summaryrefslogtreecommitdiffhomepage
path: root/test
AgeCommit message (Collapse)Author
2020-09-09Link to PHP bug for disabled disk space tests.Jamie Liu
PiperOrigin-RevId: 328410399
2020-09-09remove iptables sockopt special casesKevin Krakauer
iptables sockopts were kludged into an unnecessary check, this properly relegates them to the {get,set}SockOptIP functions. PiperOrigin-RevId: 328395135
2020-09-09Add nogo support to go_binary and go_test targets.Adin Scannell
Updates #3374 PiperOrigin-RevId: 328378700
2020-09-09Support SO_LINGER socket option.Nayana Bidari
When SO_LINGER option is enabled, the close will not return until all the queued messages are sent and acknowledged for the socket or linger timeout is reached. If the option is not set, close will return immediately. This option is mainly supported for connection oriented protocols such as TCP. PiperOrigin-RevId: 328350576
2020-09-09Disable PHP disk space tests.Jamie Liu
These tests print disk_free_space()/disk_total_space() and expect the printed result to be an integer (despite the fact that both the documented and returned type is float). After cl/297213789, free/total disk space on tmpfs is sufficiently large that PHP prints the result in scientific notation instead: ========DIFF======== 012+ float(9.2233720368548E+18) 013+ float(9.2233720368548E+18) 012- float(%d) 013- float(%d) ========DONE======== FAIL disk_total_space() and disk_free_space() tests [ext/standard/tests/file/disk.phpt] PiperOrigin-RevId: 328349906
2020-09-09Fix TCP_LINGER2 behavior to match linux.Bhasker Hariharan
We still deviate a bit from linux in how long we will actually wait in FIN-WAIT-2. Linux seems to cap it with TIME_WAIT_LEN and it's not completely obvious as to why it's done that way. For now I think we can ignore that and fix it if it really is an issue. PiperOrigin-RevId: 328324922
2020-09-09Consider loopback bound to all addresses in subnetGhanan Gowripalan
When a loopback interface is configurd with an address and associated subnet, the loopback should treat all addresses in that subnet as an address it owns. This is mimicking linux behaviour as seen below: ``` $ ip addr show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever $ ping 192.0.2.1 PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data. ^C --- 192.0.2.1 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1018ms $ ping 192.0.2.2 PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data. ^C --- 192.0.2.2 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2039ms $ sudo ip addr add 192.0.2.1/24 dev lo $ ip addr show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet 192.0.2.1/24 scope global lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever $ ping 192.0.2.1 PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data. 64 bytes from 192.0.2.1: icmp_seq=1 ttl=64 time=0.131 ms 64 bytes from 192.0.2.1: icmp_seq=2 ttl=64 time=0.046 ms 64 bytes from 192.0.2.1: icmp_seq=3 ttl=64 time=0.048 ms ^C --- 192.0.2.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2042ms rtt min/avg/max/mdev = 0.046/0.075/0.131/0.039 ms $ ping 192.0.2.2 PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data. 64 bytes from 192.0.2.2: icmp_seq=1 ttl=64 time=0.131 ms 64 bytes from 192.0.2.2: icmp_seq=2 ttl=64 time=0.069 ms 64 bytes from 192.0.2.2: icmp_seq=3 ttl=64 time=0.049 ms 64 bytes from 192.0.2.2: icmp_seq=4 ttl=64 time=0.035 ms ^C --- 192.0.2.2 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3049ms rtt min/avg/max/mdev = 0.035/0.071/0.131/0.036 ms ``` Test: integration_test.TestLoopbackAcceptAllInSubnet PiperOrigin-RevId: 328188546
2020-09-09Internal change.gVisor bot
PiperOrigin-RevId: 328157101
2020-09-09Add syscall tests for SO_REUSEADDR.Mithun Iyer
Add tests for socket re-bind/listen of client and server sockets with the older connection still in TIME_WAIT state and with SO_REUSEADDR enabled. PiperOrigin-RevId: 327924702
2020-09-09Move udp port exhaustion tests to a 'nogotsan' one.Ting-Yu Wang
It frequently times out under GoTSAN. PiperOrigin-RevId: 327894343
2020-09-09Fix Inotify tests in open source.Zach Koopmans
The order of unlink events (dir event/file event) is undefined, so make tests accept both orderings. PiperOrigin-RevId: 327873316
2020-09-09Skip ElfInterpreterStaticTest for 5.X kernels.Zach Koopmans
