Age | Commit message (Collapse) | Author |
|
iptables sockopts were kludged into an unnecessary check, this properly
relegates them to the {get,set}SockOptIP functions.
PiperOrigin-RevId: 328395135
|
|
Updates #3374
PiperOrigin-RevId: 328378700
|
|
When SO_LINGER option is enabled, the close will not return until all the
queued messages are sent and acknowledged for the socket or linger timeout is
reached. If the option is not set, close will return immediately. This option
is mainly supported for connection oriented protocols such as TCP.
PiperOrigin-RevId: 328350576
|
|
These tests print disk_free_space()/disk_total_space() and expect the printed
result to be an integer (despite the fact that both the documented and returned
type is float). After cl/297213789, free/total disk space on tmpfs is
sufficiently large that PHP prints the result in scientific notation instead:
========DIFF========
012+ float(9.2233720368548E+18)
013+ float(9.2233720368548E+18)
012- float(%d)
013- float(%d)
========DONE========
FAIL disk_total_space() and disk_free_space() tests [ext/standard/tests/file/disk.phpt]
PiperOrigin-RevId: 328349906
|
|
We still deviate a bit from linux in how long we will actually wait in
FIN-WAIT-2. Linux seems to cap it with TIME_WAIT_LEN and it's not completely
obvious as to why it's done that way. For now I think we can ignore that and
fix it if it really is an issue.
PiperOrigin-RevId: 328324922
|
|
When a loopback interface is configurd with an address and associated
subnet, the loopback should treat all addresses in that subnet as an
address it owns.
This is mimicking linux behaviour as seen below:
```
$ ip addr show dev lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ...
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ping 192.0.2.1
PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data.
^C
--- 192.0.2.1 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 1018ms
$ ping 192.0.2.2
PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data.
^C
--- 192.0.2.2 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2039ms
$ sudo ip addr add 192.0.2.1/24 dev lo
$ ip addr show dev lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ...
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 192.0.2.1/24 scope global lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ping 192.0.2.1
PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data.
64 bytes from 192.0.2.1: icmp_seq=1 ttl=64 time=0.131 ms
64 bytes from 192.0.2.1: icmp_seq=2 ttl=64 time=0.046 ms
64 bytes from 192.0.2.1: icmp_seq=3 ttl=64 time=0.048 ms
^C
--- 192.0.2.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2042ms
rtt min/avg/max/mdev = 0.046/0.075/0.131/0.039 ms
$ ping 192.0.2.2
PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data.
64 bytes from 192.0.2.2: icmp_seq=1 ttl=64 time=0.131 ms
64 bytes from 192.0.2.2: icmp_seq=2 ttl=64 time=0.069 ms
64 bytes from 192.0.2.2: icmp_seq=3 ttl=64 time=0.049 ms
64 bytes from 192.0.2.2: icmp_seq=4 ttl=64 time=0.035 ms
^C
--- 192.0.2.2 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3049ms
rtt min/avg/max/mdev = 0.035/0.071/0.131/0.036 ms
```
Test: integration_test.TestLoopbackAcceptAllInSubnet
PiperOrigin-RevId: 328188546
|
|
PiperOrigin-RevId: 328157101
|
|
Add tests for socket re-bind/listen of client and server sockets
with the older connection still in TIME_WAIT state and with
SO_REUSEADDR enabled.
PiperOrigin-RevId: 327924702
|
|
It frequently times out under GoTSAN.
PiperOrigin-RevId: 327894343
|
|
The order of unlink events (dir event/file event) is undefined,
so make tests accept both orderings.
PiperOrigin-RevId: 327873316
|
|
gVisor emulates 4.6 kernel versions, and test doesn't work on 5.0 versions
(observed on our Ubuntu18.04 image). Skip it.
PiperOrigin-RevId: 327845037
|
|
They time out.
PiperOrigin-RevId: 327830892
|
|
This is done to ease troubleshooting when tests fail. runsc
logs are not stored when tests passe, so this will only
affect failing tests and should not increase log storage
too badly.
PiperOrigin-RevId: 327717551
|
|
PiperOrigin-RevId: 327686558
|
|
Accept 128 + SIGNAL as well as SIGNAL as valid
returns for fork/exec tests.
Also, make changes so that test compiles in opensource. Test
had compile errors on latest Ubuntu 16.04 image with updated bazel to
3.4.0 (as well as base 2.0) used for Kokoro tests.
PiperOrigin-RevId: 327510310
|
|
Tests that we have the correct initial (empty) state for ip6tables.
#3549
PiperOrigin-RevId: 327477657
|
|
Skip check for ECN bits in native/linux tests. General advice
for the ECN field is to leave the setting to the kernel, so
behavior of the test is undefined for different kernels.
http://www.masterraghu.com/subjects/np/introduction/unix_network_programming_v1.3/ch07lev1sec6.html
PiperOrigin-RevId: 327451414
|
|
test_eintr now passes in the Python runtime tests.
Updates #3515.
PiperOrigin-RevId: 327441081
|
|
Some machines return 128 + signal for failures. Accept that
as a valid result.
PiperOrigin-RevId: 327326113
|
|
tv_usec field should be a multiple of 4K to pass
in open source on linux/native, so make it one.
