summaryrefslogtreecommitdiffhomepage
path: root/test
AgeCommit message (Collapse)Author
2020-03-13Skip process if it has exitedFabricio Voznika
PiperOrigin-RevId: 300802159
2020-03-12Remove flaky network namespace test that uses clone().Ting-Yu Wang
PiperOrigin-RevId: 300626011
2020-03-12Kill sandbox process when parent process terminatesFabricio Voznika
When the sandbox runs in attached more, e.g. runsc do, runsc run, the sandbox lifetime is controlled by the parent process. This wasn't working in all cases because PR_GET_PDEATHSIG doesn't propagate through execve when the process changes uid/gid. So it was getting dropped when the sandbox execve's to change to user nobody. PiperOrigin-RevId: 300601247
2020-03-11iptables: ready tests to be enabled in kokoroKevin Krakauer
Fixed flakes (tested via --runs_per_test=100) and added skips for not-yet-implemented features. Once submitted, the iptables tests will be ready to enable in kokoro.
2020-03-11Merge pull request #1975 from nybidari:iptablesgVisor bot
PiperOrigin-RevId: 300362789
2020-03-10Make checkpoint/restore e2e test less flakyIan Lewis
PiperOrigin-RevId: 300171916
2020-03-09Move /proc/net to /proc/PID/net, and make /proc/net -> /proc/self/net.Ting-Yu Wang
Issue #1833 PiperOrigin-RevId: 299998105
2020-03-09perf/signal: rewrite code in assembly to avoid compiler optimizationsAndrei Vagin
Without this change, the assembly code of this test compiled without optimizations: mov -0x150(%rbp),%rax movl $0x77777777,(%rax) lea -0x128(%rbp),%rax with optimizations: movl $0x77777777,0x0 This code doesn't work properly, because the test changes rax in the segv handler. PiperOrigin-RevId: 299896117
2020-03-06shutdown(s, SHUT_WR) in TIME-WAIT returns ENOTCONNEyal Soha
From RFC 793 s3.9 p61 Event Processing: CLOSE Call during TIME-WAIT: return with "error: connection closing" Fixes #1603 PiperOrigin-RevId: 299401353
2020-03-06Move packetdrill tests to open-sourceEyal Soha
PiperOrigin-RevId: 299396286
2020-03-05Stub oom_score_adj and oom_score.Ian Lewis
Adds an oom_score_adj and oom_score proc file stub. oom_score_adj accepts writes of values -1000 to 1000 and persists the value with the task. New tasks inherit the parent's oom_score_adj. oom_score is a read-only stub that always returns the value '0'. Issue #202 PiperOrigin-RevId: 299245355
2020-03-05Merge pull request #2036 from xiaobo55x:syscall_testgVisor bot
PiperOrigin-RevId: 299151227
2020-03-04Merge pull request #2054 from avagin:gvisor-testgVisor bot
PiperOrigin-RevId: 298951909
2020-03-04test/runner: use proper filters for test casesAndrei Vagin
The benchmark_filter options accepts regex-s, but the gtest-filter option accepts shell-like wildcards. Fixes #2034 Signed-off-by: Andrei Vagin <avagin@gmail.com>
2020-03-04Use shuf instead of $RANDOM everywhere.Eyal Soha
$RANDOM can cause collisions but shuf uses /dev/urandom so it ought to cause fewer. PiperOrigin-RevId: 298786344
2020-03-03Merge pull request #2008 from lubinszARM:pr_skip_vsyscallgVisor bot
PiperOrigin-RevId: 298683693
2020-03-03Merge pull request #2043 from lubinszARM:pr_clean1gVisor bot
PiperOrigin-RevId: 298683502
2020-03-03Move temp_umask to test/util.Adin Scannell
PiperOrigin-RevId: 298667595
2020-03-03code clean: minor changes to compatible with ubuntu18.04Bin Lu
Signed-off-by: Bin Lu <bin.lu@arm.com>
2020-03-02Fix panic caused by invalid address for Bind in packet sockets.Nayana Bidari
PiperOrigin-RevId: 298476533
2020-03-02Fix data-race when reading/writing e.amss.Bhasker Hariharan
PiperOrigin-RevId: 298451319
2020-03-02Fix syscall test build error on arm64.Haibo Xu
The error was introduced in the merge of PR #1471. Some codes are missing when adding bazel select_arch command to the test/syscall/linux/BUILD file. Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I8cae3f4ae78c2e14671f3ac6e7361dc2806d9305
2020-02-28Mark gettid and getdents as nogotsanZach Koopmans
PiperOrigin-RevId: 297915815
2020-02-28Hide /dev/net/tun when using hostinet.Ting-Yu Wang
/dev/net/tun does not currently work with hostinet. This has caused some program starts failing because it thinks the feature exists. PiperOrigin-RevId: 297876196
2020-02-28skip vsyscall test cases on Arm64Bin Lu
Signed-off-by: Bin Lu <bin.lu@arm.com>
2020-02-27Internal change.Nayana Bidari
PiperOrigin-RevId: 297638665
2020-02-26Add getsockopt tests for SO_SNDTIMEO and SO_RCVTIMEOJay Zhuang
PiperOrigin-RevId: 297485310
2020-02-25Merge branch 'master' into iptablesnybidari
2020-02-25Add nat table support for iptables.Nayana Bidari
- commit the changes for the comments.
