// Copyright 2018 The gVisor Authors. // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. package header import ( "encoding/binary" "errors" "fmt" "gvisor.dev/gvisor/pkg/tcpip" ) // RFC 971 defines the fields of the IPv4 header on page 11 using the following // diagram: ("Figure 4") // 0 1 2 3 // 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 // +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ // |Version| IHL |Type of Service| Total Length | // +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ // | Identification |Flags| Fragment Offset | // +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ // | Time to Live | Protocol | Header Checksum | // +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ // | Source Address | // +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ // | Destination Address | // +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ // | Options | Padding | // +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ const ( versIHL = 0 tos = 1 // IPv4TotalLenOffset is the offset of the total length field in the // IPv4 header. IPv4TotalLenOffset = 2 id = 4 flagsFO = 6 ttl = 8 protocol = 9 checksum = 10 srcAddr = 12 dstAddr = 16 options = 20 ) // IPv4Fields contains the fields of an IPv4 packet. It is used to describe the // fields of a packet that needs to be encoded. The IHL field is not here as // it is totally defined by the size of the options. type IPv4Fields struct { // TOS is the "type of service" field of an IPv4 packet. TOS uint8 // TotalLength is the "total length" field of an IPv4 packet. TotalLength uint16 // ID is the "identification" field of an IPv4 packet. ID uint16 // Flags is the "flags" field of an IPv4 packet. Flags uint8 // FragmentOffset is the "fragment offset" field of an IPv4 packet. FragmentOffset uint16 // TTL is the "time to live" field of an IPv4 packet. TTL uint8 // Protocol is the "protocol" field of an IPv4 packet. Protocol uint8 // Checksum is the "checksum" field of an IPv4 packet. Checksum uint16 // SrcAddr is the "source ip address" of an IPv4 packet. SrcAddr tcpip.Address // DstAddr is the "destination ip address" of an IPv4 packet. DstAddr tcpip.Address // Options must be 40 bytes or less as they must fit along with the // rest of the IPv4 header into the maximum size describable in the // IHL field. RFC 791 section 3.1 says: // IHL: 4 bits // // Internet Header Length is the length of the internet header in 32 // bit words, and thus points to the beginning of the data. Note that // the minimum value for a correct header is 5. // // That leaves ten 32 bit (4 byte) fields for options. An attempt to encode // more will fail. Options IPv4Options } // IPv4 is an IPv4 header. // Most of the methods of IPv4 access to the underlying slice without // checking the boundaries and could panic because of 'index out of range'. // Always call IsValid() to validate an instance of IPv4 before using other // methods. type IPv4 []byte const ( // IPv4MinimumSize is the minimum size of a valid IPv4 packet; // i.e. a packet header with no options. IPv4MinimumSize = 20 // IPv4MaximumHeaderSize is the maximum size of an IPv4 header. Given // that there are only 4 bits (max 0xF (15)) to represent the header length // in 32-bit (4 byte) units, the header cannot exceed 15*4 = 60 bytes. IPv4MaximumHeaderSize = 60 // IPv4MaximumOptionsSize is the largest size the IPv4 options can be. IPv4MaximumOptionsSize = IPv4MaximumHeaderSize - IPv4MinimumSize // IPv4MaximumPayloadSize is the maximum size of a valid IPv4 payload. // // Linux limits this to 65,515 octets (the max IP datagram size - the IPv4 // header size). But RFC 791 section 3.2 discusses the design of the IPv4 // fragment "allows 2**13 = 8192 fragments of 8 octets each for a total of // 65,536 octets. Note that this is consistent with the datagram total // length field (of course, the header is counted in the total length and not // in the fragments)." IPv4MaximumPayloadSize = 65536 // MinIPFragmentPayloadSize is the minimum number of payload bytes that // the first fragment