// Copyright 2018 The gVisor Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

// Package ipv4 contains the implementation of the ipv4 network protocol.
package ipv4

import (
	"errors"
	"fmt"
	"math"
	"sync/atomic"
	"time"

	"gvisor.dev/gvisor/pkg/sync"
	"gvisor.dev/gvisor/pkg/tcpip"
	"gvisor.dev/gvisor/pkg/tcpip/buffer"
	"gvisor.dev/gvisor/pkg/tcpip/header"
	"gvisor.dev/gvisor/pkg/tcpip/header/parse"
	"gvisor.dev/gvisor/pkg/tcpip/network/fragmentation"
	"gvisor.dev/gvisor/pkg/tcpip/network/hash"
	"gvisor.dev/gvisor/pkg/tcpip/stack"
)

const (
	// ReassembleTimeout is the time a packet stays in the reassembly
	// system before being evicted.
	// As per RFC 791 section 3.2:
	//   The current recommendation for the initial timer setting is 15 seconds.
	//   This may be changed as experience with this protocol accumulates.
	//
	// Considering that it is an old recommendation, we use the same reassembly
	// timeout that linux defines, which is 30 seconds:
	// https://github.com/torvalds/linux/blob/47ec5303d73ea344e84f46660fff693c57641386/include/net/ip.h#L138
	ReassembleTimeout = 30 * time.Second

	// ProtocolNumber is the ipv4 protocol number.
	ProtocolNumber = header.IPv4ProtocolNumber

	// MaxTotalSize is maximum size that can be encoded in the 16-bit
	// TotalLength field of the ipv4 header.
	MaxTotalSize = 0xffff

	// DefaultTTL is the default time-to-live value for this endpoint.
	DefaultTTL = 64

	// buckets is the number of identifier buckets.
	buckets = 2048

	// The size of a fragment block, in bytes, as per RFC 791 section 3.1,
	// page 14.
	fragmentblockSize = 8
)

var ipv4BroadcastAddr = header.IPv4Broadcast.WithPrefix()

var _ stack.GroupAddressableEndpoint = (*endpoint)(nil)
var _ stack.AddressableEndpoint = (*endpoint)(nil)
var _ stack.NetworkEndpoint = (*endpoint)(nil)

type endpoint struct {
	nic        stack.NetworkInterface
	dispatcher stack.TransportDispatcher
	protocol   *protocol

	// enabled is set to 1 when the enpoint is enabled and 0 when it is
	// disabled.
	//
	// Must be accessed using atomic operations.
	enabled uint32

	mu struct {
		sync.RWMutex

		addressableEndpointState stack.AddressableEndpointState
	}
}

// NewEndpoint creates a new ipv4 endpoint.
func (p *protocol) NewEndpoint(nic stack.NetworkInterface, _ stack.LinkAddressCache, _ stack.NUDHandler, dispatcher stack.TransportDispatcher) stack.NetworkEndpoint {
	e := &endpoint{
		nic:        nic,
		dispatcher: dispatcher,
		protocol:   p,
	}
	e.mu.addressableEndpointState.Init(e)
	return e
}

// Enable implements stack.NetworkEndpoint.
func (e *endpoint) Enable() *tcpip.Error {
	e.mu.Lock()
	defer e.mu.Unlock()

	// If the NIC is not enabled, the endpoint can't do anything meaningful so
	// don't enable the endpoint.
	if !e.nic.Enabled() {
		return tcpip.ErrNotPermitted
	}

	// If the endpoint is already enabled, there is nothing for it to do.
	if !e.setEnabled(true) {
		return nil
	}

	// Create an endpoint to receive broadcast packets on this interface.
	ep, err := e.mu.addressableEndpointState.AddAndAcquirePermanentAddress(ipv4BroadcastAddr, stack.NeverPrimaryEndpoint, stack.AddressConfigStatic, false /* deprecated */)
	if err != nil {
		return err
	}
	// We have no need for the address endpoint.
	ep.DecRef()

	// As per RFC 1122 section 3.3.7, all hosts should join the all-hosts
	// multicast group. Note, the IANA calls the all-hosts multicast group the
	// all-systems multicast group.
	_, err = e.mu.addressableEndpointState.JoinGroup(header.IPv4AllSystems)
	return err
}

// Enabled implements stack.NetworkEndpoint.
func (e *endpoint) Enabled() bool {
	return e.nic.Enabled() && e.isEnabled()
}

// isEnabled returns true if the endpoint is enabled, regardless of the
// enabled status of the NIC.
func (e *endpoint) isEnabled() bool {
	return atomic.LoadUint32(&e.enabled) == 1
}

// setEnabled sets the enabled status for the endpoint.
//
// Returns true if the enabled status was updated.
func (e *endpoint) setEnabled(v bool) bool {
	if v {
		return atomic.SwapUint32(&e.enabled, 1) == 0
	}
	return atomic.SwapUint32(&e.enabled, 0) == 1
}

// Disable implements stack.NetworkEndpoint.
func (e *endpoint) Disable() {
	e.mu.Lock()
	defer e.mu.Unlock()
	e.disableLocked()
}

func (e *endpoint) disableLocked() {
	if !e.setEnabled(false) {
		return
	}

	// The endpoint may have already left the multicast group.
	if _, err := e.mu.addressableEndpointState.LeaveGroup(header.IPv4AllSystems); err != nil && err != tcpip.ErrBadLocalAddress {
		panic(fmt.Sprintf("unexpected error when leaving group = %s: %s", header.IPv4AllSystems, err))
	}

	// The address may have already been removed.
	if err := e.mu.addressableEndpointState.RemovePermanentAddress(ipv4BroadcastAddr.Address); err != nil && err != tcpip.ErrBadLocalAddress {
		panic(fmt.Sprintf("unexpected error when removing address = %s: %s", ipv4BroadcastAddr.Address, err))
	}
}

// DefaultTTL is the default time-to-live value for this endpoint.
func (e *endpoint) DefaultTTL() uint8 {
	return e.protocol.DefaultTTL()
}

// MTU implements stack.NetworkEndpoint.MTU. It returns the link-layer MTU minus
// the network layer max header length.
func (e *endpoint) MTU() uint32 {
	networkMTU, err := calculateNetworkMTU(e.nic.MTU(), header.IPv4MinimumSize)
	if err != nil {
		return 0
	}
	return networkMTU
}

// MaxHeaderLength returns the maximum length needed by ipv4 headers (and
// underlying protocols).
func (e *endpoint) MaxHeaderLength() uint16 {
	return e.nic.MaxHeaderLength() + header.IPv4MaximumHeaderSize
}

