summaryrefslogtreecommitdiffhomepage
path: root/test
AgeCommit message (Collapse)Author
2020-10-22arm64 test: enabled Fault() functionBin Lu
Currently, this Fault() function does not work properly on the arm platform. After modification, sigaltstack_test_runsc_kvm can be passed on Arm64. Signed-off-by: Bin Lu <bin.lu@arm.com>
2020-10-15Syncing packetimpact tests in different directoriesZeling Feng
By exposing an ALL_TESTS list in defs.bzl we can make sure all packetimpact users get to agree on the list of all tests. A defect in this approach is that we have to keep a list of packetimpact_testbench rules in the BUILD file. An helper validate_all_tests has been added to help keep BUILD and .bzl files in sync. PiperOrigin-RevId: 337411839
2020-10-12gvisor/test: Set nogotsan for native testsAndrei Vagin
Tests are written in C++ and there is no reason to run them with gotsan without gVisor. PiperOrigin-RevId: 336783276
2020-10-09TCP Receive window advertisement fixes.Bhasker Hariharan
The fix in commit 028e045da93b7c1c26417e80e4b4e388b86a713d was incorrect as it can cause the right edge of the window to shrink when we announce a zero window due to receive buffer being full as its done before the check for seeing if the window is being shrunk because of the selected window. Further the window was calculated purely on available space but in cases where we are getting full sized segments it makes more sense to use the actual bytes being held. This CL changes to use the lower of the total available space vs the available space in the maximal window we could advertise minus the actual payload bytes being held. This change also cleans up the code so that the window selection logic is not duplicated between getSendParams() and windowCrossedACKThresholdLocked. PiperOrigin-RevId: 336404827
2020-10-09Add gvisor webhook configurationKevin Krakauer
PiperOrigin-RevId: 336393190
2020-10-09Add parsers golang benchmarks.Zach Koopmans
Add parser and formatting for golang benchmarks for docker benchmarks. Change adds a library for printing and parsing Test parameters and metrics. Benchmarks use the library to print parameters in the Benchmark title (e.g. the name field in b.Run()), and to report CustomMetrics. Parser uses the library to parse printed data from benchmark output and put it into BigQuery structs. PiperOrigin-RevId: 336365628
2020-10-09Set expect_failure flags on tests that currently fails on fuchsiaZeling Feng
PiperOrigin-RevId: 336350318
2020-10-09test/syscall/iptables: don't use designated initializersAndrei Vagin
test/syscalls/linux/iptables.cc:130:3: error: C99 designator 'name' outside aggregate initializer 130 | }; | PiperOrigin-RevId: 336331738
2020-10-07Add staticcheck and staticstyle analyzers.Adin Scannell
This change also adds support to go_stateify for detecting an appropriate receiver name, avoiding a large number of false positives. PiperOrigin-RevId: 335994587
2020-10-07[runtime-tests] Exclude failing test due to expired cert.Ayush Ranjan
PiperOrigin-RevId: 335927821
2020-10-06Add support for IPv6 fragmentationArthur Sfez
Most of the IPv4 fragmentation code was moved in the fragmentation package and it is reused by IPv6 fragmentation. Test: - pkg/tcpip/network/ipv4:ipv4_test - pkg/tcpip/network/ipv6:ipv6_test - pkg/tcpip/network/fragmentation:fragmentation_test Fixes #4389 PiperOrigin-RevId: 335714280
2020-10-06Implement membarrier(2) commands other than *_SYNC_CORE.Jamie Liu
Updates #267 PiperOrigin-RevId: 335713923
2020-10-05Enable more VFS2 testsFabricio Voznika
Updates #1487 PiperOrigin-RevId: 335516732
2020-10-05Remove reference to deleted scriptKevin Krakauer
PiperOrigin-RevId: 335516625
2020-10-05Internal change.gVisor bot
PiperOrigin-RevId: 335429072
2020-10-03Fix kcov enabling and disabling procedures.Dean Deng
