summaryrefslogtreecommitdiffhomepage
path: root/test
AgeCommit message (Collapse)Author
2020-11-23[1/3] Support isolated containers for parallel packetimpact testsZeling Feng
Summary of the approach: the test runner will set up a few DUTs according to a flag and pass all the test networks to the testbench. The testbench will only reside in a single container. The testbench will put all the test networks into a buffered channel which served as a semaphore and now the user can freely use t.Parallel() in (sub)tests and the true parallelism will be determined by how many DUTs are configured. Creating DUTs on demand is not supported yet, the test author should determine the number of DUTs to be used statically. Specifically in this change: - Don't export any global variables about the test network in testbench. - Sniffer only binds on the local interface because it will be possible to have multiple interfaces to multiple DUTs in a single testbench container. - Migrate existing tests to stop using global variables. PiperOrigin-RevId: 343965962
2020-11-23Fail gracefully if Docker is not configured with ipv6.Adin Scannell
PiperOrigin-RevId: 343927315
2020-11-23Omit sandbox from chown test.Adin Scannell
This test fails because it must include additional UIDs. Omit the bazel sandbox to ensure that it can function correctly. PiperOrigin-RevId: 343927190
2020-11-23Ignore permission failures in CheckDuplicatesRecursively.Adin Scannell
Not all files are always accessible by the process itself. This was specifically seen with map_files, but there's no rule that every entry must be accessible by the process itself. PiperOrigin-RevId: 343919117
2020-11-19Internal change.gVisor bot
PiperOrigin-RevId: 343419851
2020-11-19Propagate IP address prefix from host to netstackFabricio Voznika
Closes #4022 PiperOrigin-RevId: 343378647
2020-11-19Don't hold AddressEndpoints for multicast addressesGhanan Gowripalan
Group addressable endpoints can simply check if it has joined the multicast group without maintaining address endpoints. This also helps remove the dependency on AddressableEndpoint from GroupAddressableEndpoint. Now that group addresses are not tracked with address endpoints, we can avoid accidentally obtaining a route with a multicast local address. PiperOrigin-RevId: 343336912
2020-11-18[netstack] Move SO_KEEPALIVE and SO_ACCEPTCONN option to SocketOptions.Ayush Ranjan
PiperOrigin-RevId: 343217712
2020-11-18[netstack] Move SO_REUSEPORT and SO_REUSEADDR option to SocketOptions.Ayush Ranjan
This changes also introduces: - `SocketOptionsHandler` interface which can be implemented by endpoints to handle endpoint specific behavior on SetSockOpt. This is analogous to what Linux does. - `DefaultSocketOptionsHandler` which is a default implementation of the above. This is embedded in all endpoints so that we don't have to uselessly implement empty functions. Endpoints with specific behavior can override the embedded method by manually defining its own implementation. PiperOrigin-RevId: 343158301
2020-11-18[netstack] Move SO_NO_CHECK option to SocketOptions.Ayush Ranjan
PiperOrigin-RevId: 343146856
2020-11-18Remove the redundant containerIP parameterZeling Feng
PiperOrigin-RevId: 343144023
2020-11-18[netstack] Move SO_PASSCRED option to SocketOptions.Ayush Ranjan
This change also makes the following fixes: - Make SocketOptions use atomic operations instead of having to acquire/drop locks upon each get/set option. - Make documentation more consistent. - Remove tcpip.SocketOptions from socketOpsCommon because it already exists in transport.Endpoint. - Refactors get/set socket options tests to be easily extendable. PiperOrigin-RevId: 343103780
2020-11-17Add support for TTY in multi-containerFabricio Voznika
Fixes #2714 PiperOrigin-RevId: 342950412
2020-11-17Fix possible deadlock in UDP.Write().Bhasker Hariharan
In UDP endpoint.Write() sendUDP is called with e.mu Rlocked. But if this happens to send a datagram over loopback which ends up generating an ICMP response of say ErrNoPortReachable, the handling of the response in HandleControlPacket also acquires e.mu using RLock. This is mostly fine unless there is a competing caller trying to acquire e.mu in exclusive mode using Lock(). This will deadlock as a caller waiting in Lock() disallows an new RLocks() to ensure it can actually acquire the Lock. This is documented here https://golang.org/pkg/sync/#RWMutex. This change releases the endpoint mutex before calling sendUDP to resolve the possibility of the deadlock. Reported-by: syzbot+537989797548c66e8ee3@syzkaller.appspotmail.com Reported-by: syzbot+eb0b73b4ab486f7673ba@syzkaller.appspotmail.com PiperOrigin-RevId: 342894148
2020-11-17Fix SO_ERROR behavior for TCP in gVisor.Bhasker Hariharan