2020-02-24Add default behavior for gtest runner.Adin Scannell
PiperOrigin-RevId: 297009116
2020-02-24Merge pull request #1886 from avagin:arm64-travis-cigVisor bot
PiperOrigin-RevId: 296975376
2020-02-21arm64: add a travis build ciAndrei Vagin
Build runsc and run "runsc do ls". Signed-off-by: Andrei Vagin <avagin@gmail.com>
2020-02-21Implement tap/tun device in vfs.Ting-Yu Wang
PiperOrigin-RevId: 296526279
2020-02-21Factor platform tags.Adin Scannell
PiperOrigin-RevId: 296519566
2020-02-20Initial network namespace support.gVisor bot
TCP/IP will work with netstack networking. hostinet doesn't work, and sockets will have the same behavior as it is now. Before the userspace is able to create device, the default loopback device can be used to test. /proc/net and /sys/net will still be connected to the root network stack; this is the same behavior now. Issue #1833 PiperOrigin-RevId: 296309389
2020-02-19Add basic microbenchmarks.Adin Scannell
PiperOrigin-RevId: 296104390
2020-02-19Include more test files in exports_filesgVisor bot
So that they can be included by Fuchsia's syscall tests PiperOrigin-RevId: 296030383
2020-02-18Enable IPV6_RECVTCLASS socket option for datagram socketsgVisor bot
Added the ability to get/set the IP_RECVTCLASS socket option on UDP endpoints. If enabled, traffic class from the incoming Network Header passed as ancillary data in the ControlMessages. Adding Get/SetSockOptBool to decrease the overhead of getting/setting simple options. (This was absorbed in a CL that will be landing before this one). Test: * Added unit test to udp_test.go that tests getting/setting as well as verifying that we receive expected TOS from incoming packet. * Added a syscall test for verifying getting/setting * Removed test skip for existing syscall test to enable end to end test. PiperOrigin-RevId: 295840218
2020-02-18iptables: use "-t nat" for NAT testsgVisor bot
PiperOrigin-RevId: 295835807
2020-02-18Deflake fallocate syscall test.gVisor bot
- Retry if fallocate returns EINTR. - If fallocate fails, don't try to fstat and confirm the result. PiperOrigin-RevId: 295789790
2020-02-18Merge pull request #1850 from kevinGC:jump2gVisor bot
PiperOrigin-RevId: 295785052
2020-02-18Add nat table support for iptables.Nayana Bidari
Add nat table support for Prerouting hook with Redirect option. Add tests to check redirect of ports.
2020-02-13We can now create and jump in iptables. For example:Kevin Krakauer
$ iptables -N foochain $ iptables -A INPUT -j foochain
2020-02-13Merge pull request #1791 from kevinGC:uchainsgVisor bot
PiperOrigin-RevId: 294957297
2020-02-13Internal change.gVisor bot
PiperOrigin-RevId: 294952610
2020-02-12iptables: User chainsKevin Krakauer
- Adds creation of user chains via `-N <chainname>` - Adds `-j RETURN` support for built-in chains, which triggers the chain's underflow rule (usually the default policy). - Adds tests for chain creation, default policies, and `-j RETURN' from built-in chains.
2020-02-12Include more test files in exports_filesgVisor bot
So that they can be included by Fuchsia's syscall tests PiperOrigin-RevId: 294654890
2020-02-11Fix up test/runtimes/README.md.gVisor bot
In particular, explain how to push updates to the images. PiperOrigin-RevId: 294508879
2020-02-10Update visibility.Adin Scannell
PiperOrigin-RevId: 294265019
2020-02-10iptables: add instructions for runsc building.Kevin Krakauer
The readme didn't mention that users need to: - `bazel build` when working on iptables tests - enable raw sockets in /etc/docker/daemon.json. PiperOrigin-RevId: 294260169
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 17:21:57 +0000