// Copyright 2018 The gVisor Authors. // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. // Package memmap defines semantics for memory mappings. package memmap import ( "fmt" "gvisor.dev/gvisor/pkg/context" "gvisor.dev/gvisor/pkg/hostarch" "gvisor.dev/gvisor/pkg/safemem" ) // Mappable represents a memory-mappable object, a mutable mapping from uint64 // offsets to (File, uint64 File offset) pairs. // // See mm/mm.go for Mappable's place in the lock order. // // All Mappable methods have the following preconditions: // * hostarch.AddrRanges and MappableRanges must be non-empty (Length() != 0). // * hostarch.Addrs and Mappable offsets must be page-aligned. type Mappable interface { // AddMapping notifies the Mappable of a mapping from addresses ar in ms to // offsets [offset, offset+ar.Length()) in this Mappable. // // The writable flag indicates whether the backing data for a Mappable can // be modified through the mapping. Effectively, this means a shared mapping // where Translate may be called with at.Write == true. This is a property // established at mapping creation and must remain constant throughout the // lifetime of the mapping. // // Preconditions: offset+ar.Length() does not overflow. AddMapping(ctx context.Context, ms MappingSpace, ar hostarch.AddrRange, offset uint64, writable bool) error // RemoveMapping notifies the Mappable of the removal of a mapping from // addresses ar in ms to offsets [offset, offset+ar.Length()) in this // Mappable. // // Preconditions: // * offset+ar.Length() does not overflow. // * The removed mapping must exist. writable must match the // corresponding call to AddMapping. RemoveMapping(ctx context.Context, ms MappingSpace, ar hostarch.AddrRange, offset uint64, writable bool) // CopyMapping notifies the Mappable of an attempt to copy a mapping in ms // from srcAR to dstAR. For most Mappables, this is equivalent to // AddMapping. Note that it is possible that srcAR.Length() != dstAR.Length(), // and also that srcAR.Length() == 0. // // CopyMapping is only called when a mapping is copied within a given // MappingSpace; it is analogous to Linux's vm_operations_struct::mremap. // // Preconditions: // * offset+srcAR.Length() and offset+dstAR.Length() do not overflow. // * The mapping at srcAR must exist. writable must match the // corresponding call to AddMapping. CopyMapping(ctx context.Context, ms MappingSpace, srcAR, dstAR hostarch.AddrRange, offset uint64, writable bool) error // Translate returns the Mappable's current mappings for at least the range // of offsets specified by required, and at most the range of offsets // specified by optional. at is the set of access types that may be // performed using the returned Translations. If not all required offsets // are translated, it returns a non-nil error explaining why. // // Translations are valid until invalidated by a callback to // MappingSpace.Invalidate or until the caller removes its mapping of the // translated range. Mappable implementations must ensure that at least one // reference is held on all pages in a File that may be the result // of a valid Translation. // // Preconditions: // * required.Length() > 0. // * optional.IsSupersetOf(required). // * required and optional must be page-aligned. // * The caller must have established a mapping for all of the queried // offsets via a previous call to AddMapping. // * The caller is responsible for ensuring that calls to Translate // synchronize with invalidation. // // Postconditions: See CheckTranslateResult. Translate(ctx context.Context, required, optional MappableRange, at hostarch.AccessType) ([]Translation, error) // InvalidateUnsavable requests that the Mappable invalidate Translations // that cannot be preserved across save/restore. // // Invariant: InvalidateUnsavable never races with concurrent calls to any // other Mappable methods. InvalidateUnsavable(ctx context.Context) error } // Translations are returned by Mappable.Translate. type Translation struct { // Source is the translated range in the Mappable. Source MappableRange // File is the mapped file. File File // Offset is the offset into File at which this Translation begins. Offset uint64 // Perms is the set of permissions for which platform.AddressSpace.MapFile // and platform.AddressSpace.MapInternal on this Translation is permitted. Perms hostarch.AccessType } // FileRange returns the FileRange represented by t. func (t Translation) FileRange() FileRange { return FileRange{t.Offset, t.Offset + t.Source.Length()} } // CheckTranslateResult returns an error if (ts, terr) does not satisfy all // postconditions for Mappable.Translate(required, optional, at). // // Preconditions: Same as Mappable.Translate. func CheckTranslateResult(required, optional MappableRange, at hostarch.AccessType, ts []Translation, terr error) error { // Verify that the inputs to Mappable.Translate were valid. if !required.WellFormed() || required.Length() == 0 { panic(fmt.Sprintf("invalid required range: %v", required)) } if !hostarch.Addr(required.Start).IsPageAligned() || !hostarch.Addr(required.End).IsPageAligned() { panic(fmt.Sprintf("unaligned required range: %v", required)) } if !optional.IsSupersetOf(required) { panic(fmt.Sprintf("optional range %v is not a superset of required range %v", optional, required)) } if !hostarch.Addr(optional.Start).IsPageAligned() || !hostarch.Addr(optional.End).IsPageAligned() { panic(fmt.Sprintf("unaligned optional range: %v", optional)) } // The first Translation must include required.Start. if len(ts) != 0 && !ts[0].Source.Contains(required.Start) { return fmt.Errorf("first Translation %+v does not cover start of required range %v", ts[0], required) } for i, t := range ts { if !t.Source.WellFormed() || t.Source.Length() == 0 { return fmt.Errorf("Translation %+v has invalid Source", t) } if !hostarch.Addr(t.Source.Start).IsPageAligned() || !hostarch.Addr(t.Source.End).IsPageAligned() { return fmt.Errorf("Translation %+v has unaligned Source", t) } if t.File == nil { return fmt.Errorf("Translation %+v has nil File", t) } if !hostarch.Addr(t.Offset).IsPageAligned() { return fmt.Errorf("Translation %+v has unaligned Offset", t) } // Translations must be contiguous and in increasing order of // Translation.Source. if i > 0 && ts[i-1].Source.End != t.Source.Start { return fmt.Errorf("Translation %+v and Translation %+v are not contiguous", ts[i-1], t) } // At least part of each Translation must be required. if t.Source.Intersect(required).Length() == 0 { return fmt.Errorf("Translation %+v lies entirely outside required range %v", t, required) } // Translations must be constrained to the optional range. if !optional.IsSupersetOf(t.Source) { return fmt.Errorf("Translation %+v lies outside optional range %v", t, optional) } // Each Translation must permit a superset of requested accesses. if !t.Perms.SupersetOf(at) { return fmt.Errorf("Translation %+v does not permit all requested access types %v", t, at) } } // If the set of Translations does not cover the entire required range, // Translate must return a non-nil error explaining why. if terr == nil { if len(ts) == 0 { return fmt.Errorf("no Translations and no error") } if t := ts[len(ts)-1]; !t.Source.Contains(required.End - 1) { return fmt.Errorf("last Translation %+v does not reach end of required range %v, but Translate returned no error", t, required) } } return nil } // BusError may be returned by implementations of Mappable.Translate for errors // that should result in SIGBUS delivery if they cause application page fault // handling to fail. type BusError struct { // Err is the original error. Err error } // Error implements error.Error. func (b *BusError) Error() string { return fmt.Sprintf("BusError: %v", b.Err.Error()) } // MappableRange represents a range of uint64 offsets into a Mappable. // // type MappableRange // String implements fmt.Stringer.String. func (mr MappableRange) String() string { return fmt.Sprintf("[%#x, %#x)", mr.Start, mr.End) } // MappingSpace represents a mutable mapping from hostarch.Addrs to (Mappable, // uint64 offset) pairs. type MappingSpace interface { // Invalidate is called to notify the MappingSpace that values returned by // previous calls to Mappable.Translate for offsets mapped by addresses in // ar are no longer valid. // // Invalidate must not take any locks preceding mm.MemoryManager.activeMu // in the lock order. // // Preconditions: // * ar.Length() != 0. // * ar must be page-aligned. Invalidate(ar hostarch.AddrRange, opts InvalidateOpts) } // InvalidateOpts holds options to MappingSpace.Invalidate. type InvalidateOpts struct { // InvalidatePrivate is true if private pages in the invalidated region // should also be discarded, causing their data to be lost. InvalidatePrivate bool } // MappingIdentity controls the lifetime of a Mappable, and provides // information about the Mappable for /proc/[pid]/maps. It is distinct from // Mappable because all Mappables that are coherent must compare equal to // support the implementation of shared futexes, but different // MappingIdentities may represent the same Mappable, in the same way that // multiple fs.Files may represent the same fs.Inode. (This similarity is not // coincidental; fs.File implements MappingIdentity, and some // fs.InodeOperations implement Mappable.) type MappingIdentity interface { // IncRef increments the MappingIdentity's reference count. IncRef() // DecRef decrements the MappingIdentity's reference count. DecRef(ctx context.Context) // MappedName returns the application-visible name shown in // /proc/[pid]/maps. MappedName(ctx context.Context) string // DeviceID returns the device number shown in /proc/[pid]/maps. DeviceID() uint64 // InodeID returns the inode number shown in /proc/[pid]/maps. InodeID() uint64 // Msync has the same semantics as fs.FileOperations.Fsync(ctx, // int64(mr.Start), int64(mr.End-1), fs.SyncData). // (fs.FileOperations.Fsync() takes an inclusive end, but mr.End is // exclusive, hence mr.End-1.) It is defined rather than Fsync so that // implementors don't need to depend on the fs package for fs.SyncType. Msync(ctx context.Context, mr MappableRange) error } // MLockMode specifies the memory locking behavior of a memory mapping. type MLockMode int // Note that the ordering of MLockModes is significant; see // mm.MemoryManager.defMLockMode. const ( // MLockNone specifies that a mapping has no memory locking behavior. // // This must be the zero value for MLockMode. MLockNone MLockMode = iota // MLockEager specifies that a mapping is memory-locked, as by mlock() or // similar. Pages in the mapping should be made, and kept, resident in // physical memory