must carry when an IPv4 packet is fragmented. MinIPFragmentPayloadSize = 8 // IPv4AddressSize is the size, in bytes, of an IPv4 address. IPv4AddressSize = 4 // IPv4ProtocolNumber is IPv4's network protocol number. IPv4ProtocolNumber tcpip.NetworkProtocolNumber = 0x0800 // IPv4Version is the version of the IPv4 protocol. IPv4Version = 4 // IPv4AllSystems is the all systems IPv4 multicast address as per // IANA's IPv4 Multicast Address Space Registry. See // https://www.iana.org/assignments/multicast-addresses/multicast-addresses.xhtml. IPv4AllSystems tcpip.Address = "\xe0\x00\x00\x01" // IPv4Broadcast is the broadcast address of the IPv4 procotol. IPv4Broadcast tcpip.Address = "\xff\xff\xff\xff" // IPv4Any is the non-routable IPv4 "any" meta address. IPv4Any tcpip.Address = "\x00\x00\x00\x00" // IPv4MinimumProcessableDatagramSize is the minimum size of an IP // packet that every IPv4 capable host must be able to // process/reassemble. IPv4MinimumProcessableDatagramSize = 576 // IPv4MinimumMTU is the minimum MTU required by IPv4, per RFC 791, // section 3.2: // Every internet module must be able to forward a datagram of 68 octets // without further fragmentation. This is because an internet header may be // up to 60 octets, and the minimum fragment is 8 octets. IPv4MinimumMTU = 68 ) // Flags that may be set in an IPv4 packet. const ( IPv4FlagMoreFragments = 1 << iota IPv4FlagDontFragment ) // IPv4EmptySubnet is the empty IPv4 subnet. var IPv4EmptySubnet = func() tcpip.Subnet { subnet, err := tcpip.NewSubnet(IPv4Any, tcpip.AddressMask(IPv4Any)) if err != nil { panic(err) } return subnet }() // IPVersion returns the version of IP used in the given packet. It returns -1 // if the packet is not large enough to contain the version field. func IPVersion(b []byte) int { // Length must be at least offset+length of version field. if len(b) < versIHL+1 { return -1 } return int(b[versIHL] >> ipVersionShift) } // RFC 791 page 11 shows the header length (IHL) is in the lower 4 bits // of the first byte, and is counted in multiples of 4 bytes. // // 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 // +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ // |Version| IHL |Type of Service| Total Length | // +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ // (...) // Version: 4 bits // The Version field indicates the format of the internet header. This // document describes version 4. // // IHL: 4 bits // Internet Header Length is the length of the internet header in 32 // bit words, and thus points to the beginning of the data. Note that // the minimum value for a correct header is 5. const ( ipVersionShift = 4 ipIHLMask = 0x0f IPv4IHLStride = 4 ) // HeaderLength returns the value of the "header length" field of the IPv4 // header. The length returned is in bytes. func (b IPv4) HeaderLength() uint8 { return (b[versIHL] & ipIHLMask) * IPv4IHLStride } // SetHeaderLength sets the value of the "Internet Header Length" field. func (b IPv4) SetHeaderLength(hdrLen uint8) { if hdrLen > IPv4MaximumHeaderSize { panic(fmt.Sprintf("got IPv4 Header size = %d, want <= %d", hdrLen, IPv4MaximumHeaderSize)) } b[versIHL] = (IPv4Version << ipVersionShift) | ((hdrLen / IPv4IHLStride) & ipIHLMask) } // ID returns the value of the identifier field of the IPv4 header. func (b IPv4) ID() uint16 { return binary.BigEndian.Uint16(b[id:]) } // Protocol returns the value of the protocol field of the IPv4 header. func (b IPv4) Protocol() uint8 { return b[protocol] } // Flags returns the "flags" field of the IPv4 header. func (b IPv4) Flags() uint8 { return uint8(binary.BigEndian.Uint16(b[flagsFO:]) >> 13) } // More returns whether the more fragments flag is set. func (b IPv4) More() bool { return b.Flags()&IPv4FlagMoreFragments != 0 } // TTL returns the "TTL" field of the IPv4 header. func (b IPv4) TTL() uint8 { return b[ttl] } // FragmentOffset returns the "fragment offset" field of the IPv4 header. func (b IPv4) FragmentOffset() uint16 { return binary.BigEndian.Uint16(b[flagsFO:]) << 3 } // TotalLength returns the "total