// NetworkProtocolNumber implements stack.NetworkEndpoint.NetworkProtocolNumber.
func (e *endpoint) NetworkProtocolNumber() tcpip.NetworkProtocolNumber {
	return e.protocol.Number()
}

func (e *endpoint) addIPHeader(r *stack.Route, pkt *stack.PacketBuffer, params stack.NetworkHeaderParams) {
	ip := header.IPv4(pkt.NetworkHeader().Push(header.IPv4MinimumSize))
	length := uint16(pkt.Size())
	// RFC 6864 section 4.3 mandates uniqueness of ID values for non-atomic
	// datagrams. Since the DF bit is never being set here, all datagrams
	// are non-atomic and need an ID.
	id := atomic.AddUint32(&e.protocol.ids[hashRoute(r, params.Protocol, e.protocol.hashIV)%buckets], 1)
	ip.Encode(&header.IPv4Fields{
		IHL:         header.IPv4MinimumSize,
		TotalLength: length,
		ID:          uint16(id),
		TTL:         params.TTL,
		TOS:         params.TOS,
		Protocol:    uint8(params.Protocol),
		SrcAddr:     r.LocalAddress,
		DstAddr:     r.RemoteAddress,
	})
	ip.SetChecksum(^ip.CalculateChecksum())
	pkt.NetworkProtocolNumber = ProtocolNumber
}

// handleFragments fragments pkt and calls the handler function on each
// fragment. It returns the number of fragments handled and the number of
// fragments left to be processed. The IP header must already be present in the
// original packet.
func (e *endpoint) handleFragments(r *stack.Route, gso *stack.GSO, networkMTU uint32, pkt *stack.PacketBuffer, handler func(*stack.PacketBuffer) *tcpip.Error) (int, int, *tcpip.Error) {
	// Round the MTU down to align to 8 bytes.
	fragmentPayloadSize := networkMTU &^ 7
	networkHeader := header.IPv4(pkt.NetworkHeader().View())
	pf := fragmentation.MakePacketFragmenter(pkt, fragmentPayloadSize, pkt.AvailableHeaderBytes()+len(networkHeader))

	var n int
	for {
		fragPkt, more := buildNextFragment(&pf, networkHeader)
		if err := handler(fragPkt); err != nil {
			return n, pf.RemainingFragmentCount() + 1, err
		}
		n++
		if !more {
			return n, pf.RemainingFragmentCount(), nil
		}
	}
}

// WritePacket writes a packet to the given destination address and protocol.
func (e *endpoint) WritePacket(r *stack.Route, gso *stack.GSO, params stack.NetworkHeaderParams, pkt *stack.PacketBuffer) *tcpip.Error {
	e.addIPHeader(r, pkt, params)
	return e.writePacket(r, gso, pkt)
}

func (e *endpoint) writePacket(r *stack.Route, gso *stack.GSO, pkt *stack.PacketBuffer) *tcpip.Error {
	// iptables filtering. All packets that reach here are locally
	// generated.
	nicName := e.protocol.stack.FindNICNameFromID(e.nic.ID())
	if ok := e.protocol.stack.IPTables().Check(stack.Output, pkt, gso, r, "", nicName); !ok {
		// iptables is telling us to drop the packet.
		r.Stats().IP.IPTablesOutputDropped.Increment()
		return nil
	}

	// If the packet is manipulated as per NAT Output rules, handle packet
	// based on destination address and do not send the packet to link
	// layer.
	//
	// TODO(gvisor.dev/issue/170): We should do this for every
	// packet, rather than only NATted packets, but removing this check
	// short circuits broadcasts before they are sent out to other hosts.
	if pkt.NatDone {
		netHeader := header.IPv4(pkt.NetworkHeader().View())
		ep, err := e.protocol.stack.FindNetworkEndpoint(ProtocolNumber, netHeader.DestinationAddress())
		if err == nil {
			pkt := pkt.CloneToInbound()
			if e.protocol.stack.ParsePacketBuffer(ProtocolNumber, pkt) == stack.ParsedOK {
				route := r.ReverseRoute(netHeader.SourceAddress(), netHeader.DestinationAddress())
				route.PopulatePacketInfo(pkt)
				// Since we rewrote the packet but it is being routed back to us, we can
				// safely assume the checksum is valid.
				pkt.RXTransportChecksumValidated = true
				ep.HandlePacket(pkt)
			}
			return nil
		}
	}

	if r.Loop&stack.PacketLoop != 0 {
		pkt := pkt.CloneToInbound()
		if e.protocol.stack.ParsePacketBuffer(ProtocolNumber, pkt) == stack.ParsedOK {
			loopedR := r.MakeLoopedRoute()
			loopedR.PopulatePacketInfo(pkt)
			loopedR.Release()
			e.HandlePacket(pkt)
		}
	}
	if r.Loop&stack.PacketOut == 0 {
		return nil
	}

	networkMTU, err := calculateNetworkMTU(e.nic.MTU(), uint32(pkt.NetworkHeader().View().Size()))
	if err != nil {
		r.Stats().IP.OutgoingPacketErrors.Increment()
		return err
	}

	if packetMustBeFragmented(pkt, networkMTU, gso) {
		sent, remain, err := e.handleFragments(r, gso, networkMTU, pkt, func(fragPkt *stack.PacketBuffer) *tcpip.Error {
			// TODO(gvisor.dev/issue/3884): Evaluate whether we want to send each
			// fragment one by one using WritePacket() (current strategy) or if we
			// want to create a PacketBufferList from the fragments and feed it to
			// WritePackets(). It'll be faster but cost more memory.
			return e.nic.WritePacket(r, gso, ProtocolNumber, fragPkt)
		})
		r.Stats().IP.PacketsSent.IncrementBy(uint64(sent))
		r.Stats().IP.OutgoingPacketErrors.IncrementBy(uint64(remain))
		return err
	}

	if err := e.nic.WritePacket(r, gso, ProtocolNumber, pkt); err != nil {
		r.Stats().IP.OutgoingPacketErrors.Increment()
		return err
	}
	r.Stats().IP.PacketsSent.Increment()
	return nil
}

