// Copyright 2018 Google LLC // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. package loader import ( "debug/elf" "fmt" "io" "gvisor.googlesource.com/gvisor/pkg/abi" "gvisor.googlesource.com/gvisor/pkg/log" "gvisor.googlesource.com/gvisor/pkg/sentry/arch" "gvisor.googlesource.com/gvisor/pkg/sentry/context" "gvisor.googlesource.com/gvisor/pkg/sentry/fs" "gvisor.googlesource.com/gvisor/pkg/sentry/fs/anon" "gvisor.googlesource.com/gvisor/pkg/sentry/fs/fsutil" "gvisor.googlesource.com/gvisor/pkg/sentry/memmap" "gvisor.googlesource.com/gvisor/pkg/sentry/mm" "gvisor.googlesource.com/gvisor/pkg/sentry/pgalloc" "gvisor.googlesource.com/gvisor/pkg/sentry/safemem" "gvisor.googlesource.com/gvisor/pkg/sentry/uniqueid" "gvisor.googlesource.com/gvisor/pkg/sentry/usage" "gvisor.googlesource.com/gvisor/pkg/sentry/usermem" "gvisor.googlesource.com/gvisor/pkg/syserror" "gvisor.googlesource.com/gvisor/pkg/waiter" ) type fileContext struct { context.Context } func (f *fileContext) Value(key interface{}) interface{} { switch key { case uniqueid.CtxGlobalUniqueID: return uint64(0) default: return f.Context.Value(key) } } // byteReader implements fs.FileOperations for reading from a []byte source. type byteReader struct { waiter.AlwaysReady `state:"nosave"` fsutil.FileNoFsync `state:"nosave"` fsutil.FileNoIoctl `state:"nosave"` fsutil.FileNoMMap `state:"nosave"` fsutil.FileNoopFlush `state:"nosave"` fsutil.FileNoopRelease `state:"nosave"` fsutil.FileNotDirReaddir `state:"nosave"` fsutil.FilePipeSeek `state:"nosave"` fsutil.FileUseInodeUnstableAttr `state:"nosave"` data []byte } var _ fs.FileOperations = (*byteReader)(nil) // newByteReaderFile creates a fake file to read data from. func newByteReaderFile(data []byte) *fs.File { // Create a fake inode. inode := fs.NewInode( &fsutil.SimpleFileInode{}, fs.NewPseudoMountSource(), fs.StableAttr{ Type: fs.Anonymous, DeviceID: anon.PseudoDevice.DeviceID(), InodeID: anon.PseudoDevice.NextIno(), BlockSize: usermem.PageSize, }) // Use the fake inode to create a fake dirent. dirent := fs.NewTransientDirent(inode) defer dirent.DecRef() // Use the fake dirent to make a fake file. flags := fs.FileFlags{Read: true, Pread: true} return fs.NewFile(&fileContext{Context: context.Background()}, dirent, flags, &byteReader{ data: data, }) } func (b *byteReader) Read(ctx context.Context, file *fs.File, dst usermem.IOSequence, offset int64) (int64, error) { if offset < 0 { return 0, syserror.EINVAL } if offset >= int64(len(b.data)) { return 0, io.EOF } n, err := dst.CopyOut(ctx, b.data[offset:]) return int64(n), err } func (b *byteReader) Write(ctx context.Context, file *fs.File, src usermem.IOSequence, offset int64) (int64, error) { panic("Write not supported") } // validateVDSO checks that the VDSO can be loaded by loadVDSO. // // VDSOs are special (see below). Since we are going to map the VDSO directly // rather than using a normal loading process, we require that the PT_LOAD // segments have the same layout in the ELF as they expect to have in memory. // // Namely, this means that we must verify: // * PT_LOAD file offsets are equivalent to the memory offset from the first // segment. // * No extra zeroed space (memsz) is required. // * PT_LOAD segments are in order. // * No two PT_LOAD segments occupy parts of the same page. // * PT_LOAD segments don't extend beyond the end of the file. // // ctx may be nil if f does not need it. func validateVDSO(ctx context.Context, f *fs.File, size uint64) (elfInfo, error) { info, err := parseHeader(ctx, f) if err != nil { log.Infof("Unable to parse VDSO header: %v", err) return elfInfo{}, err } var first *elf.ProgHeader var prev *elf.ProgHeader var prevEnd usermem.Addr for i, phdr := range info.phdrs { if phdr.Type != elf.PT_LOAD { continue } if first == nil { first = &info.phdrs[i] if phdr.Off != 0 { log.Warningf("First PT_LOAD segment has non-zero file offset") return elfInfo{}, syserror.ENOEXEC } } memoryOffset := phdr.Vaddr - first.Vaddr if memoryOffset != phdr.Off { log.Warningf("PT_LOAD segment memory offset %#x != file offset %#x", memoryOffset, phdr.Off) return elfInfo{}, syserror.ENOEXEC } // memsz larger than filesz means that extra zeroed space should be // provided at the end of the segment. Since we are mapping the ELF // directly, we don't want to just overwrite part of the ELF with // zeroes. if phdr.Memsz != phdr.Filesz { log.Warningf("PT_LOAD segment memsz %#x != filesz %#x", phdr.Memsz, phdr.Filesz) return elfInfo{}, syserror.ENOEXEC } start := usermem.Addr(memoryOffset) end, ok := start.AddLength(phdr.Memsz) if !ok { log.Warningf("PT_LOAD segment size overflows: %#x + %#x", start, end) return elfInfo{}, syserror.ENOEXEC } if uint64(end) > size { log.Warningf("PT_LOAD segment end %#x extends beyond end of file %#x", end, size) return elfInfo{}, syserror.ENOEXEC } if prev != nil { if start < prevEnd { log.Warningf("PT_LOAD segments out of order") return elfInfo{}, syserror.ENOEXEC } // We mprotect entire pages, so each segment must be in // its own page. prevEndPage := prevEnd.RoundDown() startPage := start.RoundDown() if prevEndPage >= startPage { log.Warningf("PT_LOAD segments share a page: %#x", prevEndPage) return elfInfo{}, syserror.ENOEXEC } } prev = &info.phdrs[i] prevEnd = end } return info, nil } // VDSO describes a VDSO. // // NOTE: to support multiple architectures or operating systems, this // would need to contain a VDSO for each. // // +stateify savable type VDSO struct { // ParamPage is the VDSO parameter page. This page should be updated to // inform the VDSO for timekeeping data. ParamPage *mm.SpecialMappable // vdso is the VDSO ELF itself. vdso *mm.SpecialMappable // os is the operating system targeted by the VDSO. os abi.OS // arch is the architecture targeted by the VDSO. arch arch.Arch // phdrs are the VDSO ELF phdrs. phdrs []elf.ProgHeader `state:".([]elfProgHeader)"` } // PrepareVDSO validates the system VDSO and returns a VDSO, containing the // param page for updating by the kernel. func PrepareVDSO(mfp pgalloc.MemoryFileProvider) (*VDSO, error) { vdsoFile := newByteReaderFile(vdsoBin) // First make sure the VDSO is valid. vdsoFile does not use ctx, so a // nil context can be passed. info, err := validateVDSO(nil, vdsoFile, uint64(len(vdsoBin))) vdsoFile.DecRef() if err != nil { return nil, err } // Then copy it into a VDSO mapping. size, ok := usermem.Addr(len(vdsoBin)).RoundUp() if !ok { return nil, fmt.Errorf("VDSO size overflows? %#x", len(vdsoBin)) } mf := mfp.MemoryFile() vdso, err := mf.Allocate(uint64(size), usage.System) if err != nil { return nil, fmt.Errorf("unable to allocate VDSO memory: %v", err) } ims, err := mf.MapInternal(vdso, usermem.ReadWrite) if err != nil { mf.DecRef(vdso) return nil, fmt.Errorf("unable to map VDSO memory: %v", err) } _, err = safemem.CopySeq(ims, safemem.BlockSeqOf(safemem.BlockFromSafeSlice(vdsoBin))) if err != nil { mf.DecRef(vdso) return nil, fmt.Errorf("unable to copy VDSO into memory: %v", err) } // Finally, allocate a param page for this VDSO. paramPage, err := mf.Allocate(usermem.PageSize, usage.System) if err != nil { mf.DecRef(vdso) return nil, fmt.Errorf("unable to allocate VDSO param page: %v", err) } return &VDSO{ ParamPage: mm.NewSpecialMappable("[vvar]", mfp, paramPage), // TODO: Don't advertise the VDSO, as // some applications may not be able to handle multiple [vdso] // hints. vdso: mm.NewSpecialMappable("", mfp, vdso), phdrs: