summaryrefslogtreecommitdiffhomepage
path: root/test
AgeCommit message (Collapse)Author
2020-09-30Ensure proctor is built as pure Go binary.Adin Scannell
PiperOrigin-RevId: 334716351
2020-09-30ip6tables: redirect supportKevin Krakauer
Adds support for the IPv6-compatible redirect target. Redirection is a limited form of DNAT, where the destination is always the localhost. Updates #3549. PiperOrigin-RevId: 334698344
2020-09-29Stop depending on go_binary targets.Adin Scannell
Closes #3374 PiperOrigin-RevId: 334505627
2020-09-29Add /proc/[pid]/cwdFabricio Voznika
PiperOrigin-RevId: 334478850
2020-09-29iptables: refactor to make targets extendableKevin Krakauer
Like matchers, targets should use a module-like register/lookup system. This replaces the brittle switch statements we had before. The only behavior change is supporing IPT_GET_REVISION_TARGET. This makes it much easier to add IPv6 redirect in the next change. Updates #3549. PiperOrigin-RevId: 334469418
2020-09-29Migrates uses of deprecated map types to recommended types.gVisor bot
PiperOrigin-RevId: 334419854
2020-09-28Fix lingering of TCP socket in the initial state.Nayana Bidari
When the socket is set with SO_LINGER and close()'d in the initial state, it should not linger and return immediately. PiperOrigin-RevId: 334263149
2020-09-28Support creating protocol instances with Stack refGhanan Gowripalan
Network or transport protocols may want to reach the stack. Support this by letting the stack create the protocol instances so it can pass a reference to itself at protocol creation time. Note, protocols do not yet use the stack in this CL but later CLs will make use of the stack from protocols. PiperOrigin-RevId: 334260210
2020-09-28Support inotify in overlayfs.Dean Deng
Fixes #1479, #317. PiperOrigin-RevId: 334258052
2020-09-27Clean up kcov.Dean Deng
Previously, we did not check the kcov mode when performing task work. As a result, disabling kcov did not do anything. Also avoid expensive atomic RMW when consuming coverage data. We don't need the swap if the value is already zero (which is most of the time), and it is ok if there are slight inconsistencies due to a race between coverage data generation (incrementing the value) and consumption (reading a nonzero value and writing zero). PiperOrigin-RevId: 334049207
2020-09-25Disable flaky java11 tests.Jamie Liu
Regarding ThreadCpuTimeArray.java: The test starts 10 threads, each of which does some computation, then blocks. When all threads are blocked, the test sleeps for 200ms, then checks that less than 100ns of CPU time in userspace elapse over the course of the sleep; AFAICT, the 100ns of slop is because a thread indicates that it's in the WAITING state before it actually blocks, and because signals can cause threads to be temporarily woken. gVisor's CPU clocks have a granularity of 10ms (the interval of Kernel.cpuClockTicker is //pkg/abi/linux.ClockTick), so a single tick pushes the test over the threshold. PiperOrigin-RevId: 333830287
2020-09-24Fix Nginx Startup and Size Benchmarks.Zach Koopmans
Changes in Nginx Benchmarks in network_tests also affect Startup/Size Nginx Benchmarks. Make sure the commands line up. PiperOrigin-RevId: 333543697
2020-09-24Change segment/pending queue to use receive buffer limits.Bhasker Hariharan
segment_queue today has its own standalone limit of MaxUnprocessedSegments but this can be a problem in UnlockUser() we do not release the lock till there are segments to be processed. What can happen is as handleSegments dequeues packets more keep getting queued and we will never release the lock. This can keep happening even if the receive buffer is full because nothing can read() till we release the lock. Further having a separate limit for pending segments makes it harder to track memory usage etc. Unifying the limits makes it easier to reason about memory in use and makes the overall buffer behaviour more consistent. PiperOrigin-RevId: 333508122
2020-09-24test/syscall/mknod: Don't use a hard-coded file nameAndrei Vagin
PiperOrigin-RevId: 333461380
2020-09-23Clean up inotify tests.Dean Deng
Mostly simplifies SKIP_IF statements and adds some more documentation. Also, mknod is now supported by gofer fs, so remove SKIP_IFs related to this. PiperOrigin-RevId: 333449932
2020-09-23Remove unused scripts.Ayush Ranjan
PiperOrigin-RevId: 333408633
2020-09-23Clean up flag.* usage in packetimpact's runner.RegisterFlagsZeling Feng
PiperOrigin-RevId: 333400865
2020-09-21Receive ACK when deleting address in syscall testsGhanan Gowripalan
PiperOrigin-RevId: 332961666
2020-09-21Fix socket_ipv4_udp_unbound_test_native in opensource.Zach Koopmans
Calls to recv sometimes fail with EAGAIN, so call select beforehand. PiperOrigin-RevId: 332943156
2020-09-21Fix proc_net_test_native for native tests.Zach Koopmans
"DefaultValueEqZero" is only valid if the test is in a sandbox. Our CI VMs often have "/proc/sys/net/ipv4/ip_forward" set to 1. PiperOrigin-RevId: 332910859
2020-09-21Add ftruncate test for writeable fd but no write permissions.Dean Deng
PiperOrigin-RevId: 332907453
2020-09-21Fix flakes in UdpSocketTestZach Koopmans
`recv` calls with MSG_DONTWAIT can fail with EAGAIN randomly in tests. Fix this by calling `select` on sockets with a timeout prior to attempting a `recv`. PiperOrigin-RevId: 332873735
2020-09-20Merge pull request #3651 from ianlewis:ip-forwardinggVisor bot