// WritePackets implements stack.NetworkEndpoint.WritePackets.
func (e *endpoint) WritePackets(r *stack.Route, gso *stack.GSO, pkts stack.PacketBufferList, params stack.NetworkHeaderParams) (int, *tcpip.Error) {
	if r.Loop&stack.PacketLoop != 0 {
		panic("multiple packets in local loop")
	}
	if r.Loop&stack.PacketOut == 0 {
		return pkts.Len(), nil
	}

	for pkt := pkts.Front(); pkt != nil; pkt = pkt.Next() {
		e.addIPHeader(r, pkt, params)
		networkMTU, err := calculateNetworkMTU(e.nic.MTU(), uint32(pkt.NetworkHeader().View().Size()))
		if err != nil {
			r.Stats().IP.OutgoingPacketErrors.IncrementBy(uint64(pkts.Len()))
			return 0, err
		}

		if packetMustBeFragmented(pkt, networkMTU, gso) {
			// Keep track of the packet that is about to be fragmented so it can be
			// removed once the fragmentation is done.
			originalPkt := pkt
			if _, _, err := e.handleFragments(r, gso, networkMTU, pkt, func(fragPkt *stack.PacketBuffer) *tcpip.Error {
				// Modify the packet list in place with the new fragments.
				pkts.InsertAfter(pkt, fragPkt)
				pkt = fragPkt
				return nil
			}); err != nil {
				panic(fmt.Sprintf("e.handleFragments(_, _, %d, _, _) = %s", networkMTU, err))
			}
			// Remove the packet that was just fragmented and process the rest.
			pkts.Remove(originalPkt)
		}
	}

	nicName := e.protocol.stack.FindNICNameFromID(e.nic.ID())
	// iptables filtering. All packets that reach here are locally
	// generated.
	ipt := e.protocol.stack.IPTables()
	dropped, natPkts := ipt.CheckPackets(stack.Output, pkts, gso, r, nicName)
	if len(dropped) == 0 && len(natPkts) == 0 {
		// Fast path: If no packets are to be dropped then we can just invoke the
		// faster WritePackets API directly.
		n, err := e.nic.WritePackets(r, gso, pkts, ProtocolNumber)
		r.Stats().IP.PacketsSent.IncrementBy(uint64(n))
		if err != nil {
			r.Stats().IP.OutgoingPacketErrors.IncrementBy(uint64(pkts.Len() - n))
		}
		return n, err
	}
	r.Stats().IP.IPTablesOutputDropped.IncrementBy(uint64(len(dropped)))

	// Slow path as we are dropping some packets in the batch degrade to
	// emitting one packet at a time.
	n := 0
	for pkt := pkts.Front(); pkt != nil; pkt = pkt.Next() {
		if _, ok := dropped[pkt]; ok {
			continue
		}
		if _, ok := natPkts[pkt]; ok {
			netHeader := header.IPv4(pkt.NetworkHeader().View())
			if ep, err := e.protocol.stack.FindNetworkEndpoint(ProtocolNumber, netHeader.DestinationAddress()); err == nil {
				pkt := pkt.CloneToInbound()
				if e.protocol.stack.ParsePacketBuffer(ProtocolNumber, pkt) == stack.ParsedOK {
					route := r.ReverseRoute(netHeader.SourceAddress(), netHeader.DestinationAddress())
					route.PopulatePacketInfo(pkt)
					ep.HandlePacket(pkt)
				}
				n++
				continue
			}
		}
		if err := e.nic.WritePacket(r, gso, ProtocolNumber, pkt); err != nil {
			r.Stats().IP.PacketsSent.IncrementBy(uint64(n))
			r.Stats().IP.OutgoingPacketErrors.IncrementBy(uint64(pkts.Len() - n - len(dropped)))
			// Dropped packets aren't errors, so include them in
			// the return value.
			return n + len(dropped), err
		}
		n++
	}
	r.Stats().IP.PacketsSent.IncrementBy(uint64(n))
	// Dropped packets aren't errors, so include them in the return value.
	return n + len(dropped), nil
}

// WriteHeaderIncludedPacket implements stack.NetworkEndpoint.
func (e *endpoint) WriteHeaderIncludedPacket(r *stack.Route, pkt *stack.PacketBuffer) *tcpip.Error {
	// The packet already has an IP header, but there are a few required
	// checks.
	h, ok := pkt.Data.PullUp(header.IPv4MinimumSize)
	if !ok {
		return tcpip.ErrMalformedHeader
	}

	hdrLen := header.IPv4(h).HeaderLength()
	if hdrLen < header.IPv4MinimumSize {
		return tcpip.ErrMalformedHeader
	}

	h, ok = pkt.Data.PullUp(int(hdrLen))
	if !ok {
		return tcpip.ErrMalformedHeader
	}
	ip := header.IPv4(h)

	// Always set the total length.
	pktSize := pkt.Data.Size()
	ip.SetTotalLength(uint16(pktSize))

	// Set the source address when zero.
	if ip.SourceAddress() == header.IPv4Any {
		ip.SetSourceAddress(r.LocalAddress)
	}

	// Set the destination. If the packet already included a destination, it will
	// be part of the route anyways.
	ip.SetDestinationAddress(r.RemoteAddress)

	// Set the packet ID when zero.
	if ip.ID() == 0 {
		// RFC 6864 section 4.3 mandates uniqueness of ID values for
		// non-atomic datagrams, so assign an ID to all such datagrams
		// according to the definition given in RFC 6864 section 4.
		if ip.Flags()&header.IPv4FlagDontFragment == 0 || ip.Flags()&header.IPv4FlagMoreFragments != 0 || ip.FragmentOffset() > 0 {
			ip.SetID(uint16(atomic.AddUint32(&e.protocol.ids[hashRoute(r, 0 /* protocol */, e.protocol.hashIV)%buckets], 1)))
		}
	}

	// Always set the checksum.
	ip.SetChecksum(0)
	ip.SetChecksum(^ip.CalculateChecksum())

	// Populate the packet buffer's network header and don't allow an invalid
	// packet to be sent.
	//
	// Note that parsing only makes sure that the packet is well formed as per the
	// wire format. We also want to check if the header's fields are valid before
	// sending the packet.
	if !parse.IPv4(pkt) || !header.IPv4(pkt.NetworkHeader().View()).IsValid(pktSize) {
		return tcpip.ErrMalformedHeader
	}

	return e.writePacket(r, nil /* gso */, pkt)
}

// HandlePacket is called by the link layer when new ipv4 packets arrive for
// this endpoint.
func (e *endpoint) HandlePacket(pkt *stack.PacketBuffer) {
	if !e.isEnabled() {
		return
	}

	pkt.NICID = e.nic.ID()
	stats := e.protocol.stack.Stats()

	h := header.IPv4(pkt.NetworkHeader().View())
	if !h.IsValid(pkt.Data.Size() + pkt.NetworkHeader().View().Size() + pkt.TransportHeader().View().Size()) {
		stats.IP.MalformedPacketsReceived.Increment()
		return
	}

