliverTransportPacket(r, header.ICMPv6ProtocolNumber, pkt) case header.ICMPv6TimeExceeded: received.TimeExceeded.Increment() case header.ICMPv6ParamProblem: received.ParamProblem.Increment() case header.ICMPv6RouterSolicit: received.RouterSolicit.Increment() if !isNDPValid() { received.Invalid.Increment() return } case header.ICMPv6RouterAdvert: received.RouterAdvert.Increment() p := h.NDPPayload() if len(p) < header.NDPRAMinimumSize || !isNDPValid() { received.Invalid.Increment() return } routerAddr := iph.SourceAddress() // // Validate the RA as per RFC 4861 section 6.1.2. // // Is the IP Source Address a link-local address? if !header.IsV6LinkLocalAddress(routerAddr) { // ...No, silently drop the packet. received.Invalid.Increment() return } ra := header.NDPRouterAdvert(p) opts := ra.Options() // Are options valid as per the wire format? if _, err := opts.Iter(true); err != nil { // ...No, silently drop the packet. received.Invalid.Increment() return } // // At this point, we have a valid Router Advertisement, as far // as RFC 4861 section 6.1.2 is concerned. // // Tell the NIC to handle the RA. stack := r.Stack() rxNICID := r.NICID() stack.HandleNDPRA(rxNICID, routerAddr, ra) case header.ICMPv6RedirectMsg: received.RedirectMsg.Increment() if !isNDPValid() { received.Invalid.Increment() return } default: received.Invalid.Increment() } } const ( ndpSolicitedFlag = 1 << 6 ndpOverrideFlag = 1 << 5 ndpOptSrcLinkAddr = 1 ndpOptDstLinkAddr = 2 icmpV6FlagOffset = 4 icmpV6OptOffset = 24 icmpV6LengthOffset = 25 ) var broadcastMAC = tcpip.LinkAddress([]byte{0xff, 0xff, 0xff, 0xff, 0xff, 0xff}) var _ stack.LinkAddressResolver = (*protocol)(nil) // LinkAddressProtocol implements stack.LinkAddressResolver. func (*protocol) LinkAddressProtocol() tcpip.NetworkProtocolNumber { return header.IPv6ProtocolNumber } // LinkAddressRequest implements stack.LinkAddressResolver. func (*protocol) LinkAddressRequest(addr, localAddr tcpip.Address, linkEP stack.LinkEndpoint) *tcpip.Error { snaddr := header.SolicitedNodeAddr(addr) // TODO(b/148672031): Use stack.FindRoute instead of manually creating the // route here. Note, we would need the nicID to do this properly so the right // NIC (associated to linkEP) is used to send the NDP NS message. r := &stack.Route{ LocalAddress: localAddr, RemoteAddress: snaddr, RemoteLinkAddress: header.EthernetAddressFromMulticastIPv6Address(snaddr), } hdr := buffer.NewPrependable(int(linkEP.MaxHeaderLength()) + header.IPv6MinimumSize + header.ICMPv6NeighborAdvertSize) pkt := header.ICMPv6(hdr.Prepend(header.ICMPv6NeighborAdvertSize)) pkt.SetType(header.ICMPv6NeighborSolicit) copy(pkt[icmpV6OptOffset-len(addr):], addr) pkt[icmpV6OptOffset] = ndpOptSrcLinkAddr pkt[icmpV6LengthOffset] = 1 copy(pkt[icmpV6LengthOffset+1:], linkEP.LinkAddress()) pkt.SetChecksum(header.ICMPv6Checksum(pkt, r.LocalAddress, r.RemoteAddress, buffer.VectorisedView{})) length := uint16(hdr.UsedLength()) ip := header.IPv6(hdr.Prepend(header.IPv6MinimumSize)) ip.Encode(&header.IPv6Fields{ PayloadLength: length, NextHeader: uint8(header.ICMPv6ProtocolNumber), HopLimit: header.NDPHopLimit, SrcAddr: r.LocalAddress, DstAddr: r.RemoteAddress, }) // TODO(stijlist): count this in ICMP stats. return linkEP.WritePacket(r, nil /* gso */, ProtocolNumber, stack.PacketBuffer{ Header: hdr, }) } // ResolveStaticAddress implements stack.LinkAddressResolver. func (*protocol) ResolveStaticAddress(addr tcpip.Address) (tcpip.LinkAddress, bool) { if header.IsV6MulticastAddress(addr) { return header.EthernetAddressFromMulticastIPv6Address(addr), true } return tcpip.LinkAddress([]byte(nil)), false }