Fixes the behaviour of SO_ERROR for tcp sockets where in linux it returns sk->sk_err and if sk->sk_err is 0 then it returns sk->sk_soft_err. In gVisor TCP we endpoint.HardError is the equivalent of sk->sk_err and endpoint.LastError holds soft errors. This change brings this into alignment with Linux such that both hard/soft errors are cleared when retrieved using getsockopt(.. SO_ERROR) is called on a socket. Fixes #3812 PiperOrigin-RevId: 342868552
2020-11-16Reset watchdog timer between sendfile() iterations.Jamie Liu
As part of this, change Task.interrupted() to not drain Task.interruptChan, and do so explicitly using new function Task.unsetInterrupted() instead. PiperOrigin-RevId: 342768365
2020-11-16Remove ARP address workaroundGhanan Gowripalan
- Make AddressableEndpoint optional for NetworkEndpoint. Not all NetworkEndpoints need to support addressing (e.g. ARP), so AddressableEndpoint should only be implemented for protocols that support addressing such as IPv4 and IPv6. With this change, tcpip.ErrNotSupported will be returned by the stack when attempting to modify addresses on a network endpoint that does not support addressing. Now that packets are fully handled at the network layer, and (with this change) addresses are optional for network endpoints, we no longer need the workaround for ARP where a fake ARP address was added to each NIC that performs ARP so that packets would be delivered to the ARP layer. PiperOrigin-RevId: 342722547
2020-11-16Add packetimpact tests for ICMPv6 Error message for fragmentToshi Kikuchi
Updates #4427 PiperOrigin-RevId: 342703931
2020-11-13Requested Comment/Message wording changesJulian Elischer
PiperOrigin-RevId: 342366891
2020-11-13Disable save/restore in PartialBadBufferTest.SendMsgTCP.Jamie Liu
PiperOrigin-RevId: 342314586
2020-11-12Deflake tcp_socket test.Mithun Iyer
Increase the wait time for the thread to be blocked on read/write syscall. PiperOrigin-RevId: 342204627
2020-11-12Refactor SOL_SOCKET optionsNayana Bidari
Store all the socket level options in a struct and call {Get/Set}SockOpt on this struct. This will avoid implementing socket level options on all endpoints. This CL contains implementing one socket level option for tcp and udp endpoints. PiperOrigin-RevId: 342203981
2020-11-12Change AllocationSize to SizeWithPadding as requestedJulian Elischer
RELNOTES: n/a PiperOrigin-RevId: 342176296
2020-11-11Teach netstack how to add options to IPv4 packetsJulian Elischer
Most packets don't have options but they are an integral part of the standard. Teaching the ipv4 code how to handle them will simplify future testing and use. Because Options are so rare it is worth making sure that the extra work is kept out of the fast path as much as possible. Prior to this change, all usages of the IHL field of the IPv4Fields/Encode system set it to the same constant value except in a couple of tests for bad values. From this change IHL will not be a constant as it will depend on the size of any Options. Since ipv4.Encode() now handles the options it becomes a possible source of errors to let the callers set this value, so remove it entirely and calculate the value from the size of the Options if present (or not) therefore guaranteeing a correct value. Fixes #4709 RELNOTES: n/a PiperOrigin-RevId: 341864765
2020-11-10Add debug logs to startup benchmark.Zach Koopmans
PiperOrigin-RevId: 341757694
2020-11-10Internal changeJamie Liu
PiperOrigin-RevId: 341732791
2020-11-10Add all base and fs tests to Continuous Tests.Zach Koopmans
PiperOrigin-RevId: 341660511
2020-11-09Additions to ICMP and IPv4 parsersJulian Elischer
Teach ICMP.Parser/ToBytes to handle some non echo ICMP packets. Teach IPv4.Parser that fragments only have a payload, not an upper layer. Fix IPv4 and IPv6 reassembly tests to handle the change. Fixes #4758 PiperOrigin-RevId: 341549665
2020-11-09Skip `EventHUp` notify in `FIN_WAIT2` on a socket close.Mithun Iyer
This Notify was added as part of cl/279106406; but notifying `EventHUp` in `FIN_WAIT2` is incorrect, as we want to only notify later on `TIME_WAIT` or a reset. However, we do need to notify any blocked waiters of an activity on the endpoint with `EventIn`|`EventOut`. PiperOrigin-RevId: 341490913
2020-11-09net: connect to the ipv4 localhost returns ENETUNREACH if the address isn't setAndrei Vagin
cl/340002915 modified the code to return EADDRNOTAVAIL if connect is called for a localhost address which isn't set. But actually, Linux returns EADDRNOTAVAIL for ipv6 addresses and ENETUNREACH for ipv4 addresses. Updates #4735 PiperOrigin-RevId: 341479129
2020-11-09parameterize regexp in netdevs.ParseDevicesZeling Feng
PiperOrigin-RevId: 341470647
2020-11-09iptables: add documentation about enabing docker ipv6Kevin Krakauer
PiperOrigin-RevId: 341439435
2020-11-06Merge pull request #4719 from zhlhahaha:2005gVisor bot
PiperOrigin-RevId: 341172694
2020-11-06Change size of startup benchmark and lower number of startups.Zach Koopmans