as soon as possible. // // As of this writing, MLockEager does not cause memory-locking to be // requested from the host; it only affects the sentry's memory management // behavior. // // MLockEager is analogous to Linux's VM_LOCKED. MLockEager // MLockLazy specifies that a mapping is memory-locked, as by mlock() or // similar. Pages in the mapping should be kept resident in physical memory // once they have been made resident due to e.g. a page fault. // // As of this writing, MLockLazy does not cause memory-locking to be // requested from the host; in fact, it has virtually no effect, except for // interactions between mlocked pages and other syscalls. // // MLockLazy is analogous to Linux's VM_LOCKED | VM_LOCKONFAULT. MLockLazy ) // MMapOpts specifies a request to create a memory mapping. type MMapOpts struct { // Length is the length of the mapping. Length uint64 // MappingIdentity controls the lifetime of Mappable, and provides // properties of the mapping shown in /proc/[pid]/maps. If MMapOpts is used // to successfully create a memory mapping, a reference is taken on // MappingIdentity. MappingIdentity MappingIdentity // Mappable is the Mappable to be mapped. If Mappable is nil, the mapping // is anonymous. If Mappable is not nil, it must remain valid as long as a // reference is held on MappingIdentity. Mappable Mappable // Offset is the offset into Mappable to map. If Mappable is nil, Offset is // ignored. Offset uint64 // Addr is the suggested address for the mapping. Addr hostarch.Addr // Fixed specifies whether this is a fixed mapping (it must be located at // Addr). Fixed bool // Unmap specifies whether existing mappings in the range being mapped may // be replaced. If Unmap is true, Fixed must be true. Unmap bool // If Map32Bit is true, all addresses in the created mapping must fit in a // 32-bit integer. (Note that the "end address" of the mapping, i.e. the // address of the first byte *after* the mapping, need not fit in a 32-bit // integer.) Map32Bit is ignored if Fixed is true. Map32Bit bool // Perms is the set of permissions to the applied to this mapping. Perms hostarch.AccessType // MaxPerms limits the set of permissions that may ever apply to this // mapping. If Mappable is not nil, all memmap.Translations returned by // Mappable.Translate must support all accesses in MaxPerms. // // Preconditions: MaxAccessType should be an effective AccessType, as // access cannot be limited beyond effective AccessTypes. MaxPerms hostarch.AccessType // Private is true if writes to the mapping should be propagated to a copy // that is exclusive to the MemoryManager. Private bool // GrowsDown is true if the mapping should be automatically expanded // downward on guard page faults. GrowsDown bool // Precommit is true if the platform should eagerly commit resources to the // mapping (see platform.AddressSpace.MapFile). Precommit bool // MLockMode specifies the memory locking behavior of the mapping. MLockMode MLockMode // Hint is the name used for the mapping in /proc/[pid]/maps. If Hint is // empty, MappingIdentity.MappedName() will be used instead. // // TODO(jamieliu): Replace entirely with MappingIdentity? Hint string // Force means to skip validation checks of Addr and Length. It can be // used to create special mappings below mm.layout.MinAddr and // mm.layout.MaxAddr. It has to be used with caution. // // If Force is true, Unmap and Fixed must be true. Force bool // SentryOwnedContent indicates the sentry exclusively controls the // underlying memory backing the mapping thus the memory content is // guaranteed not to be modified outside the sentry's purview. SentryOwnedContent bool } // File represents a host file that may be mapped into an platform.AddressSpace. type File interface { // All pages in a File are reference-counted. // IncRef increments the reference count on all pages in fr. // // Preconditions: // * fr.Start and fr.End must be page-aligned. // * fr.Length() > 0. // * At least one reference must be held on all pages in fr. (The File // interface does not provide a way to acquire an initial reference; // implementors may define mechanisms for doing so.) IncRef(fr FileRange) // DecRef decrements the reference count on all pages in fr. // // Preconditions: // * fr.Start and fr.End must be page-aligned. // * fr.Length() > 0. // * At least one reference must be held on all pages in fr. DecRef(fr FileRange) // MapInternal returns a mapping of the given file offsets in the invoking // process' address space for reading and writing. // // Note that fr.Start and fr.End need not be page-aligned. // // Preconditions: // * fr.Length() > 0. // * At least one reference must be held on all pages in fr. // // Postconditions: The returned mapping is valid as long as at least one // reference is held on the mapped pages. MapInternal(fr FileRange, at hostarch.AccessType) (safemem.BlockSeq, error) // FD returns the file descriptor represented by the File. // // The only permitted operation on the returned file descriptor is to map // pages from it consistent with the requirements of AddressSpace.MapFile. FD() int } // FileRange represents a range of uint64 offsets into a File. // // type FileRange // String implements fmt.Stringer.String. func (fr FileRange) String() string { return fmt.Sprintf("[%#x, %#x)", fr.Start, fr.End) }