gVisor emulates 4.6 kernel versions, and test doesn't work on 5.0 versions (observed on our Ubuntu18.04 image). Skip it. PiperOrigin-RevId: 327845037
2020-09-09Skip socket stress tests on KVM platform.Nicolas Lacasse
They time out. PiperOrigin-RevId: 327830892
2020-09-09Enable strace+debug in syscall testsFabricio Voznika
This is done to ease troubleshooting when tests fail. runsc logs are not stored when tests passe, so this will only affect failing tests and should not increase log storage too badly. PiperOrigin-RevId: 327717551
2020-09-09Skip listening TCP ports when trying to bind a free port.Bhasker Hariharan
PiperOrigin-RevId: 327686558
2020-09-09Fix return for rseq_test.Zach Koopmans
Accept 128 + SIGNAL as well as SIGNAL as valid returns for fork/exec tests. Also, make changes so that test compiles in opensource. Test had compile errors on latest Ubuntu 16.04 image with updated bazel to 3.4.0 (as well as base 2.0) used for Kokoro tests. PiperOrigin-RevId: 327510310
2020-09-09ip6tables: test initial stateKevin Krakauer
Tests that we have the correct initial (empty) state for ip6tables. #3549 PiperOrigin-RevId: 327477657
2020-08-19Skip ECN test for native/linux tests.Zach Koopmans
Skip check for ECN bits in native/linux tests. General advice for the ECN field is to leave the setting to the kernel, so behavior of the test is undefined for different kernels. http://www.masterraghu.com/subjects/np/introduction/unix_network_programming_v1.3/ch07lev1sec6.html PiperOrigin-RevId: 327451414
2020-08-19Return appropriate errors when file locking is unsuccessful.Dean Deng
test_eintr now passes in the Python runtime tests. Updates #3515. PiperOrigin-RevId: 327441081
2020-08-19Fix return value in shm_test for opensourceZach Koopmans
Some machines return 128 + signal for failures. Accept that as a valid result. PiperOrigin-RevId: 327326113
2020-08-19Fix timeval for Socket testZach Koopmans
tv_usec field should be a multiple of 4K to pass in open source on linux/native, so make it one. PiperOrigin-RevId: 327288405
2020-08-19Fix readahead test for opensource.Zach Koopmans
Skip InvalidOffset and InvalidLength for Linux as the test is invalid for later Kernel versions. Add UnsupportedFile test as this check is in all kernel versions. PiperOrigin-RevId: 327248035
2020-08-19Fix return value for MMap Tests in OpenSourceZach Koopmans
Some systems return 128 + errno instead of just errno, which is the case here. PiperOrigin-RevId: 327247836
2020-08-19Fix AllSocketPairTest for open source.Zach Koopmans
Setting timeouts for sockets on GCP images (debian) for usecs only respects multiples of 4K. Set the test with a multiple of 4K with a comment. PiperOrigin-RevId: 327093848
2020-08-19[vfs] Do O_DIRECTORY check after resolving symlinks.Ayush Ranjan
Fixes python runtime test test_glob. Updates #3515 We were checking is the to-be-opened dentry is a dir or not before resolving symlinks. We should check that after resolving symlinks. This was preventing us from opening a symlink which pointed to a directory with O_DIRECTORY. Also added this check in tmpfs and removed a duplicate check. PiperOrigin-RevId: 327085895
2020-08-14Update README for packetimpactNayana Bidari
PiperOrigin-RevId: 326733912
2020-08-14Merge pull request #3375 from kevinGC:ipt-test-early-returngVisor bot
PiperOrigin-RevId: 326693922
2020-08-14Skip UDPMulticast Tests when net interfaces aren't found.Zach Koopmans
PiperOrigin-RevId: 326686761
2020-08-14Give the ICMP Code its own typeJulian Elischer
This is a preparatory commit for a larger commit working on ICMP generation in error cases. This is removal of technical debt and cleanup in the gvisor code as part of gvisor issue 2211. Updates #2211. PiperOrigin-RevId: 326615389
2020-08-13[vfs2][gofer] Fix file creation flags sent to gofer.Ayush Ranjan
Fixes php runtime test ext/standard/tests/file/readfile_basic.phpt Fixes #3516 fsgofers only want the access mode in the OpenFlags passed to Create(). If more flags are supplied (like O_APPEND in this case), read/write from that fd will fail with EBADF. See runsc/fsgofer/fsgofer.go:WriteAt() VFS2 was providing more than just access modes. So filtering the flags using p9.OpenFlagsModeMask == linux.O_ACCMODE fixes the issue. Gofer in VFS1 also only extracts the access mode flags while making the create RPC. See pkg/sentry/fs/gofer/path.go:Create() Even in VFS2, when we open a handle, we extract out only the access mode flags + O_TRUNC. See third_party/gvisor/pkg/sentry/fsimpl/gofer/handle.go:openHandle() Added a test for this. PiperOrigin-RevId: 326574829
