Age | Commit message (Collapse) | Author |
|
Currently this test produces an error resembling
tcp_zero_window_probe_retransmit_test.go:92: zero probe came sooner interval 3200179405 probe 4
which is approximately useless.
PiperOrigin-RevId: 319572263
|
|
Before this change, running packetimpact tests produces:
parameter 'direct' must contain a list of elements, and may no longer
accept a depset. The deprecated behavior may be temporarily re-enabled
by setting --incompatible_disable_depset_inputs=false
The positional parameter to depset has been changed to mean `direct`
rather than its previous meaning of `items`. The documentation[0]
explains:
A positional parameter distinct from other parameters for legacy
support.
If --incompatible_disable_depset_items is false, this parameter
serves as the value of items.
If --incompatible_disable_depset_items is true, this parameter
serves as the value of direct.
See the documentation for these parameters for more details.
[0] https://docs.bazel.build/versions/master/skylark/lib/globals.html
PiperOrigin-RevId: 319555138
|
|
We do not support RWF_SYNC/RWF_DSYNC and probably shouldn't silently accept
them, since the user may incorrectly believe that we are synchronizing I/O.
Remove the pwritev2 test verifying that we support these flags.
gvisor.dev/issue/2601 is the tracking bug for deciding which RWF_.* flags
we need and supporting them.
Updates #2923, #2601.
PiperOrigin-RevId: 319351286
|
|
We were not invalidating mappings when the file size changed in shared mode.
Enabled the syscall test for vfs2.
Updates #2923
PiperOrigin-RevId: 319346569
|
|
Currently, we always perform a full-file sync which could be extremely
expensive for some applications. Although vfs1 did not fully support
sync_file_range, there were some optimizations that allowed us skip some
unnecessary write-outs.
Updates #2923, #1897.
PiperOrigin-RevId: 319324213
|
|
The application can choose to initiate a non-blocking connect and
later block on a read, when the endpoint is still in SYN-SENT state.
PiperOrigin-RevId: 319311016
|
|
After we change credentials, it is possible that we no longer have access to
the sticky directory where we are trying to delete files. Use an open fd so
this is not an issue.
PiperOrigin-RevId: 319306255
|
|
PiperOrigin-RevId: 319283715
|
|
... so that Fuchsia gets the same special cases applied to gVisor in tests when
this envrionment variable is set.
PiperOrigin-RevId: 319239064
|
|
- Support FIOASYNC, FIO{SET,GET}OWN, SIOC{G,S}PGRP (refactor getting/setting
owner in the process).
- Unset signal recipient when setting owner with pid == 0 and
valid owner type.
Updates #2923.
PiperOrigin-RevId: 319231420
|
|
a) When GSO is in use we should not cap the segment to maxPayloadSize in
sender.maybeSendSegment as the GSO logic will cap the segment to the correct
size. Without this the host GSO is not used as we end up breaking up large
segments into small MSS sized segments before writing the packets to the
host.
b) The check to not split a segment due to it not fitting in the receiver window
when there are pending segments is incorrect as segments in writeList can be
really large as we just take the write call's buffer size and create a single
large segment. So a write of say 128KB will just be 1 segment in the
writeList.
The linux code checks if 1 MSS sized segments fits in the receiver's window
and if not then does not split the current segment. gVisor's check was
incorrect that it was checking if the whole segment which could be >>> 1 MSS
would fit in the receiver's window. This was causing us to prematurely stop
sending and falling back to retransmit timer/probe from the other end to send
data.
This was seen when running HTTPD benchmarks where @ HEAD when sending large
files the benchmark was taking forever to run.
The tcp_splitseg_mss_test.go is being deleted as the test as written doesn't
test what is intended correctly. This is because GSO is enabled by default and
the reason the MSS+1 sized segment is sent is because GSO is in use. A proper
test will require disabling GSO on linux and netstack which is going to take a
bit of work in packetimpact to do it correctly.
Separately a new test probably should be written that verifies that a segment >
availableWindow is not split if the availableWindow is < 1 MSS.
Fixes #3107
PiperOrigin-RevId: 319172089
|
|
-Waddress-of-packed-member warns on inet_aton() being used with a packed struct
member. This was added in cl/291990716.
PiperOrigin-RevId: 319111253
|
|
This includes the provisional style guide in the website and fixes the broken
link from CONTRIBUTING.md. The style guide will be located under the "Community"
category as it's related to contributing to the project.
Also, add missing includes that were causing some presubmits to fail.
PiperOrigin-RevId: 319061410
|
|
Bring udp_socket_test into complianc by:
- Eliminating IsRunningOnGvisor() invocations.
- Wrapping sockets in RAII FileDescriptor objects.
- Creating a Bind() method so that the first bind happens on port 0.
PiperOrigin-RevId: 318909396
|
|
Also make some fixes to vfs1's F_SETOWN. The fcntl test now entirely passes
on vfs2.
Fixes #2920.
PiperOrigin-RevId: 318669529
|
|
Updates #2923.
PiperOrigin-RevId: 318648128
|
|
PiperOrigin-RevId: 318585377
|
|
IPv6 raw sockets never include the IPv6 header.
PiperOrigin-RevId: 318582989
|
|
SO_NO_CHECK is used to skip the UDP checksum generation on a TX socket
(UDP checksum is optional on IPv4).
Test:
- TestNoChecksum
- SoNoCheckOffByDefault (UdpSocketTest)
- SoNoCheck (UdpSocketTest)
Fixes #3055
PiperOrigin-RevId: 318575215
|
|
The Option Type identifiers are internally encoded such that their
highest-order two bits specify the action that must be taken if the
processing IPv6 node does not recognize the Option Type:
00 - skip over this option and continue processing the header.