PiperOrigin-RevId: 332760843
2020-09-18Disable vdso_clock_gettime on KVM.Jamie Liu
Unfortunately, I think TSC misalignment means that we can't really expect any consistent correspondence between a TSC-based VDSO and the sentry's view of time on the KVM platform. PiperOrigin-RevId: 332576147
2020-09-18Deflake stat_test with save/restore enabled.Nicolas Lacasse
PiperOrigin-RevId: 332546659
2020-09-18Implement fsimpl/overlay.filesystem.RenameAt.Jamie Liu
Updates #1199 PiperOrigin-RevId: 332539197
2020-09-18Disable PHP test ext/standard/tests/streams/proc_open_bug60120.phpt.Jamie Liu
PiperOrigin-RevId: 332521647
2020-09-18Use a tmpfs file for shared anonymous and /dev/zero mmap on VFS2.Jamie Liu
This is more consistent with Linux (see comment on MM.NewSharedAnonMappable()). We don't do the same thing on VFS1 for reasons documented by the updated comment. PiperOrigin-RevId: 332514849
2020-09-18Remove SKIP_IF for now-supported features.Kevin Krakauer
Updates #3549. PiperOrigin-RevId: 332501660
2020-09-18Enqueue TCP sends arriving in SYN_SENT state.Mithun Iyer
TCP needs to enqueue any send requests arriving when the connection is in SYN_SENT state. The data should be sent out soon after completion of the connection handshake. Fixes #3995 PiperOrigin-RevId: 332482041
2020-09-17ip6tables: filter table supportKevin Krakauer
`ip6tables -t filter` is now usable. NAT support will come in a future CL. #3549 PiperOrigin-RevId: 332381801
2020-09-17{Set,Get} SO_LINGER on all endpoints.Nayana Bidari
SO_LINGER is a socket level option and should be stored on all endpoints even though it is used to linger only for TCP endpoints. PiperOrigin-RevId: 332369252
2020-09-17[testing] Use container address to talk to server running inside container.Ayush Ranjan
Docker does not have IPv6 port forwarding as tracked by the following issue: https://github.com/moby/moby/issues/11518 So when running bazel itself inside a docker container, we can not use the host port bindings to communicate with sockets inside the container. This was causing integration tests and image tests to fail when run through our Makefile targets. PiperOrigin-RevId: 332355051
2020-09-17Complete vfs2 implementation of fallocate.Dean Deng
This change includes overlay, special regular gofer files, and hostfs. Fixes #3589. PiperOrigin-RevId: 332330860
2020-09-17Merge pull request #3979 from jinmouil:feature/fuse-fixgVisor bot
PiperOrigin-RevId: 332328860
2020-09-17Fix kernfs unlinkat and rmdirat incorrect resolved path nameJinmou Li
2020-09-17Deflake vdso_clock_gettime test.Jamie Liu
PiperOrigin-RevId: 332281930
2020-09-17Disable nodejs12.4 test async-hooks/test-statwatcher.Jamie Liu
PiperOrigin-RevId: 332281912
2020-09-16Merge pull request #3934 from avagin:feature/fusegVisor bot
PiperOrigin-RevId: 332122081
2020-09-16Cleanup device name confusion in packetimpact testbenchZeling Feng
There are two device names on the test net. - The sniffer/injector device which is always a linux device. Only the testbench library is interested in this device. - The device which is on the DUT. It happens to be the same device as the former if DUT is linux. An individual test might be interested in this device if the test cares about the device name. PiperOrigin-RevId: 332112968
2020-09-16Automated rollback of changelist 329526153Nayana Bidari
PiperOrigin-RevId: 332097286
2020-09-16[runtime tests] Add documentation.Ayush Ranjan
Added a README describing what these tests are, how they work and how to run them locally. Also reorganized the exclude files into a directory. PiperOrigin-RevId: 332079697
2020-09-16FUSE readdir test fix ino initializationJinmou Li
2020-09-16test/fuse: use the getdents syscall instead of opendir/readdirAndrei Vagin
opendir() is a libc wrapper. Different libc-s can implement it differently.
2020-09-16test/fuse: clean upAndrei Vagin
2020-09-16fuse: fix a compile time errorAndrei Vagin
readdir_test.cc:134:24: error: variable length arrays are a C99 feature [-Werror,-Wvla-extension] char readdir_payload[readdir_payload_size];
2020-09-16Revert "fuse: add benchmarking support for FUSE"Andrei Vagin
test/fuse/benchmark/read_benchmark.cc:34: Failure Expected: (fuse_prefix) != (nullptr), actual: NULL vs (nullptr) external/com_google_benchmark/src/benchmark_runner.cc:120: RunInThread: Check `st.iterations() >= st.max_iterations' failed. Benchmark returned before State::KeepRunning() returned false! --- FAIL: Benchmarks_BM_Read/262144/real_time (0.29s) runner.go:502: test "Benchmarks.BM_Read/262144/real_time" failed with error exit status 134, want nil FAIL
2020-09-16Receive broadcast packets on interested endpointsGhanan Gowripalan
When a broadcast packet is received by the stack, the packet should be delivered to each endpoint that may be interested in the packet. This includes all any address and specified broadcast address listeners. Test: integration_test.TestReuseAddrAndBroadcast PiperOrigin-RevId: 332060652
2020-09-16Implement FUSE_UNLINKBoyuan He
Fixes #3696
2020-09-16Implement FUSE_SETATTRCraig Chi
This commit implements FUSE_SETATTR command. When a system call modifies the metadata of a regular file or a folder by chown(2), chmod(2), truncate(2), utime(2), or utimes(2), they should be translated to corresponding FUSE_SETATTR command and sent to the FUSE server. Fixes #3332
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 07:53:27 +0000