	// There has been some confusion regarding verifying checksums. We need
	// just look for negative 0 (0xffff) as the checksum, as it's not possible to
	// get positive 0 (0) for the checksum. Some bad implementations could get it
	// when doing entry replacement in the early days of the Internet,
	// however the lore that one needs to check for both persists.
	//
	// RFC 1624 section 1 describes the source of this confusion as:
	//     [the partial recalculation method described in RFC 1071] computes a
	//     result for certain cases that differs from the one obtained from
	//     scratch (one's complement of one's complement sum of the original
	//     fields).
	//
	// However RFC 1624 section 5 clarifies that if using the verification method
	// "recommended by RFC 1071, it does not matter if an intermediate system
	// generated a -0 instead of +0".
	//
	// RFC1071 page 1 specifies the verification method as:
	//	  (3)  To check a checksum, the 1's complement sum is computed over the
	//        same set of octets, including the checksum field.  If the result
	//        is all 1 bits (-0 in 1's complement arithmetic), the check
	//        succeeds.
	if h.CalculateChecksum() != 0xffff {
		stats.IP.MalformedPacketsReceived.Increment()
		return
	}

	// As per RFC 1122 section 3.2.1.3:
	//   When a host sends any datagram, the IP source address MUST
	//   be one of its own IP addresses (but not a broadcast or
	//   multicast address).
	if pkt.NetworkPacketInfo.RemoteAddressBroadcast || header.IsV4MulticastAddress(h.SourceAddress()) {
		stats.IP.InvalidSourceAddressesReceived.Increment()
		return
	}

	// iptables filtering. All packets that reach here are intended for
	// this machine and will not be forwarded.
	ipt := e.protocol.stack.IPTables()
	if ok := ipt.Check(stack.Input, pkt, nil, nil, "", ""); !ok {
		// iptables is telling us to drop the packet.
		stats.IP.IPTablesInputDropped.Increment()
		return
	}

	if h.More() || h.FragmentOffset() != 0 {
		if pkt.Data.Size()+pkt.TransportHeader().View().Size() == 0 {
			// Drop the packet as it's marked as a fragment but has
			// no payload.
			stats.IP.MalformedPacketsReceived.Increment()
			stats.IP.MalformedFragmentsReceived.Increment()
			return
		}
		// The packet is a fragment, let's try to reassemble it.
		start := h.FragmentOffset()
		// Drop the fragment if the size of the reassembled payload would exceed the
		// maximum payload size.
		//
		// Note that this addition doesn't overflow even on 32bit architecture
		// because pkt.Data.Size() should not exceed 65535 (the max IP datagram
		// size). Otherwise the packet would've been rejected as invalid before
		// reaching here.
		if int(start)+pkt.Data.Size() > header.IPv4MaximumPayloadSize {
			stats.IP.MalformedPacketsReceived.Increment()
			stats.IP.MalformedFragmentsReceived.Increment()
			return
		}

		// Set up a callback in case we need to send a Time Exceeded Message, as per
		// RFC 792:
		//
		//   If a host reassembling a fragmented datagram cannot complete the
		//   reassembly due to missing fragments within its time limit it discards
		//   the datagram, and it may send a time exceeded message.
		//
		//   If fragment zero is not available then no time exceeded need be sent at
		//   all.
		var releaseCB func(bool)
		if start == 0 {
			pkt := pkt.Clone()
			releaseCB = func(timedOut bool) {
				if timedOut {
					_ = e.protocol.returnError(&icmpReasonReassemblyTimeout{}, pkt)
				}
			}
		}

		var ready bool
		var err error
		proto := h.Protocol()
		pkt.Data, _, ready, err = e.protocol.fragmentation.Process(
			// As per RFC 791 section 2.3, the identification value is unique
			// for a source-destination pair and protocol.
			fragmentation.FragmentID{
				Source:      h.SourceAddress(),
				Destination: h.DestinationAddress(),
				ID:          uint32(h.ID()),
				Protocol:    proto,
			},
			start,
			start+uint16(pkt.Data.Size())-1,
			h.More(),
			proto,
			pkt.Data,
			releaseCB,
		)
		if err != nil {
			stats.IP.MalformedPacketsReceived.Increment()
			stats.IP.MalformedFragmentsReceived.Increment()
			return
		}
		if !ready {
			return
		}

		// The reassembler doesn't take care of fixing up the header, so we need
		// to do it here.
		h.SetTotalLength(uint16(pkt.Data.Size() + len((h))))
		h.SetFlagsFragmentOffset(0, 0)
	}
	stats.IP.PacketsDelivered.Increment()

	p := h.TransportProtocol()
	if p == header.ICMPv4ProtocolNumber {
		// TODO(gvisor.dev/issues/3810): when we sort out ICMP and transport
		// headers, the setting of the transport number here should be
		// unnecessary and removed.
		pkt.TransportProtocolNumber = p
		e.handleICMP(pkt)
		return
	}
	if len(h.Options()) != 0 {
		// TODO(gvisor.dev/issue/4586):
		// When we add forwarding support we should use the verified options
		// rather than just throwing them away.
		aux, _, err := e.processIPOptions(pkt, h.Options(), &optionUsageReceive{})
		if err != nil {
			switch {
			case
				errors.Is(err, header.ErrIPv4OptDuplicate),
				errors.Is(err, errIPv4RecordRouteOptInvalidPointer),
				errors.Is(err, errIPv4RecordRouteOptInvalidLength),
				errors.Is(err, errIPv4TimestampOptInvalidLength),
				errors.Is(err, errIPv4TimestampOptInvalidPointer),
				errors.Is(err, errIPv4TimestampOptOverflow):
				_ = e.protocol.returnError(&icmpReasonParamProblem{pointer: aux}, pkt)
				stats.MalformedRcvdPackets.Increment()
				stats.IP.MalformedPacketsReceived.Increment()
			}
			return
		}
	}

	switch res := e.dispatcher.DeliverTransportPacket(p, pkt); res {
	case stack.TransportPacketHandled:
	case stack.TransportPacketDestinationPortUnreachable:
		// As per RFC: 1122 Section 3.2.2.1 A host SHOULD generate Destination
		//   Unreachable messages with code:
		//     3 (Port Unreachable), when the designated transport protocol
		//     (e.g., UDP) is unable to demultiplex the datagram but has no
		//     protocol mechanism to inform the sender.
		_ = e.protocol.returnError(&icmpReasonPortUnreachable{}, pkt)
	case stack.TransportPacketProtocolUnreachable:
		// As per RFC: 1122 Section 3.2.2.1
		//   A host SHOULD generate Destination Unreachable messages with code:
		//     2 (Protocol Unreachable), when the designated transport protocol
		//     is not supported
		_ = e.protocol.returnError(&icmpReasonProtoUnreachable{}, pkt)
	default:
		panic(fmt.Sprintf("unrecognized result from DeliverTransportPacket = %d", res))
	}
}