2020-08-13Disable vfs2 for socket_stress_test.Ayush Ranjan
PiperOrigin-RevId: 326553620
2020-08-13Ensure TCP TIME-WAIT is not terminated prematurely.Bhasker Hariharan
Netstack's TIME-WAIT state for a TCP socket could be terminated prematurely if the socket entered TIME-WAIT using shutdown(..., SHUT_RDWR) and then was closed using close(). This fixes that bug and updates the tests to verify that Netstack correctly honors TIME-WAIT under such conditions. Fixes #3106 PiperOrigin-RevId: 326456443
2020-08-12[vfs2][gofer] Return appropriate errors when opening and creating files.Ayush Ranjan
Fixes php test ext/standard/tests/file/touch_variation5.phpt on vfs2. Updates #3516 Also spotted a bug with O_EXCL, where we did not return EEXIST when we tried to open the root of the filesystem with O_EXCL | O_CREAT. Added some more tests for open() corner cases. PiperOrigin-RevId: 326346863
2020-08-12Merge pull request #3250 from craig08:fuse-getattrgVisor bot
PiperOrigin-RevId: 326313858
2020-08-12Limit the scope when deleting test log directory on successFabricio Voznika
The code was deleting logs for all tests when a single test passed. Change it to delete only the logs relevant to the test at hand. Also fixed the benchmark lookup code, which was always generating a single empty benchmark entry if there were not benchmarks. PiperOrigin-RevId: 326311477
2020-08-11Mark integration tests as passing in VFS2 except CheckpointRestore.Zach Koopmans
Mark all tests passing for VFS2 in: image_test integration_test There's no way to do negative look ahead/behind in golang test regex, so check if the tests uses VFS2 and skip CheckPointRestore if it does. PiperOrigin-RevId: 326050915
2020-08-10Implement FUSE_GETATTRCraig Chi
FUSE_GETATTR is called when a stat(2), fstat(2), or lstat(2) is issued from VFS2 layer to a FUSE filesystem. Fixes #3175
2020-08-10Speed up iptables testsKevin Krakauer
//test/iptables:iptables_test runs 30 seconds faster on my machine. * Using contexts instead of many smaller timeouts makes the tests less likely to flake and removes unnecessary complexity. * We also use context to properly shut down concurrent goroutines and the test container. * Container logs are always logged.
2020-08-10Populate IPPacketInfo with destination addressGhanan Gowripalan
IPPacketInfo.DestinationAddr should hold the destination of the IP packet, not the source. This change fixes that bug. PiperOrigin-RevId: 325910766
2020-08-10Enable VFS2 by default for all syscall tests.Ayush Ranjan
Fixes #2923 PiperOrigin-RevId: 325904734
2020-08-10Add benchmarks to continuous build.Zach Koopmans
PiperOrigin-RevId: 325892974
2020-08-07Remove old benchmark tools.Zach Koopmans
Remove the old benchmark-tools directory, including imports in the WORKSPACE file and associated bazel rules. The new Golang benchmark-tools can be found at //test/benchmarks and it is functionally equivalent, excepting syscall_test which can be found in //test/perf/linux. PiperOrigin-RevId: 325529075
2020-08-07Port Ruby benchmark.Zach Koopmans
PiperOrigin-RevId: 325500772
2020-08-07Port Startup and Density Benchmarks.Zach Koopmans
PiperOrigin-RevId: 325497346
2020-08-07tcp: change the limit of TCP_LINGER2Andrei Vagin
It was changed in the Linux kernel: commit f0628c524fd188c3f9418e12478dfdfadacba815 Date: Fri Apr 24 16:06:16 2020 +0800 net: Replace the limit of TCP_LINGER2 with TCP_FIN_TIMEOUT_MAX PiperOrigin-RevId: 325493859
2020-08-07Support separate read/write handles in fsimpl/gofer.dentry.Jamie Liu
PiperOrigin-RevId: 325490674
2020-08-07[runtime tests] Exclude flaky/failing testsAyush Ranjan
PiperOrigin-RevId: 325481011
2020-08-07Tolerate EINTR from fallocate() in inotify test.Jamie Liu
PiperOrigin-RevId: 325472312
2020-08-06Add LinkAt support to goferFabricio Voznika
Updates #1198 PiperOrigin-RevId: 325350818
2020-08-06Add bzl_library rules for .bzl files without one.Adin Scannell
PiperOrigin-RevId: 325280924
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 11:21:05 +0000