length" field of the IPv4 header. func (b IPv4) TotalLength() uint16 { return binary.BigEndian.Uint16(b[IPv4TotalLenOffset:]) } // Checksum returns the checksum field of the IPv4 header. func (b IPv4) Checksum() uint16 { return binary.BigEndian.Uint16(b[checksum:]) } // SourceAddress returns the "source address" field of the IPv4 header. func (b IPv4) SourceAddress() tcpip.Address { return tcpip.Address(b[srcAddr : srcAddr+IPv4AddressSize]) } // DestinationAddress returns the "destination address" field of the IPv4 // header. func (b IPv4) DestinationAddress() tcpip.Address { return tcpip.Address(b[dstAddr : dstAddr+IPv4AddressSize]) } // IPv4Options is a buffer that holds all the raw IP options. type IPv4Options []byte // SizeWithPadding implements stack.NetOptions. // It reports the size to allocate for the Options. RFC 791 page 23 (end of // section 3.1) says of the padding at the end of the options: // The internet header padding is used to ensure that the internet // header ends on a 32 bit boundary. func (o IPv4Options) SizeWithPadding() int { return (len(o) + IPv4IHLStride - 1) & ^(IPv4IHLStride - 1) } // Options returns a buffer holding the options. func (b IPv4) Options() IPv4Options { hdrLen := b.HeaderLength() return IPv4Options(b[options:hdrLen:hdrLen]) } // TransportProtocol implements Network.TransportProtocol. func (b IPv4) TransportProtocol() tcpip.TransportProtocolNumber { return tcpip.TransportProtocolNumber(b.Protocol()) } // Payload implements Network.Payload. func (b IPv4) Payload() []byte { return b[b.HeaderLength():][:b.PayloadLength()] } // PayloadLength returns the length of the payload portion of the IPv4 packet. func (b IPv4) PayloadLength() uint16 { return b.TotalLength() - uint16(b.HeaderLength()) } // TOS returns the "type of service" field of the IPv4 header. func (b IPv4) TOS() (uint8, uint32) { return b[tos], 0 } // SetTOS sets the "type of service" field of the IPv4 header. func (b IPv4) SetTOS(v uint8, _ uint32) { b[tos] = v } // SetTTL sets the "Time to Live" field of the IPv4 header. func (b IPv4) SetTTL(v byte) { b[ttl] = v } // SetTotalLength sets the "total length" field of the IPv4 header. func (b IPv4) SetTotalLength(totalLength uint16) { binary.BigEndian.PutUint16(b[IPv4TotalLenOffset:], totalLength) } // SetChecksum sets the checksum field of the IPv4 header. func (b IPv4) SetChecksum(v uint16) { binary.BigEndian.PutUint16(b[checksum:], v) } // SetFlagsFragmentOffset sets the "flags" and "fragment offset" fields of the // IPv4 header. func (b IPv4) SetFlagsFragmentOffset(flags uint8, offset uint16) { v := (uint16(flags) << 13) | (offset >> 3) binary.BigEndian.PutUint16(b[flagsFO:], v) } // SetID sets the identification field. func (b IPv4) SetID(v uint16) { binary.BigEndian.PutUint16(b[id:], v) } // SetSourceAddress sets the "source address" field of the IPv4 header. func (b IPv4) SetSourceAddress(addr tcpip.Address) { copy(b[srcAddr:srcAddr+IPv4AddressSize], addr) } // SetDestinationAddress sets the "destination address" field of the IPv4 // header. func (b IPv4) SetDestinationAddress(addr tcpip.Address) { copy(b[dstAddr:dstAddr+IPv4AddressSize], addr) } // CalculateChecksum calculates the checksum of the IPv4 header. func (b IPv4) CalculateChecksum() uint16 { return Checksum(b[:b.HeaderLength()], 0) } // Encode encodes all the fields of the IPv4 header. func (b IPv4) Encode(i *IPv4Fields) { // The size of the options defines the size of the whole header and thus the // IHL field. Options are rare and this is a heavily used function so it is // worth a bit of optimisation here to keep the copy out of the fast path. hdrLen := IPv4MinimumSize if len(i.Options) != 0 { // SizeWithPadding is always >= len(i.Options). aLen := i.Options.SizeWithPadding() hdrLen += aLen if hdrLen > len(b) { panic(fmt.Sprintf("encode received %d bytes, wanted >= %d", len(b), hdrLen)) } opts := b[options:] // This avoids bounds checks on the next line(s) which would happen even // if there's no work to do. if n := copy(opts, i.Options); n != aLen { padding := opts[n:][:aLen-n] for