01 - discard the packet.
10 - discard the packet and, regardless of whether or not the
packet's Destination Address was a multicast address, send an
ICMP Parameter Problem, Code 2, message to the packet's
Source Address, pointing to the unrecognized Option Type.
11 - discard the packet and, only if the packet's Destination
Address was not a multicast address, send an ICMP Parameter
Problem, Code 2, message to the packet's Source Address,
pointing to the unrecognized Option Type.
PiperOrigin-RevId: 318566613
|
|
PiperOrigin-RevId: 318563543
|
|
- IPv6 HopByHop Options Extension Header
- IPv6 Destination Options Extension Header
PiperOrigin-RevId: 318551425
|
|
Also, while we're here, make sure that gofer inotify events are generated when
files are created in remote revalidating mode.
Updates #1479.
PiperOrigin-RevId: 318536354
|
|
|
|
|
|
This change adds a FUSE character device backed by devtmpfs. This
device will be used to establish a connection between the FUSE
server daemon and fusefs. The FileDescriptionImpl methods will
be implemented as we flesh out fusefs some more. The tests assert
that the device can be opened and used.
|
|
- Support writing on proc/[pid]/{uid,gid}map
- Return EIO for writing to static files.
Updates #2923.
PiperOrigin-RevId: 318188503
|
|
PiperOrigin-RevId: 318180382
|
|
Updates #2912 #1035
PiperOrigin-RevId: 318162565
|
|
For TCP sockets, SO_REUSEADDR relaxes the rules for binding addresses.
gVisor/netstack already supported a behavior similar to SO_REUSEADDR, but did
not allow disabling it. This change brings the SO_REUSEADDR behavior closer to
the behavior implemented by Linux and adds a new SO_REUSEADDR disabled
behavior. Like Linux, SO_REUSEADDR is now disabled by default.
PiperOrigin-RevId: 317984380
|
|
Support is limited to the functionality that exists in VFS1.
Updates #2923 #1035
PiperOrigin-RevId: 317981417
|
|
Events were only skipped on parent directories after their children were
unlinked; events on the unlinked file itself need to be skipped as well.
As a result, all Watches.Notify() calls need to know whether the dentry where
the call came from was unlinked.
Updates #1479.
PiperOrigin-RevId: 317979476
|
|
PiperOrigin-RevId: 317973144
|
|
Because there is no inode structure stored in the sandbox, inotify watches
must be held on the dentry. This would be an issue in the presence of hard
links, where multiple dentries would need to share the same set of watches,
but in VFS2, we do not support the internal creation of hard links on gofer
fs. As a result, we make the assumption that every dentry corresponds to a
unique inode.
Furthermore, dentries can be cached and then evicted, even if the underlying
file has not be deleted. We must prevent this from occurring if there are any
watches that would be lost. Note that if the dentry was deleted or invalidated
(d.vfsd.IsDead()), we should still destroy it along with its watches.
Additionally, when a dentry’s last watch is removed, we cache it if it also
has zero references. This way, the dentry can eventually be evicted from
memory if it is no longer needed. This is accomplished with a new dentry
method, OnZeroWatches(), which is called by Inotify.RmWatch and
Inotify.Release. Note that it must be called after all inotify locks are
released to avoid violating lock order. Stress tests are added to make sure
that inotify operations don't deadlock with gofer.OnZeroWatches.
Updates #1479.
PiperOrigin-RevId: 317958034
|
|
Per manual page:
"All applications must properly handle a return of DT_UNKNOWN."
PiperOrigin-RevId: 317957013
|
|
It preserves the same functionality (almost none) as in VFS1.
Updates #2923 #1035
PiperOrigin-RevId: 317943522
|
|
PiperOrigin-RevId: 317941748
|
|
Updates #2923.
PiperOrigin-RevId: 317700049
|
|
Despite what the man page says, linux will return EINVAL when calling
getdents() an a /proc/[tid]/net file corresponding to a zombie task. This
causes readdir() to return a null pointer AND errno=EINVAL.
See fs/proc/proc_net.c:proc_tgid_net_readdir() for where this occurs.
We have tests that recursively read /proc, and are likely to hit this when
running natively, so we must catch and handle this case.
PiperOrigin-RevId: 317674168
|
|
I forgot to update getdents earlier. Several thousand runs of the fsync and
proc_net_unix tests all passed as well.
Updates #2923.
PiperOrigin-RevId: 317415488
|
|
PiperOrigin-RevId: 317377571
|
|
Like vfs1, we have a trivial implementation that ignores all valid advice.
Updates #2923.
PiperOrigin-RevId: 317349505
|
|
Check for unsupported flags, and silently support RWF_HIPRI by doing nothing.
From pkg/abi/linux/file.go: "gVisor does not implement the RWF_HIPRI feature,
but the flag is accepted as a valid flag argument for preadv2/pwritev2."
Updates #2923.
PiperOrigin-RevId: 317330631
|
|
Updates #2923.
PiperOrigin-RevId: 317314460
|
|
Always check if a synthetic file already exists at a location before creating a
file there, and do not try to delete synthetic gofer files from the remote fs.
This fixes runsc_ptrace socket tests that create/unlink synthetic, named socket
files.
Updates #2923.
PiperOrigin-RevId: 317293648
|
|
Updates #2923.
PiperOrigin-RevId: 317246916
|
|
Updates #2923
PiperOrigin-RevId: 317185798
|
|
Updates #2972
PiperOrigin-RevId: 317113059
|
|
Updates #173,#6
Fixes #2888
PiperOrigin-RevId: 317087652
|
|
This currently doesn't work with VSF2. Add test to ensure
it's not missed.
Updates #1487
PiperOrigin-RevId: 317013792
|