info.phdrs, }, nil } // loadVDSO loads the VDSO into m. // // VDSOs are special. // // VDSOs are fully position independent. However, instead of loading a VDSO // like a normal ELF binary, mapping only the PT_LOAD segments, the Linux // kernel simply directly maps the entire file into process memory, with very // little real ELF parsing. // // NOTE: This means that userspace can, and unfortunately does, // depend on parts of the ELF that would normally not be mapped. To maintain // compatibility with such binaries, we load the VDSO much like Linux. // // loadVDSO takes a reference on the VDSO and parameter page FrameRegions. func loadVDSO(ctx context.Context, m *mm.MemoryManager, v *VDSO, bin loadedELF) (usermem.Addr, error) { if v.os != bin.os { ctx.Warningf("Binary ELF OS %v and VDSO ELF OS %v differ", bin.os, v.os) return 0, syserror.ENOEXEC } if v.arch != bin.arch { ctx.Warningf("Binary ELF arch %v and VDSO ELF arch %v differ", bin.arch, v.arch) return 0, syserror.ENOEXEC } // Reserve address space for the VDSO and its parameter page, which is // mapped just before the VDSO. mapSize := v.vdso.Length() + v.ParamPage.Length() addr, err := m.MMap(ctx, memmap.MMapOpts{ Length: mapSize, Private: true, }) if err != nil { ctx.Infof("Unable to reserve VDSO address space: %v", err) return 0, err } // Now map the param page. _, err = m.MMap(ctx, memmap.MMapOpts{ Length: v.ParamPage.Length(), MappingIdentity: v.ParamPage, Mappable: v.ParamPage, Addr: addr, Fixed: true, Unmap: true, Private: true, Perms: usermem.Read, MaxPerms: usermem.Read, }) if err != nil { ctx.Infof("Unable to map VDSO param page: %v", err) return 0, err } // Now map the VDSO itself. vdsoAddr, ok := addr.AddLength(v.ParamPage.Length()) if !ok { panic(fmt.Sprintf("Part of mapped range overflows? %#x + %#x", addr, v.ParamPage.Length())) } _, err = m.MMap(ctx, memmap.MMapOpts{ Length: v.vdso.Length(), MappingIdentity: v.vdso, Mappable: v.vdso, Addr: vdsoAddr, Fixed: true, Unmap: true, Private: true, Perms: usermem.Read, MaxPerms: usermem.AnyAccess, }) if err != nil { ctx.Infof("Unable to map VDSO: %v", err) return 0, err } vdsoEnd, ok := vdsoAddr.AddLength(v.vdso.Length()) if !ok { panic(fmt.Sprintf("VDSO mapping overflows? %#x + %#x", vdsoAddr, v.vdso.Length())) } // Set additional protections for the individual segments. var first *elf.ProgHeader for i, phdr := range v.phdrs { if phdr.Type != elf.PT_LOAD { continue } if first == nil { first = &v.phdrs[i] } memoryOffset := phdr.Vaddr - first.Vaddr segAddr, ok := vdsoAddr.AddLength(memoryOffset) if !ok { ctx.Warningf("PT_LOAD segment address overflows: %#x + %#x", segAddr, memoryOffset) return 0, syserror.ENOEXEC } segPage := segAddr.RoundDown() segSize := usermem.Addr(phdr.Memsz) segSize, ok = segSize.AddLength(segAddr.PageOffset()) if !ok { ctx.Warningf("PT_LOAD segment memsize %#x + offset %#x overflows", phdr.Memsz, segAddr.PageOffset()) return 0, syserror.ENOEXEC } segSize, ok = segSize.RoundUp() if !ok { ctx.Warningf("PT_LOAD segment size overflows: %#x", phdr.Memsz+segAddr.PageOffset()) return 0, syserror.ENOEXEC } segEnd, ok := segPage.AddLength(uint64(segSize)) if !ok { ctx.Warningf("PT_LOAD segment range overflows: %#x + %#x", segAddr, segSize) return 0, syserror.ENOEXEC } if segEnd > vdsoEnd { ctx.Warningf("PT_LOAD segment ends beyond VDSO: %#x > %#x", segEnd, vdsoEnd) return 0, syserror.ENOEXEC } perms := progFlagsAsPerms(phdr.Flags) if perms != usermem.Read { if err := m.MProtect(segPage, uint64(segSize), perms, false); err != nil { ctx.Warningf("Unable to set PT_LOAD segment protections %+v at [%#x, %#x): %v", perms, segAddr, segEnd, err) return 0, syserror.ENOEXEC } } } return vdsoAddr, nil }