- When the KCOV_ENABLE_TRACE ioctl is called with the trace kind KCOV_TRACE_PC, the kcov mode should be set to KCOV_*MODE*_TRACE_PC. - When the owning task of kcov exits, the memory mapping should not be cleared so it can be used by other tasks. - Add more tests (also tested on native Linux kcov). PiperOrigin-RevId: 335202585
2020-10-02Actually disable nodejs test parallel/test-fs-write-stream-double-close.Jamie Liu
PiperOrigin-RevId: 335070320
2020-09-30Ensure proctor is built as pure Go binary.Adin Scannell
PiperOrigin-RevId: 334716351
2020-09-30ip6tables: redirect supportKevin Krakauer
Adds support for the IPv6-compatible redirect target. Redirection is a limited form of DNAT, where the destination is always the localhost. Updates #3549. PiperOrigin-RevId: 334698344
2020-09-29Stop depending on go_binary targets.Adin Scannell
Closes #3374 PiperOrigin-RevId: 334505627
2020-09-29Add /proc/[pid]/cwdFabricio Voznika
PiperOrigin-RevId: 334478850
2020-09-29iptables: refactor to make targets extendableKevin Krakauer
Like matchers, targets should use a module-like register/lookup system. This replaces the brittle switch statements we had before. The only behavior change is supporing IPT_GET_REVISION_TARGET. This makes it much easier to add IPv6 redirect in the next change. Updates #3549. PiperOrigin-RevId: 334469418
2020-09-29Migrates uses of deprecated map types to recommended types.gVisor bot
PiperOrigin-RevId: 334419854
2020-09-28Fix lingering of TCP socket in the initial state.Nayana Bidari
When the socket is set with SO_LINGER and close()'d in the initial state, it should not linger and return immediately. PiperOrigin-RevId: 334263149
2020-09-28Support creating protocol instances with Stack refGhanan Gowripalan
Network or transport protocols may want to reach the stack. Support this by letting the stack create the protocol instances so it can pass a reference to itself at protocol creation time. Note, protocols do not yet use the stack in this CL but later CLs will make use of the stack from protocols. PiperOrigin-RevId: 334260210
2020-09-28Support inotify in overlayfs.Dean Deng
Fixes #1479, #317. PiperOrigin-RevId: 334258052
2020-09-27Clean up kcov.Dean Deng
Previously, we did not check the kcov mode when performing task work. As a result, disabling kcov did not do anything. Also avoid expensive atomic RMW when consuming coverage data. We don't need the swap if the value is already zero (which is most of the time), and it is ok if there are slight inconsistencies due to a race between coverage data generation (incrementing the value) and consumption (reading a nonzero value and writing zero). PiperOrigin-RevId: 334049207
2020-09-25Disable flaky java11 tests.Jamie Liu
Regarding ThreadCpuTimeArray.java: The test starts 10 threads, each of which does some computation, then blocks. When all threads are blocked, the test sleeps for 200ms, then checks that less than 100ns of CPU time in userspace elapse over the course of the sleep; AFAICT, the 100ns of slop is because a thread indicates that it's in the WAITING state before it actually blocks, and because signals can cause threads to be temporarily woken. gVisor's CPU clocks have a granularity of 10ms (the interval of Kernel.cpuClockTicker is //pkg/abi/linux.ClockTick), so a single tick pushes the test over the threshold. PiperOrigin-RevId: 333830287
2020-09-24Fix Nginx Startup and Size Benchmarks.Zach Koopmans
Changes in Nginx Benchmarks in network_tests also affect Startup/Size Nginx Benchmarks. Make sure the commands line up. PiperOrigin-RevId: 333543697
2020-09-24Change segment/pending queue to use receive buffer limits.Bhasker Hariharan
segment_queue today has its own standalone limit of MaxUnprocessedSegments but this can be a problem in UnlockUser() we do not release the lock till there are segments to be processed. What can happen is as handleSegments dequeues packets more keep getting queued and we will never release the lock. This can keep happening even if the receive buffer is full because nothing can read() till we release the lock. Further having a separate limit for pending segments makes it harder to track memory usage etc. Unifying the limits makes it easier to reason about memory in use and makes the overall buffer behaviour more consistent. PiperOrigin-RevId: 333508122
