// Copyright 2018 The gVisor Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

// +build linux

package fdbased

import (
	"golang.org/x/sys/unix"
	"gvisor.dev/gvisor/pkg/tcpip"
	"gvisor.dev/gvisor/pkg/tcpip/buffer"
	"gvisor.dev/gvisor/pkg/tcpip/header"
	"gvisor.dev/gvisor/pkg/tcpip/link/rawfile"
	"gvisor.dev/gvisor/pkg/tcpip/stack"
)

// BufConfig defines the shape of the vectorised view used to read packets from the NIC.
var BufConfig = []int{128, 256, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768}

type iovecBuffer struct {
	// views are the actual buffers that hold the packet contents.
	views []buffer.View

	// iovecs are initialized with base pointers/len of the corresponding
	// entries in the views defined above, except when GSO is enabled
	// (skipsVnetHdr) then the first iovec points to a buffer for the vnet header
	// which is stripped before the views are passed up the stack for further
	// processing.
	iovecs []unix.Iovec

	// sizes is an array of buffer sizes for the underlying views. sizes is
	// immutable.
	sizes []int

	// skipsVnetHdr is true if virtioNetHdr is to skipped.
	skipsVnetHdr bool
}

func newIovecBuffer(sizes []int, skipsVnetHdr bool) *iovecBuffer {
	b := &iovecBuffer{
		views:        make([]buffer.View, len(sizes)),
		sizes:        sizes,
		skipsVnetHdr: skipsVnetHdr,
	}
	niov := len(b.views)
	if b.skipsVnetHdr {
		niov++
	}
	b.iovecs = make([]unix.Iovec, niov)
	return b
}

func (b *iovecBuffer) nextIovecs() []unix.Iovec {
	vnetHdrOff := 0
	if b.skipsVnetHdr {
		var vnetHdr [virtioNetHdrSize]byte
		// The kernel adds virtioNetHdr before each packet, but
		// we don't use it, so so we allocate a buffer for it,
		// add it in iovecs but don't add it in a view.
		b.iovecs[0] = unix.Iovec{Base: &vnetHdr[0]}
		b.iovecs[0].SetLen(virtioNetHdrSize)
		vnetHdrOff++
	}
	for i := range b.views {
		if b.views[i] != nil {
			break
		}
		v := buffer.NewView(b.sizes[i])
		b.views[i] = v
		b.iovecs[i+vnetHdrOff] = unix.Iovec{Base: &v[0]}
		b.iovecs[i+vnetHdrOff].SetLen(len(v))
	}
	return b.iovecs
}

func (b *iovecBuffer) pullViews(n int) buffer.VectorisedView {
	var views []buffer.View
	c := 0
	if b.skipsVnetHdr {
		c += virtioNetHdrSize
		if c >= n {
			// Nothing in the packet.
			return buffer.NewVectorisedView(0, nil)
		}
	}
	for i, v := range b.views {
		c += len(v)
		if c >= n {
			b.views[i].CapLength(len(v) - (c - n))
			views = append([]buffer.View(nil), b.views[:i+1]...)
			break
		}
	}
	// Remove the first len(views) used views from the state.
	for i := range views {
		b.views[i] = nil
	}
	if b.skipsVnetHdr {
		// Exclude the size of the vnet header.
		n -= virtioNetHdrSize
	}
	return buffer.NewVectorisedView(n, views)
}

// readVDispatcher uses readv() system call to read inbound packets and
// dispatches them.
type readVDispatcher struct {
	// fd is the file descriptor used to send and receive packets.
	fd int

	// e is the endpoint this dispatcher is attached to.
	e *endpoint

	// buf is the iovec buffer that contains the packet contents.
	buf *iovecBuffer
}

func newReadVDispatcher(fd int, e *endpoint) (linkDispatcher, error) {
	d := &readVDispatcher{fd: fd, e: e}
	skipsVnetHdr := d.e.Capabilities()&stack.CapabilityHardwareGSO != 0
	d.buf = newIovecBuffer(BufConfig, skipsVnetHdr)
	return d, nil
}