// Close cleans up resources associated with the endpoint.
func (e *endpoint) Close() {
	e.mu.Lock()
	defer e.mu.Unlock()

	e.disableLocked()
	e.mu.addressableEndpointState.Cleanup()
}

// AddAndAcquirePermanentAddress implements stack.AddressableEndpoint.
func (e *endpoint) AddAndAcquirePermanentAddress(addr tcpip.AddressWithPrefix, peb stack.PrimaryEndpointBehavior, configType stack.AddressConfigType, deprecated bool) (stack.AddressEndpoint, *tcpip.Error) {
	e.mu.Lock()
	defer e.mu.Unlock()
	return e.mu.addressableEndpointState.AddAndAcquirePermanentAddress(addr, peb, configType, deprecated)
}

// RemovePermanentAddress implements stack.AddressableEndpoint.
func (e *endpoint) RemovePermanentAddress(addr tcpip.Address) *tcpip.Error {
	e.mu.Lock()
	defer e.mu.Unlock()
	return e.mu.addressableEndpointState.RemovePermanentAddress(addr)
}

// MainAddress implements stack.AddressableEndpoint.
func (e *endpoint) MainAddress() tcpip.AddressWithPrefix {
	e.mu.RLock()
	defer e.mu.RUnlock()
	return e.mu.addressableEndpointState.MainAddress()
}

// AcquireAssignedAddress implements stack.AddressableEndpoint.
func (e *endpoint) AcquireAssignedAddress(localAddr tcpip.Address, allowTemp bool, tempPEB stack.PrimaryEndpointBehavior) stack.AddressEndpoint {
	e.mu.Lock()
	defer e.mu.Unlock()

	loopback := e.nic.IsLoopback()
	addressEndpoint := e.mu.addressableEndpointState.ReadOnly().AddrOrMatching(localAddr, allowTemp, func(addressEndpoint stack.AddressEndpoint) bool {
		subnet := addressEndpoint.Subnet()
		// IPv4 has a notion of a subnet broadcast address and considers the
		// loopback interface bound to an address's whole subnet (on linux).
		return subnet.IsBroadcast(localAddr) || (loopback && subnet.Contains(localAddr))
	})
	if addressEndpoint != nil {
		return addressEndpoint
	}

	if !allowTemp {
		return nil
	}

	addr := localAddr.WithPrefix()
	addressEndpoint, err := e.mu.addressableEndpointState.AddAndAcquireTemporaryAddress(addr, tempPEB)
	if err != nil {
		// AddAddress only returns an error if the address is already assigned,
		// but we just checked above if the address exists so we expect no error.
		panic(fmt.Sprintf("e.mu.addressableEndpointState.AddAndAcquireTemporaryAddress(%s, %d): %s", addr, tempPEB, err))
	}
	return addressEndpoint
}

// AcquireOutgoingPrimaryAddress implements stack.AddressableEndpoint.
func (e *endpoint) AcquireOutgoingPrimaryAddress(remoteAddr tcpip.Address, allowExpired bool) stack.AddressEndpoint {
	e.mu.RLock()
	defer e.mu.RUnlock()
	return e.mu.addressableEndpointState.AcquireOutgoingPrimaryAddress(remoteAddr, allowExpired)
}

// PrimaryAddresses implements stack.AddressableEndpoint.
func (e *endpoint) PrimaryAddresses() []tcpip.AddressWithPrefix {
	e.mu.RLock()
	defer e.mu.RUnlock()
	return e.mu.addressableEndpointState.PrimaryAddresses()
}

// PermanentAddresses implements stack.AddressableEndpoint.
func (e *endpoint) PermanentAddresses() []tcpip.AddressWithPrefix {
	e.mu.RLock()
	defer e.mu.RUnlock()
	return e.mu.addressableEndpointState.PermanentAddresses()
}

// JoinGroup implements stack.GroupAddressableEndpoint.
func (e *endpoint) JoinGroup(addr tcpip.Address) (bool, *tcpip.Error) {
	if !header.IsV4MulticastAddress(addr) {
		return false, tcpip.ErrBadAddress
	}

	e.mu.Lock()
	defer e.mu.Unlock()
	return e.mu.addressableEndpointState.JoinGroup(addr)
}

// LeaveGroup implements stack.GroupAddressableEndpoint.
func (e *endpoint) LeaveGroup(addr tcpip.Address) (bool, *tcpip.Error) {
	e.mu.Lock()
	defer e.mu.Unlock()
	return e.mu.addressableEndpointState.LeaveGroup(addr)
}

// IsInGroup implements stack.GroupAddressableEndpoint.
func (e *endpoint) IsInGroup(addr tcpip.Address) bool {
	e.mu.RLock()
	defer e.mu.RUnlock()
	return e.mu.addressableEndpointState.IsInGroup(addr)
}

var _ stack.ForwardingNetworkProtocol = (*protocol)(nil)
var _ stack.NetworkProtocol = (*protocol)(nil)

type protocol struct {
	stack *stack.Stack

	// defaultTTL is the current default TTL for the protocol. Only the
	// uint8 portion of it is meaningful.
	//
	// Must be accessed using atomic operations.
	defaultTTL uint32

	// forwarding is set to 1 when the protocol has forwarding enabled and 0
	// when it is disabled.
	//
	// Must be accessed using atomic operations.
	forwarding uint32

	ids    []uint32
	hashIV uint32

	fragmentation *fragmentation.Fragmentation
}

// Number returns the ipv4 protocol number.
func (p *protocol) Number() tcpip.NetworkProtocolNumber {
	return ProtocolNumber
}

// MinimumPacketSize returns the minimum valid ipv4 packet size.
func (p *protocol) MinimumPacketSize() int {
	return header.IPv4MinimumSize
}

// DefaultPrefixLen returns the IPv4 default prefix length.
func (p *protocol) DefaultPrefixLen() int {
	return header.IPv4AddressSize * 8
}