PiperOrigin-RevId: 327288405
|
|
Skip InvalidOffset and InvalidLength for Linux as the test is invalid for
later Kernel versions.
Add UnsupportedFile test as this check is in all kernel versions.
PiperOrigin-RevId: 327248035
|
|
Some systems return 128 + errno instead of just errno, which is the case
here.
PiperOrigin-RevId: 327247836
|
|
Setting timeouts for sockets on GCP images (debian) for usecs only
respects multiples of 4K. Set the test with a multiple of 4K with a comment.
PiperOrigin-RevId: 327093848
|
|
Fixes python runtime test test_glob.
Updates #3515
We were checking is the to-be-opened dentry is a dir or not before resolving
symlinks. We should check that after resolving symlinks.
This was preventing us from opening a symlink which pointed to a directory
with O_DIRECTORY.
Also added this check in tmpfs and removed a duplicate check.
PiperOrigin-RevId: 327085895
|
|
PiperOrigin-RevId: 326733912
|
|
PiperOrigin-RevId: 326693922
|
|
PiperOrigin-RevId: 326686761
|
|
This is a preparatory commit for a larger commit working on
ICMP generation in error cases.
This is removal of technical debt and cleanup in the gvisor code
as part of gvisor issue 2211.
Updates #2211.
PiperOrigin-RevId: 326615389
|
|
Fixes php runtime test ext/standard/tests/file/readfile_basic.phpt
Fixes #3516
fsgofers only want the access mode in the OpenFlags passed to Create(). If more
flags are supplied (like O_APPEND in this case), read/write from that fd will
fail with EBADF. See runsc/fsgofer/fsgofer.go:WriteAt()
VFS2 was providing more than just access modes. So filtering the flags using
p9.OpenFlagsModeMask == linux.O_ACCMODE fixes the issue.
Gofer in VFS1 also only extracts the access mode flags while making the create
RPC. See pkg/sentry/fs/gofer/path.go:Create()
Even in VFS2, when we open a handle, we extract out only the access mode flags
+ O_TRUNC.
See third_party/gvisor/pkg/sentry/fsimpl/gofer/handle.go:openHandle()
Added a test for this.
PiperOrigin-RevId: 326574829
|
|
PiperOrigin-RevId: 326553620
|
|
Netstack's TIME-WAIT state for a TCP socket could be terminated prematurely if
the socket entered TIME-WAIT using shutdown(..., SHUT_RDWR) and then was closed
using close(). This fixes that bug and updates the tests to verify that Netstack
correctly honors TIME-WAIT under such conditions.
Fixes #3106
PiperOrigin-RevId: 326456443
|
|
Fixes php test ext/standard/tests/file/touch_variation5.phpt on vfs2.
Updates #3516
Also spotted a bug with O_EXCL, where we did not return EEXIST when we tried
to open the root of the filesystem with O_EXCL | O_CREAT.
Added some more tests for open() corner cases.
PiperOrigin-RevId: 326346863
|
|
PiperOrigin-RevId: 326313858
|
|
The code was deleting logs for all tests when a single test
passed. Change it to delete only the logs relevant to the
test at hand.
Also fixed the benchmark lookup code, which was always generating
a single empty benchmark entry if there were not benchmarks.
PiperOrigin-RevId: 326311477
|
|
Mark all tests passing for VFS2 in:
image_test
integration_test
There's no way to do negative look ahead/behind in golang test regex,
so check if the tests uses VFS2 and skip CheckPointRestore if it does.
PiperOrigin-RevId: 326050915
|
|
FUSE_GETATTR is called when a stat(2), fstat(2), or lstat(2) is issued
from VFS2 layer to a FUSE filesystem.
Fixes #3175
|
|
//test/iptables:iptables_test runs 30 seconds faster on my machine.
* Using contexts instead of many smaller timeouts makes the tests less
likely to flake and removes unnecessary complexity.
* We also use context to properly shut down concurrent goroutines and
the test container.
* Container logs are always logged.
|
|
IPPacketInfo.DestinationAddr should hold the destination of the IP
packet, not the source. This change fixes that bug.
PiperOrigin-RevId: 325910766
|
|
Fixes #2923
PiperOrigin-RevId: 325904734
|
|
PiperOrigin-RevId: 325892974
|
|
Remove the old benchmark-tools directory, including
imports in the WORKSPACE file and associated bazel rules.
The new Golang benchmark-tools can be found at //test/benchmarks
and it is functionally equivalent, excepting syscall_test
which can be found in //test/perf/linux.
PiperOrigin-RevId: 325529075
|
|
PiperOrigin-RevId: 325500772
|
|
PiperOrigin-RevId: 325497346
|
|
It was changed in the Linux kernel:
commit f0628c524fd188c3f9418e12478dfdfadacba815
Date: Fri Apr 24 16:06:16 2020 +0800
net: Replace the limit of TCP_LINGER2 with TCP_FIN_TIMEOUT_MAX
PiperOrigin-RevId: 325493859
|
|
PiperOrigin-RevId: 325490674
|
|
PiperOrigin-RevId: 325481011
|
|
PiperOrigin-RevId: 325472312
|
|
Updates #1198
PiperOrigin-RevId: 325350818
|
|
PiperOrigin-RevId: 325280924
|
|
PiperOrigin-RevId: 325269275
|