Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 311011004
|
|
PiperOrigin-RevId: 310949277
|
|
PiperOrigin-RevId: 310941717
|
|
Enables commands with -o (--out-interface) for iptables rules.
$ iptables -A OUTPUT -o eth0 -j ACCEPT
PiperOrigin-RevId: 310642286
|
|
Fixes #2654
PiperOrigin-RevId: 310642216
|
|
This fixed the corresponding packetimpact test.
PiperOrigin-RevId: 310593470
|
|
PiperOrigin-RevId: 310409922
|
|
PiperOrigin-RevId: 310213705
|
|
connect() returns EINTR after S/R and usually we
use RetryEINTR to workaround this.
PiperOrigin-RevId: 310038525
|
|
As per RFC 1122 4.2.2.17, when the remote advertizes zero receive window,
the sender needs to probe for the window-size to become non-zero starting
from the next retransmission interval. The TCP connection needs to be kept
open as long as the remote is acknowledging the zero window probes.
We reuse the retransmission timers to support this.
Fixes #1644
PiperOrigin-RevId: 310021575
|
|
PiperOrigin-RevId: 310001058
|
|
And move sys_timerfd.go to just timerfd.go for consistency.
Updates #1475.
PiperOrigin-RevId: 309835029
|
|
PiperOrigin-RevId: 309832671
|
|
There is the known issue of the linux procfs, that two consequent calls of
readdir can return the same entry twice if between these calls one or more
entries have been removed from this directory.
PiperOrigin-RevId: 309803066
|
|
PiperOrigin-RevId: 309783486
|
|
PiperOrigin-RevId: 309506957
|
|
Connection tracking is used to track packets in prerouting and
output hooks of iptables. The NAT rules modify the tuples in
connections. The connection tracking code modifies the packets by
looking at the modified tuples.
|
|
PiperOrigin-RevId: 309467878
|
|
Previously the test used an out-dated window size which is advertised
during the handshake to generate testing packets, but the window size
has changed since the handshake; currently it is using the most recent
one which is advertised in DUT's ACK to our FIN packet to generate the
testing outside-the-window packets.
PiperOrigin-RevId: 309222921
|
|
Enforce write permission checks in BoundEndpointAt, which corresponds to the
permission checks in Linux (net/unix/af_unix.c:unix_find_other).
Also, create bound socket files with the correct permissions in VFS2.
Fixes #2324.
PiperOrigin-RevId: 308949084
|
|
PiperOrigin-RevId: 308940886
|
|
TempPath's destructor runs at the end of the named pipe creation functions,
deleting the named pipe. If the named pipe is backed by a "non-virtual"
filesystem (!fs.Inode.IsVirtual()), this causes the following save attempt to
fail because there are FDs holding the deleted named pipe open.
PiperOrigin-RevId: 308861999
|
|
Closes #2489
PiperOrigin-RevId: 308362434
|
|
Tested:
When run on Linux, a correct ICMPv6 response is received. On netstack, no
ICMPv6 response is received.
PiperOrigin-RevId: 308343113
|
|
Display the errors as diffs between the expected and wanted frame.
PiperOrigin-RevId: 308333271
|
|
PiperOrigin-RevId: 308328860
|
|
This change moves all Docker images to a standard location, and abstracts the
build process so that they can be maintained in an automated fashion. This also
allows the images to be architecture-independent.
All images will now be referred to by the test framework via the canonical
`gvisor.dev/images/<name>`, where `<name>` is a function of the path within the
source tree.
In a subsequent change, continuous integration will be added so that the images
will always be correct and available locally.
In the end, using `bazel` for Docker containers is simply not possible. Given
that we already have the need to use `make` with the base container (for
Docker), we extend this approach to get more flexibility.
This change also adds a self-documenting and powerful Makefile that is intended
to replace the collection of scripts in scripts. Canonical (self-documenting)
targets can be added here for targets that understand which images need to be
loaded and/or built.