2020-09-24test/syscall/mknod: Don't use a hard-coded file nameAndrei Vagin
PiperOrigin-RevId: 333461380
2020-09-23Clean up inotify tests.Dean Deng
Mostly simplifies SKIP_IF statements and adds some more documentation. Also, mknod is now supported by gofer fs, so remove SKIP_IFs related to this. PiperOrigin-RevId: 333449932
2020-09-23Remove unused scripts.Ayush Ranjan
PiperOrigin-RevId: 333408633
2020-09-23Clean up flag.* usage in packetimpact's runner.RegisterFlagsZeling Feng
PiperOrigin-RevId: 333400865
2020-09-21Receive ACK when deleting address in syscall testsGhanan Gowripalan
PiperOrigin-RevId: 332961666
2020-09-21Fix socket_ipv4_udp_unbound_test_native in opensource.Zach Koopmans
Calls to recv sometimes fail with EAGAIN, so call select beforehand. PiperOrigin-RevId: 332943156
2020-09-21Fix proc_net_test_native for native tests.Zach Koopmans
"DefaultValueEqZero" is only valid if the test is in a sandbox. Our CI VMs often have "/proc/sys/net/ipv4/ip_forward" set to 1. PiperOrigin-RevId: 332910859
2020-09-21Add ftruncate test for writeable fd but no write permissions.Dean Deng
PiperOrigin-RevId: 332907453
2020-09-21Fix flakes in UdpSocketTestZach Koopmans
`recv` calls with MSG_DONTWAIT can fail with EAGAIN randomly in tests. Fix this by calling `select` on sockets with a timeout prior to attempting a `recv`. PiperOrigin-RevId: 332873735
2020-09-20Merge pull request #3651 from ianlewis:ip-forwardinggVisor bot
PiperOrigin-RevId: 332760843
2020-09-18Disable vdso_clock_gettime on KVM.Jamie Liu
Unfortunately, I think TSC misalignment means that we can't really expect any consistent correspondence between a TSC-based VDSO and the sentry's view of time on the KVM platform. PiperOrigin-RevId: 332576147
2020-09-18Deflake stat_test with save/restore enabled.Nicolas Lacasse
PiperOrigin-RevId: 332546659
2020-09-18Implement fsimpl/overlay.filesystem.RenameAt.Jamie Liu
Updates #1199 PiperOrigin-RevId: 332539197
2020-09-18Disable PHP test ext/standard/tests/streams/proc_open_bug60120.phpt.Jamie Liu
PiperOrigin-RevId: 332521647
2020-09-18Use a tmpfs file for shared anonymous and /dev/zero mmap on VFS2.Jamie Liu
This is more consistent with Linux (see comment on MM.NewSharedAnonMappable()). We don't do the same thing on VFS1 for reasons documented by the updated comment. PiperOrigin-RevId: 332514849
2020-09-18Remove SKIP_IF for now-supported features.Kevin Krakauer
Updates #3549. PiperOrigin-RevId: 332501660
2020-09-18Enqueue TCP sends arriving in SYN_SENT state.Mithun Iyer
TCP needs to enqueue any send requests arriving when the connection is in SYN_SENT state. The data should be sent out soon after completion of the connection handshake. Fixes #3995 PiperOrigin-RevId: 332482041
2020-09-17ip6tables: filter table supportKevin Krakauer
`ip6tables -t filter` is now usable. NAT support will come in a future CL. #3549 PiperOrigin-RevId: 332381801
2020-09-17{Set,Get} SO_LINGER on all endpoints.Nayana Bidari
SO_LINGER is a socket level option and should be stored on all endpoints even though it is used to linger only for TCP endpoints. PiperOrigin-RevId: 332369252
2020-09-17[testing] Use container address to talk to server running inside container.Ayush Ranjan
Docker does not have IPv6 port forwarding as tracked by the following issue: https://github.com/moby/moby/issues/11518 So when running bazel itself inside a docker container, we can not use the host port bindings to communicate with sockets inside the container. This was causing integration tests and image tests to fail when run through our Makefile targets. PiperOrigin-RevId: 332355051
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 21:35:20 +0000