// ParseAddresses implements NetworkProtocol.ParseAddresses.
func (*protocol) ParseAddresses(v buffer.View) (src, dst tcpip.Address) {
	h := header.IPv4(v)
	return h.SourceAddress(), h.DestinationAddress()
}

// SetOption implements NetworkProtocol.SetOption.
func (p *protocol) SetOption(option tcpip.SettableNetworkProtocolOption) *tcpip.Error {
	switch v := option.(type) {
	case *tcpip.DefaultTTLOption:
		p.SetDefaultTTL(uint8(*v))
		return nil
	default:
		return tcpip.ErrUnknownProtocolOption
	}
}

// Option implements NetworkProtocol.Option.
func (p *protocol) Option(option tcpip.GettableNetworkProtocolOption) *tcpip.Error {
	switch v := option.(type) {
	case *tcpip.DefaultTTLOption:
		*v = tcpip.DefaultTTLOption(p.DefaultTTL())
		return nil
	default:
		return tcpip.ErrUnknownProtocolOption
	}
}

// SetDefaultTTL sets the default TTL for endpoints created with this protocol.
func (p *protocol) SetDefaultTTL(ttl uint8) {
	atomic.StoreUint32(&p.defaultTTL, uint32(ttl))
}

// DefaultTTL returns the default TTL for endpoints created with this protocol.
func (p *protocol) DefaultTTL() uint8 {
	return uint8(atomic.LoadUint32(&p.defaultTTL))
}

// Close implements stack.TransportProtocol.Close.
func (*protocol) Close() {}

// Wait implements stack.TransportProtocol.Wait.
func (*protocol) Wait() {}

// Parse implements stack.NetworkProtocol.Parse.
func (*protocol) Parse(pkt *stack.PacketBuffer) (proto tcpip.TransportProtocolNumber, hasTransportHdr bool, ok bool) {
	if ok := parse.IPv4(pkt); !ok {
		return 0, false, false
	}

	ipHdr := header.IPv4(pkt.NetworkHeader().View())
	return ipHdr.TransportProtocol(), !ipHdr.More() && ipHdr.FragmentOffset() == 0, true
}

// Forwarding implements stack.ForwardingNetworkProtocol.
func (p *protocol) Forwarding() bool {
	return uint8(atomic.LoadUint32(&p.forwarding)) == 1
}

// SetForwarding implements stack.ForwardingNetworkProtocol.
func (p *protocol) SetForwarding(v bool) {
	if v {
		atomic.StoreUint32(&p.forwarding, 1)
	} else {
		atomic.StoreUint32(&p.forwarding, 0)
	}
}

// calculateNetworkMTU calculates the network-layer payload MTU based on the
// link-layer payload mtu.
func calculateNetworkMTU(linkMTU, networkHeaderSize uint32) (uint32, *tcpip.Error) {
	if linkMTU < header.IPv4MinimumMTU {
		return 0, tcpip.ErrInvalidEndpointState
	}

	// As per RFC 791 section 3.1, an IPv4 header cannot exceed 60 bytes in
	// length:
	//   The maximal internet header is 60 octets, and a typical internet header
	//   is 20 octets, allowing a margin for headers of higher level protocols.
	if networkHeaderSize > header.IPv4MaximumHeaderSize {
		return 0, tcpip.ErrMalformedHeader
	}

	networkMTU := linkMTU
	if networkMTU > MaxTotalSize {
		networkMTU = MaxTotalSize
	}

	return networkMTU - uint32(networkHeaderSize), nil
}

func packetMustBeFragmented(pkt *stack.PacketBuffer, networkMTU uint32, gso *stack.GSO) bool {
	payload := pkt.TransportHeader().View().Size() + pkt.Data.Size()
	return (gso == nil || gso.Type == stack.GSONone) && uint32(payload) > networkMTU
}

// addressToUint32 translates an IPv4 address into its little endian uint32
// representation.
//
// This function does the same thing as binary.LittleEndian.Uint32 but operates
// on a tcpip.Address (a string) without the need to convert it to a byte slice,
// which would cause an allocation.
func addressToUint32(addr tcpip.Address) uint32 {
	_ = addr[3] // bounds check hint to compiler
	return uint32(addr[0]) | uint32(addr[1])<<8 | uint32(addr[2])<<16 | uint32(addr[3])<<24
}

// hashRoute calculates a hash value for the given route. It uses the source &
// destination address, the transport protocol number and a 32-bit number to
// generate the hash.
func hashRoute(r *stack.Route, protocol tcpip.TransportProtocolNumber, hashIV uint32) uint32 {
	a := addressToUint32(r.LocalAddress)
	b := addressToUint32(r.RemoteAddress)
	return hash.Hash3Words(a, b, uint32(protocol), hashIV)
}

// NewProtocol returns an IPv4 network protocol.
func NewProtocol(s *stack.Stack) stack.NetworkProtocol {
	ids := make([]uint32, buckets)

	// Randomly initialize hashIV and the ids.
	r := hash.RandN32(1 + buckets)
	for i := range ids {
		ids[i] = r[i]
	}
	hashIV := r[buckets]

	return &protocol{
		stack:         s,
		ids:           ids,
		hashIV:        hashIV,
		defaultTTL:    DefaultTTL,
		fragmentation: fragmentation.NewFragmentation(fragmentblockSize, fragmentation.HighFragThreshold, fragmentation.LowFragThreshold, ReassembleTimeout, s.Clock()),
	}
}

func buildNextFragment(pf *fragmentation.PacketFragmenter, originalIPHeader header.IPv4) (*stack.PacketBuffer, bool) {
	fragPkt, offset, copied, more := pf.BuildNextFragment()
	fragPkt.NetworkProtocolNumber = ProtocolNumber

	originalIPHeaderLength := len(originalIPHeader)
	nextFragIPHeader := header.IPv4(fragPkt.NetworkHeader().Push(originalIPHeaderLength))
	fragPkt.NetworkProtocolNumber = ProtocolNumber

	if copied := copy(nextFragIPHeader, originalIPHeader); copied != len(originalIPHeader) {
		panic(fmt.Sprintf("wrong number of bytes copied into fragmentIPHeaders: got = %d, want = %d", copied, originalIPHeaderLength))
	}

	flags := originalIPHeader.Flags()
	if more {
		flags |= header.IPv4FlagMoreFragments
	}
	nextFragIPHeader.SetFlagsFragmentOffset(flags, uint16(offset))
	nextFragIPHeader.SetTotalLength(uint16(nextFragIPHeader.HeaderLength()) + uint16(copied))
	nextFragIPHeader.SetChecksum(0)
	nextFragIPHeader.SetChecksum(^nextFragIPHeader.CalculateChecksum())

	return fragPkt, more
}

// optionAction describes possible actions that may be taken on an option
// while processing it.
type optionAction uint8

const (
	// optionRemove says that the option should not be in the output option set.
	optionRemove optionAction = iota