i := range padding { padding[i] = 0 } } } b.SetHeaderLength(uint8(hdrLen)) b[tos] = i.TOS b.SetTotalLength(i.TotalLength) binary.BigEndian.PutUint16(b[id:], i.ID) b.SetFlagsFragmentOffset(i.Flags, i.FragmentOffset) b[ttl] = i.TTL b[protocol] = i.Protocol b.SetChecksum(i.Checksum) copy(b[srcAddr:srcAddr+IPv4AddressSize], i.SrcAddr) copy(b[dstAddr:dstAddr+IPv4AddressSize], i.DstAddr) } // EncodePartial updates the total length and checksum fields of IPv4 header, // taking in the partial checksum, which is the checksum of the header without // the total length and checksum fields. It is useful in cases when similar // packets are produced. func (b IPv4) EncodePartial(partialChecksum, totalLength uint16) { b.SetTotalLength(totalLength) checksum := Checksum(b[IPv4TotalLenOffset:IPv4TotalLenOffset+2], partialChecksum) b.SetChecksum(^checksum) } // IsValid performs basic validation on the packet. func (b IPv4) IsValid(pktSize int) bool { if len(b) < IPv4MinimumSize { return false } hlen := int(b.HeaderLength()) tlen := int(b.TotalLength()) if hlen < IPv4MinimumSize || hlen > tlen || tlen > pktSize { return false } if IPVersion(b) != IPv4Version { return false } return true } // IsV4MulticastAddress determines if the provided address is an IPv4 multicast // address (range 224.0.0.0 to 239.255.255.255). The four most significant bits // will be 1110 = 0xe0. func IsV4MulticastAddress(addr tcpip.Address) bool { if len(addr) != IPv4AddressSize { return false } return (addr[0] & 0xf0) == 0xe0 } // IsV4LoopbackAddress determines if the provided address is an IPv4 loopback // address (belongs to 127.0.0.0/8 subnet). See RFC 1122 section 3.2.1.3. func IsV4LoopbackAddress(addr tcpip.Address) bool { if len(addr) != IPv4AddressSize { return false } return addr[0] == 0x7f } // ========================= Options ========================== // An IPv4OptionType can hold the valuse for the Type in an IPv4 option. type IPv4OptionType byte // These constants are needed to identify individual options in the option list. // While RFC 791 (page 31) says "Every internet module must be able to act on // every option." This has not generally been adhered to and some options have // very low rates of support. We do not support options other than those shown // below. const ( // IPv4OptionListEndType is the option type for the End Of Option List // option. Anything following is ignored. IPv4OptionListEndType IPv4OptionType = 0 // IPv4OptionNOPType is the No-Operation option. May appear between other // options and may appear multiple times. IPv4OptionNOPType IPv4OptionType = 1 // IPv4OptionRecordRouteType is used by each router on the path of the packet // to record its path. It is carried over to an Echo Reply. IPv4OptionRecordRouteType IPv4OptionType = 7 // IPv4OptionTimestampType is the option type for the Timestamp option. IPv4OptionTimestampType IPv4OptionType = 68 // ipv4OptionTypeOffset is the offset in an option of its type field. ipv4OptionTypeOffset = 0 // IPv4OptionLengthOffset is the offset in an option of its length field. IPv4OptionLengthOffset = 1 ) // Potential errors when parsing generic IP options. var ( ErrIPv4OptZeroLength = errors.New("zero length IP option") ErrIPv4OptDuplicate = errors.New("duplicate IP option") ErrIPv4OptInvalid = errors.New("invalid IP option") ErrIPv4OptMalformed = errors.New("malformed IP option") ErrIPv4OptionTruncated = errors.New("truncated IP option") ErrIPv4OptionAddress = errors.New("bad IP option address") ) // IPv4Option is an interface representing various option types. type IPv4Option interface { // Type returns the type identifier of the option. Type() IPv4OptionType // Size returns the size of the option in bytes. Size() uint8 // Contents returns a slice holding the contents of the option. Contents() []byte } var _ IPv4Option = (*IPv4OptionGeneric)(nil) // IPv4OptionGeneric is an IPv4 Option of unknown type. type IPv4OptionGeneric []byte // Type implements IPv4Option. func (o *IPv4OptionGeneric) Type() IPv4OptionType { return IPv4OptionType((*o)[ipv4OptionTypeOffset]) } // Size