// dispatch reads one packet from the file descriptor and dispatches it.
func (d *readVDispatcher) dispatch() (bool, tcpip.Error) {
	n, err := rawfile.BlockingReadv(d.fd, d.buf.nextIovecs())
	if n == 0 || err != nil {
		return false, err
	}

	pkt := stack.NewPacketBuffer(stack.PacketBufferOptions{
		Data: d.buf.pullViews(n),
	})

	var (
		p             tcpip.NetworkProtocolNumber
		remote, local tcpip.LinkAddress
	)
	if d.e.hdrSize > 0 {
		hdr, ok := pkt.LinkHeader().Consume(d.e.hdrSize)
		if !ok {
			return false, nil
		}
		eth := header.Ethernet(hdr)
		p = eth.Type()
		remote = eth.SourceAddress()
		local = eth.DestinationAddress()
	} else {
		// We don't get any indication of what the packet is, so try to guess
		// if it's an IPv4 or IPv6 packet.
		// IP version information is at the first octet, so pulling up 1 byte.
		h, ok := pkt.Data().PullUp(1)
		if !ok {
			return true, nil
		}
		switch header.IPVersion(h) {
		case header.IPv4Version:
			p = header.IPv4ProtocolNumber
		case header.IPv6Version:
			p = header.IPv6ProtocolNumber
		default:
			return true, nil
		}
	}

	d.e.dispatcher.DeliverNetworkPacket(remote, local, p, pkt)

	return true, nil
}

// recvMMsgDispatcher uses the recvmmsg system call to read inbound packets and
// dispatches them.
type recvMMsgDispatcher struct {
	// fd is the file descriptor used to send and receive packets.
	fd int

	// e is the endpoint this dispatcher is attached to.
	e *endpoint

	// bufs is an array of iovec buffers that contain packet contents.
	bufs []*iovecBuffer

	// msgHdrs is an array of MMsgHdr objects where each MMsghdr is used to
	// reference an array of iovecs in the iovecs field defined above.  This
	// array is passed as the parameter to recvmmsg call to retrieve
	// potentially more than 1 packet per unix.
	msgHdrs []rawfile.MMsgHdr
}

const (
	// MaxMsgsPerRecv is the maximum number of packets we want to retrieve
	// in a single RecvMMsg call.
	MaxMsgsPerRecv = 8
)

func newRecvMMsgDispatcher(fd int, e *endpoint) (linkDispatcher, error) {
	d := &recvMMsgDispatcher{
		fd:      fd,
		e:       e,
		bufs:    make([]*iovecBuffer, MaxMsgsPerRecv),
		msgHdrs: make([]rawfile.MMsgHdr, MaxMsgsPerRecv),
	}
	skipsVnetHdr := d.e.Capabilities()&stack.CapabilityHardwareGSO != 0
	for i := range d.bufs {
		d.bufs[i] = newIovecBuffer(BufConfig, skipsVnetHdr)
	}
	return d, nil
}

// recvMMsgDispatch reads more than one packet at a time from the file
// descriptor and dispatches it.
func (d *recvMMsgDispatcher) dispatch() (bool, tcpip.Error) {
	// Fill message headers.
	for k := range d.msgHdrs {
		if d.msgHdrs[k].Msg.Iovlen > 0 {
			break
		}
		iovecs := d.bufs[k].nextIovecs()
		iovLen := len(iovecs)
		d.msgHdrs[k].Len = 0
		d.msgHdrs[k].Msg.Iov = &iovecs[0]
		d.msgHdrs[k].Msg.SetIovlen(iovLen)
	}

	nMsgs, err := rawfile.BlockingRecvMMsg(d.fd, d.msgHdrs)
	if err != nil {
		return false, err
	}
	// Process each of received packets.
	for k := 0; k < nMsgs; k++ {
		n := int(d.msgHdrs[k].Len)

		pkt := stack.NewPacketBuffer(stack.PacketBufferOptions{
			Data: d.bufs[k].pullViews(n),
		})

		// Mark that this iovec has been processed.
		d.msgHdrs[k].Msg.Iovlen = 0

		var (
			p             tcpip.NetworkProtocolNumber
			remote, local tcpip.LinkAddress
		)
		if d.e.hdrSize > 0 {
			hdr, ok := pkt.LinkHeader().Consume(d.e.hdrSize)
			if !ok {
				return false, nil
			}
			eth := header.Ethernet(hdr)
			p = eth.Type()
			remote = eth.SourceAddress()
			local = eth.DestinationAddress()
		} else {
			// We don't get any indication of what the packet is, so try to guess
			// if it's an IPv4 or IPv6 packet.
			// IP version information is at the first octet, so pulling up 1 byte.
			h, ok := pkt.Data().PullUp(1)
			if !ok {
				// Skip this packet.
				continue
			}
			switch header.IPVersion(h) {
			case header.IPv4Version:
				p = header.IPv4ProtocolNumber
			case header.IPv6Version:
				p = header.IPv6ProtocolNumber
			default:
				// Skip this packet.
				continue
			}
		}

		d.e.dispatcher.DeliverNetworkPacket(remote, local, p, pkt)
	}

	return true, nil
}