PiperOrigin-RevId: 341155693
2020-11-06[vfs] Return EEXIST when file already exists and rp.MustBeDir() is true.Ayush Ranjan
This is consistent with what Linux does. This was causing a PHP runtime test failure. Fixed it for VFS2. PiperOrigin-RevId: 341155209
2020-11-06Implement command GETNCNT for semctl.Jing Chen
PiperOrigin-RevId: 341154192
2020-11-06Fix infinite loop when splicing to pipes/eventfds.Nicolas Lacasse
Writes to pipes of size < PIPE_BUF are guaranteed to be atomic, so writes larger than that will return EAGAIN if the pipe has capacity < PIPE_BUF. Writes to eventfds will return EAGAIN if the write would cause the eventfd value to go over the max. In both such cases, calling Ready() on the FD will return true (because it is possible to write), but specific kinds of writes will in fact return EAGAIN. This CL fixes an infinite loop in splice and sendfile (VFS1 and VFS2) by forcing skipping the readiness check for the outfile in send, splice, and tee. PiperOrigin-RevId: 341102260
2020-11-06Do not send to the zero portGhanan Gowripalan
Port 0 is not meant to identify any remote port so attempting to send a packet to it should return an error. PiperOrigin-RevId: 341009528
2020-11-05[runtime tests] Add partitions to runtime tests.Ayush Ranjan
This will allow us to run massive runtime tests live java to run in parallel across multiple jobs. PiperOrigin-RevId: 340956246
2020-11-05Fix failure setting OOM score adjustmentFabricio Voznika
When OOM score adjustment needs to be set, all the containers need to be loaded to find all containers that belong to the sandbox. However, each load signals the container to ensure it is still alive. OOM score adjustment is set during creation and deletion of every container, generating a flood of signals to all containers. The fix removes the signal check when it's not needed. There is also a race fetching OOM score adjustment value from the parent when the sandbox exits at the same time (the time it took to signal containers above made this window quite large). The fix is to store the original value in the sandbox state file and use it when the value needs to be restored. Also add more logging and made the existing ones more consistent to help with debugging. PiperOrigin-RevId: 340940799
2020-11-05[runtime tests] Exclude ext/pcre/tests/cache_limit.phpt.Ayush Ranjan
PiperOrigin-RevId: 340925131
2020-11-05Deflake semaphore_test.Jamie Liu
- Disable saving in tests that wait for EINTR. - Do not execute async-signal-unsafe code after fork() (see fork(2)'s manpage, "After a fork in a multithreaded program ...") - Check for errors returned by semctl(GETZCNT). PiperOrigin-RevId: 340901353
2020-11-04Make the regex for inet6Line in packetimpact/netdevs more accurateZeling Feng
PiperOrigin-RevId: 340763455
2020-11-02Implement command GETZCNT for semctl.Jing Chen
PiperOrigin-RevId: 340389884
2020-11-03ARM64:fuse:alian stat struct order on multiarchHoward Zhang
fields order in stat struct is different from x86 to arm64. Please refer to x86_64-linux-gnu/bits/stat.h aarch64-linux-gnu/bits/stat.h Signed-off-by: Howard Zhang <howard.zhang@arm.com>
2020-11-02Clean up the code of setupTimeWaitCloseAndrei Vagin
The active_closefd has to be shutdown only for write, otherwise the second poll will always return immediately. The second poll should not be called from a separate thread. PiperOrigin-RevId: 340319071
2020-11-02Block external network for testsAndrei Vagin
And in this case, tests will run in separate network namespaces and will not affect each other. PiperOrigin-RevId: 340267734
2020-11-01Fix returned error when deleting non-existant addressIan Lewis
PiperOrigin-RevId: 340149214
2020-10-31net/tcpip: connect to unset loopback address has to return EADDRNOTAVAILAndrei Vagin
In the docker container, the ipv6 loopback address is not set, and connect("::1") has to return ENEADDRNOTAVAIL in this case. Without this fix, it returns EHOSTUNREACH. PiperOrigin-RevId: 340002915
2020-10-30Separate kernel.Task.AsCopyContext() into CopyContext() and OwnCopyContext().Jamie Liu
kernel.copyContext{t} cannot be used outside of t's task goroutine, for three reasons: - t.CopyScratchBuffer() is task-goroutine-local. - Calling t.MemoryManager() without running on t's task goroutine or locking t.mu violates t.MemoryManager()'s preconditions. - kernel.copyContext passes t as context.Context to MM IO methods, which is illegal outside of t's task goroutine (cf. kernel.Task.Value()). Fix this by splitting AsCopyContext() into CopyContext() (which takes an explicit context.Context and is usable outside of the task goroutine) and OwnCopyContext() (which uses t as context.Context, but is only usable by t's task goroutine). PiperOrigin-RevId: 339933809
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 07:38:05 +0000