implements IPv4Option. func (o *IPv4OptionGeneric) Size() uint8 { return uint8(len(*o)) } // Contents implements IPv4Option. func (o *IPv4OptionGeneric) Contents() []byte { return []byte(*o) } // IPv4OptionIterator is an iterator pointing to a specific IP option // at any point of time. It also holds information as to a new options buffer // that we are building up to hand back to the caller. type IPv4OptionIterator struct { options IPv4Options // ErrCursor is where we are while parsing options. It is exported as any // resulting ICMP packet is supposed to have a pointer to the byte within // the IP packet where the error was detected. ErrCursor uint8 nextErrCursor uint8 newOptions [IPv4MaximumOptionsSize]byte writePoint int } // MakeIterator sets up and returns an iterator of options. It also sets up the // building of a new option set. func (o IPv4Options) MakeIterator() IPv4OptionIterator { return IPv4OptionIterator{ options: o, nextErrCursor: IPv4MinimumSize, } } // RemainingBuffer returns the remaining (unused) part of the new option buffer, // into which a new option may be written. func (i *IPv4OptionIterator) RemainingBuffer() IPv4Options { return IPv4Options(i.newOptions[i.writePoint:]) } // ConsumeBuffer marks a portion of the new buffer as used. func (i *IPv4OptionIterator) ConsumeBuffer(size int) { i.writePoint += size } // PushNOPOrEnd puts one of the single byte options onto the new options. // Only values 0 or 1 (ListEnd or NOP) are valid input. func (i *IPv4OptionIterator) PushNOPOrEnd(val IPv4OptionType) { if val > IPv4OptionNOPType { panic(fmt.Sprintf("invalid option type %d pushed onto option build buffer", val)) } i.newOptions[i.writePoint] = byte(val) i.writePoint++ } // Finalize returns the completed replacement options buffer padded // as needed. func (i *IPv4OptionIterator) Finalize() IPv4Options { // RFC 791 page 31 says: // The options might not end on a 32-bit boundary. The internet header // must be filled out with octets of zeros. The first of these would // be interpreted as the end-of-options option, and the remainder as // internet header padding. // Since the buffer is already zero filled we just need to step the write // pointer up to the next multiple of 4. options := IPv4Options(i.newOptions[:(i.writePoint+0x3) & ^0x3]) // Poison the write pointer. i.writePoint = len(i.newOptions) return options } // Next returns the next IP option in the buffer/list of IP options. // It returns // - A slice of bytes holding the next option or nil if there is error. // - A boolean which is true if parsing of all the options is complete. // - An error which is non-nil if an error condition was encountered. func (i *IPv4OptionIterator) Next() (IPv4Option, bool, error) { // The opts slice gets shorter as we process the options. When we have no // bytes left we are done. if len(i.options) == 0 { return nil, true, nil } i.ErrCursor = i.nextErrCursor optType := IPv4OptionType(i.options[ipv4OptionTypeOffset]) if optType == IPv4OptionNOPType || optType == IPv4OptionListEndType { optionBody := i.options[:1] i.options = i.options[1:] i.nextErrCursor = i.ErrCursor + 1 retval := IPv4OptionGeneric(optionBody) return &retval, false, nil } // There are no more single byte options defined. All the rest have a length // field so we need to sanity check it. if len(i.options) == 1 { return nil, true, ErrIPv4OptMalformed } optLen := i.options[IPv4OptionLengthOffset] if optLen == 0 { i.ErrCursor++ return nil, true, ErrIPv4OptZeroLength } if optLen == 1 { i.ErrCursor++ return nil, true, ErrIPv4OptMalformed } if optLen > uint8(len(i.options)) { i.ErrCursor++ return nil, true, ErrIPv4OptionTruncated } optionBody := i.options[:optLen] i.nextErrCursor = i.ErrCursor + optLen i.options = i.options[optLen:] // Check the length of some option types that we know. switch optType { case IPv4OptionTimestampType: if optLen < IPv4OptionTimestampHdrLength { i.ErrCursor++ return nil, true, ErrIPv4OptMalformed } retval := IPv4OptionTimestamp(optionBody) return &retval, false, nil case IPv4OptionRecordRouteType: if optLen < IPv4OptionRecordRouteHdrLength { i.ErrCursor++ return nil, true, ErrIPv4OptMalformed } retval := IPv4OptionRecordRoute(optionBody) return &retval, false, nil } retval := IPv4OptionGeneric(optionBody) return &retval, false, nil } // // IP Timestamp option - RFC 791 page 22. // +--------+--------+--------+--------+ // |01000100| length | pointer|oflw|flg| // +--------+--------+--------+--------+ // | internet address | // +--------+--------+--------+--------+ // | timestamp | // +--------+--------+--------+--------+ // | ... | // // Type = 68 // // The Option Length is the number of octets in the option counting // the type, length, pointer, and overflow/flag octets (maximum // length 40). // // The Pointer is the number of octets from the beginning of this // option to the end of timestamps plus one (i.e., it points to the // octet beginning the space for next timestamp). The smallest // legal value is 5. The timestamp area is full when the pointer // is greater than the length. // // The Overflow (oflw) [4 bits] is the number of IP modules that // cannot register timestamps due to lack of space. // // The Flag (flg) [4 bits] values are // // 0 -- time stamps only, stored in consecutive 32-bit words, // // 1 -- each timestamp is preceded with internet address of the // registering entity, // // 3 -- the internet address fields are prespecified. An IP // module only registers its timestamp if it matches its own // address with the next specified internet address. // // Timestamps are defined in RFC 791 page 22 as milliseconds since midnight UTC. // // The Timestamp is a right-justified, 32-bit timestamp in // milliseconds since midnight UT. If the time is not available in // milliseconds or cannot be provided with respect to midnight UT // then any time may be inserted as a timestamp provided the high // order bit of the timestamp field is set to one to indicate the // use of a non-standard value. // IPv4OptTSFlags sefines the values expected in the Timestamp // option Flags field. type IPv4OptTSFlags uint8 // // Timestamp option specific related constants. const ( // IPv4OptionTimestampHdrLength is the length of the timestamp option header. IPv4OptionTimestampHdrLength = 4 // IPv4OptionTimestampSize is the size of an IP timestamp. IPv4OptionTimestampSize = 4 // IPv4OptionTimestampWithAddrSize is the size of an IP timestamp + Address. IPv4OptionTimestampWithAddrSize = IPv4AddressSize + IPv4OptionTimestampSize // IPv4OptionTimestampMaxSize is limited by space for options IPv4OptionTimestampMaxSize = IPv4MaximumOptionsSize // IPv4OptionTimestampOnlyFlag is a flag indicating that only timestamp // is present. IPv4OptionTimestampOnlyFlag IPv4OptTSFlags = 0 // IPv4OptionTimestampWithIPFlag is a flag indicating that both timestamps and // IP are present. IPv4OptionTimestampWithIPFlag IPv4OptTSFlags = 1 // IPv4OptionTimestampWithPredefinedIPFlag is a flag indicating that // predefined IP is present. IPv4OptionTimestampWithPredefinedIPFlag IPv4OptTSFlags = 3 ) // ipv4TimestampTime provides the current time as specified in RFC 791. func ipv4TimestampTime(clock tcpip.Clock) uint32 { const millisecondsPerDay = 24 * 3600 * 1000 const nanoPerMilli = 1000000 return uint32((clock.NowNanoseconds() / nanoPerMilli) % millisecondsPerDay) } // IP Timestamp option fields. const ( // IPv4OptTSPointerOffset is the offset of the Timestamp pointer field. IPv4OptTSPointerOffset = 2 // IPv4OptTSPointerOffset is the offset of the combined Flag and Overflow // fields, (each being 4 bits). IPv4OptTSOFLWAndFLGOffset = 3 // These constants define the sub byte fields of the Flag and OverFlow field. ipv4OptionTimestampOverflowshift = 4 ipv4OptionTimestampFlagsMask byte = 0x0f ) var _ IPv4Option = (*IPv4OptionTimestamp)(nil) // IPv4OptionTimestamp is a Timestamp option from RFC 791. type IPv4OptionTimestamp []byte // Type implements IPv4Option.Type(). func (ts *IPv4OptionTimestamp) Type() IPv4OptionType { return IPv4OptionTimestampType } // Size implements IPv4Option. func (ts *IPv4OptionTimestamp) Size() uint8 { return uint8(len(*ts)) } // Contents implements IPv4Option. func (ts *IPv4OptionTimestamp) Contents() []byte { return []byte(*ts) } // Pointer returns the pointer field in the IP Timestamp option. func (ts *IPv4OptionTimestamp) Pointer() uint8 { return (*ts)[IPv4OptTSPointerOffset] } // Flags returns the flags field in the IP Timestamp option. func (ts *IPv4OptionTimestamp) Flags() IPv4OptTSFlags { return IPv4OptTSFlags((*ts)[IPv4OptTSOFLWAndFLGOffset] & ipv4OptionTimestampFlagsMask) } // Overflow returns the Overflow field in the IP Timestamp option. func (ts *IPv4OptionTimestamp) Overflow() uint8 { return (*ts)[IPv4OptTSOFLWAndFLGOffset] >> ipv4OptionTimestampOverflowshift } // IncOverflow increments the Overflow field in the IP Timestamp option. It // returns the incremented value. If the return value is 0 then the field // overflowed. func (ts *IPv4OptionTimestamp) IncOverflow() uint8 { (*ts)[IPv4OptTSOFLWAndFLGOffset] += 1 << ipv4OptionTimestampOverflowshift return ts.Overflow() } // UpdateTimestamp updates the fields of the next free timestamp slot. func (ts *IPv4OptionTimestamp) UpdateTimestamp(addr tcpip.Address, clock tcpip.Clock) { slot := (*ts)[ts.Pointer()-1:] switch ts.Flags() { case IPv4OptionTimestampOnlyFlag: binary.BigEndian.PutUint32(slot, ipv4TimestampTime(clock)) (*ts)[IPv4OptTSPointerOffset] += IPv4OptionTimestampSize case IPv4OptionTimestampWithIPFlag: if n := copy(slot, addr); n != IPv4AddressSize { panic(fmt.Sprintf("copied %d bytes, expected %d bytes", n, IPv4AddressSize)) } binary.BigEndian.PutUint32(slot[IPv4AddressSize:], ipv4TimestampTime(clock)) (*ts)[IPv4OptTSPointerOffset] += IPv4OptionTimestampWithAddrSize case IPv4OptionTimestampWithPredefinedIPFlag: if tcpip.Address(slot[:IPv4AddressSize]) == addr { binary.BigEndian.PutUint32(slot[IPv4AddressSize:], ipv4TimestampTime(clock)) (*ts)[IPv4OptTSPointerOffset] += IPv4OptionTimestampWithAddrSize } } } // RecordRoute option specific related constants. // // from RFC 791 page 20: // Record Route // // +--------+--------+--------+---------//--------+ // |00000111| length | pointer| route data | // +--------+--------+--------+---------//--------+ // Type=7 // // The record route option provides a means to record the route of // an internet datagram. // // The option begins with the option type code. The second octet // is the option length which includes the option type code and the // length octet, the pointer octet, and length-3 octets of route // data. The third octet is the pointer into the route data // indicating the octet which begins the next area to store a route // address. The pointer is relative to this option, and the // smallest legal value for the pointer is 4. const ( // IPv4OptionRecordRouteHdrLength is the length of the Record Route option // header. IPv4OptionRecordRouteHdrLength = 3 // IPv4OptRRPointerOffset is the offset to the pointer field in an RR // option, which points to the next free slot in the list of addresses. IPv4OptRRPointerOffset = 2 ) var _ IPv4Option = (*IPv4OptionRecordRoute)(nil) // IPv4OptionRecordRoute is an IPv4 RecordRoute option defined by RFC 791. type IPv4OptionRecordRoute []byte // Pointer returns the pointer field in the IP RecordRoute option. func (rr *IPv4OptionRecordRoute) Pointer() uint8 { return (*rr)[IPv4OptRRPointerOffset] } // StoreAddress stores the given IPv4 address into the next free slot. func (rr *IPv4OptionRecordRoute) StoreAddress(addr tcpip.Address) { start := rr.Pointer() - 1 // A one based number. // start and room checked by caller. if n := copy((*rr)[start:], addr); n != IPv4AddressSize { panic(fmt.Sprintf("copied %d bytes, expected %d bytes", n, IPv4AddressSize)) } (*rr)[IPv4OptRRPointerOffset] += IPv4AddressSize } // Type implements IPv4Option. func (rr *IPv4OptionRecordRoute) Type() IPv4OptionType { return IPv4OptionRecordRouteType } // Size implements IPv4Option. func (rr *IPv4OptionRecordRoute) Size() uint8 { return uint8(len(*rr)) } // Contents implements IPv4Option. func (rr *IPv4OptionRecordRoute) Contents() []byte { return []byte(*rr) }