PiperOrigin-RevId: 308322438
|
|
mergo was improperly merging nil and empty strings
PiperOrigin-RevId: 308170862
|
|
Tested:
Intentionally introduce an error and then run:
blaze test --test_output=streamed //third_party/gvisor/test/packetimpact/tests:tcp_outside_the_window_linux_test
PiperOrigin-RevId: 308114194
|
|
This change adds a layer of abstraction around the internal Docker APIs,
and eliminates all direct dependencies on Dockerfiles in the infrastructure.
A subsequent change will automated the generation of local images (with
efficient caching). Note that this change drops the use of bazel container
rules, as that experiment does not seem to be viable.
PiperOrigin-RevId: 308095430
|
|
This will make it easier to notice if a code change causes an existing test to
pass.
PiperOrigin-RevId: 308057978
|
|
Right now, sentry panics in this case:
panic: close of nil channel
goroutine 67 [running]:
pkg/tcpip/transport/tcp/tcp.(*endpoint).listen(0xc0000ce000, 0x9, 0x0)
pkg/tcpip/transport/tcp/endpoint.go:2208 +0x170
pkg/tcpip/transport/tcp/tcp.(*endpoint).Listen(0xc0000ce000, 0x9, 0xc0003a1ad0)
pkg/tcpip/transport/tcp/endpoint.go:2179 +0x50
Fixes #2468
PiperOrigin-RevId: 307896725
|
|
PiperOrigin-RevId: 307812340
|
|
PiperOrigin-RevId: 307708653
|
|
PiperOrigin-RevId: 307638329
|
|
PiperOrigin-RevId: 307622320
|
|
This change renames the tools/images directory to tools/vm for clarity, and
adds a functional vm_test. Sharding is also added to the same test, and some
documentation added around key flags & variables to describe how they work.
Subsequent changes will add vm_tests for other cases, such as the runtime tests.
PiperOrigin-RevId: 307492245
|
|
PiperOrigin-RevId: 307453436
|
|
Fixed to match RFC 793 page 69.
Fixes #1607
PiperOrigin-RevId: 307334892
|
|
PiperOrigin-RevId: 307328289
|
|
prlimit was erroneously comparing UIDs and GIDs when getting/setting a process'
own limits. From the manpage:
To set or get the resources of a process other than itself, the caller must have
the CAP_SYS_RESOURCE capability, or the real, effective, and saved set user IDs
of the target process must match the real user ID of the caller and the real,
effective, and saved set group IDs of the target process must match the real
group ID of the caller.
PiperOrigin-RevId: 307127266
|
|
This is to make easier to find corresponding logs in
case test fails.
PiperOrigin-RevId: 307104283
|
|
PiperOrigin-RevId: 307069884
|
|
Updates #1035
PiperOrigin-RevId: 306968644
|
|
When the listening socket is read shutdown, we need to reset all pending
and incoming connections. Ensure that the endpoint is not cleaned up
from the demuxer and subsequent bind to same port does not go through.
PiperOrigin-RevId: 306958038
|
|
PiperOrigin-RevId: 306930652
|
|
TCP, in CLOSE-WAIT state, MUST return ACK with proper SEQ and ACK numbers after
recv a seg with OTW SEQ or unacc ACK number, and remain in same state. If the
connection is in a synchronized state, any unacceptable segment (out of window
sequence number or unacceptable acknowledgment number) must elicit only an empty
acknowledgment segment containing the current send-sequence number and an
acknowledgment indicating the next sequence number expected to be received, and
the connection remains in the same state.
PiperOrigin-RevId: 306897984
|
|
The tests are based on RFC 793 page 69.
Updates #1607
PiperOrigin-RevId: 306768847
|
|
PiperOrigin-RevId: 306726587
|
|
Removed the TODO to use netlink.
PiperOrigin-RevId: 306721468
|