	// optionProcess says that the option should be fully processed.
	optionProcess

	// optionVerify says the option should be checked and passed unchanged.
	optionVerify

	// optionPass says to pass the output set without checking.
	optionPass
)

// optionActions list what to do for each option in a given scenario.
type optionActions struct {
	// timestamp controls what to do with a Timestamp option.
	timestamp optionAction

	// recordroute controls what to do with a Record Route option.
	recordRoute optionAction

	// unknown controls what to do with an unknown option.
	unknown optionAction
}

// optionsUsage specifies the ways options may be operated upon for a given
// scenario during packet processing.
type optionsUsage interface {
	actions() optionActions
}

// optionUsageReceive implements optionsUsage for received packets.
type optionUsageReceive struct{}

// actions implements optionsUsage.
func (*optionUsageReceive) actions() optionActions {
	return optionActions{
		timestamp:   optionVerify,
		recordRoute: optionVerify,
		unknown:     optionPass,
	}
}

// TODO(gvisor.dev/issue/4586): Add an entry here for forwarding when it
// is enabled (Process, Process, Pass) and for fragmenting (Process, Process,
// Pass for frag1, but Remove,Remove,Remove for all other frags).

// optionUsageEcho implements optionsUsage for echo packet processing.
type optionUsageEcho struct{}

// actions implements optionsUsage.
func (*optionUsageEcho) actions() optionActions {
	return optionActions{
		timestamp:   optionProcess,
		recordRoute: optionProcess,
		unknown:     optionRemove,
	}
}

var (
	errIPv4TimestampOptInvalidLength  = errors.New("invalid Timestamp length")
	errIPv4TimestampOptInvalidPointer = errors.New("invalid Timestamp pointer")
	errIPv4TimestampOptOverflow       = errors.New("overflow in Timestamp")
	errIPv4TimestampOptInvalidFlags   = errors.New("invalid Timestamp flags")
)

// handleTimestamp does any required processing on a Timestamp option
// in place.
func handleTimestamp(tsOpt header.IPv4OptionTimestamp, localAddress tcpip.Address, clock tcpip.Clock, usage optionsUsage) (uint8, error) {
	flags := tsOpt.Flags()
	var entrySize uint8
	switch flags {
	case header.IPv4OptionTimestampOnlyFlag:
		entrySize = header.IPv4OptionTimestampSize
	case
		header.IPv4OptionTimestampWithIPFlag,
		header.IPv4OptionTimestampWithPredefinedIPFlag:
		entrySize = header.IPv4OptionTimestampWithAddrSize
	default:
		return header.IPv4OptTSOFLWAndFLGOffset, errIPv4TimestampOptInvalidFlags
	}

	pointer := tsOpt.Pointer()
	// To simplify processing below, base further work on the array of timestamps
	// beyond the header, rather than on the whole option. Also to aid
	// calculations set 'nextSlot' to be 0 based as in the packet it is 1 based.
	nextSlot := pointer - (header.IPv4OptionTimestampHdrLength + 1)
	optLen := tsOpt.Size()
	dataLength := optLen - header.IPv4OptionTimestampHdrLength

	// In the section below, we verify the pointer, length and overflow counter
	// fields of the option. The distinction is in which byte you return as being
	// in error in the ICMP packet. Offsets 1 (length), 2 pointer)
	// or 3 (overflowed counter).
	//
	// The following RFC sections cover this section:
	//
	// RFC 791 (page 22):
	//    If there is some room but not enough room for a full timestamp
	//    to be inserted, or the overflow count itself overflows, the
	//    original datagram is considered to be in error and is discarded.
	//    In either case an ICMP parameter problem message may be sent to
	//    the source host [3].
	//
	// You can get this situation in two ways. Firstly if the data area is not
	// a multiple of the entry size or secondly, if the pointer is not at a
	// multiple of the entry size. The wording of the RFC suggests that
	// this is not an error until you actually run out of space.
	if pointer > optLen {
		// RFC 791 (page 22) says we should switch to using the overflow count.
		//    If the timestamp data area is already full (the pointer exceeds
		//    the length) the datagram is forwarded without inserting the
		//    timestamp, but the overflow count is incremented by one.
		if flags == header.IPv4OptionTimestampWithPredefinedIPFlag {
			// By definition we have nothing to do.
			return 0, nil
		}

		if tsOpt.IncOverflow() != 0 {
			return 0, nil
		}
		// The overflow count is also full.
		return header.IPv4OptTSOFLWAndFLGOffset, errIPv4TimestampOptOverflow
	}
	if nextSlot+entrySize > dataLength {
		// The data area isn't full but there isn't room for a new entry.
		// Either Length or Pointer could be bad.
		if false {
			// We must select Pointer for Linux compatibility, even if
			// only the length is bad.
			// The Linux code is at (in October 2020)
			// https://github.com/torvalds/linux/blob/bbf5c979011a099af5dc76498918ed7df445635b/net/ipv4/ip_options.c#L367-L370
			//		if (optptr[2]+3 > optlen) {
			//			pp_ptr = optptr + 2;
			//			goto error;
			//		}
			// which doesn't distinguish between which of optptr[2] or optlen
			// is wrong, but just arbitrarily decides on optptr+2.
			if dataLength%entrySize != 0 {
				// The Data section size should be a multiple of the expected
				// timestamp entry size.
				return header.IPv4OptionLengthOffset, errIPv4TimestampOptInvalidLength
			}
			// If the size is OK, the pointer must be corrupted.
		}
		return header.IPv4OptTSPointerOffset, errIPv4TimestampOptInvalidPointer
	}

	if usage.actions().timestamp == optionProcess {
		tsOpt.UpdateTimestamp(localAddress, clock)
	}
	return 0, nil
}

var (
	errIPv4RecordRouteOptInvalidLength  = errors.New("invalid length in Record Route")
	errIPv4RecordRouteOptInvalidPointer = errors.New("invalid pointer in Record Route")
)

// handleRecordRoute checks and processes a Record route option. It is much
// like the timestamp type 1 option, but without timestamps. The passed in
// address is stored in the option in the correct spot if possible.
func handleRecordRoute(rrOpt header.IPv4OptionRecordRoute, localAddress tcpip.Address, usage optionsUsage) (uint8, error) {
	optlen := rrOpt.Size()

	if optlen < header.IPv4AddressSize+header.IPv4OptionRecordRouteHdrLength {
		return header.IPv4OptionLengthOffset, errIPv4RecordRouteOptInvalidLength
	}

	nextSlot := rrOpt.Pointer() - 1 // Pointer is 1 based.

	// RFC 791 page 21 says
	//       If the route data area is already full (the pointer exceeds the
	//       length) the datagram is forwarded without inserting the address
	//       into the recorded route. If there is some room but not enough
	//       room for a full address to be inserted, the original datagram is
	//       considered to be in error and is discarded.  In either case an
	//       ICMP parameter problem message may be sent to the source
	//       host.
	// The use of the words "In either case" suggests that a 'full' RR option
	// could generate an ICMP at every hop after it fills up. We chose to not
	// do this (as do most implementations). It is probable that the inclusion
	// of these words is a copy/paste error from the timestamp option where
	// there are two failure reasons given.
	if nextSlot >= optlen {
		return 0, nil
	}

	// The data area isn't full but there isn't room for a new entry.
	// Either Length or Pointer could be bad. We must select Pointer for Linux
	// compatibility, even if only the length is bad.
	if nextSlot+header.IPv4AddressSize > optlen {
		if false {
			// This is what we would do if we were not being Linux compatible.
			// Check for bad pointer or length value. Must be a multiple of 4 after
			// accounting for the 3 byte header and not within that header.
			// RFC 791, page 20 says:
			//       The pointer is relative to this option, and the
			//       smallest legal value for the pointer is 4.
			//
			//       A recorded route is composed of a series of internet addresses.
			//       Each internet address is 32 bits or 4 octets.
			// Linux skips this test so we must too.  See Linux code at:
			// https://github.com/torvalds/linux/blob/bbf5c979011a099af5dc76498918ed7df445635b/net/ipv4/ip_options.c#L338-L341
			//    if (optptr[2]+3 > optlen) {
			//      pp_ptr = optptr + 2;
			//      goto error;
			//    }
			if (optlen-header.IPv4OptionRecordRouteHdrLength)%header.IPv4AddressSize != 0 {
				// Length is bad, not on integral number of slots.
				return header.IPv4OptionLengthOffset, errIPv4RecordRouteOptInvalidLength
			}
			// If not length, the fault must be with the pointer.
		}
		return header.IPv4OptRRPointerOffset, errIPv4RecordRouteOptInvalidPointer
	}
	if usage.actions().recordRoute == optionVerify {
		return 0, nil
	}
	rrOpt.StoreAddress(localAddress)
	return 0, nil
}

// processIPOptions parses the IPv4 options and produces a new set of options
// suitable for use in the next step of packet processing as informed by usage.
// The original will not be touched.
//
// Returns
// - The location of an error if there was one (or 0 if no error)
// - If there is an error, information as to what it was was.
// - The replacement option set.
func (e *endpoint) processIPOptions(pkt *stack.PacketBuffer, orig header.IPv4Options, usage optionsUsage) (uint8, header.IPv4Options, error) {
	stats := e.protocol.stack.Stats()
	opts := header.IPv4Options(orig)
	optIter := opts.MakeIterator()

	// Each option other than NOP must only appear (RFC 791 section 3.1, at the
	// definition of every type). Keep track of each of the possible types in
	// the 8 bit 'type' field.
	var seenOptions [math.MaxUint8 + 1]bool

	// TODO(gvisor.dev/issue/4586):
	// This will need tweaking  when we start really forwarding packets
	// as we may need to get two addresses, for rx and tx interfaces.
	// We will also have to take usage into account.
	prefixedAddress, err := e.protocol.stack.GetMainNICAddress(e.nic.ID(), ProtocolNumber)
	localAddress := prefixedAddress.Address
	if err != nil {
		h := header.IPv4(pkt.NetworkHeader().View())
		dstAddr := h.DestinationAddress()
		if pkt.NetworkPacketInfo.LocalAddressBroadcast || header.IsV4MulticastAddress(dstAddr) {
			return 0 /* errCursor */, nil, header.ErrIPv4OptionAddress
		}
		localAddress = dstAddr
	}

	for {
		option, done, err := optIter.Next()
		if done || err != nil {
			return optIter.ErrCursor, optIter.Finalize(), err
		}
		optType := option.Type()
		if optType == header.IPv4OptionNOPType {
			optIter.PushNOPOrEnd(optType)
			continue
		}
		if optType == header.IPv4OptionListEndType {
			optIter.PushNOPOrEnd(optType)
			return 0 /* errCursor */, optIter.Finalize(), nil /* err */
		}

		// check for repeating options (multiple NOPs are OK)
		if seenOptions[optType] {
			return optIter.ErrCursor, nil, header.ErrIPv4OptDuplicate
		}
		seenOptions[optType] = true

		optLen := int(option.Size())
		switch option := option.(type) {
		case *header.IPv4OptionTimestamp:
			stats.IP.OptionTSReceived.Increment()
			if usage.actions().timestamp != optionRemove {
				clock := e.protocol.stack.Clock()
				newBuffer := optIter.RemainingBuffer()[:len(*option)]
				_ = copy(newBuffer, option.Contents())
				offset, err := handleTimestamp(header.IPv4OptionTimestamp(newBuffer), localAddress, clock, usage)
				if err != nil {
					return optIter.ErrCursor + offset, nil, err
				}
				optIter.ConsumeBuffer(optLen)
			}

		case *header.IPv4OptionRecordRoute:
			stats.IP.OptionRRReceived.Increment()
			if usage.actions().recordRoute != optionRemove {
				newBuffer := optIter.RemainingBuffer()[:len(*option)]
				_ = copy(newBuffer, option.Contents())
				offset, err := handleRecordRoute(header.IPv4OptionRecordRoute(newBuffer), localAddress, usage)
				if err != nil {
					return optIter.ErrCursor + offset, nil, err
				}
				optIter.ConsumeBuffer(optLen)
			}

		default:
			stats.IP.OptionUnknownReceived.Increment()
			if usage.actions().unknown == optionPass {
				newBuffer := optIter.RemainingBuffer()[:optLen]
				// Arguments already heavily checked.. ignore result.
				_ = copy(newBuffer, option.Contents())
				optIter.ConsumeBuffer(optLen)
			}
		}
	}
}